Soundcore Life U2 Quick Start Guide
Charging • Fully dry off the USB port before charging. • To prevent damage, use the provided USB-C cable. LED indicator Steady red Steady blue Flashing red Being charged Fully charged Low battery Powering On/Off Press and hold the multi-function button for 1 second to power on. Press and hold the multi-function button for 3 seconds to power off.
Bluetooth Pairing When powered on, find “Soundcore Life U2” in the Bluetooth list on your device and connect. When powered off, press and hold the multi-function button for 3 seconds until the LED flashes blue to enter the Bluetooth pairing mode.
• Soundcore Life U2 can only play music on one mobile device at a time. • Each time you power your Soundcore Life U2, it will automatically connect to your last successfully connected device if available.
1 2 Reset 1. Make sure the headphone is powered off and being charged. 2. Press and hold the multi-function button and volume up button simultaneously for 5 seconds until the LED indicator flashes red twice. All the memory data will be cleared. Specifications Specifications are subject to change without notice. Input 5V 0.