JCV2015BT AM/FM/RBDS/WB/CD/USB/AUX-IN/BT/iPod Ready/CAN-BUS/SiriusXM Ready Heavy Duty Radio Installation and Operation Manual
JCV2015BT CONTENTS Copyrights and Trademarks Sirius, XM and all related marks and logos are trademarks of Sirius XM Radio Inc. and its subsidiaries. Visit www.siriusxm.com/xmlineup for updates. All programming/channel lineup/ XM service subject to change or preemption. All other marks and logos are the property of their respective owners. All rights reserved. Introduction...............................................................................................................................
JCV2015BT INTRODUCTION Content List System Features Features of Jensen JCV2015BT mobile audio system include: Full Dot Matrix LCD AM/FM US/EURO Tuner with 30 Presets (12AM, 18FM) RBDS (Radio Broadcast Data Service) with PTY Search Sirius XM Radio Ready Single In-Dash CD Player with MP3/WMA Playback Capability USB Playback of MP3 and WMA files iPod Ready (USB Interface) Weatherband Tuner with SAME Technology Mute Bluetooth (Supports A2DP, AVRCP and HFP) Hands Free Protocol fe
JCV2015BT SAFETY INFORMATION Compatible Disc Types When Driving Table 1: General Disc Information Keep the volume level low enough to be aware of the road and traffic conditions. Disc Type When Washing Your Vehicle Do not expose the product to water or excessive moisture. Moisture can cause electrical shorts, fire or other damage.
JCV2015BT INSTALLATION DIN Front Mount This unit is designed for installation in vehicle cabs with an existing 1-DIN radio opening. In many cases, a special installation kit will be required to mount the radio to the dashboard. See the dealer where the radio was purchased for kit availability. Always check the kit application before purchasing to make sure the kit works with your vehicle. 1. Before you Begin 1. 2. 3. 4.
JCV2015BT 9. provide cavity for rear support. In these applications, place the rubber bushing over the screw stud and insert. CAUTION: The perforated rear support strap or rear rubber mounting bushing must be used in the installation of the radio. Installation without either may result in damage to the radio or the mounting surface and void the manufacturer’s warranty. Test radio operation by referring to the operating instructions for the unit.
JCV2015BT WIRING DETAIL A SHOWN FROM PIN VIEW PIN DESCRIPTION PIN DESCRIPTION PIN DESCRIPTION A1 CAN-HI B13 FRONT LEFT + SPEAKER C25 AUX 1 COMM A2 CAN-LO B14 FRONT LEFT - SPEAKER C26 RIGHT AUX INPUT1 A3 PARK LIGHTS B15 REAR LEFT + SPEAKER C27 AUX 1 ON/OFF A4 B16 REAR LEFT - SPEAKER C28 POWER GROUND A5 +12V IGNITION PWR ANTENNA / REMOTE AMP C17 POWER GROUND C29 NO CONNECTION A6 DIM (ANALOG-PWM) C18 AMP REMOTE LINE C30 POWER GROUND A7 +12V BATT C19 RESERVED C31
JCV2015BT BASIC OPERATION Mute Press the MUTE button (24) to mute the audio output. Press MUTE again to restore the audio output to the previous level. Mode Press the MODE button (4) to select a different mode of operation, as indicated on the display panel. Available modes include the following: Tuner (AM/FM) > SXM (SiriusXM) > iPod/USB > CD > Auxiliary > BT Audio. Tuner is the default source when a prior source is no longer available.
JCV2015BT Use the rotary encoder (1) to adjust the Balance between the left and right speakers from “Left 12” to “Right 12”. Fader Adjusting Fade controls the relative level between the front and rear speaker pairs. Use the rotary encoder (1) to adjust the Fader between the rear and front speakers from “Rear 12” to “Front 12”. System Menu 1. Press and hold the PTY/CAT/MENU button (2) for more than 2 seconds to enter the system menu. The first menu item, “Key Beep”, will appear on the display. 2.
JCV2015BT Auxiliary Input To access an auxiliary device: 1. Connect the audio player to either the AUX IN on the front panel (13) or at the rear of the unit with the Low Level Aux leads. a. Connecting to the front panel (13) will automatically trigger and switch to Front Auxiliary b. Connecting to the rear panel requires a trigger on Aux 1 On/Off wire or manually selecting Rear Auxiliary 2.
JCV2015BT TUNER OPERATION Automatically Store / Preset Scan (AS/PS) Automatically Store Select an AM or FM band. Press and hold the AS/PS button (14) for more than 2 seconds to automatically select 18 strong stations (12 for AM). “Storing Presets” appears on the screen and the new stations replace any stations already stored. Preset Scan Select a band. Press AS/PS (14) to scan stations stored in the current band. The unit will pause for 5 seconds at each preset station.
