Support pages Pages d’assistance Páginas de soporte Find information on software updates: Trouvez des informations sur les mises à jour de logiciel : Encuentre información sobre las actualizaciones de software: http://www.sony.
Owner’s Record The model and serial numbers are located on the bottom of the Bar Speaker. Record the serial numbers in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. CAUTION Risk of explosion if the battery is replaced by an incorrect type. Do not expose batteries or appliances with battery-installed to excessive heat, such as sunshine and fire. Indoor use only. Model No. HT-Z9F Serial No.
This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. apparatus combination to avoid injury from tip-over. Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. Properly shielded and grounded cables and connectors must be used for connection to host computers and/or peripherals in order to meet FCC emission limits. CAUTION You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.
Table of Contents What’s in the Box .......................... 7 What You Can Do with the System .....................................8 Guide to Parts and Controls ........ 10 About the Home Menu ................ 16 Connecting to a TV or AV Device Connecting to a TV or AV Device with the HDMI Cable Startup Guide (separate document) Connecting Sony TV with the BLUETOOTH Function Wirelessly .............................. 18 Connecting a TV with an Analog Audio Cable ............................
Using the Control for HDMI Function Using the Control for HDMI Function ................................. 51 Using the “BRAVIA” Sync Function .................................53 Changing the Settings Customizing the Speaker Settings for Surround Sound .............. 54 Changing the Brightness of the Front Panel Display and BLUETOOTH Indicator (DIMMER) .............................. 55 Saving Power in Standby Mode ..................................... 56 Performing Easy Setup ...............
What’s in the Box • HDMI cable (supports the specification equal to Premium High Speed HDMI Cable with Ethernet) (1) • Bar Speaker (1) • Grille frame (1) • WALL MOUNT TEMPLATE (1) • Subwoofer (1) • Wall mounting bracket (2), Screw (2) • Remote control (1) • Startup Guide • R03 (size AAA) battery (2) • Operating Instructions 7US
What You Can Do with the System The system supports object-based audio formats such as Dolby Atmos and DTS:X as well as HDR video formats such as HDR10, HLG, and Dolby Vision. “Watching TV” (page 34) “Playing the Connected AV Device” (page 34) Blu-ray Disc™ player, cable box, satellite box, etc. Basic connection: Refer to “Startup Guide” (separate document). Other connections: See “Connecting to a TV or AV Device” (page 18).
“Connecting to a Wired Network” (page 25) Modem Router Internet “Connecting to a Wireless Network” (page 26) Wireless LAN router “Listening to Music on your PC via a Home Network” (page 39) “Listening to Music/Sound with the BLUETOOTH® Function” (page 36) “Listening to Music on the Mobile Device with Sony | Music Center” (page 42) “Listening to Sound of the Connected TV or Device from Headphones” (page 43) 9US
Guide to Parts and Controls Details are omitted from the illustrations. Bar Speaker (Main Unit) Front (power) button Turns on the system or sets it to standby mode. (input select) button Selects the input for playback on the system. BLUETOOTH indicator – Flashes quickly in blue: During pairing standby status – Flashes in blue: BLUETOOTH connection is being attempted. – Lights in blue: BLUETOOTH connection has been established.
Rear LAN(100) port HDMI IN 2 jack For specifications and notes on connections, see “Supported HDMI Video Formats” (page 77). ANALOG IN jack HDMI IN 1 jack For specifications and notes on connections, see “Supported HDMI Video Formats” (page 77). (USB) port (page 38) TV IN (OPT) jack IR repeater (page 33) Transmits the remote signal of the TV remote control to the TV. HDMI OUT (TV (ARC)) jack Connect a TV that has an HDMI input jack with an HDMI cable.
Subwoofer Power indicator – Flashes slowly in green: The subwoofer is not connected to the system. – Lights in green: The subwoofer is connected to the system. – Flashes twice repeatedly in green: The subwoofer is attempting to connect to the system. – Flashes/lights in orange: The software is updating. – Lights in red: The subwoofer is in standby mode. – Turns off: The subwoofer is turned off. (power) button Turns on or off the subwoofer.
Rear Speaker (SA-Z9R) (not supplied) You can enjoy the surround sound by connecting two rear speakers (not supplied). For connecting, see “Connecting the Subwoofer and Rear Speakers Wirelessly” (page 31). Power indicator – Flashes slowly in green: The rear speaker is not connected to the system. – Lights in green: The rear speaker is connected to the system. – Flashes twice repeatedly in green: The rear speaker is attempting to connect to the system. – Flashes/lights in orange: The software is updating.
Remote Control (power) Turns on the system or sets it to standby mode. BLUETOOTH (page 37) TV (page 34) HDMI1 (page 34) HDMI2 (page 34) ANALOG (page 40) USB (page 38) AUTO SOUND (page 46) CINEMA (page 46) MUSIC (page 46) GAME (page 46) NEWS (page 46) SPORTS (page 46) STANDARD (page 46) VOICE (page 47) VERTICAL S. (page 45) NIGHT (page 47) DIMMER (page 55) (MUSIC SERVICE) button This button does not work. It will be available after the software update.
