iMON & Multi-Median Users Guide (Draft) z SoundGraph, I nc.
Table of Contents In your Package 4 1. iMON 2.4G LT 4 2. iMON 2.4G DT 4 S/W, H/W Installation and Remote Controller 5 1. Installation Process 5 1) S/W Installation 5 2) H/W (RF Receiver) Installation 5 3) Execute iMON Manager 7 2. Button Layout and its Feature of iMON Remote Controller 1) iMON 2.4G Remote Controller Multi-Median Users Guide 8 8 18 1.
iMON Users Guide 29 1. Using Application Launcher 29 2. Using Task Switcher 29 3. Application Control 30 4. Using All Time Control Mode 30 5. Using Monitor Resolution Changer 31 6. Using Timer 31 7. Using Virtual Kyboard 32 8. Register New Remote Controller 33 9. Setting Program Command 33 10. Setting Windows Command 34 11. Setting Customized Windows Command 34 12. Setting Macro 35 13. Setting Option 35 Update of iMON & Multi-Median 37 SoundGraph, Inc.
This device complies with Part15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operations. I NFORMATI ON TO THE USER This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
I n your Package iMON product lineup is divided into four different models according to the RF remote controller and RF receiver. Each product is composed as like follow s. Please check the components on the below in your box. 1. iMON 2.4G LT In the Box : 1 iMON 2.4G Remote Controller, 1 iMON 2.4G LT (External RF Receiver), 1 Installation CD (iMON Manager, Multi-Median), 2 AAA Batteries, 1 Users Guide Specification of Remote controller Operation range : 30m Battery : 1.
cable, 1 Users Guide Specification of Remote controller Operation range : 30m Battery : 1.5V AAA type Specification of I xternal Receiver OS : Windows 98, 98 Se, Me Windows 2000, Windows XP System Recommendation : Pentium III or higher, 256 Mb of higher Mounted on PCI port USB 1.1 compatibility z S/ W, H/ W I nstallation and Remote Controller Please read this users guide before the installation of your iMON Station ( I R Receiver) . 1.
Insert iMON&Multi-Median Installation CD to your CD ROM, and install the iMON Manager and Multi-Median according to the auto running S/W installation process. 2) H/ W ( RF Receiver) I nstallation ① External iMON 2.4G LT Installation Connect your External iMON Station to your USB port, then assign the H/W driver according to the ‘Found New H/W Wizard’. Assign the CD ROM drive for searching H/W driver. ② Internal iMON 2.4G DT Installation Internal iMON 2.4G DT can be loaded to the 3.5” floppy drive bay.
Internal iMON 2,4G DT is connected to mainboard with two cables, PC case with one cable, Power Supply with one another cable. You should be careful to connect these four cables refer to your mainboard manual. The connectors that each cable needs to be connected are as like follows.
1. Stand-By Power Connection Cable A1 : (2pin, iMON Inside ‘ST PWR1’ A2 : (2pin, Mainboard power extension cable) connector) 2. Mainboard Power Switch Connection Cable B1 : (2pin, iMON Inside ‘M/ B PWR’ B2 : (2pin, Mainboard power switch connector) connector) 3. PC Case Power Switch Connection Cable C1 : (2pin, iMON Inside ‘PWR S/ W’ C2 : (2pin, PC Case power switch connector) connector) 4.
2. Button Layout and its Feature of iMON Remote Controller 1) iMON 2.4G Remote Controller iMON 2.4G remote controller is designed in order to use every functions of Multi-Median. The detail features of each button are as like follows. Power : This button is used to turn on or turn off the PC. You need to push this button more than 2 seconds in order to turn off the PC. The Pow er ON feature is supported on the internal type iMON Station model, iMON I nside, iMON I nside PLUS only. App.
Please refer to the Multi-Median Users Guide in order to learn about the button usage on the Multi-Median. Windows : This button brings the start menu and acts like the [Windows logo] key of the keyboard. Menu : This button brings the menu and acts like the [menu] key of the keyboard. App. Launcher : This button runs the Application Launcher which could execute many assigned windows applications. Task Switcher : This button is used for choosing the application among the current running applications.
Up, Down, Left, Right : These buttons are used as same like four way arrow keys of the keyboard. Enter : This button is used as same like [Enter] key of the keyboard. All Time Control Mode : This button used for the ‘All Time Control Mode’ of the iMON Manager. Please refer to the iMON Users Guide for the details of the ‘All Time Control Mode’. Eject : This button is used to open and close the CD/DVD ROM. VOL - : This button is used to reduce the PC system volume.
Prev : This button is used to generate ‘Previous’ command in the various media applications and also worked as ‘Channel Up’ on the TV related applications. Next : This button is used to generate ‘Next’ command in the various media applications and also worked as ‘Channel Down’ on the TV related applications.. Rew : This button is used to generate ‘Rewind’ command in the various media applications F.Fwd : This button is used to generate ‘Fast Foward’ command in the various media applications.
