JWM6A MOBILE AUDIO SYSTEM Installation and Operation Manual
JWM6A CONTENTS Copyrights and Trademarks All related marks and logos are trademarks of Sirius XM Radio Inc. All rights reserved. Introduction............................................................................................................................... 1 Disc Notes ................................................................................................................................ 2 Installation ...................................................................................
JWM6A INTRODUCTION Thank You! Thank you for choosing a Jensen product. We hope you will find the instructions in this owner’s manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to use all the features of your new Jensen receiver for maximum enjoyment. Features moisture. Avoid Cleaning Products. The front of this unit should only be cleaned with a slightly damp cloth. Do not use cleansers. Use Recommended Accessories.
JWM6A DISC NOTES Depending on the recording status, conditions of the disc, and the equipment used for recording, some CD-Rs/CD-RWs may not play on this unit. For more reliable playback, please adhere to the following recommendations: Use CD-RWs with speed 1x to 4x and write with speed 1x to 2x. Use CD-Rs with speed 1x to 8x and write with speed 1x to 2x. Do not play a CD-RW which has been written more than 5 times.
JWM6A INSTALLATION It’s a good idea to read all of the instructions before beginning the installation. We recommend having your Jensen JWM6A installed by a reputable RV dealership NOTE: Before cutting the mounting hole, make sure the area behind the mounting location is clear of wires, fuel and vacuum or brake lines.
JWM6A WIRING WARNING: Wiring harness comes with stripped and tinned leads to aid in the installation process. Any unused speaker wires must have their exposed ends cut off or insulated individually. The wiring diagram depicts all the wiring connections required for proper operation of the unit. DETAIL A SHOWN FROM PIN VIEW PIN NO.
JWM6A BASIC OPERATION Audio Menu 1. 2. 3. 4. The following audio menu items can be adjusted: BASS: Adjust the Bass level range from “-7” to “+7”. TREBLE: Adjust the Treble level range from “-7” to “+7”. BALANCE: Adjust the Balance between the left and right speakers from “LEFT 7” (full left) to “RIGHT 7” (full right). “0” indicated an equal balance between the left and right speakers.
JWM6A Bluetooth (On/Off): Choose “Bluetooth On” or “Bluetooth Off”. PRESET VOL:(1/40-40/40): Select an automatic turn-on volume. RESET : Press the ENTERSEARH button to return the JWM6A to factory default set up values. Liquid Crystal Display (LCD) The current activated functions and time are shown on the LCD panel (1). Auxiliary Input Function NOTE: LCD panels may take longer to respond when subjected to cold temperatures for an extended period of time.
JWM6A Remote Sensor Infrared receiver (17) is located on the front panel to receive infrared signal emitted by the remote control. Speaker Output The three speaker output buttons (A SPEAKERS (19), B SPEAKERS (21) and C SPEAKERS (23)) control speaker output from the radio. Press any of the three buttons to turn the corresponding speaker sets on or off. SPK A, SPK B or SPK C will appear on the display.
JWM6A TUNER OPERATION Recall a Station Select a band (if needed). Press a 1-6 preset button to select the corresponding stored station. Automatically Store / Preset Scan (AS/PS) Automatically Store Select an AM or FM band. Press and hold the AS/PS button (25) for more than 3 seconds and the unit will automatically scan for and store 12 or 18 strongest stations for AM or FM respectively. To stop this function before the automatic storing is complete, press AS/PS again. Preset Scan Select a band.
JWM6A DISC OPERATION Track Select Press the >>| button (16) or |<< button (15) to advance to the previous or next track on the CD. The selected track number will appear on the display. Press the || button to start the playback of the selected track. Fast Forward/Reverse Press and hold the >>| button (16) or |<< buttons (15) or press the >> or << buttons on the remote control (16) once for FORWARD X 2. Press and hold additional times for FORWARD X 4, X 8, X 20 or PLAY.
JWM6A GOTO Direct Track/Chapter Access MENU Select Use the GOTO function to access a track (chapter) directly. 1. Press the GOTO button (25) on the remote control. The On Screen Display information will appear with the track number highlighted. 2. Use the number keys on the remote control to enter the 3-digit track number directly (i.e. for track 10, enter “010”. 3. Press the ENTER button (5) to confirm and begin playback. While in menu mode, press the BAND DVD MENU button (12) to select a menu option.
JWM6A SUBTITLE: Press to select an alternate subtitle language, if available, ANGLE: Press to select an alternate viewing angle, if available. ZOOM: Press to zoom the picture at ZOOM 2, ZOOM 3, ZOOM 4, ZOOM 1/2, ZOOM 1/3 or ZOOM 1/4, or select OFF to return to normal view. NOTE: Feature availability is dependent upon DVD embedded information.
