4-130-037-11(1) Wireless Stereo Headset Operating Instructions DR-BT100CX ©2009 Sony Corporation
WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To reduce the risk of electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. Do not expose the batteries (battery pack or batteries installed) to excessive heat such as sunshine, fire or the like for a long time. Excessive sound pressure from headphones can cause hearing loss.
Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
Table Of Contents What is Bluetooth wireless technology?............................. 6 Welcome!...................................... 7 3 steps to Bluetooth function............... 8 Location and Function of Parts.......................................... 9 Charging the unit......................10 Pairing........................................12 What is pairing?................................... 12 Procedures of pairing.......................... 12 Wearing the unit........................
What is Bluetooth wireless technology? ® Bluetooth wireless technology is a short-range wireless technology that enables wireless data communication between digital devices, such as a computer or digital camera. Bluetooth wireless technology operates within a range of about 10 metres. Connecting two devices as necessary is common, but some devices can be connected to multiple devices at the same time.
Welcome! Thank you for purchasing this Sony Wireless Stereo Headset. This unit uses Bluetooth wireless technology. Enjoy music wirelessly from Bluetooth Stereo-enabled music players and mobile phones.*1 Embedded microphone enables hands-free conversation from Bluetoothenabled mobile phone.*2 Enjoy basic remote control operation (play, stop, etc.) of music player functions via Bluetooth connection.*3 Bluetooth version 2.
3 steps to Bluetooth function Pairing First, register (“pair”) a Bluetooth device (mobile phone, etc.) and this unit with each other. Once pairing is established, there is no need for pairing again. Bluetooth mobile phone, etc. Wireless Stereo Headset Pairing Page 12–13 Listening to music Bluetooth connection Operate the Bluetooth device to make the Bluetooth connection.
GETTING STARTED Location and Function of Parts Headphones Microphone RESET button POWER button USB() jack PAIRING button Cord slider Multi function button Controls various call functions. Clip Indicator (blue) (red) Indicate the communication status (blue) or power status (red) of the unit. Jog switch Controls various functions when listening to music. Adjust the volume of this unit when talking over the telephone.
Charging the unit The unit contains a rechargeable Lithium-Ion battery, which should be charged before using for the first time. 1 Open the cover of the USB () jack. 2 Connect the supplied USB () cable to the unit, and then connect the other end to a computer. When connecting, insert the connector with facing down. Tips If the USB cable is connected to a computer while the unit is turned on, the unit will be turned off automatically.
Caution If this unit detects a problem while charging, the indicator (red) may turn off, although charging is not complete. Check for the following causes: – Ambient temperature exceeds the range of 0 °C – 40 °C. – There is a problem with the battery. In this case, charge again within the above-mentioned temperature range. If the problem persists, consult your nearest Sony dealer.
Pairing What is pairing? Bluetooth devices need to be “paired” with each other beforehand. Once Bluetooth devices are paired, there is no need for pairing again, except in the following cases: Pairing information is deleted after repair, etc. This unit is paired with 9 or more devices. This unit can be paired with up to 8 devices; if a new device is paired after 8 devices have been paired, the device whose latest connection time is the oldest among the 8 paired devices is replaced by the new one.
3 Perform pairing procedure on the Bluetooth device to detect this unit. The list of detected devices appears on the display of the Bluetooth device. This unit is displayed as “DR-BT100CX.” If “DR-BT100CX” is not displayed, repeat from step 1. Notes For details, refer to the operating instructions supplied with the Bluetooth device.
Wearing the unit To use the clip 1 Clip this unit to a pocket, etc., of your clothes and then wear the headphones. Wear the earphone marked in your left ear, and the one marked in your right ear. Tip Move the cord slider to change the split position of the cord, to prevent the headphones coming apart when the unit is not in use. 14 How to install the earbuds correctly If the earbuds do not fit your ears correctly, low-bass sound may not be heard.
Indications of Bluetooth function : Indicator (blue) : Indicator (red) Connecting Pairing Status Searching Flashing patterns — Connectable — — — — — — — — — —— —— —— — — — — —… … —— … — — — — —— — Connecting — —… Phone Music Connected — HFP/HSP or A2DP (standby for receiving audio signal) HFP/HSP and A2DP (standby for receiving audio signal) Listening ————————— —————… — — — ——————— ———… — ———————— ————… ——————— ———… — Listening d
OPERATING THE UNIT Listening to music Note After the unit is turned on, the unit attempts to connect to the last connected Bluetooth device automatically with HFP or HSP. When not calling with this unit, do not make the last connected Bluetooth device ready for HFP or HSP connection. To make or receive a call while playing back music, see page 22. Jog switch 2 POWER button This unit supports SCMS-T content protection. You can enjoy music, etc.
