Specs
®
300 Wengel Drive
Post Office Box 576
Reedsburg, Wisconsin 53959 USA
+1 608.524.0625 main
+1 608.524.0655 fax
Discover more about Sound Devices products at www.sounddevices.com
®
Description
Sound Devices’ USBPre® 2 is high-
resolution, portable hardware interface for
Mac- and Windows-based digital audio.
The USBPre 2 interfaces professional
microphones, line-level sources,
consumer audio electronics, and S/
PDIF digital sources with Mac OS and
Windows computers via USB. Its discrete-
transistor microphone preamps with 24-
bit converters and sampling rates up to
192 kHz provide the highest performance
in a portable interface. Peak limiters,
high-pass filters, and a 15 dB pad add
overload protection. All analog-to-digital
and digital-to-analog conversion is done
outside of the computer, in the USBPre 2,
for superior audio performance.
USBPre 2 is a class-compliant audio
device for plug-and-play connection to
computers running Mac OS, Windows,
USBPre 2 Key Features
• Extended bandwidth, low-noise
microphone preamplifiers with 48 V
phantom, limiters, high-pass filters,
and 15 dB pad.
• Dynamic range greater than 114 dB
(in 24-bit operation).
• Flat 10 Hz to 22 kHz audio
bandwidth with ultra-low distortion
characteristics.
• Each input individually selectable
between microphone, line, and
aux level signals (both channels
selected simultaneously for S/PDIF
connections).
• Precision, 23-segment, multicolor
LED peak/VU meter, selectable
between input and output sources.
• Balanced outputs on XLR connectors
with dedicated level control can be
used to drive
• Mix control enables zero-delay
monitoring of source audio,
computer audio, or a mix of both
source and computer audio for
multitrack recording or computer
telephony.
• Phono (RCA) jacks connect Aux
Output to external loudspeakers or
preamplifiers.
• Bus powering via USB for
convenient, single-cable connection
to the computer.
• In Stand-Alone mode the
USBPre 2 operates as a microphone
preamplifier and analog-to-digital
converter.
• Hardware loop-through for test &
measurement to send computer
audio directly back to an input.
• High-strength extruded aluminum
chassis.
• Mac® OS X 10.4+, Windows®XP/
Vista/7, and Linux, class-compliant
audio device.
• Additional features controlled by
hardware DIP switches on the back
panel; no software-only features and
no control panel.
Description continued on next page
USBPre 2
High-Resolution Two-Channel Computer Audio Interface