Home Theatre System Startup Guide HT-A9 5-025-231-11(1)
What’s in the box Control box (1) AC adaptor (1) Remote control (1) / R03 (size AAA) battery (2) Front left speaker (1) Front right speaker (1) Rear left speaker (1) Rear right speaker (1) FL FR RL RR AC power cord (mains lead) for speakers (4) HDMI cable* (1) Home Theatre System Home Theatre System Startup Guide Operating Instructions Startup Guide (this document) * Supports the transmission of 4K/8K content.
1 Choose an installation method Installing on a shelf/stand Mounting on a wall FR FR FL RR FL RL or RR RL For details, refer to the Operating Instructions (separate document). • Do not place the speakers in a shelf or right below the ceiling so as not to block the sound output from the top of the speakers. • Do not place metal objects near the speaker system. Wireless functions may become unstable.
2 Choose an installation position Bottom of the speaker TV Front left speaker FL FR Front right speaker Control box FR FR Rear left speaker Rear right speaker RL RR ̽ Install the control box on or in a shelf where the front panel display is not covered. ̾ Choose the installation position of the speakers by checking the labels on the bottom of the speakers.
3 Connect a TV and another device Blu-ray Disc™ player, set-top box, gaming console, etc. S-CENTER OUT HDMI cable (supplied) HDMI OUT HDMI IN TV HDMI cable (not supplied) ARC/ eARC : Video signal : Audio signal ̽ Connect the HDMI cable (supplied) to the HDMI OUT jack on the control box and the HDMI IN jack labeled “eARC” or “ARC” on your TV.
4 Connect the control box, then the speakers to the AC outlet (mains) HDMI IN 12V AC adaptor (supplied) AC power cord (mains lead) (supplied) ̽ Connect the AC adaptor (supplied) to the control box, and then to the AC outlet (mains). ̾ Connect the AC power cords (supplied) to the speakers and then to the AC outlets.
6 Turn on the control box, then the TV Speaker connection check Speaker connection check Speaker connection successful. Next Power ON PLEASE WAIT SETUP Æ ̽ Press the Æ (power) button on the remote control of the speaker system to turn on the control box. The speaker system turns on and [SETUP] appears in the front panel display of the control box. ̾ Turn on the TV.
7 Perform Initial Settings Language Sound Field Optimization Language Sound Field Optimization Easy Network Setup - Start Easy Network Setup - Start Optimize the surround sound for your environment. English Français (France) Français (Canada) Select your language. Optimization takes about a minute. A loud sound may come from your speakers during optimization. Do not make loud noises, walk or stand in front of the speakers during optimization.
8 Listen to sound INPUT TV input switch Listen to TV Audio 0 Select the desired input to the TV using the TV remote control. The screen switches to the selected input screen and TV audio is output from the speaker system. If [TV] does not appear in the front panel display of the control box, press TV on the remote control of the speaker system to select the TV input. [TV] appears in the front panel display of the control box.
Home Theatre System Système Home Cinema HT-A9 Operating Instructions US Mode d’emploi FR Manual de instrucciones ES
Owner’s Record The model and serial numbers are located on the bottom of the control box. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding the speaker system. Model No. HT-A9 Serial No. WARNING To reduce the risk of fire or electric shock, do not expose this speaker system to rain or moisture.
in a residential installation. This speaker system generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
For customers in Canada Properly shielded and grounded cables and connectors must be used for connection to host computers and/or peripherals. This speaker system contains licenseexempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s).
in a residential installation. This speaker system generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
For customers in Canada Properly shielded and grounded cables and connectors must be used for connection to host computers and/or peripherals. This speaker system contains licenseexempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s).
Table of Contents About Manuals of the Speaker System ......................................7 Startup Guide What’s in the Box (separate document) What You Can Do with the Speaker System ..................................... 8 Guide to Parts and Controls .........10 Using the Home Menu ................. 14 Setting Up Installing the Speaker System ...... 15 Connecting to a TV ....................... 16 When Your TV Has the S-CENTER SPEAKER IN Jack ..................... 17 Connecting an AV Device ..........
Troubleshooting Troubleshooting .......................... 47 Resetting the Speaker System .... 55 Additional Information Specifications ................................57 Supported Input Audio Formats .................................. 60 On BLUETOOTH Communication ......................61 END USER LICENSE AGREEMENT ........................... 62 Precautions .................................. 66 Copyrights and Trademarks ........ 68 Index ............................................
Help Guide (Web manual) About Manuals of the Speaker System The information included in each manual is as shown below. Startup Guide Home Theatre System Startup Guide Introduces the initial procedures concerning installation and connection for using the speaker system, and operations until you play music. Operating Instructions (this document) For customers in Americas https://rd1.sony.net/ help/ht/a9/h_uc/ For customers in other countries/ regions https://rd1.sony.
What You Can Do with the Speaker System The speaker system supports object-based audio formats such as Dolby Atmos and DTS:X as well as HDR video formats such as HDR10, HLG, and Dolby Vision. TV Blu-ray Disc™ player, set-top box, gaming console, etc.
Network Wireless LAN router Internet “What You Can Do by Connecting the Speaker System to a Network” (page 32) For the connecting method to the network and functions enabled with the network connection, refer to Help Guide (Web manual). For customers in Americas https://rd1.sony.net/help/ht/a9/h_uc/ For customers in other countries/regions https://rd1.sony.net/help/ht/a9/h_zz/ Optional subwoofer For the operations of the optional subwoofer, refer to its operating instructions.
Guide to Parts and Controls Control Box Front Remote control sensor Point the remote control at the remote control sensor to operate the speaker system. Front panel display UPDATE port (page 46) Connect the USB memory when updating the speaker system. S-CENTER OUT jack (page 17) (power) button Turns on the speaker system or sets it to standby mode. LAN(100) port 10US Rear HDMI OUT (TV ARC/eARC) jack Connect a TV that has an HDMI input jack with an HDMI cable.
Speakers Rear Front Bottom Power indicator Displays the connecting status between the control box and speaker as well as the power condition of the speaker. Red – Lights up: The speaker is in standby mode. Green – Lights up: The speaker is connected to the control box. – Flashes slowly: The speaker is attempting to connect to the control box. – Flashes twice repeatedly: The speaker is in the pairing standby status via manual connection. Turns off – The speaker is turned off.
Remote Control (power) Turns on the speaker system or sets it to standby mode. (MUSIC SERVICE) button If you have previously played music on Spotify on the speaker system, you can resume playback by pressing this button. This button may not be available in some countries/regions.
REAR (rear speakers volume) +/– Adjusts the volume of the rear speakers. (volume) +*/– Adjusts the volume. BASS (bass sound volume) +/– Adjusts the volume of the bass sound or optional subwoofer when connecting it. About the replacement of batteries for the remote control When the speaker system does not respond by operating with the remote control, replace two batteries with new batteries. Use R03 (size AAA) manganese batteries for replacement. (muting) Turns off the sound temporarily.
Using the Home Menu You can display the home menu on the TV screen by connecting the speaker system and TV with an HDMI cable. ///, (enter) HOME BACK 1 Press HOME. The home menu appears on the TV screen. 2 Press // to select the category that you want, then press or (enter). The items for the selected category appear under the category list on the TV screen.
1 Setting Up Prepare screws (not supplied) that are suitable for the wall mounting hole on the rear of the speaker. Installing the Speaker System 4 mm (5/32 in) More than 30 mm (1 3/16 in) Installing the Control Box and Speakers 4.2 mm (11/64 in) For the installation, refer to Startup Guide (separate document). 9.6 mm (3/8 in) Hole on the rear of the speaker Mounting the Speakers on a Wall 2 Fasten the screw in the wall. Speakers Approx. 7.35 mm (approx.
4 Hang the speakers by confirming the type of the speakers. Check the label on the bottom of the speaker. • “FL”: Front left • “FR”: Front right • “RL”: Rear left • “RR”: Rear right. Connecting to a TV Connecting a TV Compatible with ARC/eARC 1 Connect the HDMI IN jack compatible with ARC/eARC on the TV and HDMI OUT (TV ARC/eARC) jack on the speaker system with the HDMI cable (supplied). Note Keep the cover that is peeled off in step 3 for use when you do not mount the speaker on a wall.
When Your TV Has the SCENTER SPEAKER IN Jack You can output the center part of the speaker system sound from the TV by connecting the TV with the following method. 1 2 Note Make sure that the connectors are firmly inserted. Tip If the length of the TV center speaker mode cable is not sufficient, use a commercially available stereo mini cable. Connect the speaker system and TV with the HDMI cable (supplied) (page 16).
Tips Connecting an AV Device Connecting an AV Device Compatible with the 2K/4K Video Format You can output sound such as Dolby Atmos, Dolby TrueHD, and DTS:X in high quality by connecting an AV device to the speaker system. 1 Connect the HDMI OUT jack on the AV device and HDMI IN jack on the speaker system with an HDMI cable (not supplied). • If a TV is compatible with eARC, you can also output the high quality sound by connecting an AV device to the HDMI IN jack on the TV.
When the eARC compatible HDMI IN jack on the TV supports the 8K video input: When the eARC compatible HDMI IN jack on the TV does not support the 8K video input: Connect the HDMI IN jack on the speaker system and HDMI OUT jack on an AV device with an HDMI cable (not supplied). Connect the HDMI OUT jack on an AV device to the HDMI IN jack compatible with the 8K video input on a TV with an HDMI cable (not supplied). Make sure that the eARC function of the TV is on.
Connecting to the AC Outlet (mains) 1 2 Connect the AC power cords (mains leads) (supplied) to the AC inlets on four speakers, then connect to the AC outlets (mains). Connect the AC adaptor (supplied) and AC power cord (mains lead) (supplied)* to the DC IN terminal of the control box, then connect to the AC outlet (mains).
The sound for connection completion is output after the check marks appear on all the speakers. The power indicator of the speaker lights in green when connecting to the control box. Performing Initial Settings 1 Press (power) on the remote control supplied with the speaker system to turn on the speaker system. Operate the remote control by pointing it toward the front of the control box. When the speaker system turns on, [SETUP] appears in the front panel display.
