4-108-811-51(1) Wireless Stereo Headset DR-BT160AS ©2008 Sony Corporation Operating Instructions US Manual de instrucciones ES
WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To reduce the risk of electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To reduce the risk of fire, do not cover the ventilation of the apparatus with newspapers, tablecloths, curtains, etc. And do not place lighted candles on the apparatus.
Note This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
US
Table Of Contents What is Bluetooth wireless technology? .................. 6 Welcome! .......................... 7 3 steps to Bluetooth function .... 8 Location and Function of Parts ............................... 9 Charging the unit ........... 10 Pairing ............................. 12 What is pairing? ...................... 12 Procedures of pairing .............. 12 US Wearing the unit ............. 14 Indications of Bluetooth function ....................... 15 US Listening to music .........
What is Bluetooth wireless technology? Bluetooth® wireless technology is a short-range wireless technology that enables wireless data communication between digital devices, such as a computer or digital camera. Bluetooth wireless technology operates within a range of about 10 meters (about 30 feet). Connecting two devices as necessary is common, but some devices can be connected to multiple devices at the same time.
Welcome! Thank you for purchasing this Sony Wireless Stereo Headset. This unit uses Bluetooth wireless technology. • Enjoy music wirelessly from Bluetooth Stereo-enabled music players and mobile phones.*1 • Ultra secure, lightweight and balanced fit with dual support mechanism and adjustable earpiece shaft for active use. • Soft and flexible contoured design for comfortable over-the-ear fit. • Water resistant. • Embedded microphone enables hand-free conversation from Bluetoothenabled mobile phone.
3 steps to Bluetooth function Pairing First, register (“pair”) a Bluetooth device (mobile phone, etc.) and this unit with each other. Once pairing is established, there is no need for pairing again. Bluetooth mobile phone, etc. Wireless Stereo Headset Pairing c Page 12 - 13 V V Listening to music Calling Bluetooth connection Bluetooth connection Operate the Bluetooth device to make the Bluetooth connection.
GETTING STARTED Location and Function of Parts 1 Microphone 2 Indicator (red) Indicates the power status of the unit. 3 Indicator (blue) Indicates the communication status of the unit. 4 POWER button 5 Earpiece 6 RESET button 7 PAIRING button 8 Multi function button Controls various call functions. 9 Jog switch Controls various functions when listening to music. Adjust the volume of this unit when talking over the telephone.
Charging the unit The unit contains a rechargable Lithium-Ion battery, which should be charged before using for the first time. 1 Remove the cover attached to the DC IN 3 V jack on the unit. 3 Make sure that indicator (red) lights up while charging. 2 Connect the supplied AC power adaptor to the DC IN 3 V jack on the unit. Wireless Stereo Headset To DC IN 3 V jack To an AC outlet Charging is completed in about 2.5 hours* and the indicator (red) goes off automatically.
In this case, charge again within the above-mentioned temperature range. If the problem persists, consult your nearest Sony dealer. Notes • If the battery is not used for a long time, battery may be quickly depleted, however, after a few recharges, battery life will improve. • If the life of the built-in rechargeable battery drops to half the normal length, the battery should be replaced. Consult your nearest Sony dealer for replacement of the rechargeable battery.
Pairing What is pairing? Bluetooth devices need to be “paired” with each other beforehand. Once Bluetooth devices are paired, there is no need for pairing again, except in the following cases: • Pairing information is deleted after repair, etc. • This unit is paired with 9 or more devices. This unit can be paired with up to 8 devices; if a new device is paired after 8 devices have been paired, the device whose latest connection time is the oldest among the 8 paired devices is replaced by the new one.
3 Perform pairing procedure on the Bluetooth device to detect this unit. The list of detected devices appears on the display of the Bluetooth device. This unit is displayed as “DR-BT160AS.” If “DR-BT160AS” is not displayed, repeat from step 1. Notes • For details, refer to the operating instructions supplied with the Bluetooth device.
Wearing the unit 1 Place the hangers on both ears. The headset with the POWER button is for the right ear. 2 Adjust the neckband and the earpiece angle for a comfortable fit. Adjust the length of the adjustable earpiece shaft. Adjust the angle of the adjustable earpiece shaft so that the earpieces fit comfortably in your ears. 14 US How to install the earbuds correctly If the earbuds do not fit your ears correctly, low-bass sound may not be heard.