JCV2015BT Weather Band Operation surrounding conditions, weather, obstructions of the signal by hills or mountains, etc. NOAA Weather Alert What is the NOAA Weather Radio/Weatheradio Canada? The Weather Alert function adds an additional level of user safety by automatically switching from any of the available function modes to weather band for a minimum of 60 seconds if a NOAA warning tone (1050 Hz) is received/detected.
JCV2015BT CD/MP3/USB PLAYBACK Press the MUTE/>|| button again to resume play. Previewing Tracks Press the 2/INT button (6) to play the first 10 seconds of each track in the current folder sequentially. Press 2/INT again to stop Intro Scan and resume normal play at the current track. Repeat Play Press the 1/RPT button (8) during disc play to repeat the current track. Press 1/RPT again to stop repeat play.
JCV2015BT SATELLITE RADIO OPERATION Channel Up/Down Tuning Press the TUNE/SEEK |<< / >>| buttons (18, 19) to search for a channel. Press and hold the TUNE/SEEK buttons to fast search. Direct Tuning Mode 1. 2. 3. 4. 5. 6. 7. About SiriusXM Storing Preset Channels Only SiriusXM brings you more of what you love to listen to, all in one place. Get over 140 channels, including commercial-free music plus the best sports, news, talk, comedy and entertainment. Welcome to the world of satellite radio.
JCV2015BT Satellite Signal Strength Reset SiriusXM Channel Lock Code The display will indicate satellite reception strength as shown below. If you forget your Parental Control lock code, use the following directions to reset the code to the default “0000”. Resetting the lock code will not affect the locked channels list. 1. In SiriusXM mode, tune to Channel 0 2. Set volume to 0. 3. Press and hold the volume knob to power off the unit. 4.
JCV2015BT Advisory Messages Reported by the SiriusXM Vehicle Tuner Table 3: SiriusXM Advisory Messages On-Screen Display Check Antenna Advisory Message Check Antenna Cause Explanation/Solution The radio has detected a fault with the SiriusXM antenna. The antenna cable is either disconnected or damaged. Check Tuner Check Tuner The radio is having difficulty communicating with the SiriusXM Connect Vehicle Tuner. The tuner may be disconnected or damaged.
JCV2015BT iPod® OPERATION long as the vehicle ignition is turned on. You can turn the iPod off by disconnecting it or by turning the ignition off. When the ignition is turned off, the iPod will pause and then enter sleep mode after 2 minutes. While the iPod is connected, the power cannot be turned on or off from the iPod itself. This unit is equipped with an iPod® ready function that will allow you to control your iPod (if compatible) using the control panel buttons.
JCV2015BT BLUETOOTH OPERATION BT Device The JCV2015BT includes built-in Bluetooth technology that allows you to connect this head unit to Bluetooth-enabled devices for streaming audio playback. Press Enter Use SEEK +/- to Navigate the List Device 1 Device 2 Device 3 Device 4 Device 5 About Bluetooth Technology Bluetooth wireless technology is a short-range wireless radio protocol. Operating in the 2.4 GHz range, it transmits audio and data at speeds up to 2.1 Mbit/s over a range of up to 10 meters.
JCV2015BT CAN/BUS FEATURES Selecting Tracks During playback, press the SEEK/TUNE button (18, 19) to play the previous or next track. The JCV2015BT is able to communicate with this system to allow you to use other electronic devices in conjunction with your radio. This includes devices such as OEM Steering Wheel Control (SWC) functions or Rear Sleeper Accessory (RSA) audio controller. Pausing Playback During playback, press the MUTE/>|| button (24) to pause the Bluetooth audio playback.
JCV2015BT CARE AND MAINTENANCE TROUBLESHOOTING Keep the product dry. If it does get wet, wipe it dry immediately. Liquids might contain minerals that can corrode the electronic circuits. Keep the product away from dust and dirt, which can cause premature wear of parts. Handle the product gently and carefully. Dropping it can damage circuit boards and cases, and can cause the product to work improperly. Wipe the product with a dampened cloth occasionally to keep it looking new.
JCV2015BT SPECIFICATIONS FCC Notes CD Signal to Noise Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ≥ 65 dB Channel Separation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . More than 50 dB Frequency Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Hz - 20 kHz FM Radio Frequency Coverage (USA) . . . . . . . . . . . . . . . .
ASA Electronics Corporation www.asaelectronics.com www.jensenheavyduty.com ©2015 ASA Electronics Corporation v.