REAR (rear speakers volume) +/– Adjusts the volume of the rear speakers when connecting rear speakers (not supplied). (volume) +*/– Adjusts the volume. SW (subwoofer volume) +/– Adjusts the volume of the subwoofer. (muting) Turns off the sound temporarily. DISPLAY Displays playback information on the TV screen. Playback information is not displayed for the TV input. Playback operation buttons / (previous/next) Selects the previous/next track or file.
About the Home Menu You can display the home menu on the TV screen by connecting the system and TV with the HDMI cable (supplied). From the home menu, you can set the various settings and select the input. The home menu is displayed in the language that is selected in [Easy Setup]. (The following screen is an example when English is selected.) Categories Category items Using the Home Menu ///, (enter) HOME BACK 1 Press HOME. The home menu appears on the TV screen.
[Listen] Selects the input of the audio device that is connected to the system. See “Listening to Music/Sound” (page 36). [Setup] Performs the basic initial settings by using [Easy Setup] or various advanced settings of the system. See “Performing Easy Setup” (page 56) or “Performing Advanced Settings” (page 57). If the system detects update information for the system on the network, the update notification and [Software Update] that performs the software update appears.
Connecting to a TV or AV Device Connecting to a TV or AV Device with the HDMI Cable Refer to Startup Guide (separate document). For the connection to a 4K TV or 4K Devices, see “Connecting a 4K TV and 4K Devices” (page 22) Connecting Sony TV with the BLUETOOTH Function Wirelessly When using Sony TV* with the BLUETOOTH function, you can listen to sound of the TV or device that is connected to the TV by connecting the system and TV wirelessly.
1 2 3 4 Set up the remote control. Turn on the TV. Turn on the system. Press and hold the BLUETOOTH button on the main unit and TV on the remote control simultaneously for 5 seconds. The system enters the pairing mode, “BT” appears in the front panel display, and the BLUETOOTH indicator flashes quickly. 5 6 7 8 On the TV, search the system by performing the pairing operation. The list of the BLUETOOTH devices that are searched appears on the TV screen.
Listening to Sound of the Paired TV You can turn the system on/off, adjust the volume, and mute the sound by using the TV remote control when connecting the TV to the system wirelessly. 1 2 3 Turn the TV on with the TV remote control. The system is turned on by interlocking with the TV power, and TV sound is output from the system. About operations with the remote control that is supplied with the system You can use the following buttons.
Connecting a TV with an Analog Audio Cable To connect the following devices to the system, connect them via the ANALOG IN jack on the system. – TVs that do not have an HDMI jack and optical digital output jack – Portable audio devices such as smartphones and WALKMAN® For listening to the connected device, see “Listening to the Device Connected with an Analog Audio Cable” (page 40). Note If the TV’s headphone jack also serves as an audio output jack, check the audio output settings of the TV.
Connecting a 4K TV and 4K Devices When an HDCP2.2Compatible HDMI Jack on the TV is Labeled with “ARC” All HDMI jacks on the system support 4K video format and HDCP2.2 (Highbandwidth Digital Content Protection System Revision 2.2). To watch 4K video content, connect the 4K TV and 4K devices to the system via an HDCP2.2-compatible HDMI jack on each device. You can only view 4K video content through the HDCP2.2-compatible HDMI jack connection. HDCP2.2compatible HDMI jack HDCP2.
1 2 3 Check which HDMI IN jack on your TV is compatible with HDCP2.2. Refer to the operating instructions of the TV. Connect the HDCP2.2-compatible HDMI IN jack on the TV and HDMI OUT jack on the main unit with the HDMI cable (supplied). TV connection is complete. Connect the HDCP2.2-compatible HDMI OUT jack of the 4K device and HDMI IN jack of the main unit with the HDMI cable (not supplied).
Setting the HDMI Signal Format to Watch 4K Video Content To watch 4K video content, select the appropriate setting for the connected 4K TV and 4K device. 1 2 3 4 Press HOME. The home menu appears on the TV screen. Select [Setup] - [Advanced Settings] on the home menu. Select [HDMI Settings] - [HDMI Signal Format]. The [HDMI Signal Format] screen appears on the TV screen. Select [HDMI IN 1]/[HDMI IN 2] (select the input that you want to change the setting of), then select the setting you want.
Tip Connecting to a Network Connecting to a Wired Network Prepare the network by connecting the system and PC to your home network with a LAN cable. Connecting to a PC or Router with a LAN Cable The following illustration is the example for connection of the system and PC to your home network. We recommend that you use a shielded straight interface cable (not supplied). Connecting by Obtaining the Network Information Automatically 1 2 3 4 Press HOME. The home menu appears on the TV screen.
5 6 Perform the setting by following the on-screen instructions. The system starts network settings and the network setting status appears. Press / to browse information, and then press . Select [Save & Connect]. The system starts connecting to the network. For details, refer to the messages that appear on the TV screen. Note If you select IPv6, you cannot use a fixed IP address. Connecting to a Wireless Network Prepare the network by connecting the system and PC to your wireless LAN router.
Connecting by Selecting the Network Name (SSID) Connecting by Using a Fixed IP Address If your wireless LAN router (access point) is not compatible with Wi-Fi Protected Setup (WPS), check the following information in advance. – The network name (SSID)* Select [New connection registration] [Manual registration] in step 4 of “Connecting by Selecting the Network Name (SSID)”and follow the on-screen instructions.