JWM6A MP3/USB OPERATION skipped Maximum number of folders: 512 (including skipped directories) Maximum number of folder levels: 12 Maximum number of MP3 files: 999 Maximum number of characters for MP3 file name and folder name: 32 Maximum number of Characters of ID3 Tag: ID3 Tag version 1.0: 32 ID3 Tag version 2.x: 32 MP3 Monitor Display After loading an MP3 disc or USB device, the following screen will appear on your output monitor.
JWM6A current disc. Press 1 GOTO Direct Track/Chapter Access again to end the scan and play the selected track. Repeat (RPT) Use the GOTO function to access a track (chapter) directly. 1. Press the GOTO button (25) on the remote control. The On Screen Display information will appear with the track number highlighted. 2. Use the number keys on the remote control to enter the 3-digit track number directly (i.e. for track 10, enter “010”. 3. Press the ENTER button (5) to confirm and begin playback.
JWM6A iPod® OPERATION Songs” when it enters iPod mode. When iPod is disconnected, it will automatically back to the previous mode before the USB is connected. During other playback mode, when USB is connected, press MODE DISPLAY button to enter USB playback mode directly. This unit is equipped with an iPod® ready function that will allow you to control your iPod (if compatible) using the control panel buttons.
JWM6A Search Mode Press and hold the ENTER SEARCH button (20) for more than 2 seconds to enter iPod search mode and choose from the following search criteria: Playlist, Artist, Album, Song, Genre, Composer, Audiobooks and Podcasts (consecutively). When search mode is selected, press the ENTER SEARCH button to confirm selection. Use the |<< / >>| button (15/16) to navigate through various list selections. Press ENTER SEARCH to make your final selection.
JWM6A BLUETOOTH OPERATION The JWM6A includes built-in Bluetooth technology that allows you to connect this head unit to Bluetooth-enabled devices for streaming audio playback. About Bluetooth Technology Bluetooth wireless technology is a short-range wireless radio protocol. Operating in the 2.4 GHz range, it transmits audio and data at speeds up to 2.1 Mbit/s over a range of up to 10 meters.
JWM6A button (5) to return to Bluetooth mode and resume mobile device audio playback. APP OPERATION NOTE: If a Bluetooth device is disconnected due to the power being turned off or if the device is out of range, the unit will automatically search for the matching Bluetooth mobile device when the power is restored. JENSEN® Specialty Controller is the ultimate wireless remote control for your JENSEN stereo system.
JWM6A REMOTE CONTROL OPERATION REF DESCRIPTION TUNER WEATHERBAND BLUETOOTH CD/MP3/USB DVD Turn radio on/standby mode. Adjust volume up/down. Press for Audio Control Setup menu. Tune to higher station. Turn radio on/standby mode. Adjust volume up/down. Press for Audio Control Setup menu. Turn radio on/standby mode. Adjust volume up/down. Press for Audio Control Setup menu. Turn radio on/standby mode. Adjust volume up/down. Press for Audio Control Setup menu. Tune to lower station.
JWM6A 19 TITLE 20 RPT 21 SOURCE 22 ZOOM 23 ANGLE 24 AUD 25 GOTO 26 Display 27 AS/PS 28 MENU Repeat track. Select source for playback. Select source for playback. Select source for playback. Select source for playback. Access Audio Menu options. Access Audio Menu options. Access Audio Menu options. Access Audio Menu options. Select exact time, track or chapter for playback. Display current playback information on the screen. Browse preset stations (10 sec. interval).
JWM6A DVD SETUP MENU Language Setup Press the (setup) button (10) on the remote control to access the SETUP menu and adjust system settings for the following categories: System Setup Language Setup Audio Setup Video Setup Speaker Setup Digital Setup The Language Setup menu controls the following features: While in the setup menus, use your directional arrows to select and change settings.
JWM6A Video Setup Digital Setup The Video Setup menu controls the following features: The Digital Setup menu controls the following features: Brightness: Adjust the brightness of the screen from the following levels: 12, 10, 8, 6, 4, 2 or 0. Contrast: Adjust the contrast of the screen from the following levels: 12, 10, 8, 6, 4, 2 or 0. Hue: Adjust the hue of the screen from the following levels: +6, +4, +2, 0, -2, - 4 or - 6.
JWM6A CARE AND MAINTENANCE TROUBLESHOOTING Keep the product dry. If it does get wet, wipe it dry immediately. Liquids might contain minerals that can corrode the electronic circuits. Keep the product away from dust and dirt, which can cause premature wear of parts. Handle the product gently and carefully. Dropping it can damage circuit boards and cases, and can cause the product to work improperly. Wipe the product with a dampened cloth occasionally to keep it looking new.
JWM6A SPECIFICATIONS FCC Notes FM Tuner Frequency Coverage (USA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87.5 to 107.9 MHz Frequency Coverage (Europe) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87.5 to 108 MHz Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <4 μV Stereo Separation@1 kHz . . . . . . . . . . . . . . . . . . . . . . . . . .
ASA Electronics Corporation www.asaelectronics.com www.jensenrvdirect.