DEUTSCH NEDERLANDS ENGLISH ESPAÑOL FRANÇAIS PORTUGUÊS BT3000
BT3000 / English instruction manual Table of contents PACKAGE CONTENTS…………………………………………………………..2 FEATURES……………………………………………………………………………2 SAFETY PRECAUTION…………………………………………………………..3 CONTROLS…………………………………………………………………………..4 REMOTE CONTROL BATTERY………………………………………………..5 GENERAL OPERATION………………………………………………………….6 TROUBLESHOOTING……………………………………………………….……8 SPECIFICATION…………………………………………………………………….8 TRADEMARK………………………………………………………………………..8 RECYCLING…………………………………………………………………………..
BT3000 / English instruction manual Package contents - Main Unit Remote control function with battery type CR2025 (included) Detachable power cord 3.5mm AUX IN cable x 1 Instruction Manual x 1 Quick Start Guide x 1 Features - 3.
BT3000 / English instruction manual Safety precaution 1. Water and Moisture – The unit should not be used near water. For 2. 3. 4. 5. 6. 7. 8. 9. example: near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement. Ventilation – The unit should be situated so that its location or position does not interfere with its proper ventilation. For example, it should not be situated on a bed, sofa, rug or similar surface that may block ventilation openings.
BT3000 / English instruction manual time. This will prevent damage to the product due to lightning and power‐line surges. 10. Overloading – Do not overload wall sockets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. 11. Damage Requiring Service – The unit should be serviced by qualified service personnel when A. the power supply cable or plug has been damaged. B. objects have fallen into or liquid has been spilled into the enclosure. C.
BT3000 / English instruction manual from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling. WARNINGS Batteries are to be inserted with the correct polarity. Never use batteries that show signs of electrolyte leaks or cracking.
BT3000 / English instruction manual Technical Specification : AC 100‐240V, 50/ 60Hz Power supply (CR2025) Battery for remote control : 3V Power consumption : 140W : Appr. 250W max. Output power Standby mode consumption : 0.45W Bluetooth effective distance : 10meters open air AUX in jack : 3.5mm : V2.
BT3000 / English instruction manual FRONT PANEL REAR PANEL EN- 7
BT3000 / English instruction manual REMOTE CONTROL 1. 2. 3. 4. 5. 6. 7. 8. 9. Power / Pairing / Function Volume – Volume + AUX(Green) / Bluetooth(Blue) / Standby(Red) indicator Remote sensor AUX jack AC socket Power on/off Bluetooth switch EN- 8 10. Mute 11. Previous 12. Bass up 13. Bass down 14. Pairing 15. AUX switch 16. Play / Pause 17. Next 18. Volume up 19.
BT3000 / English instruction manual Remote control battery 1. Slide and hold the battery release tab in the direction of the arrow. 2. Pull out the battery holder and remove the old battery. 3. Replace with a new battery (CR2025). 4. Insert the battery holder back into the remote control. Powering up your unit To power the player ON: 1. Plug AC cord into AC jack, and plug into a live AC wall outlet. 2.
BT3000 / English instruction manual Note: To save power, the player will switch to economic standby mode when the speaker is idle for 15 minutes. Using Bluetooth Function: Paring Your Device Before your start Your Bluetooth device (cellphone, MP3 player, computer, etc.) must support the A2DP Bluetooth profile (Commonly known as stereo audio profile) to work with the player. Many of the latest mobile phones and PCs with built‐in Bluetooth functionality will support this profile.
BT3000 / English instruction manual 4. Once paired with a device, the Blue light will stop flashing and glow steadily. A beep sound will also indicate that the connection is established. 5. Pairing remains intact even when the player or the Bluetooth device is powered off or is taken out of link range. The player will auto link with the last linked device when that device is in range. Note: Connecting to a Bluetooth device may take up to 5 minutes.
BT3000 / English instruction manual 2. Turn on the player and press the Power/Pairing/Function button on the top panel or the Bluetooth button on the remote control to select the Bluetooth mode, Blue light indicates for Bluetooth mode. button on the remote control to play 3. Press the your Bluetooth‐enable device. (Depending on the Bluetooth device you are using, you may need to manually go into media player mode on your device to make it work properly) button on the remote control to skip the 4.
BT3000 / English instruction manual 2. Press the Power/Pairing/Function button on the top panel or press the AUX button on the remote control to select the AUX mode. Green light indicates Aux Mode also. 3. Set your personal audio player/computer to PLAY. Headphone socket z z z z z 3.
BT3000 / English instruction manual Troubleshooting There is no power to the player z Ensure that the Power Switch of wall socket is physically set to the ON position. z Ensure that the AC plug is securely connected to the player and proper wall outlet. z Trouble pairing device/computer with the player z Make sure you have the latest firmware for your iPhone /iPad/iPod. z Make sure your device is working properly. Check your device’s manual for details on Bluetooth pairing and linking.
BT3000 / English instruction manual This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2002/96/EC in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.