Preparing to Use the System Mounting the Bar Speaker or Rear Speaker on a Wall Mounting the Bar Speaker on a Wall 1 Prepare two screws (not supplied) that are suitable for the hole on the wall mounting bracket (supplied). 4 mm (3/16 in) You can mount the Bar Speaker or rear speakers on a wall. Rear speakers More than 30 mm (1 3/16 in) Wall mounting bracket 2 Stick WALL MOUNT TEMPLATE (supplied) on a wall.
3 Fasten the wall mounting brackets (supplied) securely with screws (not supplied) into the marks () on SCREW LINE () of WALL MOUNT TEMPLATE as in the illustration below. 368.5 mm (14 1/2 in) 6 Hang the attached screws on the wall mounting brackets. Align the screws on the rear of the Bar Speaker with the holes of the wall mounting brackets, then hang the Bar Speaker on the wall mounting brackets. 368.5 mm (14 1/2 in) Marks () Notes Mark () Wall mounting bracket 4 5 Remove WALL MOUNT TEMPLATE.
Mounting the Rear Speaker on a Wall 1 Prepare a screw (not supplied) that is suitable for the wall mount hole on the rear of the rear speaker. 4 mm (3/16 in) More than 30 mm (1 3/16 in) 5.0 mm (13/64 in) 10 mm (13/32 in) Hole on the rear of the rear speaker 2 Fasten the screw in the wall. approx. 9.5 mm (approx. 3/8 in) 30US 3 Hang the rear speaker by confirming the right/left of the rear speaker. Check the label on the rear of the rear speaker. “REAR R” is for the right, “REAR L” is for the left.
Attaching the Grille Frame You can protect the speakers by attaching the supplied grille frame. We recommend that you use the main unit without attaching the grille frame if you will be listening to High-Resolution Audio. Attach the grille frame parallel to the front panel. Attach it with the cushions of the grille frame on the bottom. Connecting the Subwoofer and Rear Speakers Wirelessly The subwoofer and rear speakers are connected to the system automatically when they are turned on.
Speakers Manually” (page 32). 3 Power indicator Install the rear speaker by confirming the right/left of the rear speaker. Check the label on the rear of the rear speaker. “REAR R” is for the right, “REAR L” is for the left.
Notes • If you perform [Start manual linking], [Link mode] of [Wireless Speaker Settings] is set to [Manual] automatically (page 58). • Only the subwoofer or rear speaker that is linked when selecting [Finish] in Step 6 is connected to the system. If you want to connect an additional speaker, perform the manual connection again.
Watching Images Watching TV 1 2 3 4 Press HOME. The home menu appears on the TV screen. Playing the Connected AV Device 1 Press HOME. The home menu appears on the TV screen. 2 Select [Watch], then select the input ([HDMI1] or [HDMI2]) on the home menu. • [HDMI1]: Device that is connected to the HDMI IN 1 jack • [HDMI2]: Device that is connected to the HDMI IN 2 jack The image of the selected device appears on the TV screen and the sound is output from the system.
You can adjust from 0 dB to 6 dB in 1 dB increments.
Listening to Music/Sound Listening to Music/ Sound with the BLUETOOTH® Function Listening to Music by Pairing the Mobile Device that is Connected for the First Time To use the BLUETOOTH function, you need to perform pairing of the system and mobile device in advance. 1 You can listen to music stored on a mobile device such as a smartphone or tablet via a wireless connection by connecting the system and mobile device with the BLUETOOTH function.
4 5 6 Make sure that the BLUETOOTH indicator on the main unit lights in blue. A connection between the system and mobile device has been established. Start audio playback with the music app on the connected mobile device. Sound is output from the main unit. Adjust the volume. • Adjust the volume by pressing +/– on the remote control. • Adjust the subwoofer volume by pressing SW +/– on the remote control (page 48).
• Press BLUETOOTH while the [Bluetooth Audio] screen appears on the TV screen. • Set [Bluetooth Mode] to [Transmitter] or [Off] (page 59). • Turn off the system or mobile device. Tip When the connection is not established, select “HT-Z9F” on the mobile device. Listening to Music on a USB Device You can play music files stored on a connected USB device. For playable types of files, see “Playable Types of Audio Files” (page 75). 1 2 3 4 5 Connect the USB device to the (USB) port. Press HOME.
damage to the USB device, turn the system off before connecting or removing the USB device. About the Music Playback Screen Select the following buttons on the screen by pressing /, then press . • (play)/ (pause) Starts or pauses playback. You can also operate by using on the remote control. • (previous)/ (next) Plays the previous or next music file. You can also operate by using / on the remote control. • (Shuffle play) Shuffles the playback order.
Listening to Music on a PC by Using Sony | Music Center PC Listening to the Device Connected with an Analog Audio Cable You can listen to sound of an audio device such as a TV, WALKMAN®, etc that is connected to the ANALOG IN jack on the system. 1 Wireless LAN router Smartphone or tablet You can play music files stored on the PC by operating Sony | Music Center that is installed to a mobile device such as a smartphone or tablet.
