INSTRUCTION MANUAL
Introduction ● "Instruction Manual" (PDF file) Operations and settings of each function are explained. It can be downloaded from NTT DOCOMO website. Thank you for your purchase of "xx-xxx". For proper use of the xx-xxx, read this manual carefully before and while you use the xx-xxx. ❖Note ･ About manuals ● " クイックスタートガイド (Quick Start Guide)" (Supplied accessories) Part names and functions are explained. Important information for xx-xxx is posted in the following website.
❖Information ･ ･ ･ ･ ･ ･ ･ ･ ･ Please note that "xx-xxx" is called as "the terminal" in this manual. In this manual, the description is written based on the default state. In this manual, the easier procedure is described for the functions and settings which have multiple operating procedures. The terminal may have a software update of the operating system (OS) for the purpose of quality improvement or addition of functions. In that case, operation procedure may change.
Contents ■ Supplied accessories. . . . . . . . . . . . . . . . . 1 Precautions . . . . . . . . . . . . . . . . . . 4 About using the terminal....................................................4 Recommended features......................................................7 Safety Precautions (Always follow these directions).....................................................................................8 Handling precautions.........................................................
Apps . . . . . . . . . . . . . . . . . . . . . . 145 Data communication. . . . . . . .201 d メニュー (dmenu)............................................................ 145 dmarket.................................................................................... 145 Play Store................................................................................. 146 Osaifu-Keitai........................................................................... 147 Music...................................................
Precautions About using the terminal ･ The terminal supports 5G*, LTE, W-CDMA, GSM/GPRS and wireless LAN systems. * 5G will be available through a software update. Because the terminal uses radio frequencies, it is not available inside a tunnel, underground, building or other locations where radio waves do not reach, in a place with weak radio waves, or out of 5G service area or LTE service area.
The terminal automatically performs communication for synchronizing data, checking the latest software version, and maintaining a connection with the server, and for other purposes. If you transmit a large amount of data, such as when downloading applications or watching video, a packet communication charge becomes high. Subscription to Packet Pack/packet flat-rate service is highly recommended.
The screen may become partially dark or the colors may be changed if you set the display brightness to brighter than necessary or use the terminal extremely for a long time. Also, unevenness of colors or brightness, or changes of colors may be found depending on direction you are looking. That is because of the structure of organic EL display, not a malfunction. ･ DOCOMO is not liable to any failures or malfunctions for commercially available optional equipment.
Recommended features Cinematography Pro (Cinema Pro) "Cinema Pro" feature, supervised by Sony professional camera team, is specialized for shooting videos. You can enjoy the operational feeling like shooting with a professional cinema camera, and the image creation. Ordinary scenes can be recorded to videos with cinematic impression. → P.
Safety Precautions (Always follow these directions) For safe and proper use of the terminal, please read the "Safety Precautions" prior to use. ■ ALWAYS observe the safety precautions since they intend to prevent personal injury or property damage. ■ The following symbols indicate the different levels of injury or damage that may result if the guidelines are not observed and the terminal is used improperly.
1. Handling the terminal, adapter, and docomo nano UIM card (common) Don’t DANGER Don’t Don’t Don’t Do not use, store or leave the equipment in locations subject to high temperature or accumulation of heat (e.g. by the fire, near a heater, under a kotatsu or bedding, in direct sunlight, in a car in the hot sun). Doing so may cause fire, burns, injury, electric shock, etc.
No disassembly No liquids No liquids Do Do not disassemble or modify the equipment. Doing so may cause fire, burns, injury, electric shock, etc. Do not let the equipment get wet with liquids such as water (drinking water, sweat, seawater, urine of pet animals, etc.). Doing so may cause fire, burns, injury, electric shock, etc. For waterproofness, see the following. ⇒ P.26 "Waterproofness/Dustproofness" Do not allow liquids such as water (drinking water, sweat, seawater, urine of pet animals, etc.
