font] Radio Key® RK-WM Proximity Reader is designed to integrate into any system requiring an input in the Gandhian format. The reader will read any Secure Key proximity card or key tag and transmit the data in the Gandhian Format designated by the card or key tag. Security's exclusive DYNASCAN™technology® assures maximum performance in any environment. This completely potted unit is rated for extreme weather use and is vandal resistant. Installation of the Radio Key® RK-WM is easy.
RADIO KEY. RK-WM SPECIFICATIONS Alt dimensions in drawings are indicted in inches. -»lakeside 1,60 pi T fe 1.26» jesting Label Proximity Reader Key Tag Insert Model RK-WM Model TURK-02 PHYSICAL Proximity Reader Key Tag Depth 0.50" (1.27 cm) 0.20" {0.50 cm) Width 1.60" (4.06 cm) 1.268" (3.20 em) Height 3.50" (8.88 cm) 2.00" {5.00 cm) Weight 2.88 gm) 0.25 02.47.
RADIO KEY® RK-WM Installation Instructions INSTALLATION STEPS: Drill holes as needed per installation template shown above. Feed cable through 1/2” hole. Attach reader to any flat surface with two #6 round head screws. Snap label insert into front of reader to cover Screws. Connect cable to contort panel per wiring diagram shown below. 1{2° Diameter through hole for cable.
INSTRUCTION TO THE USER This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.