Aspect Ratio : This button is used to generate ‘Change the Aspect Ratio’ command in the various media applications. Menu : This button is used to generate ‘DVD Menu’ command in the DVD applications. Caption : This button is used to generate ‘Change the Caption/Subtitle’ command in the DVD applications. Language : This button is used to generate ‘Change the Language/Audio’ command in the DVD applications.
Power : This button is used to turn on or turn off the PC. You need to push this button more than 2 seconds in order to turn off the PC. The Pow er ON feature is supported on the internal type iMON Station model, iMON I nside, iMON I nside PLUS only. App. Exit : This button generates the keyboard short cut, [ALT]+[F4], which is used for closing the active window. Screen Saver : This button runs the screen saver instantly. Timer : This button runs the timer setup screen of the iMON manager.
Max/Res : This button toggles ‘maximize/restore’ the active window. ESC : This button is used as same like [ESC] key of the keyboard. Windows : This button brings the start menu and acts like the [Windows logo] key of the keyboard. Menu : This button brings the menu and acts like the [menu] key of the keyboard. App. Launcher : This button runs the Application Launcher which could execute many assigned windows applications.
Shift+Tab : This button is used as same like [Shift]+[TAB] key of the keyboard. Tab : This button is used as same like [TAB] key of the keyboard. Mouse/Keyboard : This button is used to toggle the ‘Joystick’ operation mode of iMON RSC. This button could toggles the mode of the Joystick between Mouse mode and Keyboard mode. The following two states show the each mode, mouse and keyboard. The mouse icon in the iMON Indicator on the screen means that you could use Joystick as a mouse.
Joystick knob like a button. MUTE : This button is used to mute the PC system volume. VOL - : This button is used to reduce the PC system volume. VOL + : This button is used to increase the PC system volume. Play : This button is used to generate ‘Play’ command in the various media applications. Pause : This button is used to generate ‘Pause’ command in the various media applications. Open : This button is used to generate ‘File/Folder Open’ command in the various media applications.
Stop : This button is used to generate ‘Stop’ command in the various media applications. Rew : This button is used to generate ‘Rewind’ command in the various media applications F.Fwd : This button is used to generate ‘Fast Foward’ command in the various media applications. Full Screen : This button is used to generate ‘Full Screen’ command in the various media applications.
Multi-Median Users Guide Multi-Median is designed to enjoy the media files like Music, Movie, Photo and use the multimedia device like DVD, TV, Digital Camcoder and Digital Camera using only remote controller. It is easier and more convenient to read this Users Guide before using the MultiMedian. 1. Screen Layout of Multi-Median 1) Main View Run the Multi-Median using the ‘Multi-Median’ button of the iMON MM or iMON RSC remote controller, you could see the main view of Multi-Median as like below picture.
● Digital Camcoder : Multi-Median supports the DV Digital Camcoder which is connected through the IEEE1394 port of PC. You could control your camcoder using the iMON remote controller and record the video clips of the camcoder. Recording feature w ould be upgraded on the next update version. ● Setting : You could customize the Multi-Median through setting menu. Please refer to the ‘Setting Environment’ for detail description. ● Exit : You can go back to Windows.
3) Media Folder View If you choose the type of media like ‘My Music’, ‘My Movie’, ‘My Photo’, the media folder view will be appeared. In the case of ‘My Movie’ and ‘My Photo’, you could see the folders that contain the media files, you can group this folder view as folder. IN the case of ‘My Music’, you can assign ‘Artist’, ‘Genre’ and ‘Album’ as a media group. The below icons show the status of the media folder.
If you enter to the ‘Media File View’ from ‘Media Folder View’, you may see the following screen. There is a difference in the ‘My Music View’ and the other views as like follows. You can enter to the ‘Media Preview’ from ‘Media File View’ after selecting the media file that you want. 5) Media Preview Media Preview shows the information of the current playing media file.
6) Full Screen View Full Screen View shows the current playing media file on the full screen. If you want to see the detail information about the current playing media file, you may go back to the media preview or call the control panel using the ‘0, panel’ button on the remote controller. 7) DVD View DVD View is similar to the Movie View. You can configure the DVD setting in the DVD menu screen, then see the DVD movie on the full screen, just push the ‘Enter’ button on the remote controller.
and ‘Rec’ button of the remote controller. The recording feature of Digital Camcoder w ould be supported on the future update. 2. Using Remote Controller on the Multi-Median Multi-Median could be controlled by iMON MM or iMON RSC remote controller. Especially, iMON MM supports the special features of Multi-Median, so you can have more control power on Multi-Median using iMON MM remote controller. Please refer to the remote controller button usage on the below.
the TV view. 9) Rew button ‘Rew’ button is used to make ‘rewind’ command. 10) F.FWD button ‘F.FWD’ button is used to make ‘fast forward’ command. 11) Stop button ‘Stop’ button is used to make ‘stop’ command. 12) Open button ‘Open’ button is used to make ‘open’ command for the CD/DVD Rom. 13) REC button ‘REC’ button is used to make ‘record’ command at TV and Digital Camcoder view. You can choose the Codec for recording and other recording properties through the setting.