CAUTION Don’t Don’t Don’t Don’t Don’t Do not use damaged equipment. Doing so may cause fire, burns, injury, etc. Do Do not place on an unstable or inclined platform. Be careful especially when vibrator is set. Doing so may cause the device to fall etc. and cause injury. Do not use or keep in a place that is very humid, dusty, or subject to high temperature. Doing so may cause fire, burns, electric shock, etc. For waterproofness/dustproofness, see the following. ⇒ P.
WARNING Don’t Do not turn on or flash the flash/photo light with the luminous part close to the other people's eyes. Keep enough distance away especially from babies and infants. Doing so may cause blurred vision etc. Or it may dazzle his/her eyes or scare him/her causing an accident such as injury. Don’t Do not turn on or flash the flash/photo light toward a driver of a car etc. Doing so may disturb driving and cause an accident etc. Don’t Do not watch a repeatedly-blinking screen for a long time.
Do Do Do Do If you have a weak heart, set the vibrator or ringtone volume carefully. Sudden vibration or ringtone sounding when for incoming call astonishes you and it may affect your heart. If you wear any electronic medical equipment, check with the relevant medical electronic equipment manufacturer or vendor whether the operation may be affected by radio waves. The radio wave from the terminal may affect the electronic medical equipment.
Don’t If the substance leaks out from the internal battery, do not make it contact with your skin of face or hands, clothes, etc. Doing so may cause injury etc. on your eyes or skin. If the internal substance gets into your eyes, mouth, etc. or contacts skin or clothes, immediately rinse the contacted area with clean water. If the substance gets into your eyes, mouth, etc. immediately see a doctor after rinsing.
Don’t Don’t Don’t Don’t Don’t Don’t No wet hands Do not touch the adapter if you hear thunder. Doing so may cause electric shock etc. Do Do not short-circuit the charging jack while it is connected to a power outlet or accessory socket. Do not touch the charging jack with your hands, fingers, or any part of your body. Doing so may cause fire, burns, electric shock, etc. Do not place heavy objects on the adapter cord, or do not apply unnecessary force such as pulling etc.
Do Do Unplug Unplug When plugging/unplugging an adapter into/from the terminal, plug/unplug the adapter straight toward the jack without applying excessive force such as pulling the cord etc. Incorrect plugging/unplugging may cause fire, burns, injury, electric shock, etc. If the charging terminal is deformed such as being bent etc., stop using immediately. Do not use it with the deformation restored. Doing so may cause fire, burns, injury, etc. due to short-circuit of charging terminal.
Do Do When you get close to other people within 15 cm just like not having enough space to turn around, set the radio wave of the terminal to OFF beforehand (Airplane mode, to Power off, etc.). A person in close proximity may put on implanted a medical electrical equipment such as pacemakers and ICDs. The radio waves from the terminal may affect the performance of electronic medical equipment. Follow the instructions of each medical facility for the use of the terminal on their premises.
Part Material Surface treatment Tray of docomo nano Polyacetal resin ― UIM card/tray of microSD card Handling precautions ■ Common precautions ･ xx-xxx is waterproof/dustproof; however, do not allow liquids such as water (drinking water, sweat, seawater, urine of pet animals, etc.) or foreign objects such as dust to enter inside of the terminal or adhere to optional devices. The adapter and the docomo nano UIM are not waterproof/dustproof.
･ Clean the terminal with a dry soft cloth (such as used for cleaning eyeglasses). ･ - Rubbing roughly may scratch the display. - Drops of water or dirt left on the display may cause stains. - Do not use alcohol, thinner, benzine, cleaning detergent, etc. to clean the terminal. These chemicals may erase the printing on the terminal or cause discoloration. ･ Clean the jacks or the fingerprint sensor occasionally and use the terminal in a clean state. If the jack etc.