Notes • Depending on the order in which you turn on the TV and the speaker system, the speaker system may be muted and [MUTING] is displayed on the front panel display of the speaker system. If this happens, turn all devices off, then turn on the speaker system after turning on the TV. • During [Sound Field Optimization], a measuring sound is output for about 1 minute. • The speaker system does not output sound until completing the wireless connection between the control box and four speakers.
4 5 6 7 Press LINK on all the speakers. The power indicators of the speakers flash twice repeatedly in green. Select [Start]. The manual connection starts. The connecting process appears on the TV screen. To cancel the manual connection, select [Cancel]. When all the speakers display [Connected], select [Finish]. Press (enter). The manual connection is established and the power indicators of the speakers light in green.
Watching Images Watching TV 1 2 3 4 Press HOME. The home menu appears on the TV screen. 1 2 Select [Watch] - [TV] on the home menu. Select the program using the TV remote control. The selected TV program appears on the TV screen and the TV sound is output from the speaker system. Adjust the volume (page 34). Tip You can select [TV] directly by pressing TV on the remote control. 24US Playing the Connected AV Device 3 Press HOME. The home menu appears on the TV screen.
Listening to Music/Sound Listening to Sony TV Sound with the BLUETOOTH® Function What You Can Do by Connecting a TV with the BLUETOOTH Function Listening to TV Sound by Connecting the Speaker System and TV Wirelessly You need to perform pairing of the speaker system and TV by using the BLUETOOTH function. Pairing is the process required to mutually register the information on BLUETOOTH devices to be connected wirelessly in advance.
5 6 7 8 9 On the TV, search the speaker system by performing the pairing operation. The list of the BLUETOOTH devices that are detected appears on the TV screen. For the operation method to pair the BLUETOOTH device to the TV, refer to the operating instructions of the TV. Listening to Sound of the Paired TV 1 Pair the speaker system and TV by selecting “HT-A9” from the list on the TV screen. Make sure that [TV (BT)] appears in the front panel display.
About operations with the remote control that is supplied with the speaker system You can use the following buttons. Listening to Music/Sound with the BLUETOOTH Function (power) AUTO SOUND, VOICE, NIGHT, CINEMA, MUSIC, STANDARD, IMMERSIVE AE Listening to Music by Pairing the Mobile Device That Is Connected for the First Time To use the BLUETOOTH function, you need to perform pairing of the speaker system and mobile device in advance.
2 Make sure that [PAIRING] appears in the front panel display. The speaker system enters the pairing mode. PAIRING 3 4 5 6 7 Listening to Music from the Paired Device BLUETOOTH On the mobile device, search the speaker system by performing the pairing operation. The list of the BLUETOOTH devices that are detected appears on the screen of the mobile device. For the operation method to pair the BLUETOOTH device to the mobile device, refer to the operating instructions of the mobile device.
5 Adjust the volume (page 34). You can play or pause the content by using the playback operation buttons on the remote control. Note If sound delay occurs, it may be improved by setting [Setup] - [Advanced Settings] - [Bluetooth Settings] - [Bluetooth Connection Quality] to [Priority on Stable Connection]. Tip Listening to Sound of the Connected TV or Device Using Headphones Listening to Sound by Pairing with Headphones 1 When the connection is not established, select “HT-A9” on the mobile device.
7 Adjust the volume. Adjust the volume level of the headphones first. Then, adjust the volume level of the headphones with (volume) +/– on the remote control. To remove the paired headphones from the device list 1 Press HOME. The home menu appears on the TV screen. 2 Select [Setup] - [Advanced Settings] on the home menu. 3 Select [Bluetooth Settings] - [Device List]. 4 Move the cursor to the name of the headphones that you want to remove, and then press DISPLAY.
To disconnect the paired headphones Perform any of the following items. – Disable the BLUETOOTH function on the headphones. – Set [Setup] - [Advanced Settings] [Bluetooth Settings] - [Bluetooth Mode] to [Receiver] or [Off]. – Turn off the speaker system or headphones. – Select the device name of the connected headphones from [Setup] - [Advanced Settings] [Bluetooth Settings] - [Device List]. [Connected] of the device name disappears.
Listening to Music by Connecting to a Network What You Can Do by Connecting the Speaker System to a Network You can perform streaming playback of music content via the speaker system by operating a smartphone, tablet, or iOS device, or play music stored on a computer via the speaker system by connecting to the network. For details of functions and operations, refer to Help Guide.
Sony | Music Center You can control the speaker system wirelessly by installing the “Sony | Music Center” app on your smartphone or tablet device. Home Network You can play music files stored on your computer on a network location via your home network.
Adjusting the Volume and Sound Quality Adjusting the Volume (volume) +/– BASS +/– REAR (rear speakers volume) +/– To adjust the speaker system volume Press (volume) +/–. The volume level appears in the front panel display. To adjust the bass sound volume Press BASS (bass sound volume) +/–. The volume level appears in the front panel display. Note The subwoofer is designed for playback of bass or low frequency sound.
Enjoying Immersive Surround Experience (IMMERSIVE AE) You can feel immersed by the sound from not only the horizontal direction, but also from the upward direction by working sound modes effectively (page 36). This function also works for the 2.0 channel signal such as TV programs. • The Immersive Audio Enhancement setting does not appear on the TV screen while the TV input is selected. In this case, you can check the Immersive Audio Enhancement setting in the front panel display.
Setting the Sound Effect That Is Tailored to Sound Sources (Sound Mode) You can easily enjoy pre-programmed sound effects that are tailored to different kinds of sound sources. This function works when [Setup] [Advanced Settings] - [Audio Settings] [Sound Effect] is set to [Sound Mode On]. AUTO SOUND MUSIC STANDARD CINEMA 1 36US Press AUTO SOUND, CINEMA, MUSIC, or STANDARD to select the sound mode. The selected sound mode appears on the TV screen.
Making Dialogs Clearer (VOICE) Enjoying Clear Sound with Low Volume at Midnight (NIGHT) VOICE NIGHT 1 Press VOICE to set the function on or off. The voice mode setting appears on the TV screen. Mode Explanation [Voice: On] Dialog is easily heard by enhancing dialog range. [Voice: Off] 1 Press NIGHT to set the function on or off. The night mode setting appears on the TV screen. Mode Explanation [Night: On] Sound is output at low volume with minimum loss of fidelity and clarity of dialog.
Adjusting the Delay Between the Picture and Sound When the sound does not match the pictures on the TV screen, you can adjust the delay between the picture and sound. The setting method differs depending on the input. For details, refer to Help Guide. Enjoying Multiplex Broadcast Sound (AUDIO) You can enjoy multiplex broadcast sound when the speaker system receives a Dolby Digital multiplex broadcast signal. AUDIO 1 Press AUDIO repeatedly to select the desired audio signal.
Adjusting the Dialog Volume While the DTS:X Content is Played Back By adjusting the dialog volume, you can easily listen to dialog since it stands out from the ambient noise. This function works while playing content that is compatible with the DTS:X dialog control function. The setting method differs depending on the input. When Playing Content on an AV Device 1 2 3 Press OPTIONS. The options menu appears on the TV screen. Select [DTS Dialog Control].
Using the Speaker System by Interlocking with a TV Operating the Speaker System by Interlocking with a TV (Control for HDMI Function) Connecting a TV compatible with the Control for HDMI function using an HDMI cable enables you to interlock the speaker system operation such as power on/off or volume adjustment with a TV. • If you enable the Control for HDMI (“BRAVIA” sync) function when using a TV manufactured by Sony, the Control for HDMI function of the speaker system is also enabled automatically.
Volume adjustment The sound of the TV you are watching is output from the speaker system automatically. You can adjust the speaker system volume by the TV remote control. Other Interlocking Functions Menu Operation by TV Remote Control Operating the Speaker System by Interlocking with a TV Compatible with the “BRAVIA” Sync Function You can operate the menu of the speaker system by selecting the name of the speaker system when changing input or operating the Sync Menu on the TV.
Home Theatre Control Function Setting the speaker system, setting the sound mode settings, input switching, etc. can be done without switching the TV input.
Changing the Settings Changing the Brightness of the Front Panel Display and Indicators (DIMMER) about 10 seconds. However, in some cases, the front panel display and indicators may not turn off. In this case, the brightness of the front panel display and indicators are the same as [Dimmer: Dark]. • The display mode does not appear on the TV screen while the TV input is selected. In this case, you can check the display mode in the front panel display.
Saving Power in Standby Mode Check that you have made the following settings: – [Setup] - [Advanced Settings] [HDMI Settings] - [Standby Through] is set to [Off]. – [Setup] - [Advanced Settings] [System Settings] - [Network/ Bluetooth Standby] is set to [Off]. Performing Easy Setup You can make basic initial settings, speaker settings, and network settings for the speaker system easily by performing Easy Setup. 1 2 3 4 44US Press HOME. The home menu appears on the TV screen.
Performing Advanced Settings Using the [Advanced Settings] Menu You can make various adjustments to items such as picture and sound on the [Advanced Settings] menu. 1 2 3 Press HOME. The home menu appears on the TV screen. Select [Setup] - [Advanced Settings] on the home menu. The [Advanced Settings] screen appears on the TV screen. Select the setting item. For details about the setting items, refer to Help Guide.
Updating the Software By updating your software to the latest version, you can take advantage of the newest functions. For information about update functions, visit the following website: • For customers in Americas https://www.sony.com/am/support • For customers in Europe https://www.sony.eu/support • For customers in Asia-Pacific, Oceania, Middle East, and Africa https://www.sony-asia.com/support Notes • It may take up to 20 minutes for the update to be completed.
2 Troubleshooting Troubleshooting If the speaker system does not work properly, handle it in the following order. 1 Search for the cause and solution of the issue on the Sony support site. Sony support site provides latest support information and Frequently Asked Questions. • For customers in Americas https://www.sony.com/am/ support • For customers in Europe https://www.sony.eu/support Search for the cause and solution of the issue by referring to these Operating Instructions or Help Guide.