Using Chromecast builtin Note Depending on the country and region, Chromecast built-in and the Chromecastenabled app may not be provided. Chromecast built-in allows you to select music content from the Chromecastenabled app and play back audio contents on the system or group that the system is included in. 1 2 3 4 5 6 Press HOME. The home menu appears on the TV screen. Select [Listen] - [Chromecast built-in] on the home menu.
Enjoying music on the USB device Listening to Music on the Mobile Device with Sony | Music Center What You can Do with Sony | Music Center Sony | Music Center is an application for controlling compatible Sony audio devices using the mobile device such as a smartphone or tablet. You can play music on a device connected to the (USB) port on the main unit. Note What you can control with Sony | Music Center varies depending on the connected device.
Listening to Sound of the Connected TV or Device from Headphones 6 You can listen to sound of the connected TV or device from BLUETOOTH compatible headphones by connecting it with the BLUETOOTH function. Listening to Sound by Pairing with Headphones 1 2 3 4 5 Set the BLUETOOTH compatible headphones to the pairing mode. Refer to the operating instructions of the headphones for pairing method. Press HOME. The home menu appears on the TV screen. Select [Setup] - [Advanced Settings] on the home menu.
Listening to Sound with Paired Headphones 1 2 3 4 5 6 Set the BLUETOOTH function of the headphones to on. Press HOME. The home menu appears on the TV screen. Select [Setup] - [Advanced Settings] on the home menu. Select [Bluetooth Settings] [Bluetooth Mode] - [Transmitter]. The system enters BLUETOOTH transmission mode and “BT TX” appears in the front panel display. The system automatically reconnects to the headphones that was most recently connected to.
1 Adjusting the Sound Quality Enjoying Immersive Surround Experience (VERTICAL S.) You can feel immersed by the sound from not only the horizontal direction, but also from the upward direction by using Vertical Surround Engine* effectively for sound modes (page 46) other than [News]. This function also works for the 2.0 channel signal such as a TV program.
Setting the Sound Effect that is Tailored to Sound Sources (Sound Mode) You can easily enjoy pre-programmed sound effects that are tailored to different kinds of sound sources. Sound Mode selecting buttons 1 Press one of the sound mode selecting buttons (AUTO SOUND, CINEMA, MUSIC, GAME, NEWS, SPORTS, STANDARD) to select the sound mode. The selected sound mode appears on the TV screen.
Making Dialogs Clearer (VOICE) Enjoying Clear Sound with Low Volume at Midnight (NIGHT) Sound is output at low volume with minimum loss of fidelity and clarity of dialog. VOICE NIGHT 1 2 Press VOICE. The voice mode appears on the TV screen. Press the button repeatedly to select the voice mode. Mode Explanation [Up Off] Standard [Up 1] Dialog is easily heard by enhancing dialog range. [Up 2] Dialog range is enhanced, and dialog sound may be easy to hear for the elderly. 1 2 Press NIGHT.
Adjusting the Volume of the Subwoofer and Rear Speakers Adjusting the Delay Between the Picture and Sound The subwoofer is designed for playback of bass or low frequency sound. The rear speakers are designed for playback of the surround part of the multi-channel sound. When the sound does not match the pictures on the TV screen, you can adjust the delay between the picture and sound. The setting method differs depending on the input.
When Watching Another Device 1 2 3 Select [A/V Sync]. Playing Compressed Audio Files or CDs by Upscaling to Near HiResolution Sound Quality (DSEE HX) Adjust the delay using /, then press . You can adjust from 0 msec to 300 msec in 25 msec increments. DSEE HX upscales existing sound sources to near hi-resolution sound quality, and it makes you feel as if you are in a recording studio or at a concert. Press OPTIONS. The options menu appears on the TV screen. 1 2 3 4 Press HOME.
Enjoying Multiplex Broadcast Sound (AUDIO) You can enjoy multiplex broadcast sound when the system receives a Dolby Digital multiplex broadcast signal. AUDIO 1 Press AUDIO. The audio signal appears in the front panel display. 2 Press the button repeatedly to select the desired audio signal. Audio signal Explanation “MAIN” Sound of the main language will be output. “SUB” Sound of the sub language will be output. “MN/SB” Mixed sound of both the main and sub languages will be output.
Tip Using the Control for HDMI Function Using the Control for HDMI Function Connecting a device such as a TV or Bluray Disc player compatible with the Control for HDMI function* by an HDMI cable enables you to easily operate the device by a TV remote control. The following functions can be used with the Control for HDMI function.
be available. For details, refer to the operating instructions of your TV. • Depending on the TV, if the TV sound was output from the speakers of the TV the previous time you watched the TV, the system may not turn on by interlocking with the TV power even if the TV is turned on. Audio Return Channel If the system is connected to a TV’s HDMI IN jack compatible with Audio Return Channel (ARC), you can listen to TV sound from the speakers of the system without connecting an optical digital cable.
Language Follow When you change the language for the on-screen display of the TV, the system’s on-screen display language is also changed. Using the “BRAVIA” Sync Function In addition to the Control for HDMI function, you can also use the following functions on devices compatible with the “BRAVIA” sync function. • Sound mode/Scene Select function • Home Theatre Control Note These functions are proprietary functions of Sony. This function cannot operate with products other than those manufactured by Sony.