･ Do not insert the plug of external device to the external connection jack at a slant when connecting. Or, do not pull the plug when they are connected. ･ The data in cash cards, credit cards, etc. may be erased. Also, strong magnetic objects may cause a malfunction of the terminal. Doing so may cause a malfunction or damage. It is not abnormal if the terminal becomes warm while in use or charging. You can continue using the terminal. ･ Do not expose the camera lens under direct sunlight.
･ To store the terminal, avoid the following conditions so as not to degrade the performance or the battery life of the internal battery. - The battery is fully charged (immediately after the charging is complete) - The battery has run out (the terminal cannot power on) An appropriate battery level for storing is about 40%. ･ Type of internal battery for the terminal is as follows.
Take an expended docomo nano UIM card to a sales outlet such as docomo Shop for proper disposal in order to protect the environment. ･ Do not carelessly damage, contact, or short-circuit an IC. ･ ･ Frequency band The frequency band used by the terminal's Bluetooth/wireless LAN function is written as follows: Doing so may cause data loss or malfunction. ･ Do not drop a docomo nano UIM card or subject it to impact. Doing so may cause malfunction.
･ Bluetooth cautions The operating frequency band of the terminal is used by industrial, scientific, consumer and medical equipment including microwave ovens, premises radio stations for identifying mobile units used in the manufacturing lines of plants (radio stations requiring a license), specified low power radio stations (radio stations requiring no license) and amateur radio stations (hereinafter referred to as "another station").
･ 2.4GHz device cautions The operating frequency band of the WLAN device is used by industrial, scientific, consumer and medical equipment including home electric appliances such as microwave ovens, premises radio stations for identifying mobile units used in the manufacturing lines of plants (radio stations requiring a license), specified low power radio stations (radio stations requiring no license) and amateur radio stations (radio stations requiring a license).
■ Note ･ Do not use a remodeled terminal. Using a remodeled terminal violates the Radio Law/Telecommunications Business Act. The terminal is compliant with rules on the technical standard conformance of specified wireless equipment based on the Radio Law/ Telecommunications Business Act, and as a proof of it, the "Technical Compliance Mark " is depicted on the electronic nameplate of the terminal. To check the electronic name plate, from the Home screen, u[Settings]u[About phone]u[Certificates].
Waterproofness/ Dustproofness xx-xxx provides waterproofness property of IPX5*1, IPX8*2, and dustproofness property of IP6X*3 with the cover of docomo nano UIM card/microSD card slot firmly attached. *1 IPX5 means that a communication device keeps functioning after applying a jet flow of 12.5 L/min. from every direction from a distance of approximately 3 m for at least 3 minutes using water nozzle in 6.3 mm inner diameter.
･ You can use the terminal in a bathroom. - Do not immerse the terminal into a bathtub. Also, do not use the terminal in hot water. Doing so may cause malfunction. If you should fall the terminal into the bathtub, immediately pick it up to drain water in specified procedure (P.30). - Never put the terminal in hot spring water or water containing soap, detergent or bath powder. In case the terminal gets wet with water other than tap water, wash it in the procedure above.
■ Opening the cover of docomo nano UIM card/microSD card slot Put your tip of finger (fingernail) into the groove and draw the cover out in the arrow direction. ■ Closing the cover of docomo nano UIM card/microSD card slot Push the tray all the way in the arrow direction and firmly press parts and make sure that there are no gaps between the terminal and the cover.
