Clothing Rack Thank you for your purchase. Please reference assembly i instructions before use. Make sure all parts are present Wo.
@] SORBETS’ Clothing Rack With Drawers Assembly Instructions Thank you for your purchase. Please reference assembly tal item CRT ETT ECR Eo and place them side by side for easy Identification. o Step 6: For this step make sure the frame connector J) doesn't fall into the frame. Carefully place frame connector (J) Into the left frame (B) as shown. Secure with small screw (M) and tighten with hex key (Ia). Repeat with the right frame (C). pore = = with small screw {(M) and tighten with hex key {Ia).
OQ Clothing Rack For your safety, please secure the unit SORBETS' With Drawers to the wall with the following steps LEEWAY EH EY Wal Anchor 1) PCS EY wall Mount Screw Crm Step 1: Drill a hole into the wall using 2 6mm bit and gently PCS insert the wall anchor (A) with the help of a hammer. Step 2: Place the shelf against the wall, and insert the wall mount screws (B). After making sure everything is secure, feel free to use.
@ Clothing Rack 5 Thank you for your purchase. Please reference assembly J Liu tel [Gate RTE ERT I ERE SORBETS Optional Assembly and place them side by side for easy identification. Instructions IBY Wood Sticker | [EY Frame Connector PCS PCS Step 2: To connect two clothing racks together, clip frame connector (B) to the | Step 1: Place wood sticker (A) on top of the wood shelf frames as shown. top as shown.