User Manual

Wireless Stereo Headset

MDR-XB950B1

Switching the sound quality mode

The sound quality is set to the “Priority on sound quality” mode as the default setting.

When using an SBC, AAC, or aptX compatible device, use with the “Priority on sound

quality” mode.

If the connection is unstable, such as when producing only intermittent sound, select the

“Priority on stable connection” mode.

Sound quality and indicator (blue) of each mode

When you switch the sound quality mode, the indicator flashes in blue to show the current

sound quality mode.

“Priority on sound quality” mode: 3 times - - - -

SBC, AAC, or aptX is selected automatically.

“Priority on stable connection” mode: 1 time

SBC

Turn on the headset by pressing the button for more than 2

seconds while holding the + or - button down.

To select “Priority on stable connection,” turn on the headset while holding the -

button down.

To select “Priority on sound quality,” turn on the headset while holding the + button

down.

MDR-XB950B1 | Help Guide | Switching the sound quality mode http://helpguide.sony.net/mdr/xb950b1/v1/en/contents/TP0001176179.html

1 of 2 7/26/2017 10:06 AM

PAGE 1
MDR-XB950B1 | Help Guide | Switching the sound quality mode 1 of 2 http://helpguide.sony.net/mdr/xb950b1/v1/en/contents/TP0001176179.html Wireless Stereo Headset MDR-XB950B1 Switching the sound quality mode The sound quality is set to the “Priority on sound quality” mode as the default setting. When using an SBC, AAC, or aptX compatible device, use with the “Priority on sound quality” mode.
PAGE 2
MDR-XB950B1 | Help Guide | Switching the sound quality mode 2 of 2 http://helpguide.sony.net/mdr/xb950b1/v1/en/contents/TP0001176179.html To check the sound quality mode While the headset is powered on, press and hold the button, then press the + or - button within 2 seconds (before the power is turned off). The indicator will flash in blue 3 times (“Priority on sound quality” mode) or 1 time (“Priority on stable connection” mode).