User's Manual

ManualsBrandsSound Crush ManualsAudio EquipmentBluetooth Speaker

 BluetoothSpeaker

Model:V9

TradeMark: 

Manufacturer:SoundCrushCompanyLimited

- Read all instructions carefully before use.

- Retain manuals for future reference.

- Refer all servicing to qualified service personnel.

- Servicing is required when the apparatus has been damaged in any way: such as liquid has

been spilled or objects haven fallen into the apparatus, the apparatus has been exposed to

rain or moisture, does not operate normally, or has been dropped. Don't attempt to service

this product yourself. Opening or removing covers may expose you to dangerous voltages or

other hazards.

- Only use attachments/accessories specified by the manufacturer.

- Only use a water-dampened soft-cloth to clean the surface of this product.

- The following will damage this product: extreme heat; cold.

- It is recommended to thoroughly charge electronic devices for the first time overnight.

Subsequent charges can be as needed. During charging, or extended use, the product may

become warm.

- Use proper power sources – Plug the product into a proper power source, as described in

operation instructions or as marked on product.

- Un-authorized attempts to dismantle or repair this product will void product warranty.

- Using this device near other electronic devices may cause interference.

- Do not use this product in electrical storms.

N/A

Summary of content (5 pages)

PAGE 1
Bluetooth Speaker Model: V9 Trade Mark: N/A Manufacturer: Sound Crush Company Limited - - - Read all instructions carefully before use. Retain manuals for future reference. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way: such as liquid has been spilled or objects haven fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
PAGE 2
Whats in the box 1 x V9 Bluetooth speaker 1 x Users manual 1 x Micro USB charge cable 1 x AUX cable 1 x Carry Bag
PAGE 3
Charging the V9 (3.7V rechargeable battery built-in) 1- Turn off V9 before charging 2- Connect V9 with PC/Laptop/Mac or any 5V USB adaptor(not included) with the USB cable included 3- Red LED turns ON during charging, turns OFF after fully charged. 4- Unplug USB cable after fully charged, it costs about 2 hours to fully charge the speaker. 5- Red LED twinkles when low power(<21%), with indication sound.
PAGE 4
3- Pair it with Mac – choose setup Bluetooth Device from the Bluetooth status menu in the menu bar, and follow the onscreen instructions to pair with the speaker. If the Bluetooth status menu is not available, open Bluetooth Preference and select the “Show Bluetooth status in the menu bar” checkbox. As per of the pairing process, you may need to enter a passkey (0000) depending on Bluetooth version of devices. 4- Open System Preferences and click Sound. 5- Click Output and select the Bluetooth speaker.
PAGE 5
TROUBLE SHOTTING / Q & A Q1: If the pairing is not successful? A1: Turn of the speaker and turn on again, then repair again. Q2: The sound is low or completely silent. A2: Make sure the connection (either Bluetooth or AUX) is fully functioning and secure. If you are using the AUX port check the cable is connected properly. Check the speaker and audio device volume and that an audible music track is playing.