Power The speaker system does not power up. Check that the AC power cord (mains lead) is connected securely. Disconnect the AC power cord (mains lead) from the wall outlet (mains), and then reconnect after several minutes. The speaker system does not turn on even when the TV is turned on. Set [Setup] - [Advanced Settings] - [HDMI Settings] - [Control for HDMI] to [On]. The TV must support the Control for HDMI function (page 40). For details, refer to the operating instructions of your TV.
box, or install the control box far away from the TV/other wireless devices. There is an interference of the frequency band between the wireless LAN and the wireless connection of the speakers. Switch the band of the wireless LAN connection of the TV or device that is playing an image to 2.4 GHz. 3D content from the HDMI IN jack does not appear on the TV screen. Depending on the TV or video device, 3D content may not appear. Check the supported HDMI video format. For details, refer to Help Guide.
indicator on the speaker lights in green. – Connect the speaker and control box manually (page 22). – Check the status of the wireless connection in [Setup] [Advanced Settings] - [Speaker Settings] - [Wireless Speaker Settings] - [Check wireless connection]. It may take about 1 minute until the sound is output if [Setup] [Advanced Settings] - [Speaker Settings] - [Wireless Speaker Settings] - [RF Channel] is switched from [Off] to [On].
connection of the peripheral device to the wired LAN. The control box and speakers are installed too far away from each other. Bring them closer together. If there is any obstacle between the control box and speakers, remove it or move the control box and speakers away from the obstacle. Do not install the control box in the inner position of a shelf. Install the control box in or on a shelf so that the front panel display is not hidden.
Press or (volume) + on the remote control to cancel the muting function (page 12). Make sure the input source is selected correctly. You should try other input sources by pressing the input select button on the remote control (TV/ HDMI/BLUETOOTH). Make sure that the connectors are firmly inserted. When you play content compatible with copyright protection technology (HDCP), sound may not be output from the speaker system.
Make sure this speaker system is not receiving interference from a wireless LAN device, other 2.4 GHz wireless devices, or a microwave oven. If a device that generates electromagnetic radiation is nearby, move the device away from this speaker system. BLUETOOTH connection cannot be completed. Make sure that [BT] appears in the front panel display (page 27). Make sure the BLUETOOTH device to be connected with is turned on and the BLUETOOTH function is enabled.
wireless LAN device, other BLUETOOTH devices, or a microwave oven is nearby, move the device away from this speaker system. Remove any obstacle between this speaker system and the BLUETOOTH headphones, or move this speaker system away from the obstacle. Reposition the connected BLUETOOTH headphones. Switch the wireless LAN frequency of any nearby wireless LAN router or PC to the 5 GHz range. Increase the volume on the connected BLUETOOTH headphones.
[HIGH], [TEMP], and [ERROR] appear alternately for 2 seconds each in the front panel display, [STANDBY] appears in the front panel display, then the speaker system is turned off. High-temperature is detected in the speaker system. Press (power) to restart the speaker system. [BT TX] appears in the front panel display. Set [Setup] - [Advanced Settings] - [Bluetooth Settings] - [Bluetooth Mode] to [Receiver]. [BT TX] appears in the front panel display if [Bluetooth Mode] is set to [Transmitter].
Resetting the Speakers 1 56US Press and hold (power) on the bottom of the speaker for more than 10 seconds. The power indicator of the speaker flashes slowly in red and resetting starts. The power indicator of the speaker flashes in green and orange alternately when resetting is completed. When resetting is completed, disconnect the AC power cord (mains lead), then connect the AC power cord (mains lead) after the power indicator turns off.
Tweeter: 42 W (at 6 ohms, 10 kHz) Woofer: 42 W (at 6 ohms, 100 Hz) Additional Information Specifications Speakers (SA-FLA9/SAFRA9/SA-RLA9/SA-RRA9) The following descriptions are the specifications per speaker. Amplifier section U.S. models: POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (FTC) Top speaker: With 6 ohms loads, both channels driven, from 200 - 10k Hz; rated 30 W per channel minimum RMS power, with no more than 1% total harmonic distortion from 250 mW to rated output.
USB section (For update use only) (USB) port: Type A (For connecting USB memory) LAN section LAN(100) terminal 100BASE-TX Terminal Wireless LAN section Communication system IEEE 802.11 a/b/g/n/ac Frequency band 2.4 GHz, 5 GHz BLUETOOTH section Communication system BLUETOOTH Specification version 5.0 Output BLUETOOTH Specification Power Class 1 Maximum communication range Line of sight approx. 30 m1) Maximum number of devices to be registered 9 devices Frequency band 2.4 GHz band (2.4000 GHz 2.
Supplied Accessories • Remote control (1) • R03 (size AAA) battery (2) • HDMI cable (4K, 8K transmission supported) (1) • TV center speaker mode cable (1) • AC adaptor (1) • AC power cord (mains lead) for the speaker (4) • Startup Guide • Operating Instructions (this document) Design and specifications are subject to change without notice.
Supported Input Audio Formats Supported audio formats differ depending on the input setting of the speaker system. “” indicates the supported audio format and “–” indicates the unsupported audio format in the table below. Format HDMI input TV input (eARC) TV input (ARC) LPCM 2ch LPCM 5.1ch – LPCM 7.
On BLUETOOTH Communication • BLUETOOTH devices should be used within approximately 10 meters (33 feet) (unobstructed distance) of each other. The effective communication range may become shorter under the following conditions.
COPYRIGHT END USER LICENSE AGREEMENT IMPORTANT: BEFORE USING THE SOFTWARE, PLEASE READ THIS END USER LICENSE AGREEMENT (“EULA”) CAREFULLY. BY USING THE SOFTWARE YOU ARE ACCEPTING THE TERMS OF THIS EULA. IF YOU DO NOT ACCEPT THE TERMS OF THIS EULA, YOU MAY NOT USE THE SOFTWARE. This EULA is a legal agreement between you and Sony Electronics Inc. (“SONY”).
The software, network services or other products other than SOFTWARE upon which the SOFTWARE’S performance depends might be interrupted or discontinued at the discretion of the suppliers (software suppliers, service suppliers, or SONY). SONY and such suppliers do not warrant that the SOFTWARE, network services, contents or other products will continue to be available, or will operate without interruption or modification.
the SOFTWARE could lead to death, personal injury, or severe physical or environmental damage (“HIGH RISK ACTIVITIES”). SONY, each of the THIRDPARTY SUPPLIERS, and each of their respective affiliates specifically disclaim any express or implied warranty, duty or condition of fitness for HIGH RISK ACTIVITIES. EXCLUSION OF WARRANTY ON SOFTWARE You acknowledge and agree that use of the SOFTWARE is at your sole risk and that you are responsible for use of the SOFTWARE.
AUTOMATIC UPDATE FEATURE From time to time, SONY or the THIRDPARTY SUPPLIERS may automatically update or otherwise modify the SOFTWARE, including, but not limited to, for purposes of enhancement of security functions, error correction and improvement of functions, at such time as you interact with SONY’s or third parties’ servers, or otherwise.
UPGRADES/UPDATES OR BY ANY OTHER LEGALLY RECOGNIZABLE FORM OF NOTICE. If you do not agree to the amendment, you should promptly contact SONY for instructions. Your continued use of the SOFTWARE after the effective date of any such notice shall be deemed your agreement to be bound by such amendment. THIRD-PARTY BENEFICIARIES Each THIRD-PARTY SUPPLIER is an express intended third-party beneficiary of, and shall have the right to enforce, each provision of this EULA with respect to the SOFTWARE of such party.
• Do not place metal objects other than a TV around the speaker system. Wireless functions may be unstable. • If the speaker system is being used in combination with a TV, VCR, or tape deck, noise may result and picture quality may suffer. In such a case, place the speaker system away from the TV, VCR, or tape deck. • Use caution when placing the speaker system on a surface that has been specially treated (with wax, oil, polish, etc.), as staining or discoloration of the surface may result.
Copyrights and Trademarks This speaker system incorporates Dolby* Digital and the DTS** Digital Surround System. * Manufactured under license from Dolby Laboratories. Dolby, Dolby Vision, Dolby Atmos, and the double-D symbol are registered trademarks of Dolby Laboratories Licensing Corporation. Confidential unpublished works. Copyright © 2012–2020 Dolby Laboratories. All rights reserved. **For DTS patents, see http:// patents.dts.com. Manufactured under license from DTS, Inc.
48 kHz) or 909 kbps (88.2/44.1 kHz) is selected All other trademarks are trademarks of their respective owners. This product contains software that is subject to the GNU General Public License (“GPL”) or GNU Lesser General Public License (“LGPL”). These establish that customers have the right to acquire, modify, and redistribute the source code of said software in accordance with the terms of the GPL or the LGPL.
Index Buttons R AUDIO 38 BLUETOOTH 27 DIMMER 43 IMMERSIVE AE 35 NIGHT 37 VOICE 37 Remote control 12 Resetting 55 A ARC 10 Audio format 60 Audio Return Channel 10 B BLUETOOTH Function 27 Pairing 27 “BRAVIA” Sync 41 C Connection (See “Wired connection” or “Wireless connection” in “Index”) Control for HDMI 40 D DTS Dialog control 39 E eARC 10 Easy Setup 44 Enhanced Audio Return Channel 10 I Immersive Audio Enhancement 35 Initial settings 44 Installation 15 M Multiplex broadcast sound 38 N Night mode
The software of this system may be updated in the future. To find out details on any available updates, please visit the following URL. https://www.sony.com/am/support Le logiciel de ce système est susceptible d’être mis à jour. Pour en savoir plus sur les éventuelles mises à jour disponibles, visitez l’URL suivante. https://www.sony.com/am/support El software de este sistema podría actualizarse en el futuro. Para obtener más información sobre las actualizaciones disponibles, visite la siguiente URL.
Help Guide Home Theatre System HT-A9 Use this Help Guide when you have any questions on how to use the speaker system.
Connecting to a TV Connecting a TV Compatible with ARC/eARC When Your TV Has the S-CENTER SPEAKER IN Jack Connecting an AV Device Connecting an AV Device Compatible with the 2K/4K Video Format Connecting an AV Device Compatible with the 8K Video Format Connecting to the AC Outlet (mains) Performing Initial Settings If the Speakers Are not Connected Correctly Watching Images Watching TV Playing the Connected AV Device Listening to Music/Sound Listening to Sony TV Sound with the BLUETOOTH® Function What Y
Setting up a Wi-Fi Connection Using an iOS Device Connecting to a Wired Network Connecting to a PC or Router with a LAN Cable Setting up a Wired Connection Enjoying 360 Reality Audio Using Spotify Streaming Music with Chromecast built-in Operating the Speaker System by Talking to an Alexa Built-in Device Streaming Music with an iOS Device Using Sony | Music Center Listening to Music on your PC via a Home Network Adjusting the Volume and Sound Quality Adjusting the Volume Enjoying Immersive Surround Exper
Saving Power in Standby Mode Performing Easy Setup Performing Advanced Settings Using the [Advanced Settings] Menu [Speaker Settings] [Audio Settings] [HDMI Settings] [Bluetooth Settings] [System Settings] [Network Settings] [Resetting] [Software Update] Updating the Software Troubleshooting Troubleshooting Power The speaker system does not power up. The speaker system does not turn on even when the TV is turned on. The speaker system turns off when the TV is turned off.