Indications of Bluetooth function B : Indicator (blue) R : Indicator (red) B R Connectable – – B R – – – – – – – – – ... Connecting B R – – – – – – – – – – – – – – – – – – – – ... ... Phone Music Connected Pairing Flashing patterns Searching Connecting Status HFP/HSP or A2DP B (standby for receiving audio signal) – – – – – – – – – – – – – – – ... – ... – – – – – – – – – – – – – – ... – – R – HFP/HSP and A2DP B – – – – – – – – – – ...
OPERATING THE UNIT Listening to music When not calling with this unit, do not make the last connected Bluetooth device ready for HFP or HSP connection. To make or receive a call while playing back music, see page 22. VOL + POWER button VOL – 2 Make the Bluetooth connection (A2DP) from a Bluetooth device to this unit. Refer to the operating instructions supplied with the Bluetooth device on how to operate it. Check the following before operating the unit. – The Bluetooth device is turned on.
To adjust the volume Push the jog switch up or down while listening to music to adjust the volume. Tips • Depending on the Bluetooth device, it may be necessary to adjust the volume on the connected Bluetooth device as well. • Volume for calling and listening to music can be adjusted independently. Even if you change the volume while calling, the volume for music playback does not change. • The volume level on this unit may vary depending on the connected Bluetooth device.
Tip Depending on the Bluetooth device, the fast-forward or fast-rewind operation can be done by performing the following procedures on this unit. 1 Press and hold the POWER button for about 2 seconds to turn off the unit. 2 Press and hold the POWER button and jog switch (Nx) for about 7 seconds. The indicator (blue) flashes once. The setting can be released by repeating the above procedures. At this time, the indicator (blue) flashes twice.
Calling VOL + When this unit does not connect to a Bluetooth mobile phone automatically POWER button You can make a connection by operating Bluetooth mobile phone or by operating this unit to connect the last connected Bluetooth device. VOL – Multi function button Check the following before operating the unit. – The Bluetooth function is active on the mobile phone. – Pairing of this unit and the Bluetooth mobile phone is complete.
B To make a connection with the last connected Bluetooth device by operating this unit 1 Press the multi function button. When listening to music with this unit, a Bluetooth connection cannot be made with the multi function button. To call To adjust the volume 1 Use the buttons on your Push the jog switch up or down to adjust the volume. Note mobile phone when making a call. If no dial tone is heard on this unit, press and hold the multi function button for about 2 seconds.
Controlling the Bluetooth mobile phone – HFP, HSP The operation of the buttons on this unit varies depending on your mobile phone. HFP (Hands-free Profile) or HSP (Headset Profile) is used for Bluetooth mobile phone. Refer to the operating instructions supplied with your Bluetooth mobile phone on supported Bluetooth profiles or how to operate. *1 Some functions may not be supported depending on the Bluetooth mobile phone. Refer to the operating instructions supplied with your mobile phone.
Calling while playing back music The Bluetooth connection using HFP or HSP as well as A2DP is necessary to make a call while playing back music. For example, to make a call using a Bluetooth mobile phone while listening to music on a Bluetooth compatible music player, this unit needs to be connected to the mobile phone using HFP or HSP. Make a Bluetooth connection between this unit and the device in use following the procedures outlined below.
ADDITIONAL INFORMATION Precautions On Bluetooth communication • Bluetooth wireless technology operates within a range of about 10 meters (about 30 feet). Maximum communication range may vary depending on obstacles (human body, metal, wall, etc.) or electromagnetic environment. • The antenna is built into the right housing as illustrated in the dotted line. The sensitivity of the Bluetooth communication will improve by placing a connected Bluetooth device on your right side.
On splash proof structure Others This unit has splash proof structure which prevents the function of the unit from being affected by splash of water (except for earpiece and AC power adaptor). However, this unit cannot be used in water. Take the following precautions. • Do not put this unit in water or use it in a place with high humidity such as bathroom. • In the event water is spilled on the earpiece, wipe off the water with a dry cloth, etc. to dry the earpiece before using this unit.
Troubleshooting If you run into any problems using this unit, use the following checklist and read the product support information on our website. Should any problem persist, consult your nearest Sony dealer. Common The unit is not turned on. The correspondence distance is short. (Sound skips.) , Bring this unit and the Bluetooth device closer together.