Do not perform actions shown in the illustrations below. Using Soap/Detergent/ Washing with brush/sponge Bath powder Soaking in ocean water Machinewashing Using in hot spring Do not move the terminal in the water or slam the terminal against the surface of water. ･ If you put the terminal in tap water, be sure to have it within 30 minutes. ･ When you use the terminal in swimming pool, obey rules of the facility. ･ The terminal does not float on water. ･ Do not leave water on the terminal.
c DOCOMO does not guarantee actual operations under all states. Malfunctions deemed to be caused by inappropriate operation by the customer are not covered by the warranty. Draining water from the terminal When the terminal is wet, water may flow out after wiping it off; drain the water in the following steps. a Hold the terminal firmly and wipe off moisture on the terminal surface and back side with dry, clean cloth etc.
d Wipe off water drained from the terminal with dry, clean cloth etc., and dry naturally. ･ Wipe off water drained from the terminal with dry, clean cloth etc., and dry naturally. ･ Do not wipe off water remaining in gaps directly with a cotton swab etc. ･ Dry the terminal naturally for about 3 hours at room temperature. ･ Never connect a Type-C plug if the terminal is wet.
Before using the terminal Part names and functions c b Top d e fg a l h m n c Second microphone : Used for reducing noise when calling. d Front camera lens → P.127 e Earpiece/speaker f Proximity/light sensor*1 : Detects a face approach during a call to prevent misoperation, or used for automatic control of the screen brightness. g Notification LED → P.64 h Display (Touch screen) → P.50 i Speaker j Mouthpiece/microphone k USB Type-C jack*2 : Used for charging etc. It supports USB Power Delivery.
pq r s t v w u x *2 Display the screens of the terminal on a TV or other monitor via a DisplayPort compatible USB Type-C cable (commercially available). Or, use USB-LAN adapter (commercially available) to access Internet via LAN cable (Ethernet). That may not work properly depending on your USB Type-C cable, USB-LAN adapter, or device which you want to connect to. * 3 It is built into the terminal. Covering with your hand may affect the quality of communications.
docomo nano UIM card The docomo nano UIM card is an IC card which information such as your phone number is recorded. ･ You can use the terminal with a docomo nano UIM card. If you have a docomo mini UIM card, UIM, or FOMA card, bring it to a docomo Shop to replace it with a docomo nano UIM card. ･ When docomo nano UIM card is not inserted to the terminal, making calls, packet communication, etc. are not available.
3 Set the docomo nano UIM card in the tray with the IC face down. 5 Make sure that the corner cut of the card is oriented properly. ･ Be sure to fit the docomo nano UIM card into the tray so that it does not shift. ･ Push the tray into the end, firmly press each point indicated with , and then make sure that there are no gaps between the terminal and the cover. Corner cut Cover Tray 4 IC side Hold the terminal horizontally, insert the tray with the card into the terminal, and then push it straight.
3 Remove the docomo nano UIM card from the tray. docomo nano UIM card Tray 4 Hold the terminal horizontally, insert the tray into the terminal, and then push it straight. ･ Check the orientation of the terminal and the tray. Tray 5 Firmly push the tray into the end and make sure that there are no gaps between the terminal and the cover (P.35). microSD card You can save the data in the terminal to a microSD card or import data from the microSD card to the terminal.
The terminal supports microSD cards of up to Class 10 and UHS speed class 1. Note that the speed class indicates performance of microSD cards and all the functions may not be performed at the speed class rate. ･ Although a microSD card can be used on other compatible device, data which is transferred from the other device may not be viewed/played on the terminal. Also, data saved to the microSD card from the terminal may not be viewed/played on another devices.
4 Hold the terminal horizontally, insert the tray with the card into the terminal, and then push it straight. ･ 5 Check the orientation of the terminal and the tray. Push the tray into the end, firmly press each point indicated with , and then make sure that there are no gaps between the terminal and the cover. ･ When the terminal is turned on, appears on the status bar. Tray Cover Removing microSD card 1 2 Draw the cover of docomo nano UIM card/microSD card slot (P.28).
3 Remove the microSD card from the tray. microSD card FCC ID To view the regulatory compliance mark. 1 Tray 4 Find and tap [Settings]u[About phone]u[Certificates]. Regulatory compliance mark such as FCC ID is displayed on the screen. Hold the terminal horizontally, insert the tray into the terminal, and then push it straight. ･ Check the orientation of the terminal and the tray. Tray 5 Firmly push the tray into the end and make sure that there are no gaps between the terminal and the cover (P.38).
