INSTRUCTIONS CONTENTS Panel Introduction Basic Function Remote Control Operation Turn on/off Access main interface USB/SD Card Operation Radio Operation Disc Operation Play/Eject Disc DVD/VCD Disc Playback CD Disc Playback MP3/WMA Format Disc Playback Touch Menu BT Operation ST.
INSTRUCTIONS INSTRUCTIONS PANEL INTRODUCTION ACCESSORY SD726MB Accessory Quantity Wire 1PC USB Cable 1PC Keys OPEN 1 IR 2 3 VOL.SEL 17 16 2PCS Remote controller 1PC Warranty card 2PCS DVD Parental control function MIC 4 5 USB SD REL 1/ MUTE MODE 15 2/RPT 3/RDM 4/ AUX 14 6/ 5/ SD726MB 6 7 8 9 10 11 13 12 OPEN IR VOL.
INSTRUCTIONS BASIC FUNCTION SPECIFICATIONS Power supply DC 12V Power range 10.8-16.0V DC Max Current Consumption 15A Ground system Negative ground Power Output 85 WattsX4 Channels FM tuner US frequency range 87.5-107.9MHz European frequency range 87.
INSTRUCTIONS WIRING DIAGRAM 11. Number Button 4 / In radio mode, press this button to hear radio preset; In disc playback mode, press this button for to stop playback. 12. Number Button 5 / In playback mode, press the button to adjust the angle of screen.
Touch screen Calibration Remote Control Operation Please follow the below instructions to calibrate when there is no touch or touch is not accurate. REMOTE CONTROL FUNCTION 4. SOURCE Button Press this button to change mode. Step 1: Press the mode button in the unit to switch to DVD mode. Step 2: Insert a DVD disc, after DVD is loaded, press the stop button “ ” as show in picture (1). in the remote short, the unit will display as show in picture (2). 5.
INSTRUCTIONS INSTRUCTIONS 15. 0-10+ Button Press this button to choose desired song、 section、preset stations. Decimal numbers, for example the 19th song, press 10+ and 9 button. 16. AMS / RPT Button In radio mode, press this button to browse stored stations. In audio mode, press this button to play repeatedly. 24. ANGLE Button In DVD mode, press this button to change play angle. 25. SETUP Button In audio mode, press this button to choose different set items. 26.
Access setup interface Turn on/off Click [Setting] icon on main interface to access setup interface. When the ignition switch is put in ACC or ON position, Press power button on the front panel to turn on the unit. After the host starts, hold power button for 3 seconds, the host will turn off.
Radio Operation Other Operation 1. Enter/exit Touch [Radio] icon in the main interface to enter into the radio interface. Touch icon to return to main interface, and then touch other function icons so as to exit radio mode. 2. MUTE on/off Click icon to switch MUTE on and off. 3. Loudness on/off Click icon so as to turn on/off loudness function.
ST. Wheel setting Disc Operation 1. Click on the [ ] icon in the main interface into the SWC. settings interface. 2. The original vehicle to the control line positive, negative with the machine control line in the positive and negative connection. 3. Click the SWC buttons will appear corresponding operating tips, and fundamental operation prompts the SWC feature set. 4. Set function to save the settings and click the Confirm icon to confirm. Note: To modify function settings, repeat procedures 3~4.
INSTRUCTIONS BT Operation Return to root menu Touch this icon, it shall return to root menu of disk in DVD state and access PBC menu playing in VCD state. All chapters in the disk shall be displayed on the interface, touch the chapter icon directly for playing. 1. Enter/exit Touch the icon [ ] in main interface or under Radio/SD/USB/Media/BT Music status to enter BT [ ] main interface; Touch icon to exit BT interface. Access title menu Press this button to return to title menu of the disk.