Sound No sound is output from the speaker system. The speaker system cannot connect to a TV with the BLUETOOTH function. No TV sound is output from the speaker system. The sound skips or noise is generated. Picture and sound of the device that is connected to the speaker system are not output from the TV when the speaker system is not turned on. The sound is output from both the speaker system and TV. The sound is interrupted while watching a TV program or content on a Blu-ray Disc, etc.
Remote Control The remote control of this speaker system does not function. Others The Control for HDMI function does not work properly. [PRTCT], [PUSH], speaker name ([FL], [FR], [RL], [RR], or [SUB]), and [POWER] flash alternately in the front panel display. [HIGH], [TEMP], and [ERROR] appear alternately for 2 seconds each in the front panel display, [STANDBY] appears in the front panel display, then the speaker system is turned off. [BT TX] appears in the front panel display.
Help Guide Home Theatre System HT-A9 About Manuals of the Speaker System The information included in each manual is as shown below. Startup Guide Introduces the initial procedures concerning installation and connection for using the speaker system, and operations until you play music. Operating Instructions Explains the basic operations. Connection with a TV or other devices Playback for music/sound of devices connected with an HDMI cable or the BLUETOOTH function Sound adjustment, etc.
5-025-234-11(2) Copyright 2021 Sony Corporation 8
Help Guide Home Theatre System HT-A9 What You Can Do with the Speaker System The speaker system supports object-based audio formats such as Dolby Atmos and DTS:X as well as HDR video formats such as HDR10, HLG, and Dolby Vision. Wireless LAN router Internet TV You can listen to sound of a TV with the speaker system by connecting the speaker system and TV with an HDMI cable or BLUETOOTH function.
The supplied speakers are connected to the control box automatically when they are turned on. Network You can perform streaming playback of music content or play music files stored on your PC with the speaker system by connecting the speaker system to the same network as that of the smartphone, tablet, or iOS device. What You Can Do by Connecting the Speaker System to a Network Optional subwoofer For the operations of the optional subwoofer, refer to its operating instructions.
Help Guide Home Theatre System HT-A9 Control Box Front 1. Remote control sensor Point the remote control at the remote control sensor to operate the speaker system. 2. Front panel display Rear 1. UPDATE port Connect the USB memory when updating the speaker system. 2. S-CENTER OUT jack 3. (power) button Turns on the speaker system or sets it to standby mode. 4. LAN(100) port 5. HDMI OUT (TV ARC/eARC) jack Connect a TV that has an HDMI input jack with an HDMI cable.
Related Topic When Your TV Has the S-CENTER SPEAKER IN Jack Connecting an AV Device Compatible with the 2K/4K Video Format Connecting an AV Device Compatible with the 8K Video Format 5-025-234-11(2) Copyright 2021 Sony Corporation 12
Help Guide Home Theatre System HT-A9 Speakers Front 1. Power indicator Displays the connecting status between the control box and speaker as well as the power condition of the speaker. Red Lights up: The speaker is in standby mode. Green Lights up: The speaker is connected to the control box. Flashes slowly: The speaker is attempting to connect to the control box. Flashes twice repeatedly: The speaker is in the pairing standby status via manual connection. Turns off The speaker is turned off. 2.
1. Wall mounting hole 2. Mounting hole for the general speaker stand Note When using the wall mounting hole (1) or mounting hole for the general speaker stand (2), peel off the cover on them with a safety-pin, etc.
Help Guide Home Theatre System HT-A9 Remote Control 1. (power) Turns on the speaker system or sets it to standby mode. (MUSIC SERVICE) button If you have previously played music on Spotify on the speaker system, you can resume playback by pressing this button. This button may not be available in some countries/regions. BLUETOOTH TV HDMI 2. AUTO SOUND VOICE NIGHT CINEMA MUSIC STANDARD IMMERSIVE AE 3.
Displays playback information on the TV screen. Playback information is displayed in the front panel display for TV input. 4. (up)/ (down)/ (left)/ (right) (enter) BACK OPTIONS Displays the options menu on the TV screen. The options menu is displayed in the front panel display for TV input. HOME 5. REAR (rear speakers volume) +/– Adjusts the volume of the rear speakers. (volume) +(*)/– Adjusts the volume.
Help Guide Home Theatre System HT-A9 Using the Home Menu You can display the home menu on the TV screen by connecting the speaker system and TV with an HDMI cable. 1 Press HOME. The home menu appears on the TV screen. 2 Press (enter). (up)/ (left)/ (right) to select the category that you want, then press (down) or The items for the selected category appear under the category list on the TV screen. [Watch]: Selects the input of the TV or AV device that is connected to the speaker system.
Help Guide Home Theatre System HT-A9 Installing the Control Box and Speakers 1 Choose an installation method for the control box and speakers. They can be installed on a TV stand, shelves, etc., or mounted on the wall. Example of installing on a TV stand and shelves: Example of mounting on the wall: Note Do not place the speakers in a shelf or right below the ceiling so as not to block the sound output from the top of the speakers. Do not place metal objects near the speaker system.
1. Install the control box on or in a shelf where the front panel display is not covered. 2. Choose the installation position of the speakers by checking the labels on the bottom of the speakers. Surround sound can be experienced more effectively by installing the 4 speakers to surround your listening position and installing the front speakers on both sides of the TV. If you install speakers as following, perform [Sound Field Adjustment] under [Manual Speaker Settings].
Help Guide Home Theatre System HT-A9 Mounting the Speakers on a Wall Speakers Note Prepare screws (not supplied) that are suitable for the wall material and stability. Depending on the wall material, the wall may be damaged. Fasten the screws securely in the wall beam. Hang the speakers horizontally on the reinforced wall. Have the installation done by a Sony dealer or licensed contractor and pay special attention to safety during the installation.
(e) Approx. 7.35 mm (approx. 19/64 in) 3 Peel off the cover on the rear of the speaker with a safety-pin, etc. Cover 4 Hang the speakers by confirming the type of the speakers. Check the label on the bottom of the speaker. Front left Front right Rear left Rear right Note Keep the cover that is peeled off in step 3 for use when you do not mount the speaker on a wall.
Help Guide Home Theatre System HT-A9 Connecting a TV Compatible with ARC/eARC 1 Connect the HDMI IN jack compatible with ARC/eARC on the TV and HDMI OUT (TV ARC/eARC) jack on the speaker system with the HDMI cable (supplied). HDMI cable (supplied) TV Note Make sure that the connectors are firmly inserted. Enable the Control for HDMI function on the TV. If the Control for HDMI function on the TV is not enabled, TV sound will not be output from the speaker system.
Help Guide Home Theatre System HT-A9 When Your TV Has the S-CENTER SPEAKER IN Jack You can output the center part of the speaker system sound from the TV by connecting the TV with the following method. 1 Connect the speaker system and TV with the HDMI cable (supplied). 2 Connect the S-CENTER SPEAKER IN jack on the TV and the S-CENTER OUT jack on the speaker system with the TV center speaker mode cable (supplied).
5-025-234-11(2) Copyright 2021 Sony Corporation 24
Help Guide Home Theatre System HT-A9 Connecting an AV Device Compatible with the 2K/4K Video Format You can output sound such as Dolby Atmos, Dolby TrueHD, and DTS:X in high quality by connecting an AV device to the speaker system. 1 Connect the HDMI OUT jack on the AV device and HDMI IN jack on the speaker system with an HDMI cable (not supplied). HDMI cable (not supplied) Blu-ray Disc player, set-top box, gaming console, etc. Note Make sure that the connectors are firmly inserted.
5-025-234-11(2) Copyright 2021 Sony Corporation 26
Help Guide Home Theatre System HT-A9 Connecting an AV Device Compatible with the 8K Video Format When you connect an AV device with the following methods, you can play 8K video and high quality sound such as Dolby Atmos, Dolby TrueHD, or DTS:X. 1 Connect the speaker system and TV with the HDMI cable (supplied). 2 Check that the eARC compatible HDMI IN jack on the TV is compatible with the 8K video input. Refer to the operating instructions of the TV.
When the eARC compatible HDMI IN jack on the TV does not support the 8K video input: Connect the HDMI OUT jack on an AV device to the HDMI IN jack compatible with the 8K video input on a TV with an HDMI cable (not supplied). Make sure that the eARC function of the TV is on. TV Compatible with 8K video input HDMI cable (not supplied) Blu-ray Disc player, set-top box, gaming console, etc. Note Make sure that the connectors are firmly inserted.
Help Guide Home Theatre System HT-A9 Connecting to the AC Outlet (mains) 1 Connect the AC adaptor (supplied) and AC power cord (mains lead) (supplied)(*) to the DC IN terminal of the control box, then connect to the AC outlet (mains). * Except for North American models For North American models For other models AC adaptor (supplied) AC power cord (mains lead) (supplied) 2 Connect the AC power cords (mains leads) (supplied) to the AC inlets on four speakers, then connect to the AC outlets (mains).
AC power cord (mains lead) (supplied) 5-025-234-11(2) Copyright 2021 Sony Corporation 30
Help Guide Home Theatre System HT-A9 Performing Initial Settings 1 Press (power) on the remote control supplied with the speaker system to turn on the speaker system. Operate the remote control by pointing it toward the front of the control box. When the speaker system turns on, [SETUP] appears in the front panel display. 2 Turn on the TV. If the [Speaker connection check] screen does not appear on the TV screen, change the TV input setting to the input that the speaker system is connected.
4 Perform initial settings by following the on-screen instructions. [ [ [ Language] Sound Field Optimization] Easy Network Setup - Start] Once [Setup is complete.] appears, select [Finish]. Note Depending on the order in which you turn on the TV and the speaker system, the speaker system may be muted and [MUTING] is displayed on the front panel display of the speaker system. If this happens, turn all devices off, then turn on the speaker system after turning on the TV.
