TSB-60723, TPBS-6/0294, 2199996 Wireless Disco Party Ball Table-Top Speaker INSTRUCTION MANUAL PLEASE READ ALL INSTRUCTIONS CAREFULLY AND RETAIN FOR FUTURE USE 1
Getting Started Remove the unit from the box. Remove any packaging from the product. Please retain all packaging after you have checked and counted all the parts and the contents against the list.
11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel.
INSTRUCTIONS FOR USE 1. Connect the provided power adapter to the DC IN of the speaker and plug the adapter to a wall port. Red indicator will light on. 2. Press and hold the POWER ON/OFF Button of the unit to turn on the unit from standby mode. 3. Short press the SOURCE Button each time to switch to desired mode, the color of the indicator will turn accordinglyGreen : FM mode Blue : Bluetooth mode Purple : AUX mode 4.
Function Operation Increase / Playing music Decrease Volume Button Press the VOL + or VOL – Button to increase or decrease the volume. or Adjust volume from the source device. Next Track Playing music A short press on the Button to will take you to the next track Tips!! Short press the SOURCE Button each time to switch different functions of the speaker. The functions are – FM / Bluetooth / AUX. Listening to Music using AUX-In 1. Turn on the speaker. 2.
Product Specifications: Bluetooth version : 2.1 + EDR Speaker output : 2 x 3W Unit size : 17.3” x 4.7” x 4.7” Unit weight : 2.4 lb Power supply : AC/DC adaptor (Input: AC 100-240V 50/60Hz 0.5A, Output: DC 5.8V 1.5A centre positive) Bluetooth range : 27 - 33 Feet FM radio frequency : 87.5 – 108MHz TROUBLESHOOTING Problem Possible Cause Solution No power AC/DC adapter plug not connected to Plug to the wall outlet. the wall outlet No sound Volume in minimum position.
- Increase the separation between the product and receiver. - Connect the product into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. The device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: Manufacturer cannot assume responsibility for loss or damage during incoming shipment. As a precautionary measure, carefully package the product for shipment, and insure it with the carrier. Be sure to enclose the following details with the product: your full name, return address and daytime phone number, a note describing the problem you experienced, a copy of your sales receipt or other proof of purchase to determine warranty status. C.O.D. shipments cannot be accepted.
