User's Manual

ManualsBrandsSoundBot ManualsHeadphonesSoundBot SB250

SoundBot

Bluetooth Stereo Headphones SB250

User Guide

Thank you for buying the SoundBot SB250 Bluetooth Stereo Headphones from EyeCandis. These

Headphones are designed to be convenient, stylish and provide high quality audio Playback from any

Bluetooth enabled Audio Device or wired only device.

The SoundBot SB250 Bluetooth Stereo headphones can also be used to receive telephone calls

while in use and will automatically pause the audio playback in order to receive the call and when

the call ends audio Playback will resume.

Please read this user Guide thoroughly before use so that you can understand the setup and

functions.

Contents

Please check your SB250 Bluetooth Stereo Headphones package contains the following items

 SB250 Bluetooth Stereo Headphones

 3.5MM Audio Cable

 USB Charging Cable

 User Guide

Product Features

1. Volume Up

2. Volume Down

3. USB Charging connector

4. Audio Cable Connector

5. Microphone location

6. Multi-Function Button and LED Indicator

Summary of content (5 pages)

PAGE 1
SoundBot ® Bluetooth Stereo Headphones SB250 User Guide Thank you for buying the SoundBot SB250 Bluetooth Stereo Headphones from EyeCandis. These Headphones are designed to be convenient, stylish and provide high quality audio Playback from any Bluetooth enabled Audio Device or wired only device.
PAGE 2
7. 8. 9. 10. Skip track forward Skip Track Backwards NFC (Near Field Communication) Pairing position (Optional) Folding Hinges Setup Note: Please fully charge the battery before 1st time use. Turn on the Headphones To turn on the Headphones simply hold the Multifunction Button down for 3 seconds. The LED Indicator will flash BLUE 3 times, and you’ll hear the message “Power On” through the Headphones. To turn off the Headphones simply hold the Multifunction Button down for 3 seconds.
PAGE 3
Note: The audio cable will allow you to listen to music even if the Headphone Battery is out of power. Also allows you to use the Headphones in places where wireless signals are restricted such as Hospitals and Aircraft. Description of Headphone functions Adjust volume Press the volume +/- key to adjust the volume. One short press will adjust one level. When the volume reaches max or minimum volume the Headphones will play a chime.
PAGE 4
If you are listening to music when there is incoming Phone call or you are making a Phone call, the Headphones will automatically switch the connection from the music player to the Phone. The Music will be paused temporarily. After you end the call, the music resumes. Note: when you press Multifunction Button to answer or end a call, please just press one time. Do not press and hold. Make a phone Call with the Headphones Use the Phone’s keypad to dial the phone number. Press Phones “SEND” or “OK” key.
PAGE 5
Press and hold volume + Button for 2 second to redial the last dialed number. Microphone mute In a call mode, press and hold volume - key for 2 seconds until you hear prompt from the Headphones, you can switch to open and close mute function. Switch Phone call between Phone and Headphones In call state press and hold Multifunction Button for 2 seconds until there is prompt from the Headphones. The call will be switched from Headphones to Phone or vice versa.