Tip Changing the Settings Customizing the Speaker Settings for Surround Sound You can change measurement units (feet or meters) by pressing OPTIONS. [Level] The default settings are underlined. Adjust the sound level of the speakers. You can set the value from -6.0 dB to 6.0 dB (0.5 dB step). [Front]: Sets the front speaker level. [Subwoofer]: Sets the subwoofer level. [Rear Speaker (L)]*: Sets the left rear speaker level. [Rear Speaker (R)]*: Sets the right rear speaker level.
Changing the Brightness of the Front Panel Display and BLUETOOTH Indicator (DIMMER) this case, the brightness of the front panel display is same as “DARK.” You can change the brightness of the front panel display and BLUETOOTH indicator. DIMMER 1 2 Press DIMMER. The display mode appears in the front panel display. Press the button repeatedly to select the desired display mode. Mode Explanation “BRIGHT” The front panel display and BLUETOOTH indicator light brightly.
Saving Power in Standby Mode Check that you have made the following settings: – [Standby Through] is set to [Off] (page 59). – [Network/Bluetooth Standby] is set to [Off] (page 60). Performing Easy Setup You can make basic initial settings, speaker settings, and network settings for the system easily by performing Easy Setup. 1 2 3 4 56US Press HOME. The home menu appears on the TV screen. Select [Setup] - [Easy Setup] on the home menu. The [Easy Setup] screen appears on the TV screen.
Performing Advanced Settings You can make various adjustments to items such as picture and sound. The default settings are underlined. 1 2 3 Press HOME. The home menu appears on the TV screen. Select [Setup] - [Advanced Settings] on the home menu. The [Advanced Settings] screen appears on the TV screen. Select the setting item. Setting item Explanation [Speaker Settings] Makes the speaker and subwoofer settings for installing and connections.
[Speaker Settings] • [Software Version] You can check the software version of the subwoofer and rear speakers. [Manual Speaker Settings] You can perform the speaker settings to obtain the best possible surround sound. For details, see “Customizing the Speaker Settings for Surround Sound” (page 54). [Wireless Speaker Settings] You can perform connecting settings of the wireless speakers (subwoofer and rear speakers). • [Link mode] You can set the connection method for the subwoofer and rear speakers.
Dolby format. Disables sound effects other than Dolby format. [Off]: Disables the sound effects. Select this when you do not want to set the upper limit of sampling frequency. [Advanced Auto Volume] You can reduce the change of volume due to the input signal. This function is effective when the volume of a TV commercial is louder than that of the TV program. [On]: Adjusts the volume automatically. [Off]: Off Note This function is not suitable for listening to music.
[Transmitter]: This system is in transmitter mode, which enables it to send audio to the BLUETOOTH compatible headphones. If you switch the input of the system, “BT TX” appears on the front panel display. [Off]: The BLUETOOTH function is turned off and you cannot select the [Bluetooth Audio] input. may become unstable when the link quality is not good enough. If audio playback is unstable in this mode, select [Auto]. [Auto]: The data transfer rate is automatically changed depending on the environment.
(page 62). [Off]: Off [Network Settings] [Auto Update Settings] [Internet Settings] • [Auto Update] [On]: Software update is automatically executed between 2 a.m. and 5 a.m. local time in the selected [Time Zone] while this system is not in use. If you select [Off] in [Network/Bluetooth Standby], software update is performed after you turn off the system. [Off]: Off • [Time Zone] Select your country/region. Connect the system to the network beforehand.
Updating the Software By updating your software to the latest version, you can take advantage of the newest functions. For information about update functions, visit the following website: http://www.sony.com/soundbarsupport Notes • It may take up to 40 minutes for the update to be completed. • An Internet environment is necessary to perform updates via Internet.
The system turns off when the TV is turned off. Troubleshooting Troubleshooting If you experience any of the following difficulties while using the system, use this troubleshooting guide to help remedy the problem before requesting repairs. Should any problem persist, consult your nearest Sony dealer. Be sure to bring your main unit, subwoofer, and rear speakers (not supplied), even if it seems as though only one has a problem, when you request to repair. Power The system does not power up.
When there is no picture from the connected device or the picture from the connected device is not output correctly, set [Setup] - [Advanced Settings] - [HDMI Settings] - [HDMI Signal Format] - [HDMI IN 1]/[HDMI IN 2] to [Standard format] (page 24). If you connect a device supporting HDCP 2.2, be sure to connect the device to the HDMI IN jack and the TV to the HDMI OUT jack of the system. The system is connected to an input device that is not HDCP (Highbandwidth Digital Content Protection) compliant.
No TV sound is output from the system. Check the type and connection of the HDMI cable, optical digital cable, or analog audio cable that is connected to the system and the TV (refer to the supplied Startup Guide). Disconnect the cables that are connected between the TV and the system, then connect them firmly again. Disconnect the AC power cords (mains leads) of the TV and the system from the AC outlets (mains), then connect them again.
The TV sound from this system lags behind the image. Set [A/V Sync] to 0 msec if it is set to the range between 25 msec and 300 msec (page 48). A time gap between the sound and picture may occur depending on the sound source. If your TV has a function that delays the image, use it for adjustment. No sound or only a very low-level sound of the device connected to the system is heard. Press + on the remote control and check the volume level (page 14).