When listening to music No sound , Check that both this unit and the Bluetooth device are turned on. , A2DP Bluetooth connection is not made between this unit and the Bluetooth device. Make an A2DP Bluetooth connection (page 16). , Check that music is being played back by the Bluetooth device. , Check that the volume of the unit is not set too low. , Turn up the volume on the connected device if necessary. , Pair this unit and Bluetooth device again (page 12).
Initializing the unit You can reset this unit to its default (such as volume setting) and delete all pairing information. 1 If this unit is turned on, press and hold the POWER button for about 2 seconds to turn off this unit. 2 Press and hold the POWER button and multi function button together for about 7 seconds. The indicator (blue) and indicator (red) flash together four times, and this unit is reset to the default setting. All pairing information is deleted.
Specifications General Communication System Bluetooth Specification version 2.0 + EDR*1 Output Bluetooth Specification Power Class 2 Maximum communication range Line of sight approx. 10 m (30 ft) *2 Power source DC 3.7 V: Built-in lithium-ion rechargeable battery Modulation method FHSS Mass Approx. 40 g (1.
ADVERTENCIA Para reducir el riesgo de incendios o electrocución, no exponga el aparato a la lluvia ni a la humedad. Tecnología de codificación de audio MPEG Layer-3 y patentes bajo licencia de Fraunhofer IIS y Thomson. Para evitar descargas eléctricas, no abra la unidad. En caso de avería, solicite los servicios de personal cualificado. Información No sitúe el aparato en un espacio cerrado, como una estantería o un armario empotrado.
Para clientes de los EE UU RECYCLADO DE BATERIAS DE IONES DE LITIO Índice Las baterías de iones de litio son reciclables. Usted podrá ayudar a conservar el medio ambiente devolviendo las baterías usadas al punto de reciclaje mas cercano. Para más información sobre el reciclado de baterías, llame al número gratuito1-800-822-8837, o visite http://www.rbrc.org/ ¿Qué es la tecnología inalámbrica Bluetooth? .................... 4 Bienvenido ........................
¿Qué es la tecnología inalámbrica Bluetooth? Bluetooth® es una tecnología inalámbrica de corto alcance que permite la comunicación inalámbrica de datos entre dispositivos digitales como, por ejemplo, un ordenador o una cámara digital. La tecnología inalámbrica Bluetooth funciona en un rango de aproximadamente 10 metros. Lo habitual es conectar dos dispositivos, pero algunos dispositivos admiten la conexión a varios dispositivos a la vez.
Bienvenido Gracias por adquirir los auriculares estéreo inalámbricos de Sony. Esta unidad utiliza la tecnología inalámbrica Bluetooth. • Escuche música sin cables con reproductores con capacidad para utilizar la tecnología Bluetooth estéreo y teléfonos móviles.*1 • Ajuste equilibrado, ligero y de máxima seguridad con mecanismo de soporte doble y eje ajustable del auricular para uso activo. • Diseño de contorno suave y flexible para proporcionar un ajuste cómodo sobre la oreja. • Impermeable.
Funcionamiento del dispositivo Bluetooth en sólo 3 pasos Emparejamiento En primer lugar, registre (“empareje”) un dispositivo Bluetooth (teléfono móvil, etc.) y esta unidad entre sí. Una vez que se haya establecido el emparejamiento, no será necesario volver a realizarlo. Auriculares estéreo inalámbricos Teléfonos móviles Bluetooth, etc.
PROCEDIMIENTOS INICIALES Ubicación y función de los componentes 1 Micrófono 2 Indicador (rojo) Indica el estado de la alimentación de la unidad. 3 Indicador (azul) Indica el estado de la comunicación de la unidad. 4 Botón POWER 5 Auricular 6 Botón RESET Pulse este botón si la unidad no funciona correctamente. Al realizar esta operación, la información del emparejamiento no se elimina. 7 Botón PAIRING 8 Botón multifunción Controla varias funciones de llamada.
Carga de la unidad La unidad contiene una batería de iones de litio recargable, que se debe cargar antes de utilizarla por primera vez. 1 Retire la tapa instalada en la toma DC IN de 3 V en la unidad. 2 Conecte el adaptador de 3 Asegúrese de que el indicador (rojo) se ilumina durante el proceso de carga. alimentación de ca suministrado a la toma DC IN 3 V de esta unidad.