Help Guide Home Theatre System HT-A9 If the Speakers Are not Connected Correctly The speakers are connected to the control box automatically when they are turned on. If you use multiple speaker systems and want to specify the control box that is connected wirelessly to the speakers, perform the manual connection by following the steps below. Power indicator LINK 1 Press HOME. The home menu appears on the TV screen.
The connecting process appears on the TV screen. To cancel the manual connection, select [Cancel]. 6 When all the speakers display [Connected], select [Finish]. 7 Press (enter). The manual connection is established and the power indicators of the speakers light in green. Note If you perform [Start manual linking], mode] is set to [Manual] automatically.
Help Guide Home Theatre System HT-A9 Watching TV 1 Press HOME. The home menu appears on the TV screen. 2 Select 3 Select the program using the TV remote control. [Watch] - [TV] on the home menu. The selected TV program appears on the TV screen and the TV sound is output from the speaker system. 4 Adjust the volume. Hint You can select [TV] directly by pressing TV on the remote control.
Help Guide Home Theatre System HT-A9 Playing the Connected AV Device 1 Press HOME. The home menu appears on the TV screen. 2 Select [Watch] - [HDMI] on the home menu. The image of the selected device appears on the TV screen and the sound is output from the speaker system. 3 Adjust the volume. Hint You can select [HDMI] directly by pressing HDMI on the remote control.
Help Guide Home Theatre System HT-A9 What You Can Do by Connecting a TV with the BLUETOOTH Function When using Sony TV(*) with the BLUETOOTH function, you can listen to sound of the TV or device that is connected to the TV by connecting the speaker system and TV wirelessly. * The TV needs to be compatible with A2DP (Advanced Audio Distribution Profile) of the BLUETOOTH profile. Sony TV Blu-ray Disc player, set-top box, gaming console, etc.
Help Guide Home Theatre System HT-A9 Listening to TV Sound by Connecting the Speaker System and TV Wirelessly You need to perform pairing of the speaker system and TV by using the BLUETOOTH function. Pairing is the process required to mutually register the information on BLUETOOTH devices to be connected wirelessly in advance. 1 Turn on the TV. 2 Press 3 Press TV, AUDIO, then BLUETOOTH on the remote control in sequence. 4 Make sure that [PAIRING] appears in the front panel display.
7 Make sure that [TV (BT)] appears in the front panel display. A connection between the speaker system and TV has been established. 8 Select the program or input of the device by using the TV remote control. The sound of the displayed image on the TV screen is output from the speaker system. 9 Adjust the volume of the speaker system by using the TV remote control. When pressing the muting button on the TV remote control, the sound is muted temporarily.
Help Guide Home Theatre System HT-A9 Listening to Sound of the Paired TV 1 Turn on the TV with the TV remote control. The speaker system is turned on by interlocking with the TV power and TV sound is output from the speaker system. 2 Select the program or input of the device by using the TV remote control. The sound of the displayed image on the TV screen is output from the speaker system. 3 Adjust the volume of the speaker system by using the TV remote control.
5-025-234-11(2) Copyright 2021 Sony Corporation 41
Help Guide Home Theatre System HT-A9 Listening to Music by Pairing the Mobile Device That Is Connected for the First Time To use the BLUETOOTH function, you need to perform pairing of the speaker system and mobile device in advance. 1 Press and hold the BLUETOOTH button for 2 seconds. 2 Make sure that [PAIRING] appears in the front panel display. The speaker system enters the pairing mode. 3 On the mobile device, search the speaker system by performing the pairing operation.
6 Start audio playback with the music app on the connected mobile device. Sound is output from the speaker system. 7 Adjust the volume. You can play or pause the content by using the playback operation buttons on the remote control. Hint If there is no mobile device that has been paired (ex. immediately after the purchase of the speaker system), the speaker system goes into pairing mode simply by changing the input to the BLUETOOTH input. Perform pairing for the second and subsequent mobile devices.
Help Guide Home Theatre System HT-A9 Listening to Music from the Paired Device 1 Turn the BLUETOOTH function of the mobile device to on. 2 Press the BLUETOOTH button. The speaker system automatically reconnects to the mobile device it was most recently connected to. 3 Make sure that [BT] appears in the front panel display. A connection between the speaker system and mobile device has been established. 4 Start audio playback with the music app on the connected mobile device.
Perform any of the following items. Disable the BLUETOOTH function on the mobile device. Press the BLUETOOTH button while the [Bluetooth Audio] screen appears on the TV screen. Set [Setup] - [Advanced Settings] - [Bluetooth Settings] - [Bluetooth Mode] to [Transmitter] or [Off]. Turn off the speaker system or mobile device.
Help Guide Home Theatre System HT-A9 Listening to Sound by Pairing with Headphones 1 Set the BLUETOOTH compatible headphones to pairing mode. Refer to the operating instructions of the headphones for the pairing method. 2 Press HOME. The home menu appears on the TV screen. 3 Select 4 Select [Bluetooth Settings] - [Bluetooth Mode] - [Transmitter]. [Setup] - [Advanced Settings] on the home menu. The speaker system enters BLUETOOTH transmission mode.
5-025-234-11(2) Copyright 2021 Sony Corporation 47
Help Guide Home Theatre System HT-A9 Listening to Sound with Paired Headphones 1 Set the BLUETOOTH function of the headphones to on. 2 Press HOME. The home menu appears on the TV screen. 3 Select 4 Select [Bluetooth Settings] - [Bluetooth Mode] - [Transmitter]. [Setup] - [Advanced Settings] on the home menu. The speaker system enters BLUETOOTH transmission mode and the speaker system automatically reconnects to the headphones that was most recently connected to.
Help Guide Home Theatre System HT-A9 About the Connection of the Headphones You may not be able to adjust the volume level depending on the BLUETOOTH compatible headphones. Input of BLUETOOTH is disabled when [Setup] - [Advanced Settings] - [Bluetooth Settings] - [Bluetooth Mode] is set to [Off] or [Transmitter]. You can register up to 9 BLUETOOTH devices. If a 10th BLUETOOTH device is registered, the oldest connected BLUETOOTH device will be overwritten by the new one.
Help Guide Home Theatre System HT-A9 What You Can Do by Connecting the Speaker System to a Network You can perform streaming playback of music content via the speaker system by operating a smartphone, tablet, or iOS device, or play music stored on a computer via the speaker system by connecting to the network. The Wi-Fi port and LAN(100) port of the speaker system have a router function which can forward audio data to another Sony audio product.
You can play music files stored on your computer on a network location via your home network. Note The server needs to be connected to the same network as that of the speaker system.
Help Guide Home Theatre System HT-A9 Setting up a Wireless Network Connection on the Home Menu Check the following information in advance. The network name (SSID)(*) The security key (password)(**) * ** 1 SSID (Service Set Identifier) is a name that identifies a particular access point.
Help Guide Home Theatre System HT-A9 Setting up a Wireless Network Connection Using Sony | Music Center Sony | Music Center can connect the speaker system to the same wireless network as that of the mobile device. For details, follow the instruction of the app or refer to the following URL. https://www.sony.
Help Guide Home Theatre System HT-A9 Setting up a Wi-Fi Connection Using an iOS Device The speaker system is compatible with Apple Setup. Using this function, you can connect the speaker system to the same network that connects your iOS device via Wi-Fi without entering the network name and password. 1 Press HOME on the remote control supplied with the speaker system. The home menu appears on the TV screen. 2 Select 3 Select [Network Settings]. [Setup] - [Advanced Settings] on the home menu.
Help Guide Home Theatre System HT-A9 Connecting to a PC or Router with a LAN Cable The following illustration is the example for connection of the speaker system and PC to your home network. LAN cable (not supplied) Internet Modem Router PC Note The PC needs to be connected to the same network as that of the speaker system. Hint We recommend that you use a shielded straight interface cable (not supplied).
Help Guide Home Theatre System HT-A9 Setting up a Wired Connection 1 Use a LAN cable to connect the speaker system to a router. 2 Press HOME. The home menu appears on the TV screen. 3 Select 4 Select [Network Settings] - [Internet Settings] - [Next]. 5 Select the IP address setting method. [Setup] - [Advanced Settings] on the home menu. [Auto]: Obtains an IP address automatically. [Manual]: Enter an IP address manually.
Help Guide Home Theatre System HT-A9 Enjoying 360 Reality Audio The speaker system is compatible with 360 Reality Audio. You can play 360 Reality Audio contents on the speaker system by selecting it on the streaming service app compatible with 360 Reality Audio. For details about 360 Reality Audio, refer to the following URL. https://www.sony.
Related Topic [System Settings] 5-025-234-11(2) Copyright 2021 Sony Corporation 58
Help Guide Home Theatre System HT-A9 Using Spotify You can select music on the Spotify app and play it on the speaker system. Playing music on the speaker system by using the “Spotify Connect” function Use your phone, tablet or computer as a remote control for Spotify. Go to spotify.com/connect to learn how. Hint If [Network/Bluetooth Standby] is set to [On], you can play music quickly even when the speaker system is in standby mode.
Help Guide Home Theatre System HT-A9 Streaming Music with Chromecast built-in The speaker system is compatible with Chromecast built-in, which can stream music to the speaker from the mobile device. You can select music content from a Chromecast-enabled app and play audio content on the speaker system or group that includes the speaker system. Controlling your music with a mobile device 1 Press HOME. The home menu appears on the TV screen. 2 Select [Listen] - [Chromecast built-in] on the home menu.
Hint An image such as an album cover appears in the playback screen if the played content supports the feature.
Help Guide Home Theatre System HT-A9 Operating the Speaker System by Talking to an Alexa Built-in Device Alexa is Amazon’s cloud-based voice service. You can play the sound on the speaker system by talking to an Alexa builtin device. To use this function, you will need to connect your Amazon account to the Alexa built-in device.
Help Guide Home Theatre System HT-A9 Streaming Music with an iOS Device The speaker system is compatible with AirPlay 2. You can select music content on an iOS device such as iPhone, iPad, and iPod touch and stream it to the speaker system. 1 Connect the iOS device by Wi-Fi to the same network as that of the speaker system. 2 Play the music you want to stream on the iOS device. 3 Display the AirPlay icon ( 4 Select the speaker system as the speaker to stream to on the iOS device.
Help Guide Home Theatre System HT-A9 Using Sony | Music Center Sony | Music Center is an application for controlling compatible Sony audio devices using the mobile device such as a smartphone or tablet. For details about Sony | Music Center, refer to the following URL. https://www.sony.net/smcqa/ 1 Install the free Sony | Music Center app on your mobile device. 2 Connect the mobile device via Wi-Fi to the same network as that of the speaker system. 3 Start Sony | Music Center.
Help Guide Home Theatre System HT-A9 Listening to Music on your PC via a Home Network You can play music files stored on your PC via your home network. Music files can be played by operating Sony | Music Center on a mobile device such as a smartphone or tablet. PC Wireless LAN router Smartphone or tablet 1 Connect the speaker system to a network. 2 Connect the PC to a network. For details, refer to the operating instructions of the PC. 3 Set the PC.
Setting up a Wireless Network Connection on the Home Menu Setting up a Wireless Network Connection Using Sony | Music Center Setting up a Wi-Fi Connection Using an iOS Device Connecting to a PC or Router with a LAN Cable Setting up a Wired Connection 5-025-234-11(2) Copyright 2021 Sony Corporation 66
Help Guide Home Theatre System HT-A9 Adjusting the Volume To adjust the speaker system volume Press (volume) +/–. The volume level appears in the front panel display. To adjust the bass sound volume Press BASS (bass sound volume) +/–. The volume level appears in the front panel display. Note The subwoofer is designed for playback of bass or low frequency sound. When the input source, such as in TV programs, does not contain much bass sound, the bass sound from the subwoofer may be difficult to hear.
Help Guide Home Theatre System HT-A9 Enjoying Immersive Surround Experience (IMMERSIVE AE) You can feel immersed by the sound from not only the horizontal direction, but also from the upward direction by working sound modes effectively. This function also works for the 2.0 channel signal such as TV programs. 1 Press IMMERSIVE AE to set the function on or off. The Immersive Audio Enhancement setting appears on the TV screen.
Help Guide Home Theatre System HT-A9 Setting the Sound Effect That Is Tailored to Sound Sources (Sound Mode) You can easily enjoy pre-programmed sound effects that are tailored to different kinds of sound sources. This function works when [Setup] - [Advanced Settings] - [Audio Settings] - [Sound Effect] is set to [Sound Mode On]. 1 Press AUTO SOUND, CINEMA, MUSIC, or STANDARD to select the sound mode. The selected sound mode appears on the TV screen.
Help Guide Home Theatre System HT-A9 Making Dialogs Clearer (VOICE) 1 Press VOICE to set the function on or off. The voice mode setting appears on the TV screen. [Voice: On]: Dialog is easily heard by enhancing dialog range. [Voice: Off]: Deactivates the voice mode function. Note The voice mode setting does not appear on the TV screen while the TV input is selected. In this case, you can check the voice mode setting in the front panel display.
Help Guide Home Theatre System HT-A9 Enjoying Clear Sound with Low Volume at Midnight (NIGHT) 1 Press NIGHT to set the function on or off. The night mode setting appears on the TV screen. [Night: On]: Sound is output at low volume with minimum loss of fidelity and clarity of dialog. [Night: Off]: Deactivates the night mode function. Note When you turn the speaker system off, this setting is set to [Night: Off] automatically.
Help Guide Home Theatre System HT-A9 When Watching the TV 1 Press OPTIONS. [SYNC] appears in the front panel display. 2 Press (right) or (enter). The adjusting time appears in the front panel display. 3 Adjust the delay using (up)/ (down), then press (enter). You can adjust from 0 msec to 300 msec in 25 msec increments. 4 Press OPTIONS. The options menu in the front panel display turns off.
Help Guide Home Theatre System HT-A9 When Watching Another Device 1 Press OPTIONS. The options menu appears on the TV screen. 2 Select [A/V sync]. 3 Adjust the delay using (up)/ (down), then press (enter). You can adjust from 0 msec to 300 msec in 25 msec increments. Hint If your TV has a function that adjusts the delay between the picture and sound, use it for adjustment. For details, refer to the operating instructions of the TV.
Help Guide Home Theatre System HT-A9 Enjoying Multiplex Broadcast Sound (AUDIO) You can enjoy multiplex broadcast sound when the speaker system receives a Dolby Digital multiplex broadcast signal. 1 Press AUDIO repeatedly to select the desired audio signal. The audio signal appears on the TV screen. [Audio: Main]: Sound of the main language is output. [Audio: Sub]: Sound of the sub language is output.
Help Guide Home Theatre System HT-A9 When Watching the TV By adjusting the dialog volume, you can easily listen to dialog since it stands out from the ambient noise. This function works while playing content that is compatible with the DTS:X dialog control function. The setting method differs depending on the input. 1 Press OPTIONS, display [DIALOG] in the front panel display using (enter). 2 Adjust the dialog volume using (up)/ (down), then press (up)/ (enter). You can adjust from 0.0 dB to 6.
Help Guide Home Theatre System HT-A9 When Playing Content on an AV Device By adjusting the dialog volume, you can easily listen to dialog since it stands out from the ambient noise. This function works while playing content that is compatible with the DTS:X dialog control function. The setting method differs depending on the input. 1 Press OPTIONS. The options menu appears on the TV screen. 2 Select [DTS Dialog Control]. 3 Adjust the dialog volume using (up)/ (down), then press (enter).
Help Guide Home Theatre System HT-A9 Operating the Speaker System by Interlocking with a TV (Control for HDMI Function) Connecting a TV compatible with the Control for HDMI function using an HDMI cable enables you to interlock the speaker system operation such as power on/off or volume adjustment with a TV.
If you turn off the speaker system before turning off the TV, the speaker system may not turn on automatically even though you turn on the TV next time. In this case, perform the following operation. Select the speaker system for the sound output device in the TV menu. When using Sony TV, turn on the speaker system while the TV is turned on. Volume adjustment The sound of the TV you are watching is output from the speaker system automatically.
Help Guide Home Theatre System HT-A9 Operating the Speaker System by Interlocking with a TV Compatible with the “BRAVIA” Sync Function “BRAVIA” Sync is an extended function developed by Sony based on the Control for HDMI function. By connecting “BRAVIA” Sync-compatible devices such as a TV or a Blu-ray Disc player using an HDMI cable, you can control the devices by interlocking them with each other.
Help Guide Home Theatre System HT-A9 Changing the Brightness of the Front Panel Display and Indicators (DIMMER) You can change the brightness of the front panel display and power indicator of the speaker. The brightness of the power indicator for the optional subwoofer also changes. 1 Press DIMMER repeatedly to select the desired display mode. The display mode appears on the TV screen. [Dimmer: Bright]: The front panel display and indicators light brightly.
Help Guide Home Theatre System HT-A9 Saving Power in Standby Mode Check that you have made the following settings: [Setup] - [Advanced Settings] - [HDMI Settings] - [Standby Through] is set to [Off]. [Setup] - [Advanced Settings] - [System Settings] - [Network/Bluetooth Standby] is set to [Off].
Help Guide Home Theatre System HT-A9 Performing Easy Setup You can make basic initial settings, speaker settings, and network settings for the speaker system easily by performing Easy Setup. 1 Press HOME. The home menu appears on the TV screen. 2 Select [Setup] - [Easy Setup] on the home menu. The [Easy Setup] screen appears on the TV screen. 3 Select the desired setting. [Easy Initial Setup]: Performs the basic initial settings including the speaker settings and network settings.
Help Guide Home Theatre System HT-A9 Using the [Advanced Settings] Menu You can make various adjustments to items such as picture and sound on the [Advanced Settings] menu. 1 Press HOME. The home menu appears on the TV screen. 2 Select [Setup] - [Advanced Settings] on the home menu. The [Advanced Settings] screen appears on the TV screen. 3 Select the setting item. [Speaker Settings]: Makes the speakers settings for installing and connections. [Audio Settings]: Makes the audio output settings.
Help Guide Home Theatre System HT-A9 [Speaker Settings] [Sound Field Optimization] This function automatically measures the positions of the four speakers and the distance from each speaker to the ceiling, and optimizes the surround sound quality to suit your environment. Follow the on-screen instructions to start the measurements. During the optimization, the speakers will make a sound for about a minute. Note Do not make loud noises, walk or stand in front of the speakers during optimization.
[On]: Normally select this. The speaker system automatically selects the better channel for transmission. This is the stronger mode for wireless interference. [Off]: The speaker system selects a channel from the limited frequency band to prevent external wireless interference. If sound dropping occurs while [On] is selected, it may be improved by selecting [Off]. [Wireless Playback Quality] You can set the wireless playback quality of the four supplied speakers and optional subwoofer.
Help Guide Home Theatre System HT-A9 [Audio Settings] [DSEE Extreme] This function is only available when [Auto Sound](*) or [Music] is selected as the sound mode. [On]: Upscales your compressed music accurately using AI technology, and it makes you feel as if you are in a recording studio or at a concert. [Off]: Off * Only when [Music] is selected with [Auto Sound]. Note This function is compatible with the 2-channel digital input signals of 44.1 kHz or 48 kHz sampling frequency.
Related Topic Setting the Sound Effect That Is Tailored to Sound Sources (Sound Mode) Enjoying Immersive Surround Experience (IMMERSIVE AE) 5-025-234-11(2) Copyright 2021 Sony Corporation 87
Help Guide Home Theatre System HT-A9 [HDMI Settings] [Control for HDMI] [On]: The Control for HDMI function is enabled. Devices connected with an HDMI cable can control each other. [Off]: Off [Standby Linked to TV] This function is available when you set [Control for HDMI] to [On]. [Auto]: If the input of the speaker system is [TV] or [HDMI], the speaker system turns off automatically when you turn off the TV.
You can select the video format that can be received. If the picture and sound of the device connected to the speaker system are not output correctly, change the [HDMI Signal Format] setting. [Enhanced format (4K120, 8K)]: Select when both the connected TV and devices support high definition video formats such as 4K 120p, 8K, etc. [Enhanced format]: Select when both the connected TV and devices support high definition video formats such as 4K 60p 4:4:4, etc.
Help Guide Home Theatre System HT-A9 [Bluetooth Settings] [Bluetooth Mode] You can enjoy content from a BLUETOOTH device by using this speaker system or listen to sound from this speaker system by using BLUETOOTH compatible headphones. [Receiver]: This speaker system is in receiver mode, which enables it to receive and output audio from the BLUETOOTH device. [Transmitter]: This speaker system is in transmitter mode, which enables it to send audio to the BLUETOOTH compatible headphones.
Help Guide Home Theatre System HT-A9 [System Settings] [Language] You can select the language you want for the speaker system on-screen display. [Network/Bluetooth Standby] [On]: You can turn the speaker system on via the network or BLUETOOTH function. [Off]: You can save power in standby mode. It may take time for sound to be output from the four supplied speakers or the optional subwoofer after turning the speaker system on in this mode.
Help Guide Home Theatre System HT-A9 [Network Settings] [Wi-Fi Connection] [On]: Enables Wi-Fi connection of the speaker system. [Off]: Disables Wi-Fi connection of the speaker system. [Internet Settings] You can set the network settings and check the network connections. [Network Connection Status] You can display the current network connection status. [Software Update Notification] [On]: Sets the speaker system to inform you of the latest software version information.
[Chromecast built-in] You can set sharing of usage data and confirm the Chromecast built-in feature. [Share usage data] [On]: Provides information related to the use of the cast feature to Google. [Off]: Off [About Chromecast built-in] Displays the reference URLs for the Chromecast built-in feature.
Help Guide Home Theatre System HT-A9 [Resetting] You can reset the speaker system settings to the factory default by selecting the group of settings. All the settings within the group will be reset.
Help Guide Home Theatre System HT-A9 [Software Update] You can update the software of the control box, four supplied speakers or optional subwoofer.
Help Guide Home Theatre System HT-A9 Updating the Software By updating your software to the latest version, you can take advantage of the newest functions. For information about update functions, visit the following website: For customers in Americas https://www.sony.com/am/support For customers in Europe https://www.sony.eu/support For customers in Asia-Pacific, Oceania, Middle East, and Africa https://www.sony-asia.com/support Note It may take up to 20 minutes for the update to be completed.
[Network Update] Updates the software using the available network. Make sure that the network is connected to the Internet. [USB Update] Updates the software using a USB memory. For details on updating, refer to the instructions that are displayed when downloading the update file. [Wireless Speakers Update] Updates the software of the speakers or optional subwoofer when the software of the speaker system is the latest version.
Help Guide Home Theatre System HT-A9 Troubleshooting If the speaker system does not work properly, handle it in the following order. 1. Search for the cause and solution of the issue by referring to these Help Guide or Operating Instructions. The troubleshooting method is listed in “Troubleshooting.” 2. Search for the cause and solution of the issue on the Sony support site. Sony support site provides latest support information and Frequently Asked Questions. For customers in Americas https://www.sony.
Help Guide Home Theatre System HT-A9 The speaker system does not power up. Check that the AC power cord (mains lead) is connected securely. Disconnect the AC power cord (mains lead) from the wall outlet (mains), and then reconnect after several minutes.
Help Guide Home Theatre System HT-A9 The speaker system does not turn on even when the TV is turned on. Set [Setup] - [Advanced Settings] - [HDMI Settings] - [Control for HDMI] to [On]. The TV must support the Control for HDMI function. For details, refer to the operating instructions of your TV. Check the speaker settings of the TV. The speaker system power syncs with the speaker settings of the TV. For details, refer to the operating instructions of your TV.
Help Guide Home Theatre System HT-A9 The speaker system turns off when the TV is turned off. Check the setting of [Setup] - [Advanced Settings] - [HDMI Settings] - [Standby Linked to TV]. When [Standby Linked to TV] is set to [On] or [Auto], the speaker system turns off automatically when you turn off the TV.
Help Guide Home Theatre System HT-A9 The speaker system does not turn off even when the TV is turned off. Check the setting of [Setup] - [Advanced Settings] - [HDMI Settings] - [Standby Linked to TV]. To turn the speaker system off automatically, regardless of the input when you turn off the TV, set [Standby Linked to TV] to [On]. The TV must support the Control for HDMI function. For details, refer to the operating instructions of your TV.
Help Guide Home Theatre System HT-A9 The speaker system cannot be turned off. The speaker system may be in demo mode. To cancel demo mode, reset the speaker system. Press and hold (power) on the control box for more than 10 seconds.
Help Guide Home Theatre System HT-A9 There is no picture or the picture is not output correctly. Select the appropriate input. When there is no picture while the TV input is selected, select the TV channel that you want using the TV remote control. When there is no picture while the HDMI input is selected, press the playback button of the connected device. Disconnect an HDMI cable, then connect it again. Make sure that the cable is firmly inserted.
Help Guide Home Theatre System HT-A9 The picture on the TV screen is distorted. Interference of the wireless function between the TV/other wireless devices and the control box may have occurred. Move the control box, change the direction of the control box, or install the control box far away from the TV/other wireless devices. There is an interference of the frequency band between the wireless LAN and the wireless connection of the speakers.
Help Guide Home Theatre System HT-A9 3D content from the HDMI IN jack does not appear on the TV screen. Depending on the TV or video device, 3D content may not appear. Check the supported HDMI video format.
Help Guide Home Theatre System HT-A9 High definition video signal (4K/60p 4:4:4, 4:2:2 and 4K/60p 4:2:0 10 bit, etc.) from the HDMI IN jack does not appear on the TV screen. Depending on the TV or the video device, high definition video signals such as 4K may not appear. Check the video capability and settings of your TV and video device.
Help Guide Home Theatre System HT-A9 An image is not displayed on the entire TV screen. The aspect ratio on the media is fixed.
Help Guide Home Theatre System HT-A9 Picture and sound of the device that is connected to the speaker system are not output from the TV when the speaker system is not turned on. Set [Setup] - [Advanced Settings] - [HDMI Settings] - [Control for HDMI] to [On] on the speaker system, and then set [Standby Through] to [Auto] or [On]. Turn on the speaker system, and then switch the input for the device playing.
Help Guide Home Theatre System HT-A9 HDR contents cannot be shown in high-dynamic range. Check the settings of the TV and connected device. For details, refer to the operating instructions of your TV and the connected device. Depending on the [HDMI Signal Format] setting, an AV device may not be able to output HDR contents in HDR format. Change the setting of [Setup] - [Advanced Settings] - [HDMI Settings] - [HDMI Signal Format] - [HDMI IN] according to the video format that is supported by the AV device.
Help Guide Home Theatre System HT-A9 No sound is output from the speaker system. Check that the AC power cords (mains leads) of the control box and speakers are connected securely. If the power indicator of the speaker is turned off, try the following. Check that the AC power cord (mains lead) of the speaker is connected securely. Press (power) on the bottom of the speaker to turn on the speaker. If the power indicator on the speaker flashes slowly in green or lights in red, try the following.
Help Guide Home Theatre System HT-A9 The speaker system cannot connect to a TV with the BLUETOOTH function. When you connect the speaker system and TV with an HDMI cable, the BLUETOOTH connection is canceled.
Help Guide Home Theatre System HT-A9 No TV sound is output from the speaker system. Check the type and connection of an HDMI cable or TV center speaker mode cable that is connected to the speaker system and the TV. Disconnect the cables that are connected to the TV and the speaker system, then connect them firmly again. Disconnect the AC power cords (mains leads) of the TV and the speaker system from the AC outlets (mains), then connect them again.
Help Guide Home Theatre System HT-A9 The sound skips or noise is generated. Install the control box and speakers at a distance of 1.5 m (5 ft) or more from a wireless LAN router, etc. It may be improved by changing the direction or the antenna’s angle of the wireless LAN router. Wireless LAN router, etc. (a) 1.5 m (5 ft) or more Set [Setup] - [Advanced Settings] - [Speaker Settings] - [Wireless Speaker Settings] - [Wireless Playback Quality] to [Connection].
Help Guide Home Theatre System HT-A9 Picture and sound of the device that is connected to the speaker system are not output from the TV when the speaker system is not turned on. Set [Setup] - [Advanced Settings] - [HDMI Settings] - [Control for HDMI] to [On] on the speaker system, and then set [Standby Through] to [Auto] or [On]. Turn on the speaker system, and then switch the input for the device playing.
Help Guide Home Theatre System HT-A9 The sound is output from both the speaker system and TV. Mute the sound of the speaker system or TV. When you connect the speaker system and TV with the TV center speaker mode cable and set [Setup] [Advanced Settings] - [Speaker Settings] - [TV Center Speaker Mode] to [On], the center part of the speaker system sound is output from the TV.
Help Guide Home Theatre System HT-A9 The sound is interrupted while watching a TV program or content on a Blu-ray Disc, etc. Check the sound mode setting. If the sound mode is set to [Auto Sound], the sound may be interrupted when the sound mode is changed automatically according to the information of the program that is being played. If you do not want to change the sound mode automatically, set the sound mode to a setting other than [Auto Sound].
Help Guide Home Theatre System HT-A9 The TV sound from this speaker system lags behind the image. Set the adjustment value of the delay between the picture and sound to 0 msec if it is set to the range between 25 msec and 300 msec. A time gap between the sound and picture may occur depending on the sound source. If your TV has a function that delays the image, use it for adjustment. For details, refer to the operating instructions of your TV.
Help Guide Home Theatre System HT-A9 No sound or only a very low-level sound of the device connected to the speaker system is heard. Press (volume) + on the remote control and check the volume level. Press (muting) or (volume) + on the remote control to cancel the muting function. Make sure the input source is selected correctly. You should try other input sources by pressing the input select button on the remote control (TV/HDMI/BLUETOOTH). Make sure that the connectors are firmly inserted.
Help Guide Home Theatre System HT-A9 The surround effect cannot be obtained. Depending on the input signal and the sound mode setting, surround sound processing may not work effectively. The surround effect may be subtle, depending on the program or disc. To play multi-channel audio, check the digital audio output setting on the device connected to the speaker system. For details, refer to the operating instructions of the connected device.
Help Guide Home Theatre System HT-A9 No sound is output from the optional subwoofer. It may be improved by setting [Setup] - [Advanced Settings] - [Speaker Settings] - [Wireless Speaker Settings] [Wireless Playback Quality] to [Connection]. Refer to the operating instructions of the optional subwoofer.