Charging The internal battery is not fully charged at the time of purchase. ･ Estimated charging time (P.232) Available time on full charge (estimate) The available time differs depending on operating environment or the internal battery condition. ･ Estimated available time (P.231) Life of the internal battery The internal battery is a consumable part. Each time the internal battery is recharged, the battery usage time per one charge gradually decreases.
･ You can check the latest charging equipment compatible with the terminal in the DOCOMO online shop. https://onlineshop.smt.docomo.ne.jp/ options/search.html (in Japanese only) Saving battery life (Battery Care) Battery Care is a function that learns your charging habit (time zone for connecting to charging equipment long) to adjust charging speed and keep battery performance better so as to extend battery life. 1 From the Home screen, u[Settings]u[Battery]u [Battery Care].
Charging with AC adapter 3 When using AC Adapter 07 (optional) for charging, do the following procedures. 1 Insert the Type-C plug of the AC adapter horizontally into the USB Type-C jack of the terminal. 2 Unfold the power plug of the AC adapter and insert it into a power outlet. ･ When charging is started with the power on, the charging start sound is heard and the notification LED of the terminal turns on (P.64).
If the installation screen for the terminal's driver software appears on your PC, please wait a moment for the installation to complete. ･ When the confirmation screen of installing software appears on the terminal, tap [SKIP] or [CANCEL]. ･ Charging with a PC To charge the terminal by connecting to a PC, USB cable A to C 02 (optional) is required. 1 Insert a Type-C plug of the USB cable A to C horizontally into the USB Type-C jack of the terminal.
Turning power off Turning power on/off Turning power on 1 Press and hold the power key for at least 3 second. The terminal vibrates and the lock screen appears after a while. ･ When you first turn on the power and " ようこそ (Welcome)" is displayed, follow the onscreen instructions to make the initial settings (P.45). 1 Press and hold the power key for at least 1 second. 2 [Power off].
Unlocking the screen lock The lock screen appears when you turn on the power or press the power key to exit from sleep mode. ･ When Ambient display (P.178) is activated, double-tap the screen or press the power key to display the lock screen. 1 On the lock screen, swipe (flick) the screen. ❖Information On the lock screen, swipe (flick) or to use Google Assistant or the camera. ･ You can change the screen lock unlocking method (P.185).
2 When the docomo initial setting screen appears, confirm the contentu[Next]. Follow the onscreen instructions to make the following confirmations and settings. - d ACCOUNT settings - Setting functions and services in one operation - Setting docomo cloud - Review additional apps ･ If the confirmation screen for use of functions appears, follow the onscreen instructions. ･ 3 When the setup completion screen appears, [FINISH]. ❖Information ･ ･ ･ ･ ･ The displayed setting etc.
Setting up d ACCOUNT d ACCOUNT is an ID/password that is necessary to use the services available with d Account or d points on a smartphone, tablet, or PC. When you do not set up d ACCOUNT in the initial settings, you can set as follows. 1 From the Home screen, tap u[Settings]u[docomo service/ cloud]u[d ACCOUNT setting]. ･ 2 If the d ACCOUNT confirmation screen etc. appears, follow the onscreen instructions. [Set your d ACCOUNT]/[Create new d ACCOUNT].
･ ■ The PIN Unlocking Key is written on the subscription form (copy for customer) handed at the subscription in the docomo Shop. If you subscribed other than docomo Shop, you must bring your official identification (such as driver's license), the docomo nano UIM card with you to the nearest docomo Shop or contact the "General Inquiries" on the last page. PIN/Password for screen lock It is a security code for using the screen lock function of the terminal (P.185).
