JHD36A AM/ FM/ RBDS/ WB/ USB/ AUX-IN/ BT/ Sirius XM Ready/ APP Ready Heavy Duty Radio Installation and Operation Manual
JHD36A CONTENTS Introduction............................................................................................................................... 3 Safety Information .................................................................................................................... 4 Installation ................................................................................................................................ 5 Wiring ................................................................
JHD36A INTRODUCTION System Features Content List Features of Jensen JHD36A mobile audio system include: Full Dot Matrix LCD AM/ FM US/ EURO Tuner with 30 Presets (12AM, 18FM) RBDS (Radio Broadcast Data Service) with PTY Search Sirius XM Radio Ready USB Playback of MP3 and WMA files CD ESP (Electronic Skip Protection) 30 Sec iPod Ready (USB Interface) Weatherband Tuner with SAME Technology Mute Bluetooth (Supports A2DP, AVRCP, SPP and HFP) Pre-set Equalizer – 5 settings (User, Flat,
JHD36A SAFETY INFORMATION Compatible Disc Types When Driving Table 1: General Disc Information Keep the volume level low enough to be aware of the road and traffic conditions. Disc Type When Washing Your Vehicle Do not expose the product to water or excessive moisture. Moisture can cause electrical shorts, fire or other damage.
JHD36A INSTALLATION 4. This unit is designed for installation in vehicle cabs with an existing 1-DIN radio opening. In many cases, a special installation kit will be required to mount the radio to the dashboard. See the dealer where the radio was purchased for kit availability. Always check the kit application before purchasing to make sure the kit works with your vehicle. 5. 6. Before you Begin 1. 2. Disconnect Battery Before you begin, always disconnect the battery negative terminal.
JHD36A WIRING DETAIL A SHOWN FROM PIN VIEW PIN NO. DESCRIPTION A1 RIGHT REAR SPEAKER (+) A2 RIGHT FRONT SPEAKER (+) A3 LEFT FRONT SPEAKER (+) A4 LEFT REAR SPEAKER (+) A5 LEFT REAR SPEAKER () A6 LEFT FRONT SPEAKER () A7 RIGHT FRONT SPEAKER () A8 RIGHT REAR SPEAKER () B1 NO CONNECTION B2 NO CONNECTION B3 NO CONNECTION B4 NO CONNECTION B5 GROUND B6 NO CONNECTION B7 +12V ACC SWITCHED B8 NO CONNECTION WARNING! Do not connect the +12VDC ACC switched wire to the battery.
JHD36A BASIC OPERATION Mute Press the MUTE button (24) to mute the audio output. Press MUTE again to restore the audio output to the previous level. Mode Press the MODE button (4) to select a different mode of operation, as indicated on the display panel. Available modes include the following: Tuner (AM/ FM) > SXM (SiriusXM) > iPod/ USB > CD > Auxiliary > BT Audio. Tuner is the default source when a prior source is no longer available.
JHD36A rotary encoder (1) to adjust the Fader between the rear and front speakers from “Rear 12” to “Front 12”. System Menu 1. 2. 3. 4. Press and hold the PTY/CAT/MENU button (2) for more than 2 seconds to enter the system menu. The first menu item, “Key Beep”, will appear on the display. Press the TUNE/SEEK |<< / >>| (18, 19) button repeatedly to navigate the system menu. Press the INFO/ENTER button (16) to select the desired item.
JHD36A Liquid Crystal Display (LCD) The current frequency and activated functions are shown on the LCD panel (21). NOTE: LCD panels may take longer to respond when subjected to cold temperatures for an extended period of time. In addition, the visibility of the characters on the LCD may decrease slightly. The LCD display will return to normal when the temperature increases to a normal range. Setting the Clock To set the clock to display the current time, turn the vehicle ignition on and turn the radio on.
JHD36A TUNER OPERATION Automatically Store/ Preset Scan (AS/PS) Automatically Store Select an AM or FM band. Press and hold the AS/PS button (14) for more than 2 seconds to automatically select 18 strong stations (12 for AM). “Storing Presets” will appear on the screen and the new stations will replace any stations previously stored. Preset Scan Select a band. Press AS/PS (14) to scan preset stations stored in the current band. The unit will pause for 5 seconds at each preset station.
JHD36A Weather Band Operation surrounding conditions, weather, obstructions of the signal by hills or mountains, etc. NOAA Weather Alert What is the NOAA Weather Radio/ Weatheradio Canada? The Weather Alert function adds an additional level of user safety by automatically switching from any of the available function modes to weather band for a minimum of 60 seconds if a NOAA warning tone (1050 Hz) is received/ detected.