To adjust the volume Push the jog switch up or down while listening to music to adjust the volume. Tips Depending on the connected device, it may be necessary to adjust the volume on the connected device as well. Volume for calling and listening to music can be adjusted independently. Even if you change the volume while calling, the volume for music playback does not change. To stop use 1 2 Terminate the Bluetooth connection by operating the Bluetooth device.
Tip Depending on the Bluetooth device, the fastforward or fast-rewind operation can be done by performing the following procedures on this unit. 1 Press and hold the POWER button for about 2 seconds to turn off the unit. 2 Press and hold the POWER button and jog switch () for about 7 seconds. The indicator (blue) flashes once. The setting can be released by repeating the above procedures. At this time, the indicator (blue) flashes twice.
Calling When this unit does not connect to a Bluetooth mobile phone automatically Jog switch You can make a connection by operating Bluetooth mobile phone or by operating this unit to connect the last connected Bluetooth device. POWER button Multi function button Check the following before operating the unit. – The Bluetooth function is active on the mobile phone. – Pairing of this unit and the Bluetooth mobile phone is complete.
– ring tone set on the unit – ring tone set on the mobile phone – ring tone set on the mobile phone only for Bluetooth connection To make a connection with the last connected Bluetooth device by operating this unit 1 Press the multi function button. The indicator (blue) starts flashing, and the unit performs the connection operation for about 5 seconds. Note If you received a call by pressing the button on the Bluetooth mobile phone, some Bluetooth mobile phones may have handset use priority.
Controlling the Bluetooth mobile phone – HFP, HSP The operation of the buttons on this unit varies depending on your mobile phone. HFP (Hands-free Profile) or HSP (Headset Profile) is used for Bluetooth mobile phone. Refer to the operating instructions supplied with your Bluetooth mobile phone on supported Bluetooth profiles or how to operate. *1 Some functions may not be supported depending on the Bluetooth mobile phone. Refer to the operating instructions supplied with your mobile phone.
Calling while playing back music The Bluetooth connection using HFP or HSP as well as A2DP is necessary to make a call while playing back music. For example, to make a call using a Bluetooth mobile phone while listening to music on a Bluetooth compatible music player, this unit needs to be connected to the mobile phone using HFP or HSP. Make a Bluetooth connection between this unit and the device in use following the procedures outlined below.
ADDITIONAL INFORMATION Precautions On Bluetooth communication Bluetooth wireless technology operates within a range of about 10 metres. Maximum communication range may vary depending on obstacles (human body, metal, wall, etc.) or electromagnetic environment. The aerial is built into the unit as illustrated in the dotted line. The sensitivity of the Bluetooth communication will improve by turning the direction of the built-in aerial to the connected Bluetooth device.
Note on static electricity In particularly dry air conditions, mild tingling may be felt on your ears. This is a result of static electricity accumulated in the body, and not a malfunction of the headphones. The effect can be minimized by wearing clothes made from natural materials. Others Do not place this unit in a place exposed to humidity, dust, soot or steam, subject to direct sunlight, or in a car waiting at a traffic signal. It may cause a malfunction.
Troubleshooting If you run into any problems using this unit, use the following checklist and read the product support information on our website. Should any problem persist, consult your nearest Sony dealer. Common The unit is not turned on. Charge the battery of the unit. The unit cannot be turned on while charging. Remove the USB cable from the unit, and then turn on the power. Pairing cannot be done. Bring this unit and the Bluetooth device closer together.
When charging Charging cannot be done. Check that the unit and the computer are firmly connected by the USB cable. Check that the computer is turned on. Check that the computer is not in standby, sleep or hibernation mode. Charging time is too long. Check that the unit and the computer are directly connected, not via a USB hub. The unit cannot be recognized by a computer. The USB cable is not connected properly to the USB port of the computer. Connect the USB cable again.
When calling The recipient’s voice cannot be heard. Check that both this unit and the Bluetooth mobile phone are turned on. Check the connection between this unit and the Bluetooth mobile phone. Make a Bluetooth connection (HFP or HSP) again (page 19). Check that output of the Bluetooth mobile phone is set for this unit. Check that the volume of the unit is not set too low. Turn up the volume on the connected Bluetooth mobile phone if necessary.
Specifications General Communication System Bluetooth Specification version 2.1 + EDR (Enhanced Data Rate) Output Bluetooth Specification Power Class 2 Maximum communication range Line of sight approx. 10 m*1 Frequency band 2.4 GHz band (2.4000 GHz – 2.
Headset Power source DC 3.7 V: Built-in lithium-ion rechargeable battery Dimension (w/h/d) (excluding projection parts and controls) Approx. 19.5 × 74.0 × 17.5 mm Cord (from unit to earpiece) Approx. 0.6 m Mass Approx. 26 g (including headphones: 4g) Rated power consumption 1.
Printed in Thailand
