JWM1A MOBILE AUDIO SYSTEM Owner’s Manual
JWM1A CONTENTS Introduction............................................................................................................................... 3 Installation ................................................................................................................................ 4 Wiring ....................................................................................................................................... 5 Basic Operation .................................................
JWM1A INTRODUCTION Packing List Thank You! Thank you for choosing a Jensen product. We hope you will find the instructions in this owner’s manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to use all the features of your new Jensen receiver for maximum enjoyment.
JWM1A INSTALLATION It’s a good idea to read all of the instructions before beginning the installation.
JWM1A WIRING The wiring diagram depicts all the wiring connections required for proper operation of the unit. DETAIL A SHOWN FROM PIN VIEW PIN NO.
JWM1A Sleep Mode Sleep: The Sleep Timer will automatically turn off the JWM1A in the designated number of minutes. To set the Sleep Time, press VOL +/- repeatedly to change the sleep time from 0(off), 15, 30 or 60 minutes. BASIC OPERATION Setting the alarm Alarm ON/OFF: Press VOL +/- to turn on and off the alarm. The “ALARM” icon will show on the display. Alarm Hour: The number representing the hours will flash. Press VOL +/- to adjust the alarm hour.
JWM1A TUNER OPERATION Clock Display Press the T/F button (9) to alternate the display between Playback mode and clock time while in Tuner, Bluetooth or auxiliary input mode. Clock Setup Press and hold the T/F button (9) to access Clock Setup mode. The number representing the hours will flash. Press VOL +/- buttons to adjust the hour. Press T/F again briefly and the number representing the minutes will flash. Press the VOL +/- buttons to adjust the minutes.
JWM1A BLUETOOTH OPERATION Bluetooth Menu Options The JWM1A includes built-in Bluetooth technology that allows you to connect this head unit to Bluetooth-enabled devices for streaming audio playback. 1. 2. 3. About Bluetooth Technology 4. Bluetooth wireless technology is a short-range wireless radio protocol. Operating in the 2.4 GHz range, it transmits audio and data at speeds up to 2.1 Mbit/s over a range of up to 10 meters.
JWM1A Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <30 μV Amplifier Output Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 x 6 Watts per Channel Output Impedance . . . . . . . . . . . . . . . Compatible with 4-8 ohms speakers, 4 ohm load minimum Total System Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .