INSTRUCTION MANUAL
Introduction Thank you for your purchase of "SO-41A". For proper use of the SO-41A, read this manual carefully before and while you use the SO-41A. About manuals ● " クイックスタートガイド (Quick Start Guide)" (Supplied accessories) Part names and functions are explained. ● "Instruction Manual" application (Application of the terminal) (in Japanese only) Operations and settings of each function are explained. You can search by free word, open a setting screen or launch an application from a displayed page, etc.
❖Information ・ ・ ・ ・ ・ ・ ・ ・ ・ Please note that "SO-41A" is called as "the terminal" in this manual. In this manual, the description is written based on the default state. In this manual, the easier procedure is described for the functions and settings which have multiple operating procedures. The terminal may have a software update of the operating system (OS) for the purpose of quality improvement or addition of functions. In that case, operation procedure may change.
Contents ■ Supplied accessories. . . . . . . . . . . . . . . . . 1 Precautions . . . . . . . . . . . . . . . . . . 4 About using the terminal....................................................4 Recommended features......................................................7 Safety Precautions (Always follow these directions).....................................................................................8 Handling precautions.........................................................
Apps . . . . . . . . . . . . . . . . . . . . . . 145 Data communication. . . . . . . .209 d メニュー (dmenu)............................................................ 145 dmarket.................................................................................... 145 Play Store................................................................................. 146 Osaifu-Keitai........................................................................... 147 TV......................................................
Precautions About using the terminal The terminal supports LTE, W-CDMA, GSM/ GPRS and Wireless LAN Systems. ・ Because a terminal operates using radio frequencies, it cannot be used inside a tunnel, underground, in a building or other locations where radio waves do not reach, in locations with weak radio wave condition, or out of LTE/ FOMA service area. The services may not be available on the upper floors of high-rise apartments or buildings, even if there are no obstructions around you.
The terminal automatically performs communication for synchronizing data, checking the latest software version, and maintaining a connection with the server, and for other purposes. If you transmit a large amount of data, such as when downloading applications or watching video, a packet communication charge becomes high. Subscription to Packet Pack/packet flat-rate service is highly recommended.
The screen may become partially dark or the colors may be changed if you set the display brightness to brighter than necessary or use the terminal extremely for a long time. Also, unevenness of colors or brightness, or changes of colors may be found depending on direction you are looking. That is because of the structure of organic EL display, not a malfunction. ・ DOCOMO is not liable to any failures or malfunctions for commercially available optional equipment.
Recommended features Cinema Pro "Cinema Pro" feature, supervised by Sony professional camera team, is specialized for shooting videos. You can enjoy the operational feeling like shooting with a professional cinema camera, and its imaging. Record of casual daily scenes can be in cinematic impression. → P.140 Multi-window When you want to "post to SNS while seeing a video" or "search for the Internet when writing email", the Multi-window feature is very useful.
Safety Precautions (Always follow these directions) For safe and proper use of the terminal, please read the "Safety Precautions" prior to use. ■ ALWAYS observe the safety precautions since they intend to prevent personal injury or property damage. ■ The following symbols indicate the different levels of injury or damage that may result if the guidelines are not observed and the terminal is used improperly.
1. Handling the terminal, adapter, docomo nano UIM card, and 3.5 mm earphone jack conversion/TV antenna cable (common) Don’t DANGER Don’t Don’t Don’t Do not use, store or leave the equipment in locations subject to high temperature or accumulation of heat (e.g. by the fire, near a heater, under a kotatsu or bedding, in direct sunlight, in a car in the hot sun). Doing so may cause fire, burns, injury, electric shock, etc.
No disassembly No liquids No liquids Do Do not disassemble or modify the equipment. Doing so may cause fire, burns, injury, electric shock, etc. Do not let the equipment get wet with liquids such as water (drinking water, sweat, seawater, urine of pet animals, etc.). Doing so may cause fire, burns, injury, electric shock, etc. For waterproofness, see the following. ⇒ P.26 "Waterproofness/Dustproofness" Do not allow liquids such as water (drinking water, sweat, seawater, urine of pet animals, etc.
CAUTION Don’t Don’t Don’t Don’t Don’t Do not use damaged equipment. Doing so may cause fire, burns, injury, etc. Do Do not place on an unstable or inclined platform. Be careful especially when vibrator is set. Doing so may cause the device to fall etc. and cause injury. Do not use or keep in a place that is very humid, dusty, or subject to high temperature. Doing so may cause fire, burns, electric shock, etc. For waterproofness/dustproofness, see the following. ⇒ P.
WARNING Don’t Do not turn on or flash the flash/photo light with the luminous part close to the other people's eyes. Keep enough distance away especially from babies and infants. Doing so may cause blurred vision etc. Or it may dazzle his/her eyes or scare him/her causing an accident such as injury. Don’t Do not turn on or flash the flash/photo light toward a driver of a car etc. Doing so may disturb driving and cause an accident etc. Don’t Do not watch a repeatedly-blinking screen for a long time.
Do Do Do Do If you have a weak heart, set the vibrator or ringtone volume carefully. Sudden vibration or ringtone sounding when for incoming call astonishes you and it may affect your heart. If you wear any electronic medical equipment, check with the relevant medical electronic equipment manufacturer or vendor whether the operation may be affected by radio waves. The radio waves from the terminal may affect the electronic medical equipment.
Don’t Do Do Do If the substance leaks out from the internal battery, do not make it contact with your skin of face or hands, clothes, etc. Doing so may cause injury etc. on your eyes or skin. If the internal substance gets into your eyes, mouth, etc. or contacts skin or clothes, immediately rinse the contacted area with clean water. If the substance gets into your eyes, mouth, etc. immediately see a doctor after rinsing.
Don’t Don’t Don’t Don’t Don’t Do not touch the adapter if you hear thunder. Doing so may cause electric shock etc. Do Do not short-circuit the charging jack while it is connected to a power outlet or accessory socket. Do not touch the charging jack with your hands, fingers, or any part of your body. Doing so may cause fire, burns, electric shock, etc. Do not place heavy objects on the adapter cord, or do not apply unnecessary force such as pulling etc.
Do Do Unplug Unplug When plugging/unplugging an adapter into/from the terminal, plug/unplug the adapter straight toward the jack without applying excessive force such as pulling the cord etc. Incorrect plugging/unplugging may cause fire, burns, injury, electric shock, etc. If the charging terminal is deformed such as being bent etc., stop using immediately. Do not use it with the deformation restored. Doing so may cause fire, burns, injury, etc. due to short-circuit of charging terminal.
Do Do When you get close to other people within 15 cm just like not having enough space to turn around, set the radio wave of the terminal to OFF beforehand (Airplane mode, to Power off, etc.). A person in close proximity may put on implanted a medical electrical equipment such as pacemakers and ICDs. The radio waves from the terminal may affect the performance of electronic medical equipment. Follow the instructions of each medical facility for the use of the terminal on their premises.
Part Rubber gasket of the cover of docomo nano UIM card/microSD card slot Inner side of cover of docomo nano UIM card/microSD card slot Tray of docomo nano UIM card/tray of microSD card ■ Material Surface treatment Silicon rubber ― Handling precautions ■ Common precautions ・ Polycarbonate ― resin + elastomer resin Polyacetal resin ― The adapter, the docomo nano UIM card, and the 3.5mm Earphone jack conversion/TV Antenna cable SO01 are not waterproof/dustproof.
- Drops of water or dirt left on the display may cause stains. - Do not use alcohol, thinner, benzine, cleaning detergent, etc. to clean the terminal. These chemicals may erase the printing on the terminal or cause discoloration. ・ Clean the jacks or the fingerprint sensor occasionally and use the terminal in a clean state. If the jack etc. is dirt, you may not use the terminal normally. When cleaning, be careful not to damage the jack etc. ・ Make sure to use the terminal without excessive force.
It is not abnormal if the terminal becomes warm while in use and charging. You can continue using the terminal. ・ Do not expose the camera lens under direct sunlight. ・ If you do so, some of the elements may melt or become faded. ・ ・ The functions using the proximity sensor may not work properly. For a location of proximity, see the following. ⇒ P.32 "Part names and functions" ・ Do not subject the fingerprint sensor to strong impact or scratch it.
・ To store the terminal, avoid the following conditions so as not to degrade the performance or the battery life of the internal battery. - The battery is fully charged (immediately after the charging is complete) - The battery has run out (the terminal cannot power on) An appropriate battery level for storing is about 40%. ・ Type of internal battery for the terminal is as follows.
Take an expended docomo nano UIM card to a sales outlet such as docomo Shop for proper disposal in order to protect the environment. ・ Do not carelessly damage, contact, or short-circuit an IC. ・ ・ Frequency band The frequency band used by the terminal's Bluetooth/wireless LAN function is written as follows: Doing so may cause data loss or malfunction. ・ Do not drop a docomo nano UIM card or subject it to impact. Doing so may cause malfunction.
・ Bluetooth cautions The operating frequency band of the terminal is used by industrial, scientific, consumer and medical equipment including microwave ovens, premises radio stations for identifying mobile units used in the manufacturing lines of plants (radio stations requiring a license), specified low power radio stations (radio stations requiring no license) and amateur radio stations (hereinafter referred to as "another station").
・ 2.4GHz device cautions The operating frequency band of the WLAN device is used by industrial, scientific, consumer and medical equipment including home electric appliances such as microwave ovens, premises radio stations for identifying mobile units used in the manufacturing lines of plants (radio stations requiring a license), specified low power radio stations (radio stations requiring no license) and amateur radio stations (radio stations requiring a license).
■ Supported frequency bands GSM/GPRS/EDGE : 850, 900, 1800, 1900MHz. UMTS : 2100 (Band I), 850 (Band V), 800 (Band VI), 800 (Band XIX)MHz. LTE : Bands 1, 3, 5, 12, 19, 21, 39. WLAN 2.4G/5G, NFC GSM 850/900 : 33dBm, DCS (1800)/ PCS (1900) : 30dBm, UMTS : 24dBm, LTE : 23dBm, WLAN : 2.4GHz<100mW, 5.15-5.35GHz<200mW, 5.47-5.725GHz<200mW, 5.735-5.835GHz<25mW, NFC 13.56MHz ■ Note ・ Do not use a remodeled terminal. Using a remodeled terminal violates the Radio Law/Telecommunications Business Act.
Waterproofness/ Dustproofness SO-41A provides waterproofness property of IPX5*1, IPX8*2, and dustproofness property of IP6X*3 with the cover of docomo nano UIM card/microSD card slot firmly attached. *1 IPX5 means that a communication device keeps functioning after applying a jet flow of 12.5 L/min. from every direction from a distance of approximately 3 m for at least 3 minutes using water nozzle in 6.3 mm inner diameter.
・ You can use the terminal in a bathroom. - Do not immerse the terminal into a bathtub. Also, do not use the terminal in hot water. Doing so may cause malfunction. If you should fall the terminal into the bathtub, immediately pick it up to drain water in specified procedure (P.30). - Never put the terminal in hot spring water or water containing soap, detergent or bath powder. In case the terminal gets wet with water other than tap water, wash it in the procedure above.
■ Opening the cover of docomo nano UIM card/microSD card slot Put your tip of finger (fingernail) into the groove and draw the cover out in the arrow direction. ■ Closing the cover of docomo nano UIM card/microSD card slot Push the tray all the way in the arrow direction and firmly press parts and make sure that there are no gaps between the terminal and the cover.
Do not perform actions shown in the illustrations below. Using Soap/Detergent/ Washing with brush/sponge Bath powder Soaking in ocean water Machinewashing Using in hot spring Do not move the terminal in water or slam the terminal against the surface of water. ・ If you put the terminal in tap water, be sure to have it within 30 minutes. ・ When you use the terminal in swimming pool, obey rules of the facility. ・ The terminal does not float on water. ・ Do not leave water on the terminal.
c DOCOMO does not guarantee actual operations under all states. Malfunctions deemed to be caused by inappropriate operation by the customer are not covered by the warranty. Draining water from the terminal When the terminal is wet, water may flow out after wiping it off; drain the water in the following steps. a Hold the terminal firmly and wipe off moisture on the terminal surface and back side with dry, clean cloth etc.
d Wipe off water drained from the terminal with dry, clean cloth etc., and dry naturally. ・ Wipe off water drained from the terminal with dry, clean cloth etc., and dry naturally. ・ Do not wipe off water remaining in gaps directly with a cotton swab etc. ・ Dry the terminal naturally for about 3 hours at room temperature. ・ Never connect a Type-C plug if the terminal is wet.
Before using the terminal Part names and functions b c Top de f g a l d e f Front camera lens → P.127 Earpiece/speaker Proximity/light sensor*1 : Detects a face approach during a call to prevent misoperation, or used for automatic control of the screen brightness. g Notification LED → P.64 h Touch screen → P.49 i Speaker j Mouthpiece/microphone k USB Type-C jack : Use when charging, etc. It supports USB Power Delivery.
n ❖Note o The back panel cannot be removed. Attempting to remove the back panel with excessive force may cause damage or a malfunction. ・ The battery is built into the terminal and not removal. ・ p q r o Back n o p q r Flash/Photo light LTE antenna section*2 Camera lens → P.127 mark → P.147, P.211 Wi-Fi antenna section*2 *1 Do not cover the sensor area with a sticker etc. *2 It is built into the terminal. Covering with your hand may affect the quality of communications.
docomo nano UIM card The docomo nano UIM card is an IC card recorded user information such as your phone number etc. ・ You can use the terminal with a docomo nano UIM card. If you have a docomo mini UIM card, UIM, or FOMA card, bring it to a docomo Shop to replace it with a docomo nano UIM card. ・ When docomo nano UIM card is not inserted to the terminal, making calls, packet communication, etc. are not available.
4 Hold the terminal horizontally and insert the tray with the card into the terminal and push it straight. ・ Check the orientation of the terminal and the tray. Removing docomo nano UIM card 1 2 5 Push the tray deeply and firmly press the parts indicated with and make sure that there are no gaps between the terminal and the cover. Draw the cover of docomo nano UIM card/microSD card slot (P.28). Draw the tray straight to remove from the terminal (P.34).
5 Firmly push the tray deeply and make sure that there are no gaps between the terminal and the cover (P.35). microSD card You can save the data in the terminal to a microSD card or import data from the microSD card to the terminal. ・ The terminal supports microSD card of up to 2GB, and microSDHC card of up to 32GB, microSDXC card of up to 512GB (As of September, 2019). ・ DOCOMO does not guarantee operations of any commercially available microSD card.
The terminal supports microSD cards of up to Class 10 and UHS speed class 1. Note that the speed class indicates performance of microSD cards and all the functions may not be performed at the speed class rate. ・ Although a microSD card can be used on other compatible device, data which is transferred from the other device may not be viewed/played on the terminal. Also, data saved to the microSD card from the terminal may not be viewed/played on another devices.
4 Hold the terminal horizontally and insert the tray with the card into the terminal and push it straight. ・ 5 Check the orientation of the terminal and the tray. Push the tray deeply and firmly press the parts indicated with and make sure that there are no gaps between the terminal and the cover. ・ When the terminal is turned on, appears on the status bar. Removing microSD card 1 Draw the cover of docomo nano UIM card/microSD card slot (P.28).
5 Firmly push the tray deeply and make sure that there are no gaps between the terminal and the cover (P.38). FCC ID To view the regulatory compliance mark. 1 Find and tap [Settings]u[About phone]u[Certificates]. Regulatory compliance mark such as FCC ID is displayed on the screen. Charging The internal battery is not fully charged at the time of purchase. ・ Estimated charging time (P.243) Life of the internal battery The internal battery is a consumable part.
Use a compatible AC adapter or USB cable A to C for charging. If you use a charger other than compatible ones, charging may not be available or operations may not be performed correctly. ・ Insert and remove the AC adapter cord or USB cable A to C slowly and evenly so that excessive force is not applied. ・ When charging is started, the notification LED of the terminal lights in the color according to the battery level (P.64).
Charging with AC adapter 3 When using AC Adapter 07 (optional) for charging, do the following procedures. 1 Insert the Type-C plug of the AC adapter horizontally into the USB Type-C jack of the terminal. 2 Unfold the power plug of the AC adapter and insert it into a power outlet. ・ When charging is started with the power on, the charging start sound is heard and the notification LED of the terminal turns on (P.64).
If the installation screen for the terminal's driver software appears on your PC, please wait a moment for the installation to complete. ・ When the confirmation screen of installing software appears on the terminal, tap [SKIP] or [CANCEL]. ・ Charging with a PC To charge the terminal by connecting to a PC, USB cable A to C 02 (optional) is required. 1 Insert a Type-C plug of the USB cable A to C horizontally into the USB Type-C jack of the terminal.
Turning power on/off Turning power on 1 Press and hold the power key for at least 3 second. The terminal vibrates and the lock screen appears after a while. ・ When you first turn on the power and " ようこそ (Welcome)" is displayed, follow the onscreen instructions to make initial settings (P.44). ❖Information If the notification LED flashes in red several times or the low battery icon is displayed when you press the power key with the terminal powered off, the battery level is not sufficient.
Canceling the screen lock The lock screen appears when you turn on the power or press the power key to exit from sleep mode. ・ When Ambient display (P.195) is activated, the lock screen appears by double-tapping the screen or pressing the power key. 1 On the lock screen, swipe (flick) the screen. ❖Information On the lock screen, swipe (flick) or to use the phone or the camera. ・ You can change the screen lock unlocking method (P.191).
2 When the initial settings screen for docomo service appears, tap of "Agree to above"u[NEXT]. ・ 3 Follow the onscreen instructions to make the following settings. - d ACCOUNT settings - Set all docomo services - Review additional apps - "Anything else?" settings When the setup completion screen appears, [FINISH]. Setting up a Google account Google account is an ID/password to use Google services.
Setting up d ACCOUNT d ACCOUNT is an ID/password to use applications or services provided by DOCOMO. With d ACCOUNT, you can use various services more convenient regardless of line type such as LTE, Wi-Fi, etc., or device type such as smartphone, tablet, PC. When you do not set up d ACCOUNT in the initial settings, you can set as follows. 1 From the Home screen, tap [apps folder]u[Settings]u[docomo service/cloud]u[d ACCOUNT setting].
・ ■ The PIN Unlocking Key is written on the subscription form (copy for customer) handed at the subscription in the docomo Shop. If you subscribed other than docomo Shop, you must bring your official identification (such as driver's license), the docomo nano UIM card with you to the nearest docomo Shop or contact the "General Inquiries" on the last page. PIN/Password for screen lock It is a security code for using the screen lock function of the terminal (P.191).
■ PIN Unlock Key (PUK code) The PUK code is an 8-digit number for canceling the locked PIN code. The PUK code cannot be changed by yourself. ・ If you failed to enter PUK code 10 times consecutively, the docomo nano UIM card is locked. Please contact a docomo Shop. Unlocking PIN lock 1 2 3 By entering PIN code when powered on, you can protect from improper use. 1 2 From the Home screen, [apps folder]u[Settings]u[Lock screen & security]u[Advanced]u[SIM card lock]u[Lock SIM card]. Enter PIN codeu[OK].
Basic operations Operations on the touch screen ■ Touch an item such as icon or menu with your finger lightly and release it. ・ Double-tap means tapping twice quickly. Basic operations Using the touch screen Precautions on using touch screen Touch screen is designed for being touched lightly with fingers. Do not push the touch screen hard with a finger or press sharp objects (nail, ballpoint pen, pin, etc.) against the screen. ・ Touching the touch screen may not work in the following cases.
■ Pinch Touch the screen with two fingers and widen (pinch-out) or narrow (pinch-in) the fingers' distance to zoom in/out screen display. Using Side sense Side sense is a feature that supports onehand operations by the side edge of the screen. ・ You can use Side sense in any screen (it may not be available depending on operating condition or displayed function).
Double-tap the side edge of the screen to open the Side sense menu where you can activate applications or turn on/off the functions. Slide up the side edge of the screen to display the Multi-window menu where you can activate the Multi-window (split screen). Also, slide down the side edge of the screen to undo the operation (return to the previous screen).
Using the Side sense menu 1 Double-tap the side edge of the screen ・ ・ The Side sense menu appears. If the explanation appears, tap [START]. You can practice the operations by tapping [TRY SIDE SENSE TUTORIAL]. a d Notifications ・ Open the Notification panel (P.66). e One-handed mode ・ Activate One-handed mode (P.70). f More apps ・ Display more applications that are not currently shown in the application icon list. g Multi-window ・ Switch to the Multi-window menu (P.53).
Using the Multi-window menu You can activate Multi-window (split screen) using Side sense. ・ Operations in the split screen (P.69). 1 Slide up the side edge of the screen ・ ・ The Multi-window menu appears. If the explanation appears, tap [START]. a e b c f d g b Pairs of applications (Combination) ・ Pairs of applications which are predicted by your usage condition are displayed. ・ You can also set to display your desired pairs (P.186). c Exit Multi-window ・ Exit Multi-window (split screen).
Basic key icon operation The following operations can be performed by tapping the key icon shown in the bottom of the screen. Switching portrait or landscape view automatically You can set the screen orientation to switch between landscape and portrait view automatically according to the terminal orientation. 1 Back Home Go back to the previous screen. Or close the menu, the Notification panel, etc. Go to the Home screen. Touch and hold the icon to open the Google Assistant.
If the sound volume is adjusted in "Ring and notification volume" (P.188) in silent mode, the silent mode setting is canceled. ・ You can adjust media sound by dragging up/ down the slider on the volume control bar which appears when the volume key is pressed. Also, tap to open "Sound" in Settings menu where you can change the ringtone, notification sound, alarm, etc. (P.188). ・ Capturing the displayed screen You can capture the currently displayed screen as a still image (Take screenshot).
2 3 [Emergency mode]u[IMPORTANT INFORMATION]uConfirm the important informationu[CLOSE]. Mark "I have read the important information"u[TURN ON]. ・ The terminal restarts. ❖Information To cancel Emergency mode, operate any of the following (The terminal restarts when canceling). - Press and hold the power key for at least 1 second u[Emergency mode]uTap [TURN OFF]. - Drag the status bar downuOpen the notification of emergency mode (P.67)u[Emergency mode is on]u[TURN OFF].
❖Information ❖Information Some tasks may require you to select an application each time, with "JUST ONCE" or "ALWAYS" not displayed on an application selection screen. ・ To deselect the application which is set to "ALWAYS", from the Home screen, tap [apps folder]u[Settings] u[Apps & notifications]u[See all XX apps]uTap an application you want to cancel the settingu [Advanced]u[Open by default]u[CLEAR DEFAULTS].
Character entry Enter characters using the software keyboard (On-screen keyboard) which appears when you tap the character input box in a mail, phonebook, etc. Input method is set to "Gboard" by default. ❖Information To hide software keyboard, tap displayed at the lower left of the screen. ・ For details on Gboard, in the character entry screen, tap u u[Help & feedback] and then refer to Support.
Adding the layout for Japanese keyboard To use the layouts other than 12 keys, add them beforehand. 1 2 3 In the character entry screen, u[Languages]. [Japanese 12 keys]. Put checkmarks to the layoutsu[Done]. Character input method When you tap a key on the software keyboard, candidates list for the entered characters appears. Tap a word to enter from the candidate list, text can be input one after another. Japanese keyboard in 12 keys and QWERTY layouts is explained in this section.
c j Shows characters entered by Multi-tap input (P.62) in the order that is reverse of the regular one. Or undoes character conversion after it is decided. d Moves the cursor to the left. Or changes range of character conversion when it is not yet decided. Swipe (Flick) up/down to move the cursor to the other entry field (the operation may not be available depending on condition). Moves the cursor to the right. Or changes range of character conversion when it is not yet decided.
Using the tool icon Flick input Tap the tool icon on the tool bar to operate as follows. Touch a key of 12 keys to display a character, number, or symbol that are assigned to the key. Flick to the direction of target character to enter the character. ・ On the QWERTY keyboard, flick each key up or down to enter number or symbol. Display the lists of emoji/sicker/ smiley. (Clipboard) Quote characters saved to the clipboard and enter characters. (Settings) Display the Settings screen.
Multi-tap input On the 12 keys keyboard, tap the same key consecutively to enter a character, number, or symbol that are assigned to the key. To enter characters assigned to the same key consecutively, wait until the color of cursor indicating the conversion range is changed (approx. 1 second) and then enter a next character. To enter the next character soon, tap to change the color of cursor.
❖Information To paste a copied or cut character string, touch and hold a position to insertuTap [Paste]. When text is already entered, tap a position to insertu uTap [Paste]. ・ On some applications, these functions may not be available or the editing menu may appear different. Setting character entry ・ Personal dictionary Add words to Personal dictionary beforehand to have them appeared preferentially in the candidate list when entering characters.
Notification LED Notification LED provides information on the terminal status, incoming calls, mail reception, etc.
3G available During International roaming Out of service Connected to Wi-Fi*1 Connected to a Wi-Fi network with no access to the Internet. The Wi-Fi signal is poor.
Alarm is sounding/Alarm is snoozing/ Next alarm exist Playing a truck in Music Watching TV*/Notification of reserved watching Recording TV*/Notification of reserved recording Auto Exit Timer of TV watching is set Creator mode is active Dynamic vibration is worked together USB device is connected/Moisture on USB Type-C jack is detected Screen mirroring in use Wi-Fi open network available STAMINA® mode ON Charging with Battery Care Battery is low (15% or less) Error message/caution message Hidden notification
c Notifications ・ When you tap notification with while the application that is compatible with the split screen is activated, the application can be displayed in the split screen. Or, while the application that is compatible with the split screen is not activated, it activates in the normal screen. ・ Swipe (flick) left or right the notification to clear from the list. However, some notifications may not be cleared.
Quick settings panel Set ON/OFF etc. of each function. 1 Drag the status bar downwards with two fingers. a Silent mode (XXXX)* Location Flashlight Airplane mode STAMINA Hotspot Dolby Atmos b c d e f a Brightness level ・ Adjust the screen brightness. b Quick setting tools ・ Touch and hold it to display the setting screen, etc. depending on function.
Task manager Display recently used applications as thumbnails to confirm, open, switch between, or close them. 1 Swipe (flick) up. Applications are displayed as thumbnails. ・ Swipe (flick) left or right to switch the thumbnails. ・ ❖Information Tap a thumbnail to open or switch the application. However, depending on the displayed thumbnails, the application may not be opened. ・ Swipe (flick) a thumbnail up to delete the thumbnail and exit the application.
❖Information ・ ・ ・ ・ ・ The application windows of the split screen can be displayed up and down in the portrait view and left and right in the landscape view. You can switch the subsequently displayed application. To switch the application, swipe (flick) up (left/right for landscape screen) and select a thumbnail of application. If an application thumbnail you want to display is not displayed, tap to activate the application.
Searching information in the terminal and websites Enter a word in the search box to search the information in the terminal or on the Internet. 1 From the Home screen, tap the Google search widget. 2 Enter a keyword to search. 3 Tap the search suggestion or the software keyboard. ・ ・ Character entry (P.58) The search candidate list appears. of ❖Information Alternatively, from the Home screen, tap [Google]u [Google] to open the "Google" application.
Home screen Switching the home app You can switch the home app of the terminal to "docomo LIVE UX", "Xperia Home" or "Simple Home". ・ "docomo LIVE UX" (P.72) ・ "Xperia Home" (P.80) ・ "Simple Home" (P.82) 1 From the Home screen, [apps folder]u[Settings]u[Apps & notifications]. 2 [Advanced]u[Default apps]u [Home app]. Tap any one of [docomo LIVE UX]/ [Xperia Home]/[Simple Home].
c Home screen layout In Home screen, you can activate applications or use widgets. All applications can be added to the Home screen. ・ Swipe (flick) the Home screen left or right to switch the pages. ・ A dot or number may appear on upper right of application icon or folder when the application has a notification. a b g c d e f a h i Widgets ・ Activate widgets (Google Search). ・ Touch and hold to display the shortcut menu where you can perform certain operations.
Managing the Home screen Moving application icon, etc. 1 In the Home screen, touch and hold an icon you want to move. ・ 2 The shortcut menu appears. 1 To move to the next page, drag it to left/right end of the Home screen. ・ Alternatively, tap [Move] in the shortcut menu and then drag an application icon, etc. ・ The shortcut menu appears. [Remove from Home]. ・ You cannot remove folders in which applications are stored.
Setting Home screen 1 Touch and hold an area of the Home screen where no icons, etc. are displayed. Create folder Add a folder. Wallpaper and Change wallpaper or Kisekae. Kisekae Create widgets Display widgets list. ・ To add a widget to the Home screen, touch and hold a location where you want to locate the widget on the Home screenu [Create widgets]uTap a widget. ・ If there is no available space for a widget, it will be added to empty space. If there is no available space, a page will be added.
Setting Machi-Chara display display 1 2 Touch and hold an area of the Home screen where no icons, etc. are displayedu[Home setting]u [Machi-Chara setting]. / of " キャラ表示 (Show character)". Using Osusume Apps Recommend applications or services according to your usage condition. 1 2 From the Home screen, [Recommends]. 3 Select an application or service. ・ Managing pages 1 Touch and hold an area of the Home screen where no icons, etc. are displayedu[Home screens].
Searching an application It is a function which allows you to search an application in a list sorted by used or installed order, or by an application name. 1 2 3 From the Home screen, ・ 4 . . In "Search app" field, enter an application name. Tap [By most recently used]/[By installation date]/[By app name] to display all applications in a list sorted by the specified order. Select the application. ・ ・ The application activates.
4 Setting the category display [RESTORE]. ・ If you selected "Restore from backup data list", select the data you want to restoreu[Restore]u[RESTORE]. My Magazine My Magazine is a search service for displaying articles in categories you selected. With tendency of articles you read and your profile information, the more you use, the more it comes close to your preference. Also, you can set to enable notifications, or customize My Magazine using location information, your docomo service subscriptions, etc.
my daiz NOW my daiz NOW is a service which delivers convenient information according to your preference or behavior. You can readily check information which is convenient for daily life such as weather, traffic, or gourmet. Displaying my daiz NOW 1 In the left end page of the Home screen, swipe (flick) right. In the right end page of the Home screen, swipe (flick) left. ・ Swipe (flick) up or down to switch cards to be displayed. ・ Swipe (flick) left or right to return to the Home screen.
e Xperia Home screen This section describes the Home screen displayed when the home app is set to "Xperia Home". Dock ・ Locate shortcuts (applications) or folders. They are always displayed even if the page of the Home screen switches. f Widget : Google Search g Wallpaper h Widget : 21:9 Multi-window ・ Tap to display the Multi-window menu (P.53). ❖Information a ・ b g c h d c ・ ・ e f a b Widget : Clock Machi-chara ・ Tap to ask something you want to know through dialog.
Adding folders on the Home screen 2 When the Home screen appears, drag it to anywhere. ・ If a settings screen etc. appears, follow the onscreen instructions. ・ You can put shortcuts etc. added to the Home screen into a folder to organize them. 1 From the Home screen, touch and hold an iconuDrag it over another icon. ❖Information To store an icon into a folder, touch and hold an icon in the Home screenuDrag it over a folder.
Setting Home screen 1 Touch and hold an area of the Home screen where no icons, etc. are displayed. 2 [Home settings]. Show Google™ Set whether to display the Google App App screen in the Home screen. Swipe (flick) the first page right to display it. Notification dots P.182 Add icon to Set whether to add a shortcut Home screen (application) in the Home screen when an application is installed. Allow Home Set whether to allow the Home screen rotation screen or the Application screen to rotate.
Maps Chrome Settings My Apps Tools Media Camera docomo mail +Message Phone Apps* Speed dial docomo phonebook Calendar Clock Calculator Gmail Play Store d メニュー (dmenu) d ポイント (d POINT) Music Album Video & TV SideView TV YouTube P.160 P.124 P.84 P.85 P.110 P.89 P.163 P.90 P.120 P.146 P.145 P.92 P.157 P.142 P.94 P.151 P.94 P.127 P.115 P.115 P.95 ― P.83 * The list of applications such as "Schedule", "Memo", etc. is displayed.
Making a call 1 On the Simple Home screen, select the speed dialu[Call]. ・ Operation during a call (P.100) Using Settings 1 On the Simple Home screen, [Settings]. My profile Sending a message of +Message/ email 1 On the Simple Home screen, select the speed dialu[Send message]/ [Send email]. How to send a message via +Message (P.117) ・ How to send Gmail (P.
Sound Silent/Vibrate mode Ringtone Vibrate on touch Set silent mode. Set ringtone. Set whether to vibrate the terminal when the key icon is tapped. Touch sounds Set whether to emit sound when selecting menu etc. Vibrate when Set whether to vibrate the ringing terminal when receiving a call. Customize Change apps P.86 Home Reorder apps Reset More settings Display the setting menu on the standard Home screen (P.167). Exit Simple Home Change to the standard Home screen.
Changing applications on the Simple Home screen 1 2 3 On the Simple Home screen, [Settings]u[Customize Home]. [Change apps]/[Reorder apps]. Select the applicationuSelect the application to newly display/select the location to move to. ・ 4 Application screen When the home app is set to "Xperia Home", all applications are displayed in the Application screen. ・ Switching the home app (P.72) 1 a c Grayout applications cannot be changed. [OK]. b ❖Information ・ Swipe (flick) the Home screen up.
d Machi-chara ・ Tap to ask something you want to know through dialog. ❖Information A dot or number may appear for the application icon or folder when there is a notification from the application. ・ Adding an application to the Home screen Add shortcuts of application to the Home screen. 1 In the Application screen, touch and hold an application icon to add. ・ ・ 2 The shortcut menu appears. To add applications from a folder, tap a folder and then touch and hold an application.
3 [UNINSTALL]. 4 [OK]. ・ For applications that cannot be uninstalled, "UNINSTALL" is not shown. When "DISABLE" is displayed, you can disable the application (P.181). Editing the Application screen ❖Information To close the rearrange screen, u[Exit], or tap . To take out an application icon from a folder, tap the folderuTouch and hold the application iconuDrag it to a place you want to locate. ・ To rename a folder, tap a folderuTap the folder name, or tap [Unnamed folder].
Application list Preinstalled applications are as follows. The descriptions when the home app is set to "docomo LIVE UX" are explained here. ・ For usage of some applications, separate subscription (Charged) is required. ・ For some applications, you can check functions or operation steps from the help. ・ Design of application icon or folder where the application is stored may be different depending on the home app.
Google Sheets*4 Create, edit and share spreadsheets, as well as view, edit and save Excel files. Google Slides*4 Create, edit and share slide show presentations, as well as view, edit and save PowerPoint files. Settings*2 Configure settings for the terminal. → P.167 Data Copy*2 An application that allows you to transfer data when changing model, back up to/restore from a microSD card. → P.164 データ保管 BOX (Data Storage BOX)*2 An application for using Data Storage BOX.
Hanashite Hon'yaku*2 An application for translating spoken words into the listener's native language. This allows you to enjoy talking with people who speak languages other than your own. File manager*2 You can search data such as still images, videos, music, or downloaded files. → P.207 Photos*4 Play photos and videos. You can back them up to your Google account. My Magazine*3 A search service for displaying articles in the category of your choice. → P.
d 払い (d payment) An application for use "d 払い (d payment)", the payment service provided by DOCOMO. You can do your shopping simply, convenient and with good bargain just by showing a barcode displayed on the application in the target stores. dphoto*2 A service for backing up photos or videos up to 5GB to cloud free of charge, then accessing the backup data from smartphones, tablets or PCs.
Gmail*4 You can use the email services provided by Google and major Internet service providers. → P.120 Google*4 Search information in the terminal and websites by keywords. → P.71 Google Pay*4 An application for managing electronic money or point cards collectively. iD アプリ (iD application)*2 An application for using "iD", electronic money offered by DOCOMO.
TikTok TikTok is a short music video community. You can communicate with others, shoot music video, or post videos. Video & TV SideView*2 Play videos. In addition, view the TV program guide or use your terminal as a remote for Sony televisions or other devices. Xperia ガイド (Xperia guide) Display Xperia 使いこなしガイド (Xperia use guide) to read explanation of the functions or check how to use them.
Phone/Phonebook ・ Making/Receiving a call ・ Making a call/video call 1 2 3 ・ From the Home screen, u Enter a phone numberu . . To make a video call, enter a phone numberu u[Make video call]. ・ Tap to delete the number. ・ When the call is finished, . ❖Information In Step 2, tap without entering a phone number to enter the phone number registered as the latest call in the call history.
Emergency call Emergency call Police call Fire and emergency rescue Coast guard Phone number 110 119 118 ❖Note ・ When calling 110, 119 or 118 from the terminal, tell that you are calling from a mobile phone, and give your phone number and your current location precisely for checking callback from the Emergency call acceptance organization such as police. Also, make a point to call in a stationary position to prevent the call from being dropped.
Entering pause (,)/(;) to send For using services requiring entry of number during a call such as check of the balance of a bank account, reservation of tickets, etc., enter an additional number to a phone number beforehand and make a call. ■ 1 2 3 ■ Making an international call (WORLD CALL) Using 2-second pause (,) WORLD CALL is a service for making international calls, which is available from DOCOMO's mobile phones in Japan. For details on WORLD CALL, refer to NTT DOCOMO website.
■ Receiving a call/video call When a call or video call comes in, the incoming call screen appears. ・ If the screen is on (except on the lock screen) or an application is running, the notification appears at the top of the screen (P.100). 1 Swipe (flick) screen. ・ a To receive a video call, swipe (flick) or the image up. To answer with voice call, swipe (flick) . When the call is finished, ■ Voice call incoming screen a e b c d f .
❖Information ❖Information When "Answer" of "Suguden setting" (P.107) is ON, an incoming call can be answered just by holding up the terminal to your ear. ・ When "Disconnect (Motion/Voice command)" of "Suguden setting" (P.107) is ON, you can disconnect a call by the motion or voice command during a call. ・ Packet communication charge is applied when receiving video call. ・ ・ Answering calls with Answering Machine Even when Answering Machine is not set, you can activate Answering Machine manually.
Receiving a phone/video call when an application is running If the screen is turned on (except on the lock screen) or an application is running when a call comes in, the notification appears in the upper screen. 1 2 [ANSWER]. You can start a voice conversation. To accept a video call, tap [VIDEO CALL]. ・ To decline a call, tap [DECLINE]. ・ Tap the upper part of displayed notification to open the incoming call screen.
■ Screen displayed during a video call While on a video call, the other party's image and your image are displayed and the control icons are hidden. Tap the screen to show the control icons. c i o j d l m n h a b c Photo/image set in a contact Name, phone number, etc. of the other party Sound quality of VoLTE call ・ (super high sound quality) is displayed during calls in VoLTE (HD+), and (high sound quality) is displayed during calls in VoLTE (HD).
❖Information To hold/add a call, "Call waiting" subscription is required (P.105). ・ The notification icon appears on the status bar while dialing, incoming, calling or holding. Even if you have switched to the other screen such as the Home screen, returning to the calling screen is available by dragging the status bar down and then tap the calling notification. ・ To answer a video call from the other party during a call, swipe (flick) or the image up.
c Phone number/name ・ Tap to open the menu of "Call", "Video call", "Create new contact", "Add to a contact", "Send a message", "Number blocking", and "Call details". ・ Touch and hold to display the menu of "Copy number", "Edit number before call", "Add prefix", "Number blocking" and "Delete". d An image set to a contact etc. ・ Tap to display the profile screen of the Contacts.
2 Displaying missed calls When you have missed calls, the status bar. 1 2 appears in Drag the status bar downwards. [Missed call]. ❖Information When there is a missed call, you can make a call or send message to the caller of the missed call from "CALL BACK"/"MESSAGE" below "Missed call" in the Notification panel. For multiple missed calls, number of calls appears below "Missed call".
・ To delete a message of Answering Machine, tap a messageu . To delete a message of Answering Machine, touch and hold a messageu[SELECT ALL]u u[DELETE]. ❖Information ・ When a notification of Answering Machine appears on the lock screen, double-tap and cancel the lock screen to open the list of Answering Machine message. Checking messages in Answering Machine via Phone application To check messages in Answering Machine via Phone application, operate as follows. 1 From the Home screen, 2 " " tab.
Switch the voice guidance to English or Japanese. Set to operate Voice Mail Service or Call forwarding Service using land-line phone, public phone or DOCOMO mobile phone, etc. Public mode While the terminal is OFF or (power OFF) in Airplane mode, a setting guidance message indicating that the receiver cannot answer the call is heard on the caller’s terminal and then the call ends. Roaming settings Set to reject incoming calls overseas or use roaming guidance (P.222). Answering Machine P.
Suguden setting Make settings for "Suguden" which allows you to operate phone with the motions and the voice command. 1 2 From the Home screen, u . [Settings]u[Calls]u[Suguden setting]. Answer calls by placing the terminal to your ear. Mute (Hold) Turn off the mouthpiece/microphone of the terminal (Mute) by detaching the terminal from your ear after saying the word including a Mute (Hold) keyword while talking. Disconnect End a call by motion or voice (Motion/ command.
Notes on using Suguden Suguden allows you to operate the phone by the motions of the terminal or the voice commands, but the function does not work properly in the following situations.
Functions of Suguden ● Disconnect (Motion) ・ When the motion is performed, a call will be disconnected even in the following cases. - When the other party puts the call on hold - When the Answering Machine is running (playing the answering message/recording a message) ・ When disconnecting a call with Suguden motion, it may not react (disconnect) if the speed of motion for placing the terminal facing down is fast. In that case, try the motion slowly to react (disconnect).
● Dialing A Suguden call can be made from the Home screen or the lock screen (when "Screen lock" (P.191) is set to "None" or "Swipe"). ● Mute, Reject When "Mute, Reject" is set to ON, the feature set in "Mute, Reject" may be performed when you shake the terminal strongly even just once while a call is incoming since the terminal misrecognizes that the motion is performed. ● Disable Suguden during roaming Suguden is disabled automatically in overseas by default setting.
■ Contacts screen On the Contacts screen, you can view names of contacts etc. You can set a photo or image to a contact, and display contacts by group. a b c d Managing phonebook Adding a new contact 1 From the Home screen, [apps folder]u[docomo phonebook]u ・ 2 On the profile edit screen, enter necessary information such as name. ・ 3 e a b c d Menu Photo/image set in a contact Search Name registered in a contact ・ Tap to display the profile screen.
Making a call/video call from the phonebook 1 2 From the Home screen, [apps folder]u[docomo phonebook]u Select a contact. On the profile screen, tap . ・ To make a video call, tap . Editing a contact 1 2 3 4 From the Home screen, [apps folder]u[docomo phonebook]u Select a contact to edit. On the profile screen, . ・ When you join the contacts, select a contact to edit. Select a required item and edit. [SAVE].
■ Contacts screen My info Cloud menu* d ACCOUNT setting International use setting Service quality improvement Accounts Default account for new contacts Contacts to display Name format Phonetic name Import Export Specified number rejection ■ Display your own profile and you can edit it (P.114). Display cloud menu. Set a d ACCOUNT to use docomo services via Wi-Fi. Set for using docomo phonebook overseas. Set whether to send service quality improvement to DOCOMO.
Checking my profile and editing information 1 2 3 From the Home screen, [apps folder]u[docomo phonebook]u u[Settings]u[My info]. uEnter required items such as name. [SAVE]. ・ If you logged in to the cloud, follow the onscreen instructions. Importing/Exporting/Sharing phonebook entries Phonebook entries can be imported from a microSD card or docomo nano UIM card, or exported to a microSD card. This is useful, for example, when you want to move the contact information to another phone.
Mail/Web browser docomo mail Send/receive mails using DOCOMO mail address (@docomo.ne.jp). Data can be easily transferred when changing models or restored when you have lost the terminal since sent and received mails are saved on the docomo mail server. Also, your d ACCOUNT allows you to use the same email address to send, receive, and view email on several devices, such as tablets and computers. For details of docomo mail, refer to NTT DOCOMO website. https://www.nttdocomo.co.
■ b Contact list screen a b c d My profile ・ Your own contact is displayed. Tap to display/edit my profile. c Favorite contact ・ Your favorite contacts are displayed in the upper part of contact list, below My profile. d e f ■ Message list screen i g h j a It is an icon indicating he/she is a user of +Message. You can exchange group messages, photos, stamps, etc. among the contacts with this icon displayed. e Contacts ・ Tap to check detail of contact.
Sending a message 1 From the Home screen, [+Message]. 2 u u[New message]/[New group message]. ・ 3 4 ■ ab Group message is a function which allows multiple +Message users ( icon displayed in the contact) to exchange messages among them. g Select a recipient. c d To send a recipient who is not registered to Contacts, tap [Enter name and phone number] and input a phone number directly. ・ For group message, select multiple recipients and then tap [OK].
c : Activate camera Touch and hold to shoot a photo and then you can send it consecutively. d : Display a sharing menu to send photos, stamps, location information, etc. ・ While the sharing menu is displayed, you can use functions such as sending images or recording voice. e Message entry field ・ You can enter a message. f : Switch to the stamp selection screen g : Send an entered message.
・ Before receiving messages, activate "+Message" application and agree with the +Message terms of use, etc. even if you were a +Message user of the previous terminal before model change or MNP transfer. Reading a message Deleting a message 1 From the Home screen, [+Message]. 2 3 uSelect a thread. Sent/received messages are displayed in thread by recipient/sender. 1 2 Only messages on the terminal can be deleted. You cannot delete messages on the recipient device.
Changing the settings of +Message 1 2 From the Home screen, [+Message]. u[MyPage]u[Settings]. Set for messages, back up/restore, etc. Photos and Set for file attachment, etc. such as videos photos or videos when sending/ receiving. Screen display Set the theme color, or background of message screen. Notification Set notifications. Privacy Set a passcode, block list, etc. Others Set Transfer user information, Initialize +Message service, etc.
(Send). 5 Early Warning "Area Mail" ❖Information To attach a file, when creating a Gmail, tap [Attach file] and select the file. ・ u Refreshing Gmail 1 2 From the Home screen, [Google]u [Gmail]. On the Inbox, flick the screen down. ・ This refreshes the Inbox. Area Mail is a service which allows you to receive earthquake early warning or tsunami warning, emergency warning related to weather etc.
・ Area Mail (earthquake early warning) that could not be received cannot be received later. Area Mail (tsunami warning, emergency warning related to weather etc., disaster/ evacuation information) can be resent. In the case you could not receive it, you can receive it again. Checking received Area Mail later 1 From the Home screen, [apps folder]u[Disaster kit]. 2 3 [Early Warning "Area Mail"]. Select an Area Mail from the Area Mail list.
Setting Early Warning "Area Mail" Set whether to receive Area Mail, or set operations when receiving Area Mail. 1 From the Home screen, [apps folder]u[Disaster kit]. 2 3 [Early Warning "Area Mail"]. u[Settings]. Receive setting Emergency alert history Vibrate Alert reminder sound Set whether to receive Area Mail. Display a list of received Area Mail. Set vibration of incoming Area Mail. Set whether to remind of alert after Area Mail is received.
❖Information Chrome ・ Use "Chrome" application to view websites like on a PC. You can use "Chrome" application via packet communication and Wi-Fi network with the terminal. Viewing websites 1 2 3 When address entry field is not displayed, flick down the screen to display. Enter a website address or keyword to search. While appears in the address entry field, tap to enter a search word in voice sound. ・ As you enter an address or characters, retrieved website list appears.
Changing tabs 1 2 Changing Chrome settings . ・ Currently opened tabs are displayed with thumbnails in a list. Tap the tab. ❖Information ・ A number in the icon explained in Step 1 varies by the number of tabs that are opened. Closing a tab 1 uTap From the Home screen, tap u[Settings]. Sign in to Chrome Search engine Passwords Payment methods of tab you want to close. ・ 1 2 Alternatively, flick a tab left or right to close it.
Downloads About Chrome Set a saving location etc. for downloading. Check the versions of Chrome etc. Operating links Touch and hold a link or an image in a web page to copy the URL or download the image. ❖Information In some website, downloading of files etc. may not be available. ・ Managing bookmarks and history You can check history, save bookmarks, etc. Bookmarking a website 1 2 From the Home screen, u Display a website to bookmark. u .
Camera/Album Camera All still pictures or videos that you capture on the terminal are stored into the internal storage or a microSD card. ・ To save still pictures and videos to a microSD card, insert one and specify it as the destination where you want to save them, before using the camera (P.136). ・ When the terminal temperature becomes high, the camera may not activate or may stop.
❖Information d You can quickly activate the camera with any one of the following operations. - Press and hold the camera key for at least 1 second (P.136) - On the lock screen, swipe (flick) ・ The camera ends when a certain time has elapsed with no operations on the shooting screen. ・ Shooting screen a b c d e f g h i j k a l m n o Display area for status icons ・ When the settings such as Smile Shutter (P.135) and Save location (Geo-tagging) are set, the icons are displayed here.
❖Information ・ ・ ・ ・ ・ ・ ・ The display and operations differ depending on the capturing mode etc. To adjust magnification in detail, do as follows. - Drag the zoom indicator up or down (for portrait view, left or right) - Set "Use Volume key as" (P.136) to "Zoom" and operate with the Volume key - Pinch-in/-out the screen Switch to triple-lens or zoom is not available when shooting with the front camera or depending on the capturing mode. Zoom is not available when shooting in wide angle.
■ Main capturing mode and Still image size/Video size Capturing Still image size/Video size mode Front camera : PHOTO/ Camera : 4:3 (12MP) 4:3 (8MP) Manual 16:9 (9MP) 16:9 (6MP) 1:1 (9MP) 1:1 (6MP) Front video camera : VIDEO Video camera : Full HD 4K 1080 × 1080 (1:1) Full HD HD Full HD (60 fps) 1080 × 1080 (1:1) HD Slow HD motion ❖Information For shooting in "Slow motion" mode, sufficient brightness is needed because of its high-shutter speed.
■ Shooting still pictures ■ 1 2 3 ■ Shooting with the shutter icon From the Home screen, [Camera]. Swipe (flick) the screen to display "PHOTO" mode shooting screen. Tap the shutter icon ( ・ 1 2 Shooting with the camera key From the Home screen, [Camera]. Swipe (flick) the screen to display "PHOTO" mode shooting screen.
■ Shooting with Hand Shutter When shooting with the front camera, turn your palm toward the camera to shoot automatically. You can take picture of yourself without operations such as tapping an icon etc. ・ Hand Shutter is available for shooting with front camera in "PHOTO" and "Manual" modes. It is not available for "Portrait selfie" mode. ・ Setting "Auto capturing" (P.135) to "Hand Shutter" is required.
■ 1 2 3 4 ■ Shooting with the start/stop icon From the Home screen, [Camera]. Swipe (flick) the screen to display the shooting screen in "VIDEO" mode. Tap the start shooting icon ( Tap the stop icon ( ). ・ Tap the pause/start shooting icon ( ) to pause/resume shooting. 1 2 From the Home screen, [Camera]. Swipe (flick) the screen to display the shooting screen in "VIDEO" mode. 3 Tap the shooting screen. 1 2 ・ Press the camera key again to stop shooting. Shooting with the volume key ・ ).
■ Changing settings when shooting Set still image size. The larger the size of a photo, the larger its file size. Changing from the menu ■ The displayed icons or operations vary by the capturing mode, camera/front camera, or lens type. ・ Some settings cannot be used in combination with one another. ■ 3 From the Home screen, [Camera]. uSelect a setting item. ・ For some capturing modes, tap the shooting screen to set. on ■ ■ Self-timer : "PHOTO"*1*3 Set the number of seconds for the selftimer.
■ Metering : "Manual"*1 Measure the brightness on the shooting screen to determine a well-balanced exposure automatically. Face Detects faces, measures the brightness, and adjusts exposure to set the appropriate brightness level. Multi Divides the screen into multiple areas, measures the brightness, and adjusts exposure so that the overall brightness is balanced. Center Put emphasis at the center of the shooting screen and measure photometry at whole view finder to adjust the exposure.
■ Save location Set whether to tag still pictures/videos location information (geotag) for the shooting spot. ・ Location information is added when shooting if appeared on the shooting screen. ・ appears while acquiring location information. To pictures shot while acquiring location information, geotags are not added. ■ ■ ■ Set whether to display a preview right after shooting. If you set "Only front camera", a preview appears only when you shoot with the front camera.
■ ■ Reset settings Changing settings using icons Reset the camera settings Reset the setting of "PHOTO", "VIDEO", "Manual", and "Slow motion" modes. Tap the icon displayed on the shooting screen to change the setting. ・ The displayed icons or operations vary by the capturing mode, camera/front camera, or lens type. ・ Some settings cannot be used in combination with one another. Preview : "Creative effect" Set whether to display the preview screen or the edit screen immediately after shooting.
■ HDR : "VIDEO", "Manual" ■ Set whether to shoot photos having natural impression in a state closer to that seen with the eye even when there is contrast in brightness. On Off ・ To play back as a HDR video with the other device etc. after shot in "VIDEO" mode, a compatible device and service are required. ・ When "HDR" is set to On in "Manual" mode, ISO is automatically set to "AUTO". ■ Aspect ratio : "PHOTO", "Manual", "Portrait selfie" Set aspect ratio of photo to shoot.
■ ■ Pupil AF : "PHOTO", "Manual" ISO When a face of object is detected, the camera automatically focuses on the pupil and a green focus frame appears. Tap to change pupil to be focused. Tap anywhere other than face to cancel Pupil AF and display the auto focus frame. is displayed on the screen while Pupil AF is activated. When you tap it to turn to , the pupil AF is canceled and the focus changes to a face position. uTap a point on the bar or drag the marker.
■ Portrait selfie advanced setting : "Portrait selfie" Set Slender face, Bokeh, etc. Mirror Set whether to save mirror image. On Off Touch capture Set whether to use touch capture. On Off Slender face To set profile correction etc., tap the iconu Tap the bar, or drag the marker. Eye enlargement Skin brightness Soft skin Bokeh ■ Switch of effect : "Creative effect" Tap to switch a type of effect. You can make various settings according to the type of effect.
f Clip/still image in project ・ Tap to play a clip/still image shot in the ongoing project. ・ Tap while playing clip to trim the footage or save still images ([Photo Capture]u[Grab]). g All files ・ Display all clips/still images in the ongoing project. ・ Tap to open a list of projects. ・ Tap to return to the Cinema Pro screen. h Status ❖Information ・ You can adjust the parameters whose characters are displayed in orange color. Tap it and select the setting or valueu[Set].
e f File shot with Predictive Capture Slow motion file ・ is displayed for a file before editing when it is shot with "Slow motion". g 4K video file Album View/play photos or videos. Displaying photos/videos 1 ■ From the Home screen, [Album]. ・ Images are displayed in a list in chronological order. Image list screen a ❖Information ・ ・ ・ a ・ ・ b f c d e g ・ Depending on the number of saved images, it may take some times to load images.
e Viewing a photo 1 From the Home screen, [Album] uTap an image. ・ ・ ■ The photo is played. Tap the screen to show/hide information such as shooting date or icons such as menu. Photo viewing screen a e Menu ・ You can set Play slideshow, Use as, Rotate, Details, etc. ・ To show the date setting of photo, tap u [Details]u . f Delete g Edit photos ❖Information To zoom in/out image display, pinch out/in or double-tap on the photo viewing screen.
e Playing a video 1 From the Home screen, [Album] uTap a video. ・ ・ 2 ■ A preview screen appears. Tap the screen to show/hide information such as shooting date or icons such as menu. . ・ ・ Video is played. To show/hide menu etc., tap the playback screen while playing/pausing a video. Show/Hide operation icons ・ Show/hide operation icons such as 10 seconds fast forward or the setting icon for repeat play. f Progress bar ・ Tap on the bar or drag a marker left or right to change a playback position.
Apps d メニュー (dmenu) In dmenu, you can easily access sites recommended by DOCOMO or convenient applications. 1 From the Home screen, [d メニュー (dmenu)]. ・ Browser is activated, "d メニュー (dmenu)" appears. dmarket dmarket provides a variety of services, offering digital content, such as music, videos, and books, and giving you access to a shopping site, travel booking site, and other sites. 1 From the Home screen, [dmarket]. ❖Information ・ For details on dmarket, refer to the following website. https://d.
Installing an application Play Store Use Google Play to install useful applications or fun games to the terminal. ・ To use Google Play, you need to set up a Google account (P.45). ・ For details on purchasing applications, returning your purchases, or requesting a refund, see Google Play Help. ・ Once you accept the installation of an application, you will be held responsible for its use. Be careful especially about applications which access many functions or large amount of data.
Osaifu-Keitai This function allows you to use " おサイフケー タイ対応サービス (Osaifu-Keitai compatible service)" by which you can pay money or use as a point card. You can save electronic money and points to an IC card of the terminal and a docomo nano UIM card to check the balance or points on the screen. Also, you can prevent from being used without asking in case of theft or loss by locking Osaifu-Keitai function. For details on Osaifu-Keitai, see NTT DOCOMO website.
Notes on holding over the device Please note the following when holding the terminal over an IC card reader or NFC module equipped device. Using "Osaifu-Keitai compatible service" To use the Osaifu-Keitai compatible service, set services in the Osaifu-Keitai application. Turn on NFC function in advance (P.212). 1 From the Home screen, [apps folder]u[Osaifu-Keitai]. ・ Bring mark close to the device slowly without hitting it strongly. ・ Hold mark over the center of the device in parallel.
The Osaifu-Keitai compatible application performs communication which is necessary for providing the Osaifu-Keitai service in the background regardless of "STAMINA mode" (P.183) or the setting of "Data Saver" (P.173). ・ When the power of the terminal is turned on, the terminal is restarted, or the software is updated, unlock the screen lock and then hold over the reader to use the Osaifu-Keitai service.
3 Enter any passwordu[OK]. ・ The password is required for canceling the lock. Take notes etc. to avoid forgetting it. ❖Information Note that you cannot cancel "Osaifu-Keitai lock (UIM card)" if the battery runs out while "Osaifu-Keitai lock (UIM card)" is set. Be careful about remaining battery level. For canceling "Osaifu-Keitai lock (UIM card)", charge the terminal before canceling. ・ "Osaifu-Keitai lock (UIM card)" password is not be deleted even if you reset the terminal.
TV TV is an application with which you can switch between Full seg and 1 seg and watch according to the air wave reception condition. In addition, since the data broadcasting can be received with images and sounds, interactive service using communication function of mobile devices and receiving detailed information are available. With Full seg, you can watch a terrestrial digital TV broadcasting service in high-vision quality.
Tunnel, underground or far back from a building where airwaves are weak or do not reach Changing the direction of the TV antenna cable or moving to another location may improve signal reception. ・ TV antenna cable To watch TV with the terminal, use the supplied 3.5mm Earphone jack conversion/ TV Antenna cable SO01 (P.215). Watching TV From the Home screen, [apps folder]u[TV]. 1 ・ ■ When using for the first time, make channel settings according to the onscreen instructions (P.155).
h Channel, broadcasting station and program information i Reception signal level j Start shooting k Channel selection key ・ Touch and hold / to search available channels. ・ Tap to to display the channel list. l Data broadcasting ・ On the 1 seg watching screen, data broadcasting can be viewed only in the portrait screen.
You can set TV watching screen, data broadcasting and channel. Using menu Reserve recording/viewing TV program or make each setting. 1 2 From the Home screen, [apps folder]u[TV]. . ・ Alternatively, slide the left end of the TV watching screen right to display the menu. Program guide Program detail info Display program information of the channel currently watched. ・ Select a TV program to show the detail information.
Settings Superimpose Set whether to display setting superimpose for Full seg or select a superimpose language. Data Set whether to use the Broadcasting location information or the settings terminal information, clear the broadcasting station memory, or postal code. Auto Exit Make a timer setting to end Timer TV watching. Device ID of Display device ID of receiver. receiver Notes Display information before use. Display subtitles Set ON/OFF of subtitles.
3 Tap the broadcasting station to change the remote control numberuTouch and hold the image. 4 Touch and hold the number of remote control to set to. 5 [YES]. ・ If you select a number of remote control which is already assigned to another broadcasting station, [Overwrite registered channel]uTap [YES]. ❖Information To delete a set broadcasting station, touch and hold a broadcasting station in Step 3u[Delete channel]u Tap [YES].
Reserving recording/viewing of TV programs You can reserve recording or viewing of TV programs. 1 2 3 4 5 Music Use Music to play back music stored in the internal storage or a microSD card. ・ File formats of playable data (P.245) From the Home screen, [apps folder]u[TV]. u[Reserve Recording/Viewing] u[New reservation] [Viewing reservation]/[Recording reservation] Set Title, TV station, Start time, End time, etc.
When is displayed at the upper right of screen, music can be played with Google Cast devices. Tap and then follow the onscreen instructions to connect. To play music data on a Google Cast device, connect the terminal to the same Wi-Fi network as the one the Google Cast device connected in advance (P.168). ・ Location services Your current location can be positioned using GPS, Wi-Fi, or mobile network. GPS function Sharing music Send music data via Bluetooth or mail attachment.
You cannot use the terminal as a navigation device for an aircraft, vehicle, and person. Note that DOCOMO shall have no liabilities whatsoever even if you suffer damage or loss while performing a navigation using the location information. ・ You cannot use the terminal as a highaccuracy measurement GPS. Note that DOCOMO shall have no liabilities whatsoever even if you suffer damage or loss due to a deviation of the location information. ・ Global Positioning System (GPS) is created and managed by U.S.
Activating GPS/Location services You can position your current location using GPS, Wi-Fi, and information sent from mobile network base stations. 1 2 3 From the Home screen, [apps folder]u[Settings]u[Lock screen & security]u[Location]. of "Use location". Read the notes on location information and tap [AGREE]. Finding the current location on the map You can detect your current location using location information service. ・ To detect current location, enable "Use location" (P.160) beforehand.
Searching for a location 1 2 3 Schedule From the Home screen, [Google] u[Maps]. Fill out the search bar. Tap on the software keyboard. 1 When candidates are appeared, tap a target destination. 2 ・ Displaying schedule Displaying information Display information such as traffic information etc. on the map. 1 2 From the Home screen, [Google] u[Maps]. uSelect information to display. Navigating You can receive detailed guides for your destination. 1 From the Home screen, [Google] u[Maps].
Creating schedule event 1 2 3 From the Home screen, [apps folder]u[Schedule]. uEnter the item. ・ For setting alarms, tap [Display input option]. [Save]. ❖Information ・ When an alarm of event is set, appears on the status bar at the set time. Drag the status bar downwardsuTap [It's time] to display details of the event. Displaying events of Schedule 1 When a search criteria is set, specified data can be displayed. 1 From the Home screen, [apps folder]u[Schedule]. 2 3 u[Conditions].
Stopping alarm Clock Use alarm, world clock, stop watch and timer. Setting an alarm 1 2 From the Home screen, [apps folder]u[Clock]u"Alarm" tab. uSet a timeu[OK]. ・ ・ In the alarm screen, tap u[Settings] to set alarm length or alarm volume. ・ To edit an alarm time, in the alarm screen, tap the time. ・ To delete an alarm time, in the alarm screen, tap u[Delete]. ・ Enabling/Disabling alarm 2 From the Home screen, [apps folder]u[Clock]u"Alarm" tab. / off.
Using Timer 1 From the Home screen, [apps folder]u[Clock]u"Timer" tab. 2 3 4 Tap numbers to set a time. . To stop the timer sound, tap docomo Data Copy . ❖Information When the screen is locked, in Step 4, tap . You can set Timer sound, etc., in the timer screen, tap u[Settings]. ・ ・ Using Stopwatch 1 2 3 From the Home screen, [apps folder]u[Clock]u"Stopwatch" tab. . . ・ ・ To resume it, tap . Tap [Reset] to delete the measurement result.
・ For the supported models or detailed use method, refer to NTT DOCOMO website. Backing up/Restoring You can transfer or back up/restore the data such as phonebook contacts or images using a microSD card. ・ Do not remove the microSD card or turn off the terminal during backup or restoring. The data may be damaged. ・ If phonebook item titles (e.g. phone number etc.) in the other device are different from those in the terminal, they may be changed or deleted.
Restoring Copying contacts to docomo account Restore the data such as phonebook entries or media files backed up to the microSD card to the terminal. Copy contacts registered to your Google account to the docomo account. 1 From the Home screen, [apps folder]u[Data Copy]u[Backup & Restore]. 2 3 [Restore]. Tap [Select] on data type to restore uMark data to restoreu[Select]. ・ 4 Tap [Select latest data] to select the latest data for each data type.
Viewing the Settings menu 1 From the Home screen, [apps folder]u[Settings]. Network & internet Device connection Appearance Apps & notifications Battery Display Sound Call Storage Lock screen & security docomo service/cloud Accounts Xperia Assist Accessibility Digital Wellbeing Google System P.167 P.178 P.179 P.179 P.183 P.184 P.187 P.105 P.189 P.190 P.196 P.197 P.198 P.199 P.200 P.201 P.201 ❖Information ・ You can a search setting item, etc.
Wi-Fi With Wi-Fi function, you can connect to an access point for your home, company network or public wireless LAN services to use mail and Internet. ■ Reception interference caused by Bluetooth devices Wireless LAN (IEEE802.11b/g/n) and the Bluetooth devices use the same frequency band (2.4GHz). If you use the terminal near Bluetooth devices, reception interference may occur or the communications speed may lower. Also, you may hear noise or have a connection problem.
❖Information Adding a Wi-Fi network manually Depending on your usage environment, the connection speed may be decreased, or Wi-Fi may not be available. ・ When the terminal is connected to Wi-Fi network successfully, "Connected" appears. If a different message is displayed, make sure of the password (security key). When the connection is not established even if you enter a correct password (security key), the correct IP address may not have been acquired. Check the signal status and reconnect.
Setting up Wi-Fi 1 From the Home screen, [apps folder]u[Settings]u[Network & internet]u[Wi-Fi]u[Wi-Fi preferences]. Turn on Wi-Fi automatically Open network notification Auto-connect* Set whether to automatically turn on Wi-Fi when the terminal detects a saved high quality Wi-Fi network, and connect to it. Set whether to notify you when a high quality Wi-Fi open network is detected. Set whether to automatically connect to saved Wi-Fi network when it is detected for each Wi-Fi network.
Mobile network 1 From the Home screen, [apps folder]u[Settings]u[Network & internet]u[Mobile network]. Mobile data Data roaming App data usage Enable VoLTE* Preferred network type* Carrier video calling* Automatically select network* Network* Access Point Names* P.171 P.218 Check mobile data usage of each application for the usage cycle which is specified in "App data usage cycle" (P.174). ・ To set restriction of background mobile data communication, etc.
■ 1 Checking the access point in use From the Home screen, [apps folder]u[Settings]u[Network & internet]u[Mobile network]u [Advanced]u[Access Point Names]. ・ ■ 1 2 3 4 5 6 The radio button on the right of current access point is marked. Setting an access point additionally From the Home screen, [apps folder]u[Settings]u[Network & internet]u[Mobile network]u [Advanced]u[Access Point Names]. . ・ ❖Information Do not change the MCC/MNC.
Data usage Check the data usage or make settings for mobile data communication. 1 From the Home screen, [apps folder]u[Settings]u[Network & internet]u[Data usage]. Amount of usage mobile data for the usage cycle which is specified in "App data usage cycle" (P.174) is displayed. Data Saver P.173 Mobile data Enabling/Disabling mobile data communication (P.171). App data usage Check mobile data usage of each application for the usage cycle which is specified in "App data usage cycle" (P.174).
2 [Data warning & limit] App data usage cycle Set data warning Data warning Set data limit Data limit Set a usage cycle (measuring period) for amount of mobile data usage. Set whether to display the notification when the mobile data usage reaches to the set warning volume. Set a warning volume of mobile data usage. Set whether to temporarily suspend the mobile data communication when the mobile data usage reaches to the limit volume. Set a limit volume of mobile data usage.
❖Information If the portable hotspot starts while connecting to Wi-Fi network, Wi-Fi connection is disconnected. Wi-Fi network is automatically connected when the portable hotspot ends. ・ To connect a wireless LAN device via NFC, tap [Onetouch portable hotspot] in Step 2. ・ If you operate from [Portable hotspot] in Step 2u [Power save] to enable power saving, the portable hotspot will turn off automatically when the specified time has passed without connecting to wireless LAN devices.
❖Information System requirements (OS) for USB tethering are as follows. - Microsoft Windows 10 - Microsoft Windows 8.1 - Microsoft Windows 7 ・ In USB tethering, you cannot access your terminal's internal storage or microSD card from the PC. Airplane mode ・ Enabling Bluetooth tethering Up to 4 Bluetooth devices can be connected to the Internet. 1 2 From the Home screen, [apps folder]u[Settings]u[Network & internet]u[Hotspot & tethering]. of "Bluetooth tethering".
Connecting to a VPN (Virtual Private Network) Use Virtual Private Network (VPN) to connect to the information in a protected local network such as companies, schools or other facilities from outside. Connecting to a VPN 1 2 3 Adding a VPN 1 2 From the Home screen, [apps folder]u[Settings]u[Network & internet]u[Advanced]u[VPN]. . ・ When the note appears, follow the onscreen instructions to set unlocking method of screen lock or fingerprints (P.191, P.193).
Device connection 1 From the Home screen, [apps folder]u[Settings]u[Device connection]. Pair new device Previously connected devices Connection preferences P.178 When the terminal is connected to a device, the device information may be displayed above "Pair new device". Tap it to change the connection method, cancel connection, etc. Setting Connection preferences 1 From the Home screen, [apps folder]u[Settings]u[Device connection]u[Connection preferences].
Printing Install print service applications. * According to usage condition, image or sound may be interrupted or stopped. Covering around the WiFi antenna area with your hand may affect the quality of transferring images. Apps & notifications 1 From the Home screen, [apps folder]u[Settings]u[Apps & notifications]. A list of recently launched applications is displayed. Tap an application to display the app info. See all XX apps P.
Open by default* App info Manage and uninstall installed applications. Also, change the settings of notification or permission for each application, or delete the data or cache. Managing applications 1 From the Home screen, [apps folder]u[Settings]u[Apps & notifications]u[See all XX apps]. Tap u[Show system] to show all applications. ・ To select the displaying option, tap [All apps] in the upper part of the screen. ・ 2 version* * Appeared when [Advanced] is tapped.
2 3 Tap the application to uninstall. [UNINSTALL]u[OK]. ❖Information Some pre-installed applications may not be uninstalled. You can disable some applications or services which cannot be uninstalled (P.181). ・ Applications downloaded from Google Play are recommended to be uninstalled from the Google Play screen (P.146). ・ When in Step 3, u[UNINSTALL UPDATES] is displayed, tap it to restore the application to the default.
Configure notifications Set the notifications of each application or function. Also, you can change the operation of the notification LED or the setting of notifications for the lock screen. 1 From the Home screen, [apps folder]u[Settings]u[Apps & notifications]u[Advanced]u [Configure notifications]. Show notifications Allow notification dots Use LED light to show incoming notifications Notification sound Set whether to show notification details on the lock screen.
Recently sent See all from last 7 days A list of applications whose notifications are recently displayed is displayed and you can set ON/OFF of each notification setting. A list of applications whose notifications are displayed for last 7 days is displayed and you can set ON/OFF of each notification setting. * Displayed items vary depending on the settings of "Screen lock" (P.191). Battery 1 From the Home screen, [apps folder]u[Settings]u[Battery].
Restrict use of battery for applications whose usage frequency is low to reduce the battery consumption. Device usage*2 Displays the elapsed time from the last full charge to the present time and the time used by the screen. Use since last full Displays applications or functions charge*2 which use the battery since the last full charge. Adaptive Battery*2 *1 The display may differ depending on usage condition. *2 Appeared when [Advanced] is tapped.
Enlarge/reduce of the size of the icon etc. displayed in the screen. Auto-rotate screen P.54 Side sense* P.186 One-handed mode* P.70 Cover selection* Set to correct the screen brightness or turn off the screen according to the cover (commercially available) you use. Smart backlight control* Set the screen not to turn off when you hold the terminal in your hand but touch operation is not performed.
Adjusting the screen brightness 1 2 From the Home screen, [apps folder]u[Settings]u[Display]u [Brightness level]. Tap the slider at a position you want to set, or drag it left or right. Setting Side sense Make settings for using Side sense feature (P.50). 1 2 From the Home screen, [apps folder]u[Settings]u[Display]u [Advanced]u[Side sense]. . TRY SIDE SENSE TUTORIAL Side sense menu Multi-window menu Practice the operations of Side sense. Set applications to be displayed in the Side sense menu.
Gestures Enable Side sense on lock screen Select apps that work with gestures Improve prediction accuracy Assign an action to double-tapping/sliding up/sliding down the side edge of the screen (Gesture operation). Set whether to display the Side sense menu on the lock screen. Set whether to allow use of Side sense for each application. Set whether to allow Xperia Intelligence engine to use location information for improving the application predictability in Side sense.
Dynamic Vibration In-call volume Ring and notification volume Alarm volume Also vibrate for calls Add vibration when playing back movie, video, or music to enhance realistic sensation. You can change the strength of vibration with the volume control bar displayed when the volume key is tapped while playing back with a compatible application. ・ When Media volume is mute, Dynamic Vibration is not available. P.188 Set whether to vibrate the terminal when receiving a call. P.182 P.
Setting the ringtone/ notification sound/alarm ringtone 1 From the Home screen, [apps folder]u[Settings]u[Sound]. 2 Tap any one of [Phone ringtone]/ [Notification sound]/[Default alarm ringtone]. 3 Select a sound optionu[OK]. ❖Information To set a ringtone other than ringtone, notification sound, or alarm ringtone stored by default, tap [Add ringtone] in Step 3. ・ A ringtone or notification sound selected in Step 3 sounds in the volume set in "Ring and notification volume".
❖Information To increase available memory of the internal storage by selecting files and applications to delete/uninstall them, tap [Internal shared storage]u[FREE UP SPACE]. ・ Tap [Internal shared storage]u[Files], or tap [USB drive]/[SD card] to display the data list. You can check the saved data or copy/move/delete/share the data (P.207). ・ To release the recognition of USB storage/microSD card, tap of "USB drive"/"SD card". To recognize again, tap [USB drive]/[SD card]u[MOUNT].
Device admin apps*2 SIM card lock*2*3 Osaifu-Keitai lock (UIM card)*2 Encryption & Encrypt credentials*2 device Storage type Trusted credentials User credentials Set whether to enable device administrator application. P.48 P.149 The internal storage is encrypted by default. Show type of credential storage*4. Display trusted CA credentials. Manage the user credentials saved in the terminal. Install from Install certificates.
of "Screen lock" as required. ■ To turn off the screen lock Make pattern Set whether to show pattern when the Home screen, [apps 1 From visible* entering pattern. folder]u[Settings]u[Lock screen & Automatically Set the time from when the screen security]u[Screen lock]uEnter the lock turns off to when the screen set unlock pattern/PIN/password automatically locks. u[None]u[YES, REMOVE].
Setting up fingerprint authentication The terminal has a fingerprint sensor (P.32) and you can unlock the screen lock with the fingerprint authentication, touching it with the registered finger. Notes on using fingerprint authentication Your terminal recognizes a fingerprint based on its unique characteristics. For this reason, some users may not be able to use fingerprint authentication if their fingerprints are not sufficiently unique.
Registering your fingerprint 1 From the Home screen, [apps folder]u[Settings]u[Lock screen & security]u[Fingerprint Manager]. ・ 2 If you have already registered fingerprint, the entry screen for unlocking the screen lock appears. Enter the unlocking method to display the fingerprint setting screen. [NEXT]. After this step, follow the onscreen instructions. When the registration is complete, the screen indicating addition of the fingerprint appears.
Setting the lock screen Make settings for the lock screen and Ambient display. While Ambient display is ON, you can display an image in sleep mode or check date & time or notifications. 1 From the Home screen, [apps folder]u[Settings]u[Lock screen & security]u[Lock screen preferences]. Ambient display (Always-on display) When to show Ambient display New notifications Set a timing for activating Ambient display. Set whether to activate Ambient display when you have notifications in sleep mode.
Keep notifications Set whether to keep the notification content displayed on the lock screen when you have any notifications. *1 Appeared when "Screen lock" (P.191) is set to "Pattern"/"PIN"/"Password". *2 Displayed items vary depending on the settings of "Screen lock". Location 1 2 3 From the Home screen, [apps folder]u[Settings]u[Lock screen & security]u[Location]. of "Use location". Read the attention on location information and tap [AGREE].
Member/profile settings docomo service initial settings Switch USB debugging Open source licenses Check or change your membership information/profile information used for docomo services. P.44 Make the settings for using the dedicated terminal at a docomo Shop etc. View open source licenses. ❖Information ・ You can disable applications displayed in docomo service/cloud. Disabled applications may not be displayed in the list of docomo service/cloud.
2 [REMOVE ACCOUNT]u[REMOVE ACCOUNT]. ❖Information You cannot remove the docomo account. ・ Setting auto-sync of accounts The information of online service can be synchronized with the terminal automatically. You can display and edit information on the terminal or a PC. ・ Setting Auto-sync data, communication occurs to synchronize and a packet communication charge may be applied. 1 From the Home screen, [apps folder]u[Settings]u[Accounts]. 2 / of "Automatically sync data"u[OK].
Accessibility 1 From the Home screen, [apps folder]u[Settings]u[Accessibility]. Volume key shortcut Osusume hint Text-to-speech output Font size Display size Set whether to enable activation of accessibility function using the volume key shortcut, or set shortcut services to be activated. Set whether to use Osusume hint service. ・ Use setting is required in advance (P.196). P.200 Set font size. Enlarge/reduce of the size of the icon etc. displayed in the screen.
Setting Text-to-speech output 1 From the Home screen, [apps folder]u[Settings]u[Accessibility] u[Text-to-speech output]. Preferred engine Language Speech rate Pitch PLAY RESET Select and set the engine for Text-tospeech output. Set language for Text-to-speech output. Set speed at reading out text. Set the pitch of voice to read out text. Playback reading sample. Reset setting of "Speech rate" and "Pitch" to the default. Digital Wellbeing Check your usage habit of the terminal.
Google Check, change, or delete information or settings related to your Google account and the services. 1 From the Home screen, [apps folder]u[Settings]u[Google]. 2 Set each item. ❖Information ・ To search by voice using a Bluetooth device, in Step of 2, tap [Search, Assistant & Voice]u[Voice]u "Bluetooth audio recording". System 1 From the Home screen, [apps folder]u[Settings]u[System].
*1 Appeared when [Advanced] is tapped. *2 The display may differ depending on usage condition. About phone 1 From the Home screen, [apps folder]u[Settings]u[System]u [About phone]. Register a name of the terminal. Phone number Your own phone number is displayed. Emergency information Register your blood type or the other information that can be useful for initial response in emergency or the contacts for emergency. Legal information Check third party's licenses or Google terms of use, etc.
Languages & input 1 From the Home screen, [apps folder]u[Settings]u[System]u [Languages & input]. Languages On-screen Gboard keyboard Google voice typing Moji-Henshu Manage keyboards Physical keyboard Show onscreen keyboard Keyboard shortcuts helper Spell checker* Autofill service* Personal dictionary* P.203 P.63 Pointer speed* Text-to-speech output* Set speed of the pointer when using a mouse (commercially available) etc. P.200 * Appeared when [Advanced] is tapped.
Gestures 1 From the Home screen, [apps folder]u[Settings]u[System]u [Gestures]. Side sense One-handed mode Smart backlight control P.186 P.70 Set the screen not to turn off when you hold the terminal in your hand but touch operation is not performed. ・ The screen may turn off if the terminal remains at rest for a while even when you set Smart backlight control to On and hold the terminal in your hand. Swipe up on Set to activate Task manager (P.69) by Home screen swiping (flicking) up.
Resetting the terminal Resetting the terminal deletes all data and accounts, and resets the terminal back to the initial (default) state. ・ The downloaded applications and data in the internal storage (music, images, etc.) are included to the data to be deleted. ・ Make sure to back up the important data you have on the terminal before resetting. ・ Reset the terminal while charging the battery, or when the battery is sufficiently charged. ・ Initial settings (P.44).
Add user Add users from lock screen Select this to add users. You need to configure initial settings for each added user. Follow the onscreen instructions. ・ When a registered user uses the terminal, "You (the name set for the user's Google account)" or "You (new user)" is displayed. Set whether to add a guest or user from the Quick settings panel (P.68) on the lock screen when the unlocking method of the screen lock is "Pattern"/ "PIN"/"Password". * The display may differ depending on usage condition.
File management Storage structure Phone (Internal shared storage) Folders in the internal storage (/storage/ emulated/0) by default are as follows. ・ Displayed folders may differ depending on the terminal operations. Alarms Android DCIM Download Movies Music Notifications Pictures Podcasts Ringtones Stores alarm sounds etc. Stores setting data for system or each application, temporary files, etc. Stores still pictures/videos shot by Camera. Stores downloaded data through the web browser.
■ 1 2 3 4 ■ 1 2 3 4 Creating a folder From the Home screen, [apps folder]u[File manager]. Tap the folder as required. u[New folder]. Enter a folder nameu[OK]. ■ 1 2 3 4 Renaming a folder or file From the Home screen, [apps folder]u[File manager]. Tap the folder as required. Touch and hold a folder or file you want to rename. u[Rename]uEnter a nameu [OK]. ■ 1 2 3 4 5 Deleting a folder or file From the Home screen, [apps folder]u[File manager]. Tap the folder as required.
Keep the Bluetooth device approximately 10 m or more away from a wireless LAN device. ・ Within approximately 10 m, turn off either the Bluetooth device or the wireless LAN device. ・ Data communication Bluetooth function Bluetooth function is a technology which enables to connect with Bluetooth device such as PC, handsfree headset wirelessly. ・ The terminal does not connect wirelessly with all types of Bluetooth devices. ・ Supported Bluetooth profiles (P.
・ Make sure that the Bluetooth function and Bluetooth detection function of the target device are on in advance. 1 From the Home screen, [apps folder]u[Settings]u[Device connection]u[Pair new device]. ・ Detected Bluetooth device names are displayed in "Available devices". 2 Tap a name of Bluetooth device for pairing. 3 Confirm the Bluetooth pairing code (pass code) on the confirmation screenu[PAIR]. ・ ■ Paired Bluetooth device names are displayed in "Currently connected".
Sending/Receiving data via Bluetooth function Turn on Bluetooth function in advance, then pair with a target Bluetooth device. NFC communication You can send/receive data to/from a device with NFC such as a mobile phone. Sending data via Bluetooth function 1 [Bluetooth] from the sharing menu of each application. 2 Tap the other Bluetooth device. Receiving data 1 Send data from the other Bluetooth device. ・ 2 appears on the status bar. Drag the status bar downwards u[Incoming file]u[ACCEPT].
The terminal does not communicate with all NFC devices. ・ For notes when holding over the other device (P.148). ・ Turning on NFC function 1 From the Home screen, [apps folder]u[Settings]u[Device connection]u[Connection preferences]. 2 Tap of "NFC/Osaifu-Keitai". NFC function is turned on. When NFC is turned on, all of Osaifu-Keitai compatible services and Android Beam are available. ・ Tap [Android Beam]u / to switch ON/OFF of Android Beam.
Receiving data 1 Perform data sending operation on a sender's terminal. 2 Place marks face to face with the terminal for sending. ・ When the data is received, the application which corresponds to the data activates. When data such as still image or video, or music is received, may appear on the status bar. Drag the status bar downwardsuTap [Beam complete] to launch the application associated with the received data. Follow the onscreen instructions.
External device connection 1 When a screen for installing driver software appears, wait for a while until the installation is complete. ・ When the confirmation screen of installing software appears on the terminal, tap [SKIP] or [CANCEL]. ・ Connecting to PC Connect to a PC to exchange data between the internal storage or the microSD card and a PC. ❖Information Appeared screen may vary depending on the operating system (OS) of a PC. ・ You may not be able to operate copyrighted data of images, music, etc.
Removing USB cable A to C safely ・ 2 Do not remove the USB cable A to C during while transferring data. Data may be damaged. 1 Insert the Type-C plug of the 3.5mm Earphone jack conversion/ TV Antenna cable SO01 into the USB Type-C jack of the terminal. Confirm that it is not transferring data, remove the USB cable A to C from the terminal and a PC. Connecting earphones or headphones To output audio sound from commercially available headphones or earphones, connect them to the supplied 3.
International roaming Overview of International roaming (WORLD WING) With the international roaming (WORLD WING), you can use the terminal without changing phone number or mail address in the service area of the overseas network operator affiliated with DOCOMO. You do not need to change the settings of call and SMS. For details of International Roaming Service (WORLD WING), refer to NTT DOCOMO website. https://www.nttdocomo.co.
Before using overseas Advance preparation Network service settings Before leaving Japan To use the terminal overseas, check the following in Japan. ■ Subscription ・ ■ Charging ・ ■ Check if you subscribe WORLD WING. For details, contact "General Inquiries" on the last page. For charging, refer to NTT DOCOMO website. Usage charge Overseas usage charges (call and packet communication) differ from those in Japan. For details, refer to NTT DOCOMO website.
After arriving overseas When you arrive overseas and turn on the terminal, the terminal connects an available network automatically. Connectivity When "Automatically select network" (P.218) is set to ON, the most suitable network will be selected automatically. Setting network By default, the terminal automatically searches available network and connect to it. To switch network manually, set as follows.
Setting the preferred network type 1 From the Home screen, [apps folder]u[Settings]u[Network & internet]. 2 [Mobile network]u[Advanced]u [Preferred network type]. 3 Tap any one of [4G (preferred)/3G/ GSM]/[4G/3G]/[3G (preferred)/ GSM]/[GSM only]. ・ Select "4G (preferred)/3G/GSM" to switch available network type automatically. Using VoLTE during international roaming Set to enable VoLTE when VoLTE is available during international roaming.
Making/Receiving a call in the country you stay When you arrive overseas and turn on the terminal, an available network is automatically set. ・ Check that the battery and signal levels are high enough. ・ Depending on the network operator, even if the Caller ID notification is active, the caller ID may not be notified or appear properly. In this case, calls cannot be made from the call log. u If the area code (city code) begins with "0", omit "0".
2 3 4 Enter the area code (city code) and other party's phone number. . ・ When the International dial assist screen is displayed, tap [CALL]. When the call is finished, . Making a call within the country you stay You can make a call by entering the phone number of the other party's land-line phone or mobile phone in the same way you do in Japan. 1 2 3 4 Making a call to WORLD WING user overseas From the Home screen, Enter a phone number.
Making a call from the other party ■ To have the other party make a call from a land-line phone or mobile phone in Japan to the terminal in the country you stay, the other party only needs to dial the phone number as in Japan.
Setting International dialing assist 1 2 From the Home screen, u . [Settings]u[Calls]u[Roaming settings]. 3 [International dial assist]. Auto Add international prefix or country conversion code automatically. Country code Select a country code used for auto conversion. International Select an international prefix used for prefix auto conversion. Setting Network service (overseas) Set network service such as voice mail from overseas. ・ You need to set "Remote operation settings" (P.
After returning to Japan After returning to Japan, restore to the settings which are made before you traveled. ■ When using packet communication overseas Turn off "Data roaming" (P.218). ■ If you cannot connect to DOCOMO network automatically after returning to Japan Set "Preferred network type" (P.219) to "4G (preferred)/3G/GSM". ・ Turn on "Automatically select network" (P.218).
Appendix Troubleshooting Troubleshooting When you have a vague idea of malfunctioning, you can perform diagnosis by yourself. For details, refer to NTT DOCOMO website. ・ Check if the software update is necessary for the terminal. If necessary, perform the software update (P.234). ・ When checking the following items not to improve the state, contact the phone number given in "Repairs (Inquiries/Request)" on the last page of this manual (in Japanese only) or DOCOMO-specified repair office.
■ Charging Phenomenon Cause and handling Cannot charge ・ Check if the adapter's power (The notification plug is correctly inserted to a LED does not power outlet or accessory turn on, or the socket. ・ Check if the adapter and the icon does not indicate charging terminal are set correctly. → P.41 ・ When using an AC adapter status) (optional), check if the Type-C plug of the AC adapter is connected to the terminal correctly. → P.41 ・ When using the USB cable A to C 02 (optional), check if a PC is turned on.
■ Terminal operation Phenomenon Cause and handling ・ While calling, depending on the Become hot while operating/ radio wave condition or call charging duration time, the terminal may become hot around the earpiece/speaker. This condition is not abnormal. ・ While operating or charging, or if you use applications, record videos, etc. for a long time while charging the battery, the terminal, internal battery or adapter may become hot. It is not a problem for operation. You can continue to use the terminal.
Phenomenon Cause and handling Operations are ・ Check if the power is turned off. not possible → P.43 when tapping or ・ Check if you activate the screen pressing keys lock. → P.191 The screen reacts ・ When large amount of data is slowly when you saved in the terminal or tap or press the transferring large-size data keys between the terminal and microSD card, the reactions on the screen may be delayed.
Phenomenon Applications cannot be operated properly (applications cannot be activated, or errors occur frequently) ■ Cause and handling Are there any applications being disabled? Enable disabled applications, then retry. → P.181 ・ Are the permissions for the application granted? → P.57, P.180 ・ Phone call Phenomenon Cannot make a call even if you tap The ringtone does not sound ・ Cause and handling Check if you activate Airplane mode. → P.176 Is "Ring and notification volume" set to the minimum? → P.
■ Display Phenomenon The display is dim ・ ・ ・ ・ ・ ■ Cause and handling Check if "Sleep" is set in short time period. → P.184 Check if the brightness of screen is changed. → P.186 When "Adaptive brightness" is ON, screen brightness is changed according to the ambient brightness. → P.184 Check if you cover the Proximity/ Light sensor with a sticker etc. → P.32 When the temperature of the terminal becomes high while using, the display may become darker. It is not abnormal.
■ International roaming Phenomenon Cause and handling Cannot use the ・ Do you subscribe to WORLD terminal overseas WING? (when is Check if you subscribe to WORLD WING. displayed) Cannot use the ・ Check if you are out of the terminal overseas international roaming service (when is area or in an area with poor displayed) signal strength. Check if the service area and network operator are available or not, refer to NTT DOCOMO website. ・ Change the network settings or overseas network operator settings.
■ Bluetooth function Phenomenon Cause and handling ・ Allow Bluetooth device The terminal cannot be (commercially available) to be connected to a detectable and then make Bluetooth pairing with the device on the device/A terminal. If you want to cancel a Bluetooth device paired device and then make the cannot be found pair setting again, cancel the pair by search settings on both the terminal and the Bluetooth device (commercially available). → P.
■ Map/GPS Phenomenon Cannot set AUTO-GPS service information Cause and handling ・ Check if the battery level is low and AUTO-GPS function stops. If AUTO-GPS stops due to "Lowpower operation settings", AUTO-GPS service information cannot be set. In this case, set "Low-power operation settings" to "Not suspend" or charge the battery. →P.39 , P.196 ・ Check if "AUTO-GPS operation settings" is marked. → P.
Error messages SIM card is PUKlocked PIN lock disable code is locked. Storage space running out Memory full Cause and handling Enter your PUK (PIN Unlock Key) (P.48) correctly. PIN Unlock Key is locked. Please contact a docomo Shop. Available memory of the internal storage is getting low If you continue to use the terminal, some functions or applications may not work. Uninstall (P.180) unnecessary applications. There is no memory space in the internal storage or microSD card. Delete unnecessary data (P.
・ Security patch update Apply the security patch (software that manages the vulnerability) so that you can use the terminal safer. For detail of the updates which provided to the terminal and the period, refer to NTT DOCOMO website. Terms of use When using packet communication via Xi/ FOMA, set the access point for Mobile network to sp モード (sp-mode) or mopera. ・ For using packet communication via Xi/ FOMA, communication charge is not applied for downloading.
Updating the software Starting the update To start updating, perform the either operation in the following. ・ From the update notification From the status bar of the terminal, tap the notification of "Software update notified" or "Software update available" and then start updating. ・ From the screen which appears on a regular basis When updating the terminal is available, a confirmation screen indicating "Perform Now" and "Later" may appear in full screen.
2 3 Restart. As soon as update preparation is completed, the terminal restarts automatically. ・ The confirmation screen appears just before the restart. To stop restarting, tap Cancel during a given period of time. ・ Notification of update completion. When the update is complete, "Software update completed" appears on the status bar of the terminal. ・ For Android OS version upgrade, an introduction of the latest functions appears after "Software update completed" is selected.
・ Stay in a place with good radio wave condition when downloading the update file. The update may be canceled if the radio wave condition is not good enough. Connecting to a PC to update Install a software for "Software update" beforehand. For methods of software installation, refer to the following website. https://www.sonymobile.co.jp/support/ (in Japanese only) Warranty and After Sales Services Warranty The terminal comes with a year's warranty starting from the date of purchase. ・ 3.
b Even if the warranty period has not expired, a fee will be charged for repair under the following circumstances. 1. The malfunction or damage is due to modification (including alteration of software) of the product. 2. The malfunction or damage is due to damage of the terminal body, display, external connection jack, etc. caused by being dropped or subjected to an external pressure, or the malfunction or damage is due to breakdown or deformation of the internal circuit board of the terminal. 3.
After Sales Services If you have problems with the terminal Before asking repair, see "Troubleshooting" (P.225) in this manual to check the problem. If the problem still persists, contact "Repairs (Inquiries/Request)" on the last page (in Japanese only). If repair is required resultingly Bring the terminal to the DOCOMO-specified repair office. However, it must be taken during business hours of the repair office. Note that repair may take some days depending on the problem.
● After the repair, Wi-Fi MAC address or Bluetooth address may be changed regardless of the repaired parts. ● Take care not to let an object that is easily affected by magnetism, such as a cash card near the terminal because the card may become unavailable. ● The terminal is waterproof. However, if inside of the terminal gets wet or moist, turn the power off and then bring the terminal to a DOCOMO-specified repair office as soon as possible.
Sharing screens with the operator (for inquiries on phone) 1 Call あんしん遠隔サポートセンター (Anshin Enkaku Support center). From DOCOMO mobile phones (No prefix) 15710 (toll free) From land-line phones 0120-783-360 Business hours: 9:00 a.m. to 8:00 p.m., open all year round ・ To make a call to the Anshin Enkaku Support center from the terminal, from the Home screen, [apps folder]u[ 遠隔 サポート (Enkaku support)]u[ 電話で問 い合わせる (Call for inquiries)]u . 2 From the Home screen, [apps folder]u[ 遠隔サポート (Enkaku support)].
Main specification Changes may occur because of software update, etc. For the latest information, refer to NTT DOCOMO website. ■ Charging time Wireless LAN Standards The terminal SO-41A Height : Approx. 158mm, Width : Approx. 68mm, Thickness : Approx. 8.2 mm (Thickest part : Approx. 9.1mm) Weight Approx. 164g Display Size Approx. 6.
Camera Image pickup device Type Camera ① : Back-side illumination CMOS Camera ② : Back-side illumination CMOS Camera ③ : Back-side illumination CMOS Front camera : Back-side illumination CMOS Size Camera ① : 1/3.4 inches Camera ② : 1/2.6 inches Camera ③ : 1/3.4 inches Front camera : 1/4.0 inches Effective pixels Camera ① : Approx. 12.2 million pixels Camera ② : Approx. 12.2 million pixels Camera ③ : Approx. 12.2 million pixels Front camera : approx. 8 million pixels Recording pixels Camera ① : Approx.
*3 Continuous stand-by time is the estimated average operation time when the terminal is in stationary state with normal radio signal reception. Continuous stand-by time varies greatly according to the terminal settings, usage environment, use frequency of calling/mail/camera, etc. *4 When the use frequency of each function is high, actual usage time may be less than half. *5 Continuous call time varies greatly according to the terminal settings, usage environment, use frequency of calling/mail/camera, etc.
■ Display language Malaysian/Bosanski jezik/Catalan language/ Czech/Danish/German/Estonian/English/ Spanish/Filipino/French/Croatian/ Indonesian/Icelandic/Italian/Latvian/ Lithuanian/Hungarian/Dutch/Norwegian (language for books)/Polish/Portuguese/ Romanian/Albanian/Slovakian/Slovenian/ Serbian/Finnish/Swedish/Vietnamese/ Turkish/Greek/Bulgarian/Kazakh language/ Macedonian language/Russian/Ukrainian language/Hebrew/Arabic/Persian (Dari language)/Marathi/Hindi/Bengali/Tamil/ Telugu/Kannada/Malayalam/Thai/Ko
End User Licence Agreement Software delivered with this device and its media is owned by Sony Mobile Communications Inc., and/or its affiliated companies and its suppliers and licensors. Sony Mobile grants you a non-exclusive limited license to use the Software solely in conjunction with the Device on which it is installed or delivered. Ownership of the Software is not sold, transferred or otherwise conveyed.
Export Controls and Regulations This product and its accessories may be covered and controlled by Japans export control regulations ("Foreign Exchange and Foreign Trade Law" and related laws and regulations) And, they are also under coverage of Export Administration Regulations of the U.S. When exporting and reexporting this product and its accessories, take necessary procedures on your responsibility and expense.
Trademarks The company names and product names appearing in this manual are trademarks or registered trademarks of their respective holders.
"Google" and "Google" logo, "Android", "Google Play" and "Google Play" logo, "Gmail" and "Gmail" logo, "Google Maps" and "Google Maps" logo, "Google Calendar" and "Google Calendar" logo, "YouTube" and "YouTube" logo, "Google Docs" and "Google Docs" logo, "Google Chrome" and "Google Chrome" logo, " Google Lens" and "Google Lens" logo are trademarks or registered trademarks of Google, LLC. ・ Disney DX appli that Walt Disney Company (Japan) Ltd.
Other product and company names mentioned herein may be the trademarks of their respective owners. In context, TM and ® mark are omitted. ・ Any rights not expressly granted herein are reserved. All other trademarks are property of their respective owners. ・ SIM unlock This terminal supports SIM unlock. If you release SIM lock, you can use SIM by a carrier other than NTT DOCOMO. ・ Available services and functions may be limited. DOCOMO is not liable to any failures or malfunctions.
Index A About phone ・・・・・・・・・・・・・・・・・・・・・・・・ 202 Access point Initializing ・・・・・・・・・・・・・・・・・・・・・・・・・ 172 Setting・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 171 Accessibility ・・・・・・・・・・・・・・・・・・・・・・・・・ 199 Accounts ・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 197 Add account ・・・・・・・・・・・・・・・・・・・・・・・・・ 197 Adjusting sound volume ・・・・・・・・・・・・・・・ 188 Airplane mode ・・・・・・・・・・・・・・・・・・・・・・・ 176 Alarm ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 163 Alarm ringtone ・・・・・・・・・・・・・・・・・・・・・・・ 189 Alarm volume ・・・・・・・・・・・・・・・・・・・・・・・・ 188 Album ・・・・・・・・・・・・・・・・・・・・・
Audio output ・・・・・・・・・・・・・・・・・・・・・・ 101 Calling screen ・・・・・・・・・・・・・・・・・・・・・・ 100 Declining a call ・・・・・・・・・・・・・・・・・・・・・・ 99 Ending ・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 101 Hold call ・・・・・・・・・・・・・・・・・・・・・・・・・・ 101 Incoming screen ・・・・・・・・・・・・・・・・・・・・・ 98 Making a call ・・・・・・・・・・・・・・・・・・・・・・・・ 95 Mute ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 101 Receiving ・・・・・・・・・・・・・・・・・・・・・・・・・・ 98 Speaker ・・・・・・・・・・・・・・・・・・・・・・・・・・・ 101 Call Blocking ・・・・・・・・・・・・・・・・・・・・・・・・・ 106 Call forwarding service ・・・・・・・・・・・・・・・・・ 105 Call history ・
Device connection ・・・・・・・・・・・・・・・・・・・・ 178 Digital Wellbeing ・・・・・・・・・・・・・・・・・・・・・ 200 Disaster kit ・・・・・・・・・・・・・・・・・・・・・・・・・・・ 89 Disney DX ・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 92 Display・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 184 dmarket・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 145 dmenu ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 145 docomo Data Copy・・・・・・・・・・・・・・・・・・・・ 164 docomo mail ・・・・・・・・・・・・・・・・・・・・・・・・・ 115 docomo nano UIM card ・・・・・・・・・・・・・・・・・ 34 Precautions ・・・・・・・・・・・・・・・・・・・・・・・・・ 21 docomo service/cloud ・・・・・・・・・・・・・・・・・ 196 dphoto
Adding (docomo LIVE UX) ・・・・・・・・・・・・・ Backup ・・・・・・・・・・・・・・・・・・・・・・・・・・・・ Deleting (docomo LIVE UX) ・・・・・・・・・・・・ docomo LIVE UX ・・・・・・・・・・・・・・・・・・・・・ Folder (docomo LIVE UX) ・・・・・・・・・・・・・・ Folder (Xperia Home) ・・・・・・・・・・・・・・・・・ Kisekae ・・・・・・・・・・・・・・・・・・・・・・・・・・・・ Restore ・・・・・・・・・・・・・・・・・・・・・・・・・・・・ Settings (docomo LIVE UX) ・・・・・・・・・・・・ Simple Home ・・・・・・・・・・・・・・・・・・・・・・・ Wallpaper (docomo LIVE UX) ・・・・・・・・・・・ Wallpaper (Simple Home) ・・・・・・・・・・・・・ Wallpaper (Xperia Home) ・・・・・・・・・・・・・・ Widget (docomo LIVE
N Network service ・・・・・・・・・・・・・・・・・・・・・・ 105 Network & internet ・・・・・・・・・・・・・・・・・・・・ 167 News ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 90 NFC ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 211 One-touch function ・・・・・・・・・・・・・・・・・ 212 Osaifu-Keitai lock (UIM card) ・・・・・・・・・・ 149 Notification icon ・・・・・・・・・・・・・・・・・・・・・・・ 65 Notification LED ・・・・・・・・・・・・・・・・・・・・・・・ 64 Notification panel ・・・・・・・・・・・・・・・・・・・・・・ 66 Notification sound ・・・・・・・・・・・・・・・・・・・・ 189 Notification volume ・・・・・・・・・・・・・・・・・・・ 188 Nuisance call blocking service ・・
S Schedule Creating ・・・・・・・・・・・・・・・・・・・・・・・・・・ 162 Display ・・・・・・・・・・・・・・・・・・・・・・・・・・・ 161 Screen lock ・・・・・・・・・・・・・・・・・・・・・・・・・・ 192 Canceling ・・・・・・・・・・・・・・・・・・・・・・・・・・ 44 Setting・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 191 Searching ・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 71 Security code Network security code ・・・・・・・・・・・・・・・・ 47 PIN code ・・・・・・・・・・・・・・・・・・・・・・・・・・・ 47 PIN Unlock Key (PUK code) ・・・・・・・・・・・・ 48 Setting menu ・・・・・・・・・・・・・・・・・・・・・・・・ 167 Shooting still pictures ・・・・・・・・・・・・・・・・・ 131 Shooting videos ・・・・・・・・・・・・・・
TV antenna cable ・・・・・・・・・・・・・・・・・・・ TV link ・・・・・・・・・・・・・・・・・・・・・・・・・・・・ Viewing reservation ・・・・・・・・・・・・・・・・・ Watching TV ・・・・・・・・・・・・・・・・・・・・・・・ 152 154 157 152 U WORLD CALL ・・・・・・・・・・・・・・・・・・・・・・・・・ 97 World clock ・・・・・・・・・・・・・・・・・・・・・・・・・・ 163 WORLD WING ・・・・・・・・・・・・・・・・・・・・・・・・ 216 X USB connection ・・・・・・・・・・・・・・・・・・・・・・ 214 USB Storage ・・・・・・・・・・・・・・・・・・・・・・・・・ 189 Xperia Assist ・・・・・・・・・・・・・・・・・・・・・・・・・ 198 Xperia guide ・・・・・・・・・・・・・・・・・・・・・・・・・・ 94 Xperia Lounge Japan ・・・・・・・・・・・・・・・・・・・ 94
Check usage charge, usage status, subscription information, or make various application online The terminal: d メニュー (dmenu) u [My docomo(お客様サポート)(My docomo (Customer support))] PC: My docomo (https://www.nttdocomo.co.jp/mydocomo/ ) (in Japanese only) * There are cases where the site may not be available due to system maintenance, etc. * To use "My docomo", "Network security code" and "ID/password of d ACCOUNT" are required. Don't forget your mobile phone ...
General Inquiries 0120-005-250 (toll free) Repairs (Inquiries/Request) ■From DOCOMO mobile phones (In Japanese only) (No prefix) 113 (toll free) *Service available in: English, Portuguese, Chinese, Spanish. *Unavailable from part of IP phones. (Business hours: 9:00 a.m. to 8:00 p.m.) *Unavailable from land-line phones, etc.