Precaución Duración* Si la unidad detecta un problema durante la carga, es posible que el indicador (rojo) se apague aunque no haya finalizado la carga. Compruebe si se debe a las causas siguientes: – La temperatura ambiental excede la gama entre los 0 °C y los 45 °C. – La batería tiene un problema. En este caso, cárguela de nuevo entre las temperaturas indicadas anteriormente. Si el problema persiste, póngase en contacto con el distribuidor Sony más cercano.
Emparejamiento ¿Qué es el emparejamiento? Los dispositivos Bluetooth deben “emparejarse” previamente entre sí. Una vez que los dispositivos Bluetooth se han emparejado, no es necesario volver a hacerlo excepto en los casos siguientes: • La información de emparejamiento se elimina tras una reparación, etc. • La unidad está emparejada con 9 dispositivos o más. Esta unidad se puede emparejar hasta con 8 dispositivos; si se empareja un noveno dispositivo, éste reemplazará al más antiguo de los 8 restantes.
3 Realice el 5 Si se solicita la procedimiento de emparejamiento en el dispositivo Bluetooth para que detecte esta unidad. introducción de una contraseña* en la pantalla del dispositivo Bluetooth, introduzca “0000”. La lista de los dispositivos detectados aparecerá en la pantalla del dispositivo Bluetooth. Esta unidad se muestra como “DR-BT160AS”. Si no aparece “DR-BT160AS”, repita el procedimiento desde el paso 1. El emparejamiento finaliza cuando el indicador (azul) parpadea lentamente.
Utilización de la unidad 1 Colóquese los ganchos en ambas orejas. El auricular con el botón POWER se coloca en la oreja derecha. 2 Ajuste la banda para el cuello y el ángulo del auricular para que se adapte cómodamente. Ajuste la longitud del eje ajustable del auricular. Ajuste el ángulo del eje ajustable del auricular de forma que los auriculares se adapten cómodamente a sus orejas.
Indicaciones de la función Bluetooth B : Indicador (azul) R : Indicador (rojo) Conexión establecida Conexión Emparejamiento Estado Música – – – – – – – – – – – – – – – ... – ... B R Conexiones disponibles – – B R – – – – – – – – – ... En proceso de conexión B R – – – – – – – – – – – – – – – – – – – – ... ... HFP/HSP o A2DP B (en espera para recibir señal de audio) (en espera para recibir señal de audio) – – – – – – – – – – – – – – ...
USO DE LA UNIDAD Escuchar música VOL + Botón POWER VOL – Cuando no realice llamadas con la unidad, no deje el último dispositivo Bluetooth conectado preparado para realizar una conexión HFP o HSP. Para realizar o recibir llamadas mientras escucha música, consulte la página 20. 2 Realice la conexión Bluetooth (A2DP) desde un dispositivo Bluetooth a esta unidad. Antes utilizar la unidad, compruebe los puntos siguientes. – El dispositivo Bluetooth está encendido.
Para ajustar el volumen Presione el interruptor de desplazamiento hacia arriba o hacia abajo mientras escucha música para ajustar el volumen. Sugerencias • En función del dispositivo Bluetooth que conecte, es posible que también deba ajustar el volumen en dicho dispositivo. • El volumen para realizar llamadas y escuchar música se puede ajustar de forma independiente. Aunque modifique el volumen mientras realiza una llamada, el volumen de la reproducción de música no variará.
*1 Es posible que necesite pulsar el botón dos veces según el dispositivo Bluetooth. *2 Es posible que algunos dispositivos Bluetooth no funcionen. Sugerencia En función del dispositivo Bluetooth, puede realizar los procedimientos que se indican a continuación en la unidad para llevar a cabo las operaciones de avance o rebobinado rápido. 1 Para apagar la unidad, mantenga pulsado el botón POWER durante unos 2 segundos.
Realización de llamadas VOL + Si la unidad no se conecta a un teléfono móvil Bluetooth automáticamente Botón POWER Puede realizar una conexión utilizando el teléfono móvil Bluetooth o esta unidad para conectarse al último dispositivo Bluetooth al que se ha conectado. VOL – Botón multifunción Antes de utilizar la unidad, compruebe los puntos siguientes. – La función Bluetooth está activada en el teléfono móvil. – Ha finalizado el emparejamiento de esta unidad y el teléfono móvil Bluetooth.
B Para usar esta unidad para realizar una conexión con el último dispositivo Bluetooth al que se ha conectado 1 Pulse el botón multifunción de la unidad. Los indicadores (azul) y (rojo) empiezan a parpadear a la vez y la unidad realiza la conexión durante unos 5 segundos. Nota No es posible establecer una conexión con el botón multifunción mientras se escucha música en esta unidad. Para llamar 1 Utilice los botones del teléfono móvil para realizar llamadas.
Para finalizar una llamada HFP (Hands-free Profile) Para finalizar una llamada puede presionar el botón multifunción de la unidad.
Realización de llamadas durante la reproducción de música La conexión Bluetooth con HFP o HSP, así como con A2DP, es necesaria para realizar una llamada mientras reproduce música. Por ejemplo, para realizar una llamada con un teléfono móvil Bluetooth mientras escucha música en un reproductor de música compatible con Bluetooth, esta unidad debe estar conectada al teléfono móvil con HFP o HSP.
INFORMACIÓN COMPLEMENTARIA Precauciones Comunicación Bluetooth • La tecnología inalámbrica Bluetooth funciona en un rango de aproximadamente 10 metros. El rango máximo de comunicación puede variar en función de los obstáculos (cuerpo de una persona, objetos metálicos, paredes, etc.) o del entorno electromagnético. • La antena está incorporada en el receptáculo derecho tal y como se muestra con la línea de puntos.
• No se puede garantizar la conexión con todos los dispositivos Bluetooth. – Un dispositivo que disponga de la función Bluetooth debe cumplir el estándar Bluetooth especificado por Bluetooth SIG, Inc. y estar autenticado. – Incluso en el caso de que el dispositivo conectado cumpla el estándar Bluetooth mencionado anteriormente, es posible que algunos dispositivos no puedan conectarse o funcionar correctamente, según las características o las especificaciones del dispositivo.
Otros • No coloque esta unidad en lugares expuestos a humedad, polvo, hollín, vapor o luz solar directa, ni la deje en un automóvil en espera ante una señal de tráfico. Se pueden producir fallos de funcionamiento. • Es posible que el dispositivo Bluetooth no funcione en teléfonos móviles dependiendo del estado de las ondas de radio y del lugar donde se utilice el equipo. • Si no se siente cómodo después de utilizar el dispositivo Bluetooth, deje de utilizarlo inmediatamente.
Solución de problemas Si tiene dificultades para utilizar esta unidad, sírvase de la siguiente lista de comprobaciones y consulte la información de ayuda del producto en nuestro sitio Web. Si el problema persiste, consulte con el distribuidor Sony más cercano. Común La unidad no está encendida , Cargue la batería de la unidad. , La unidad no está encendida mientras se carga. Desenchufe la unidad del adaptador de corriente de ca y, a continuación, encienda la unidad.
Al escuchar música No hay sonido , Compruebe que tanto la unidad como el dispositivo Bluetooth están encendidos. , No se ha establecido la conexión Bluetooth A2DP entre la unidad y el dispositivo Bluetooth. Realice una conexión Bluetooth A2DP (página 14). , Compruebe que se reproduce música en el dispositivo Bluetooth. , Compruebe que el volumen de la unidad no está demasiado bajo. , Si es necesario, suba el volumen del dispositivo conectado.
Al realizar llamadas No se escucha la voz del destinatario de la llamada. , Compruebe que tanto la unidad como el teléfono móvil Bluetooth están encendidos. , Compruebe la conexión de la unidad con el teléfono móvil Bluetooth. Vuelva a realizar una conexión Bluetooth (HFP o HSP) (página 17). , Compruebe que la salida del teléfono móvil Bluetooth está ajusta para esta unidad. , Compruebe que el volumen de la unidad no está demasiado bajo.
Especificaciones Generales Sistema de comunicación Especificación Bluetooth versión 2.0 + EDR*1 Salida Clase de potencia 2 de especificación Bluetooth Rango de comunicación máximo Línea de vista de aprox.
Printed in Malaysia (1)