User Manual Soundcore Rave Mini Safety Instructions ① Avoid dropping. ② Do not disassemble. ③Avoid extreme temperatures. ④ Do not use the device outdoors during thunderstorms. ⑤ Use original or certified cables and adapter. ⑥ Do not use any corrosive cleaner / oil to clean.
At a Glance ① Power Button / Power Indicator ② Bluetooth Button / Bluetooth Indicator ③ Source Input Button / Source Input Indicator ④ Next Track Button ⑤ Previous Track Button ⑥ Multi-function Button ⑦ Volume + Button ⑧ Volume - Button
9. Light Effects Button / Light Effects Indicator 10. Bass Up Button / Bass Up Indicator 11. DC Power Input 12. USB Port 13. AUX IN Port Using Your Soundcore Rave Mini 1. Turn On / Off ON Press OFF Press and hold for more than 1 second a.
Note: Soundcore Rave Mini can pair up to 2 mobile devices via Bluetooth(Dual Bluetooth Connection). Soundcore Rave Mini can only play the music on one mobile device at a time.
With True Wireless Stereo technology, you can pair your Soundcore Rave Mini with another Soundcore Rave Mini to explore the best sound effects with left and right sound channels separated on both speakers. Play / Pause Play Next Song Play Previous Song Press to turn Bass Up on and off Press and hold for 2 seconds to switch between Indoor / Outdoor equalizer modes. Activate Siri / Other Voice Control Software Volume Up / Down Check available Light Effects modes on Soundcore App.
When turned on, Soundcore Rave Mini will automatically connect to the last connected device if available. If not, press the Bluetooth pairing button to activate pairing mode. To pair a different device, press the Bluetooth button to re-enter pairing mode. Then repeat the pairing steps. Having connection problems? Remove Soundcore Rave Mini from your device’s Bluetooth history and ensure it’s less than 3 feet away. Then try pairing again.
USB mode Solid White(Source input indicator) *SoundLine AUX cable sold separately. When using AUX mode, control audio playback via the connected device. 3.
Battery level <10% Battery level <25% Battery level 25%~55% Battery level 51%~75% Battery level 75%~100% Charging Slow Flashing White(Power indicator) Use the included DC power cable to charge your Soundcore Rave Mini and make sure it is fully charged before its first use. Disconnect your speaker from the charger when fully charged. Do not charge your speaker for extended periods. 4.
Press to turn Light Effects On / Off Note: Flash can be turned off in Soundcore app individually. 5. Soundcore App Download the Soundcore app for an enhanced product experience. Follow onscreen instructions to set up Soundcore app. When not in use, store your speaker in a cool place. Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.
Maximum output power: 6dBm Frequency band: 2.4G band (2.4000GHz-2.4835GHz) Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong Specifications *Specifications are subject to change without notice. . Input 100V-240V AC, 50~60Hz Charge out 5V⎓ 2A Audio output 80W Battery capacity 4900 mAh Charging time 4.0 hours Playtime (varies by volume level and music content) 18 hours Size 180 x 180 x 369 mm Weight (without packaging) 3.5 kg / 123.
Bluetooth range Product Number A3390 Bluetooth Speaker / Soundcore Rave Mini 20 m / 66 ft
- English: " This device complies with Industry Canada licence-exempt RSS standard( s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device." - French:" Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.