If you change the [RF Channel] setting from [Off] to [On] (page 33), it may take 1 minute for the sound to be output. Sound skips or has noise. If there is a device nearby that generates electromagnetic waves, such as a wireless LAN or a microwave oven in use, locate the system apart from it. If there is an obstacle between the main unit and the subwoofer, move or remove it. Locate the main unit and the subwoofer as close as possible. Change the [RF Channel] setting (page 33).
Mobile Device Connection Pairing cannot be achieved. Bring this system and the BLUETOOTH device closer together. Make sure this system is not receiving interference from a wireless LAN device, other 2.4 GHz wireless devices, or a microwave oven. If a device that generates electromagnetic radiation is nearby, move the device away from this system. BLUETOOTH connection cannot be completed. Make sure that the BLUETOOTH indicator of the main unit is lit (page 37).
No sound is output from the connected BLUETOOTH headphones. Make sure that the BLUETOOTH indicator of the main unit is lit (page 10). Bring this system and the BLUETOOTH device closer together. If a device that generates electromagnetic radiation, such as a wireless LAN device, other BLUETOOTH devices, or a microwave oven is nearby, move the device away from this system. Remove any obstacle between this system and the BLUETOOTH device, or move this system away from the obstacle.
Internet Connection You cannot connect the system to the Internet. Check the wired or wireless LAN connection. Restart the router or wireless LAN router. Remote Control The remote control of this system does not function. Point the remote control at the remote control sensor on the main unit (page 10). Remove any obstacles in the path between the remote control and the system. Replace both batteries in the remote control with new ones, if they are weak.
panel display returns to the normal display. “BT TX” appears in the front panel display. Set [Bluetooth Mode] to [Receiver]. “BT TX” appears if [Bluetooth Mode] is set to [Transmitter] (page 59). The system restarts. When connecting to a TV with a resolution that is different from that of the system, the system may restart to reset the picture output setting. Sensors of the TV do not work properly.
Resetting the System If the system still does not operate properly, reset the system as follows. 1 2 3 4 5 Press HOME. The home menu appears on the TV screen. Select [Setup] - [Advanced Settings] on the home menu. Select [Resetting]. Select the menu item you want to reset. Select [Start]. To cancel resetting Select [Cancel] in step 5. If You Cannot Perform Resetting Using the Home Menu Press and hold (power) and – (volume) on the main unit for more than 5 seconds.
USB section Additional Information (USB) port: Type A (For connecting USB memory) LAN section Specifications Bar Speaker (SA-Z9F) Amplifier section U.S. models: POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (FTC) Front L + Front R: With 4 ohms loads, both channels driven, from 200 - 20,000 Hz; rated 35 W per channel minimum RMS power, with no more than 1% total harmonic distortion from 250 mW to rated output.
3) 4) 5) Codec: Audio signal compression and conversion format Abbreviation for Subband Codec Abbreviation for Advanced Audio Coding Front L/Front R/Center speaker block section Speaker system Full Range speaker system, Acoustic suspension Speaker 46 mm (1 13/16 in.) cone type General Power requirements 120 V AC, 60 Hz Power consumption On: 52 W [Network/Bluetooth Standby] - [On]: Less than 2.4 W [Network/Bluetooth Standby] - [Off]: Less than 0.5 W Dimensions* (approx.
Playable Types of Audio Files Codec Extension MP3 (MPEG-1 Audio Layer III) .mp3 AAC/HE-AAC .m4a, .aac, .mp4, .3gp WMA9 Standard .wma LPCM .wav FLAC .flac DSF .dsf DSDIFF* .dff AIFF .aiff, .aif ALAC .m4a Vorbis .ogg Monkey’s Audio .ape * The system does not play DST encoded files. Notes • Some files may not play depending on the file format, file encoding, recording condition, or other conditions. • Some files edited on a PC may not play.
Supported Input Audio Formats Audio formats supported by this system are as follows. Format Function “HDMI1” “HDMI2” “TV” (ARC) “TV” (OPT) LPCM 2ch LPCM 5.1ch – – LPCM 7.1ch – – Dolby Digital Dolby TrueHD – – Dolby Digital Plus – Dolby Atmos - Dolby TrueHD – – Dolby Atmos - Dolby Digital Plus – DTS DTS-ES Discrete 6.1, DTS-ES Matrix 6.
Supported HDMI Video Formats Video formats supported by this system are as follows. Resolution Frame Rate 4K 4096 × 2160p3) 3840 × 2160p 50/59.94/60 Hz 23.98/24/25/29.97/30 Hz 50/59.94/60 Hz 4K 4096 × 2160p3) 3840 × 2160p 23.98/24/25/29.97/30 Hz 1920 × 1080p 25/29.97/30/50/ 59.94/60 Hz 1920 × 1080i 50/59.
• When the TV input is selected, video signals via one of the HDMI IN 1/2 jacks selected last time are output from the HDMI OUT (TV (ARC)) jack. • This system supports “TRILUMINOS.” • All HDMI IN and HDMI OUT jacks support bandwidth up to 18Gbps, HDCP 2.21), BT.2020 wide color spaces2), and HDR (High Dynamic Range)3) contents passthrough. • When connecting to a TV with a resolution that is different from that of the system, the system may restart to reset the picture output setting. 1) 2) 3) HDCP 2.