Help Guide Home Theatre System HT-A9 Sound is not output from some speakers. Some speakers may not output sound depending on the contents or sound mode.
Help Guide Home Theatre System HT-A9 Sound Field Optimization is failed. Speakers may not be correctly located. Check the installation location on the labels on the bottom of the four speakers and install them in the correct location. Install the speakers upright so that the labels on the bottom of the speakers are directed downwards. If the speaker is installed sideways, Sound Field Optimization cannot be performed properly.
Microphones for measurement 5-025-234-11(2) Copyright 2021 Sony Corporation 124
Help Guide Home Theatre System HT-A9 Pairing cannot be achieved. Bring this speaker system and the BLUETOOTH device closer together. Make sure this speaker system is not receiving interference from a wireless LAN device, other 2.4 GHz wireless devices, or a microwave oven. If a device that generates electromagnetic radiation is nearby, move the device away from this speaker system.
Help Guide Home Theatre System HT-A9 BLUETOOTH connection cannot be completed. Make sure that [BT] appears in the front panel display. Make sure the BLUETOOTH device to be connected with is turned on and the BLUETOOTH function is enabled. Bring this speaker system and the BLUETOOTH device closer together. Pair this speaker system and the BLUETOOTH device again. You may need to cancel the pairing with this speaker system using your BLUETOOTH device first. Pairing information may be deleted.
Help Guide Home Theatre System HT-A9 Sound of the connected BLUETOOTH mobile device is not output from the speaker system. Make sure that [BT] appears in the front panel display. Bring this speaker system and the BLUETOOTH device closer together. If a device that generates electromagnetic radiation, such as a wireless LAN device, other BLUETOOTH devices, or a microwave oven is nearby, move the device away from this speaker system.
Help Guide Home Theatre System HT-A9 Pairing cannot be achieved. Bring this speaker system and the BLUETOOTH headphones closer together. Make sure this speaker system is not receiving interference from a wireless LAN device, other 2.4 GHz wireless devices, or a microwave oven. If a device that generates electromagnetic radiation is nearby, move the device away from this speaker system.
Help Guide Home Theatre System HT-A9 BLUETOOTH connection cannot be completed. Make sure that [BT TX] appears in the front panel display. Make sure the BLUETOOTH headphones to be connected with is turned on and the BLUETOOTH function is enabled. Bring this speaker system and the BLUETOOTH headphones closer together. Pair this speaker system and the BLUETOOTH headphones again. You may need to cancel the pairing for the BLUETOOTH headphones with this speaker system first. Pairing information may be deleted.
Help Guide Home Theatre System HT-A9 No sound is output from the connected BLUETOOTH headphones. Make sure that [BT TX] appears in the front panel display. Bring this speaker system and the BLUETOOTH headphones closer together. If a device that generates electromagnetic radiation, such as a wireless LAN device, other BLUETOOTH devices, or a microwave oven is nearby, move the device away from this speaker system.
Help Guide Home Theatre System HT-A9 The BLUETOOTH connection with the headphones becomes disconnected. When using Chromecast built-in, the headphones cannot connect to the speaker system via the BLUETOOTH function.
Help Guide Home Theatre System HT-A9 The speaker system cannot connect to the network or the network connection is unstable. Make sure that the wireless LAN router is turned on. Check the network connection and network settings. Depending on the usage environment (including the wall material), radio wave reception conditions, or obstacles between the speaker system and wireless LAN router, the possible communication distance may be shortened.
Help Guide Home Theatre System HT-A9 The wireless LAN router you want is not shown in the wireless network list. Press OPTIONS on the remote control to update the list. If the wireless LAN router you want is still not detected, select [New connection registration] from the network list, then input a network name (SSID) manually.
Help Guide Home Theatre System HT-A9 You cannot connect the speaker system to the Internet. Check the wireless LAN connection. Restart the wireless LAN router.
Help Guide Home Theatre System HT-A9 The remote control of this speaker system does not function. Point the remote control at the remote control sensor on the control box. Remove any obstacles in the path between the remote control and the speaker system. Replace both batteries in the remote control with new ones if they are weak. Make sure you are pressing the correct button on the remote control.
Help Guide Home Theatre System HT-A9 The Control for HDMI function does not work properly. Check the connection with the speaker system. Enable the Control for HDMI function on the TV. For details, refer to the operating instructions of your TV. Wait a while, and then try again. If you unplug the speaker system, it will take a while before operations can be made. Wait for 15 seconds or longer, and then try again. Make sure the devices connected to the speaker system support the Control for HDMI function.
Help Guide Home Theatre System HT-A9 [PRTCT], [PUSH], speaker name ([FL], [FR], [RL], [RR], or [SUB]), and [POWER] flash alternately in the front panel display. Press (power) on the corresponding speaker ([FL]: left front speaker, [FR]: right front speaker, [RL]: left rear speaker, [RR]: right rear speaker, [SUB]: optional subwoofer) to turn each off. For the speaker, disconnect the AC power cord (mains lead), then restart the speaker system.
Help Guide Home Theatre System HT-A9 [HIGH], [TEMP], and [ERROR] appear alternately for 2 seconds each in the front panel display, [STANDBY] appears in the front panel display, then the speaker system is turned off. High-temperature is detected in the speaker system. Press (power) to restart the speaker system.
Help Guide Home Theatre System HT-A9 [BT TX] appears in the front panel display. Set [Setup] - [Advanced Settings] - [Bluetooth Settings] - [Bluetooth Mode] to [Receiver]. [BT TX] appears in the front panel display if [Bluetooth Mode] is set to [Transmitter].
Help Guide Home Theatre System HT-A9 Wireless functions (wireless LAN, the BLUETOOTH function, speakers, or optional subwoofer) are unstable. Do not place metal objects other than a TV around the speaker system.
Help Guide Home Theatre System HT-A9 Spotify cannot be played with the MUSIC SERVICE button, or cannot be played on the way of playback. Play music on Spotify on the speaker system by using the Spotify Connect function on the Spotify app of the mobile device.
Help Guide Home Theatre System HT-A9 The speaker system restarts. When connecting to a TV with a resolution that is different from that of the speaker system, the speaker system may restart to reset the picture output setting.
Help Guide Home Theatre System HT-A9 Resetting the Speaker System If the speaker system still does not operate properly, reset the speaker system as follows. 1 Press HOME. The home menu appears on the TV screen. 2 Select 3 Select [Resetting]. 4 Select the menu item you want to reset. 5 Select [Start]. [Setup] - [Advanced Settings] on the home menu. To cancel resetting Select [Cancel] in step 5.
Help Guide Home Theatre System HT-A9 Supported Input Audio Formats Supported audio formats differ depending on the input setting of the speaker system. “ audio format and “–” indicates the unsupported audio format in the table below. Format HDMI input TV input (eARC) ” indicates the supported TV input (ARC) LPCM 2ch LPCM 5.1ch – LPCM 7.1ch – Dolby Digital Dolby TrueHD – Dolby Digital Plus Dolby Atmos – Dolby Atmos - Dolby TrueHD – Dolby Atmos - Dolby Digital Plus DTS DTS-ES Discrete 6.
Help Guide Home Theatre System HT-A9 Supported HDMI Video Formats Video formats supported by this speaker system are as follows. 8K 24/25/30/50/60 Hz 4K 24/25/30/50/60/100/120 Hz 1080p 24/25/30/50/60/100/120 Hz 1080i 50/60 Hz 720p 24/30/50/60 Hz 576p 50 Hz 480p 60 Hz About the [HDMI Signal Format] setting When [Setup] - [Advanced Settings] - [HDMI Settings] - [HDMI Signal Format] is set to [Enhanced format (4K120, 8K)], all video formats supported by this speaker system can be input.
All HDMI IN and HDMI OUT (TV ARC/eARC) jacks support transmission of 4K 120p or 8K, HDCP2.2 and HDCP2.3(*1), BT.2020 wide color spaces(*2), and HDR (High Dynamic Range)(*3) contents pass-through. When connecting to a TV which resolution is different from that of the speaker system, the speaker system may restart to reset the picture output setting. *1 HDCP2.2 and HDCP2.3 are newly enhanced copyright protection technology that is used to protect content such as 4K movies.
Help Guide Home Theatre System HT-A9 On BLUETOOTH Communication BLUETOOTH devices should be used within approximately 10 meters (33 feet) (unobstructed distance) of each other. The effective communication range may become shorter under the following conditions.
Help Guide Home Theatre System HT-A9 Copyrights and Trademarks This speaker system incorporates Dolby(*) Digital and the DTS(**) Digital Surround System. * ** Manufactured under license from Dolby Laboratories. Dolby, Dolby Vision, Dolby Atmos, and the double-D symbol are registered trademarks of Dolby Laboratories Licensing Corporation. Confidential unpublished works. Copyright © 2012–2020 Dolby Laboratories. All rights reserved. For DTS patents, see http://patents.dts.com.
You may find a copy of the relevant source code as required under the GPLv2 (and other licenses) at https://oss.sony.net/Products/Linux You may obtain the source code as required by the GPLv2 on a physical medium from us for a period of three years after our last shipment of this product by applying through the form at https://oss.sony.net/Products/Linux This offer is valid to anyone in receipt of this information.
Subwoofer Operating Instructions SA-SW5 5-027-345-12(1) ©2021 Sony Corporation Printed in Malaysia
Owner’s Record Rear The model and serial numbers are located on the rear of the subwoofer. Record the serial numbers in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. SA-SW5 Serial No. ̖ ̗ About compatible models for the subwoofer The SA-SW5 subwoofer works only with the specified model. For information about compatible models, visit Sony's website.
2 Connect the AC power cord (mains lead) If Wireless Transmission is Unstable (supplied) to the subwoofer, and then connect the cord to the AC outlets (mains). If you use multiple wireless systems, such as a wireless LAN, the wireless signals may become unstable. In this case, the transmission may be improved by changing the following setting. The following operation is described for the subwoofer used with the compatible model HT-A7000 or HT-A9. Use the remote control supplied ECJm:=== ..
Important information on software This product contains software that is subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL''). These establish that customers have the right to acquire, modify, and redistribute the source code of said software in accordance with the terms of the GPL or the LGPL. For the method to confirm the GPL, LGPL and other software licenses contained in the subwoofer, please refer to the Operating Instructions of a compatible model.