JHD36A CD/ MP3/ USB OPERATION Play/ Pause Disc Playback Press the MUTE/>|| button (22) to pause playback. “Pause” is displayed on the screen. Press the MUTE/>|| button again to resume play. Previewing Tracks Press the 2/INT button (6) to play the first 10 seconds of each track in the current folder sequentially. Press 2/INT again to stop Intro Scan and resume normal playback at the current track. Repeat Play Press the 1/RPT button (8) during disc playback to repeat the current track.
JHD36A SIRIUSXMTM RADIO OPERATION 4. Press the INFO/ENTER button (16) to select the desired channel. Channel Up/ Down Tuning About SiriusXM Press the TUNE/SEEK|<< or >>| buttons to search for a channel. Press and hold the TUNE/SEEK|<< or >>| buttons to fast search. Sirius, XM and all related marks and logos are trademarks of Sirius XM Radio Inc. and its subsidiaries. Visit www.siriusxm.com/xmlineup for updates. All programming/ channel lineup/ XM service subject to change or preemption.
JHD36A Satellite Signal Strength Reset SiriusXM Channel Lock Code The display will indicate satellite reception strength as shown below. If you forget your Parental Control lock code, use the following directions to reset the code to the default “0000”. Resetting the lock code will not affect the locked channels list. 1. In SiriusXM mode, tune to Channel 0 2. Set volume to 0. 3. Press and hold the rotary encoder (1) to power off the unit. 4.
JHD36A Advisory Messages Reported by the SiriusXM Vehicle Tuner On-Screen Display Check Antenna Advisory Message Check Antenna Cause Explanation/ Solution The radio has detected a fault with the SiriusXM antenna. The antenna cable is either disconnected or damaged. Check Tuner Check Tuner The radio is having difficulty communicating with the SiriusXM Connect Vehicle Tuner. The tuner may be disconnected or damaged.
JHD36A On-Screen Display Advisory Message Cause Explanation/ Solution Chan Locked Channel Locked The channel that you have requested is Locked by the radio Parental Control feature. See the section on Parental Control, page 14 for more information on the Parental Control feature and how to access locked channels. Enter Code: _ _ _ _ Enter Lock Code User prompted to enter the lock/ unlock code.
JHD36A IPOD® OPERATION Turning the iPod On/ Off The iPod power turns on automatically when it is connected to the front panel USB port, as long as the vehicle ignition is turned on. You can turn the iPod off by disconnecting it or by turning the ignition off. When the ignition is off, the iPod will pause and then enter sleep mode after 2 minutes. While the iPod is connected, the power cannot be turned on or off from the iPod itself. NOTE: The iPod will continuously recharge while in iPod playback mode.
JHD36A BLUETOOTH OPERATION The JHD36A includes built-in Bluetooth technology that allows you to wirelessly connect this head unit to Bluetooth devices for streaming audio playback Use TUNE/SEEK|<< or >>| to Navigate the List About Bluetooth Technology BT Device Bluetooth is a short-range wireless radio technology. Operating in the 2.4 GHz frequency range, it transmits voice and data at speeds up to 2.1 Mbit/s over a range of up to 10 meters.
JHD36A Bluetooth Audio (A2DP) APP OPERATION The A2DP music is available for Bluetooth enabled phones when the phone is connected. To access Bluetooth mode and play songs stored on your phone, press the MODE button (4). While in BT mode, the BT AUDIO icon ( ) will illuminates on the LCD. Selecting Tracks During playback, press the TUNE/SEEK|<< or >>| (18, 19) buttons to play the previous or next track. Pausing Playback During playback, press the MUTE/>|| button (24) to pause the BT AUDIO player.
JHD36A CARE AND MAINTENANCE TROUBLESHOOTING Keep the product dry. If it does get wet, wipe it dry immediately. Liquids might contain minerals that can corrode the electronic circuits. Keep the product away from dust and dirt, which can cause premature wear of parts. Handle the product gently and carefully. Dropping the unit can damage circuit boards and cases, which may cause the product to work improperly. Wipe the product with a dampened cloth occasionally to keep it looking new.
JHD36A SPECIFICATIONS FCC Notes USB Signal to Noise Ratio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . > 65 dB Channel Separation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . More than 50 dB Frequency Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Hz - 20 kHz FM Radio Frequency Coverage (USA) . . . . . . . . . . . . . . . . . . .
ASA Electronics Corporation www.asaelectronics.com www.jensenheavyduty.com ©2016 ASA Electronics Corporation v.