On BLUETOOTH Communication • BLUETOOTH devices should be used within approximately 10 meters (33 feet) (unobstructed distance) of each other. The effective communication range may become shorter under the following conditions.
COPYRIGHT END USER LICENSE AGREEMENT IMPORTANT: BEFORE USING THE SOFTWARE, PLEASE READ THIS END USER LICENSE AGREEMENT (“EULA”) CAREFULLY. BY USING THE SOFTWARE YOU ARE ACCEPTING THE TERMS OF THIS EULA. IF YOU DO NOT ACCEPT THE TERMS OF THIS EULA, YOU MAY NOT USE THE SOFTWARE. This EULA is a legal agreement between you and Sony Electronics Inc. (“SONY”).
The software, network services or other products other than SOFTWARE upon which the SOFTWARE’S performance depends might be interrupted or discontinued at the discretion of the suppliers (software suppliers, service suppliers, or SONY). SONY and such suppliers do not warrant that the SOFTWARE, network services, contents or other products will continue to be available, or will operate without interruption or modification.
control, direct life support machines, or weapons systems, in which the failure of the SOFTWARE could lead to death, personal injury, or severe physical or environmental damage (“HIGH RISK ACTIVITIES”). SONY, each of the THIRDPARTY SUPPLIERS, and each of their respective affiliates specifically disclaim any express or implied warranty, duty or condition of fitness for HIGH RISK ACTIVITIES.
OR LIMITATION MAY NOT APPLY TO YOU. GOVERNING LAW AND JURISDICTION AUTOMATIC UPDATE FEATURE The United Nations Convention on Contracts for the International Sale of Goods shall not apply to this EULA. This EULA shall be governed by the laws of Japan, without regards to conflict of laws provisions. Any dispute arising out of this EULA shall be subject to the exclusive venue of the Tokyo District Court in Japan, and the parties hereby consent to the venue and jurisdiction of such courts.
SOLE DISCRETION BY POSTING NOTICE ON A SONY DESIGNATED WEB SITE, BY EMAIL NOTIFICATION TO AN EMAIL ADDRESS PROVIDED BY YOU, BY PROVIDING NOTICE AS PART OF THE PROCESS IN WHICH YOU OBTAIN UPGRADES/UPDATES OR BY ANY OTHER LEGALLY RECOGNIZABLE FORM OF NOTICE. If you do not agree to the amendment, you should promptly contact SONY for instructions. Your continued use of the SOFTWARE after the effective date of any such notice shall be deemed your agreement to be bound by such amendment.
the ventilation holes and cause malfunctions. • Do not place metal objects other than a TV around the system. Wireless functions may be unstable. • If the system is being used in combination with a TV, VCR, or tape deck, noise may result and picture quality may suffer. In such a case, place the system away from the TV, VCR, or tape deck. • Use caution when placing the system on a surface that has been specially treated (with wax, oil, polish, etc.), as staining or discoloration of the surface may result.
Copyrights and Trademarks This system incorporates Dolby* Digital and the DTS** Digital Surround System. * Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, Dolby Atmos, Dolby Vision, and the double-D symbol are trademarks of Dolby Laboratories. **For DTS patents, see http:// patents.dts.com. Manufactured under license from DTS, Inc. DTS, the Symbol, DTS and the Symbol together, DTS:X, and the DTS:X logo are registered trademarks and/or trademarks of DTS, Inc.
more data** than those other technologies to be transmitted over a Bluetooth wireless network with unprecedented sound quality, by means of efficient coding and optimized packetization. All other trademarks are trademarks of their respective owners. * excluding DSD format contents **in comparison with SBC (Subband Coding) when the bitrate of 990 kbps (96/48 kHz) or 909 kbps (88.2/44.
Index A Advanced Auto Volume 59 Audio DRC 58 Audio Return Channel (ARC) 11, 52, 59 Audio Settings 58 Auto Standby 60 Auto Update 61 Auto Update Settings 61 B Bluetooth Codec - AAC 60 Bluetooth Codec - LDAC 60 Bluetooth Mode 59 Bluetooth Settings 59 BT.2020 78 C Control for HDMI 51, 59 D Device List 60 Device Name Setting 61 DIMMER 55 DSEE HX 58 H HDCP 2.
Support pages Pages d’assistance Páginas de soporte Find information on software updates: Trouvez des informations sur les mises à jour de logiciel : Encuentre información sobre las actualizaciones de software: http://www.sony.
1 What’s in the box Bar Speaker (1) Subwoofer (1) Remote control (1) Grille frame (1) HDMI cable (supports the specification equal to Premium High Speed HDMI cable with Ethernet) (1) R03 (size AAA) battery (2) WALL MOUNT TEMPLATE (1) Wall mounting bracket (2), Screw (2) Operating Instructions Connecting with a TV and other devices Are there any HDMI IN jacks labeled “ARC” on your TV? YES NO Startup Guide (this document) Startup Guide Sound Bar : HT-Z9F Blu-ray Disc™ player, cable box or sate
2 6 Setting up the remote control Enjoying immersive surround experience VERTICAL S. 3 Ç +/– Turning on the TV SW Ç +/– ̽ Press VERTICAL S. on the remote control of the system. Enjoy movies, music, and more with sound that flows all around the room, surrounding you from all directions. ̾ Adjust the volume. Adjust the volume of the Bar Speaker by pressing Ç +/− on the remote control of the system. Adjust the volume of the subwoofer by pressing SW Ç +/− on the remote control of the system.
