User's Manual
Quick Install Instruction
Before you start...
• Read the instructions.
• Do not install this system in close proximity to water or re.
• Do not expose these products to very hot environments or heat
sources.
• Use only the original parts and accessories provided by Soundcast
Systems.
• Avoid spilling liquids on any of the components of the system.
• Clean using only a dry cloth.
• This equipment is designed and intended for indoor use only.
• To avoid a tripping hazard, do not place wires in exposed walkways.
• Connect wires by inserting the stripped leads completely inside
the spring terminals. Make sure there is no excess stripped wire
outside of the spring terminal. Excess stripped wires left outside
of spring terminals may cause a short circuit and prevent the unit
from functioning properly.
• Connect the SCT101 Transmitter (black front and grey enclosure)
to the audio source with supplied input wires. Using speaker wire,
connect the SCR102 Receiver (black front and enclosure) to your
speakers.
NOTE: This product uses a radio technology that is not
compatible with other Soundcast Products. It is designed for
the express purpose of in-room surround sound applications.
CAUTION! Do not connect the SCR102 Receiver to the audio
source. This will damage the Receiver and/or the audio source.
2 Safety information
+
Specifications
1 SCT101 Transmitter
(Black front, grey enclosure)
1 SCR102 Receiver
(Black front and enclosure)
1 SY-0630 115VAC / 6VDC
Power Adapter for Transmitter
1 GPE603- 100 – 240VAC / 24VDC
Power Adapter for Receiver, AC clip
1 Power Cord for GPE603
Power Adapter
2 Transmitter Input Wires
(black / black - white pair)
2 Stands
1 SCS100 SurroundCast Kit Contents
• Compact design
• Works in the 2.4GHz frequency band
• Co-exists with other 2.4GHz devices
• Interference free audio operation
• Designed for in-room transmission range
• Very high quality audio
SCT 101 Transmitter
SCR 102 Receiver
+
-
1
2
3
4
5 6
+
-
7
8
3 Features
Please observe these guidelines to ensure the reliability
and quality of the wireless connection.
1. For best results install both Transmitter and Receiver in a
vertical orientation.
2. If the SurroundCast Receiver is wall mounted, optimum
performance will occur if it is placed so that the orientation
is facing the SurroundCast Transmitter.
3. If the SurroundCast Receiver is mounted in the
mounting stand (included), optimum performance
will occur if it is placed with an orientation facing the Sur-
roundCast Transmitter.
4. It is also recommended to place both SurroundCast units
at least 18 inches away from metallic walls or large metallic
blocking objects to ensure a strong wireless link.
5. Prevent heavy objects from falling on the system and and/or
exposed electrical wiring near SurroundCast components to
avoid the risk of an electric shock.
6. Place SurroundCast components away from other sources
of wireless signals such as routers, music networks or any
other electronic piece of equipment that uses radio commu-
nications including other Soundcast products. A distance of
3 ft. or more between SurroundCast and your other wireless
devices is preferable for optimum performance.
4 Placement
Home Theater Application
Left
Surround
Right
Surround
Subwoofer
Amplifier
Left
Center
Right
5 Setup
Transmitter and Receiver Units –
1 Positive (+) volume calibration control
2 Negative (-) volume calibration control
3 Status indicator
4 DC jack
5 Left speaker input terminals
6 Right speaker input terminals
7 Re-mating switch access
8 Wall mounting holes
Black/Black
Black/Gray
SCT 101 Transmitter
SCR 102 Receiver
CAUTION
CAUTION: Be certain that you are connecting the
SCT101 Transmitter to your Home Theater System.
Connecting the SCR102 Receiver to the Home Theater
System could result in damage to SurroundCast and/or
your Home Theater equipment.
CAUTION
Transmitter
Audio input (speakers) .................. 10 VRMS MAX
Audio output (wireless) ................. 48 kHz, 16-bit stereo
Transmission delay ........................ 20 mS
Power supply ................................ DC 6 V at 0.3 A
Receiver
Audio input (wireless) ................... 48 kHz, 16-bit stereo
Audio output (speakers) ................ 50 W (RMS)
Speakers ....................................... 4 to 8 ohm compatible
Signal-to-noise ratio ..................... 100 dB
Total harmonic distortion ............... < 0.5%
Power supply ................................ DC 24 V at 2.5 A
Power consumption ...................... 60 W
Poster.indd 1 2/26/10 11:09:27 AM