22) Number 2 button ( My Movie) ‘Number 2’ button changes the current media to My Movie. 23) Number 3 button ( My Photo) ‘Number 3’ button changes the current media to My Photo. 24) Number 4 button ( My DVD) ‘Number 4’ button changes the current media to My DVD. 25) Number 5 button ( My Home) ‘Number 5’ button stops the current media and go back to the Main View. 26) Number 6 button ( My TV) ‘Number 6’ button changes the current media to My TV.
4. Setting Environment Multi-Median is designed to change the settings using just remote controller. Please refer to the followings in order to learn more about the various settings of Multi-Median. 1) Back The ‘Back’ menu on the list is used to go back to the previous step of the current setting.
and ‘Hue’ setting. You can also change the ‘Aspect Ratio’, Size, Position, Sync, Font, Color, Bold, Outline and Shadow properties of the subtitle. Finally, you can remove the bookmark position that you made and change the repeat and shuffle settings. 5) Photo You can set many properties of the Photo View. You could change the background image of the Movie view like the other media view.
-30-
iMON Users Guide 1. Using Application Launcher Let’s start Application Launcher. While iMON Manger is running, press the remote controller button that is assigned for ‘Run Application Launcher’ in Windows Command. The ‘Application Launcher’ will start as shown in the below picture.
activate and press Enter key. 3. Application Control Now, once you have activated the program that you want using ‘Application Launcher’ and ‘Task Switcher’, you can use your registered remote controller button to control the program. For example, if you want to control WinAmp, activate WinAmp and send the signal of the remote controller. You can easily use the functions of WinAmp such as Play/Pause/Stop/Next/Previous/Volume Control.
● All Time Control Mode ON : Use the application shown in the iMON icon as a ‘All Time Control’ mode. You can use the Winamp as ‘All Time Control’ mode in the above picture. If the Winamp automatically starts, if it does not running before. ● All Time Control Mode OFF : The ‘OFF’ button makes disable the ‘All-Time Control Mode’. ● All Time Control Mode SELECT : Choose the application that you want to control as a ‘All Time Control Mode’ 5.
the relative time to the current time. You can also use arrow keys to set the time. To register the timer, press the timer button on the remote controller and use up/down arrow button to select MODE/TIME/Hour/Minute, or use Left/Right arrow button to adjust the value of each item. Then, press the timer button again. The remote input signal indicator changes as shown below in order to indicate the time that the ‘SLEEP/ALARM’ function will start.
You may input the characters like above picture, and then return the input characters to the application using ‘Enter’ button on the highlighted text input window. 8. Register New Remote Controller If you push the ‘ADD’ button on the iMON Manager, you may see the ‘Adding New Remote Controller’ window. If you use the iMON remote controller like iMON MM or iMON RSC, please use the remote controller name as ‘iMON MM’ and ‘iMON RSC’ only.
will be displayed to notice the IR signal assignment. 6) Confirmation If you finished the remote controller registration, please close the setup window, and confirm the remote control action on the selected application. Since iMON Manager compares the button signal from the remote controller w ith the currently active application command list to execute the corresponding function of the application. So you can share the same remote controller button among different applications.
prepared to the ‘Windows Command’ setting. The setting of ‘Customized Windows Command’ is similar to that of ‘Windows Command’. 12. Setting Macro There is a restriction that you cannot register the keyboard shortcut which is composed of more than four keyboard keys combination. Normally, most of windows keyboard shortcut is composed of less than three keys. But if you want to log in to the website, you need a ID and password, in this case, you can use the Macro function of iMON usefully.
states of iMON indicator that shows you the several informations. Normal iMON Indicator Registered IR Signal is detected Not Registered IR Signal is detected Shows the System Volume Shows the System Volume Mute Shows the usage of iMON RSC Joystick as a Mouse Shows the usage of iMON RSC Joystick as a Keyboard 3) Adding Sound Effect This option is the function that let you know the IR signal reception from the iMON Station. You can set the sound or turn off the sound of IR signal reception.
You can change the repeat delay and repeat time of the keyboard. This setting is useful when you use the remote controller to control the volume. 6) Timer You can change the sound of alarm and the duration of the alarm sound. 7) Monitor Resolution You can select the resolution that will displayed on the ‘Monitor Resolution Changer’ window. 8) Virtual Keyboard You can assign the word that you will use the URL set of iMON virtual keyboard.
SoundGraph, I nc. Address SoundGraph, 621-1, YeokSam 1-Dong, GangNam-Gu, Seoul, Korea Telephone 02-569-2097~8 Fax 02-569-2090 Web Site http://iMON.soundgraph.com http://www.soundgraph.com For any inquiry, send us an e-mail to the following address. iMON Development Team: iMON@soundgraph.com 1. It is strictly prohibited to copy or publish this user’s manual online without consent of SoundGraph Co., Ltd. 2.