HT-Z9F Z9F 3.1ch Dolby Atmos® Soundbar Feel the thrill of your favorite shows and movies. The Z9F 3.1ch Dolby Atmos/DTS:X Soundbar’s new Vertical Surround Engine places you in the middle of the action. Five different sound modes optimize audio to what you’re hearing. Wireless and networkcapable, the Z9F can also connect to select rear speakers for a full-room solution that provides a cinematic experience. Bullets r 3.
Use the Sony | Music Center App (previously called SongPal) [FN_04] to group selected Sony soundbars and speakers together, then stream music in multiple rooms.3 Connect to rear speakers Extend your surround sound setup with wireless rear speakers. Specifications Amplifier Amplifier S-master Digital Amplifier Yes DSEE HX Yes Upscale Up to: 88.2kH,96kHz/24bit Upscale from: 44.1kHz,48kHz/16bit,24bit Night Mode Yes Number of amp. channels 3.
HDMI™ Inputs and Outputs Sound mode BRAVIA® SYNC™ (CEC Control) Yes (HDMI CEC) Home Theatre Control Yes Scene Select Sync Yes Ethernet Yes USB USB type A File System: exFAT,FAT12/16/32,vFAT External HDD: Yes (less than 2TB / Read only) Auto Auto Sound: Yes GAME Yes Music Yes SPORTS Yes Standard Yes Color Black NUX Yes (GUI only) Auto Power Off (Auto Stand-by) Yes Easy Setup (Quick Setup) Yes USB Yes Color Colors Convenient Features GUI FW Update HDMI Features OSD language
Playback Control Repeat All Yes Repeat Folder (music) Yes Repeat Track Yes Resume Stop Resume: Yes Shuffle Yes Enclosure Type Bass Reflex Speaker Type Wireless Speaker Unit Subwoofer: 160 mm Woofer unit Number of speaker: 2 Enclosure Type: Acoustic suspention Unit size: 46 mm Diaphragm material: Mica Power Bar: 52W SW: 20W Power Bar: 0.5W SW: 1W Bluetooth standby mode: Bar: 2.4W SW:1W Power 120V AC A2DP(SINK) Yes (1.
1. Interoperability and compatibility among Bluetooth® devices vary. 2. Requires HDMI® cable; sold separately. 3. Requires download of Sony Music Center app for iPhone from the App Store or for Android from Google Play. User must link compatible devices in order to control operation. Subject to app terms and conditions.Software update required, see compatible products. © 2018 Sony Electronics Inc. All rights reserved. Reproduction in whole or in part without written permission is prohibited.
SONY: Sound Bar HT-Z9F/HT-ZF9 4-736-258-11(1) 1111111111111111111111111111111111111111111111111111111 * 4 7 3 6 2 5 8 1 1 * (1) Enjoy lmmersive Surround Experience Right Now! • Experience immersive surround sound by playing the built-in sample sound of Sound Bar Sound Bar starts playback of the sample sound by pressing and holding the -E) button on Sound Bar for 5 seconds. To stop playback, press the -E) button again.
I WALL MOUNT TEMPLATE TV BOTTOM LINE Wl'.llilll-5-1' / I LIGNE ARRIERE DU TELEVISEUR I LINIE FOR UNTERKANTE DES FERNSEHGERATS I LiNEA INFERIOR TELEVISOR I LIJN ONDERKANT TV I LINEA INFERIORE TV I LINIA DOLNA TELEWIZORA I nii1HII15l HII13A TEnEBII130PA I ~1Jl~~$~ I ,:,~~ ~~ .,b.;JI I 0~}>_,.b ~4 .W. I E§,~f)1~$~ I Ut'llth-.l~~"JJEl·rni I LINHA INFERIOR DA TV ~llilt-T/7'L.
GARANTIE LIMITEE E.-U. et Canada uniquement - 1 an Sony Electronics Inc. exclusivement pour les achats effectues aux Etats-Unis et Sony du Canada Ltee. exclusivement pour les achats effectues au Canada (collectivement " Sony , ) garantit ce produit contre les defauts de materiaux ou de fabrication pour le proprietaire d'origine et tousles proprietaires utilisateurs finaux suivants (« Vous , ou "Vos »)pendant Ia periode definie cidessus et comme indique dans les presentes.
1111111111111111111111111111111111111111111111111111111 4-599-1 06-11 LIMITED WARRANTY I Video & Audio I U.S. and Canada only- 1 year Sony Electronics Inc. solely for purchases made in the United States and Sony of Canada Ltd. solely for purchases made in Canada (collectively "Sony") warrants this product against defects in material or workmanship for the original owner and any subsequent end user owner(s) ("You" or ''Your") for the time period set forth above as set forth herein.