■ PIN Unlock Key (PUK code) The PUK code is an 8-digit number for canceling the locked PIN code. The PUK code cannot be changed by yourself. ･ If you failed to enter PUK code 10 times consecutively, the docomo nano UIM card is locked. Please contact a docomo Shop. Unlocking PIN lock 1 2 3 By entering PIN code when powered on, you can protect from improper use. 1 2 From the Home screen, u[Settings]u[Security]u[SIM card lock]u[Lock SIM card]. Enter PIN codeu[OK].
Basic operations Operations on the display (touch screen) ■ Basic operations Using the display (touch screen) Precautions on using the display (touch screen) The display (touch screen) is designed for being touched lightly with fingers. Do not push the touch screen hard with a finger or press sharp-pointed objects (nail, ballpoint pen, pin, etc.) against the screen. ･ Touching the display (touch screen) may not work in the following cases. Note that it may cause a malfunction.
■ Scroll When whole content cannot be displayed, flick up/down/left/right displayed content to scroll (move) the display position. ■ Using Side sense Side sense is a function that allows you to operate the terminal with one hand and you can use it by operating the side sense bar displayed on the screen. ･ You can operate the side sense function on every screen which the side sense bar is displayed.
Double-tap the side sense bar to open the side sense menu from which you can activate applications or turn on/off functions. Slide the side sense bar up to display the multiwindow menu from which you can activate the Multi-window (split screen). Also, slide the side sense bar down to undo the operation (returning to the previous screen). Double-tap ❖Information You can change the operation range, sensitivity of the side sense bar, etc. in "Side sense" (P.179). Set as your preference.
Using the Side sense menu 1 Double-tap the side sens bar. ･ ･ The Side sense menu appears. If the explanation appears, tap [START]. a e b c f d g g Advanced ･ Open the "Side sense" in Settings menu (P.179). ❖Information You can move the menu position up/down by dragging the screen while the Side sense menu is displayed. ･ To end the Side sense menu, perform any of the following operations. - Tap or - Tap outside of the Side sense menu - Double-tap the side sens bar.
Using the Multi-window menu You can activate Multi-window (split screen) using Side sense. ･ Operations in the split screen (P.70). 1 Slide the side sense bar up ･ ･ The Multi-window menu appears. If the explanation appears, tap [START]. a e b c f d g b Pairs of applications (Combination) ･ Pairs of applications which are predicted by your usage condition are displayed. ･ You can also set to display your desired pairs (P.179). c Exit Multi-window ･ Exit Multi-window (split screen).
Basic key icon operation The following operations can be performed by tapping the key icon shown in the bottom of the screen. Switching portrait or landscape view automatically You can set the screen orientation to switch between landscape and portrait view automatically according to the terminal orientation. 1 Back Home History Go back to the previous screen. Or close the menu, the Notification panel, etc. Go to the Home screen. Touch and hold the icon to open the Google Assistant.
If the sound volume is adjusted in "Ring and notification volume" (P.181) in silent mode, the silent mode setting is canceled. ･ You can adjust media sound by dragging up/ down the slider on the volume control bar which appears when the volume key is pressed. Tap to display the sound volume screen and you can change the volume of call sound, ringtone and notification sound, and alarm sound. ･ Capturing the displayed screen You can capture the currently displayed screen as a still image (Take screenshot).
Selecting an application to use When you have some options of applications for certain operations such as sending an email or displaying an image, an application selection screen appears. To select a mail application from "docomo phonebook" application 1 From the Home screen, u[docomo phonebook]uSelect a contact. 2 Select the email address. 3 Select the applicationu[JUST ONCE]/[ALWAYS]. ･ The application selection screen appears.
3 [ALLOW]/[DENY] ･ When the other confirmation screen appears, confirm the content and then repeat the operation. ❖Information If permission is not granted, some applications/ functions may not work, or use of the functions may be limited. ･ To change setting of permissions, from the Home screen, tap u[Settings]u[Apps & notifications]u [SEE ALL XX APPS]uTap any application you want to change the settingu[Permissions]uTap the permission to changeu[Allow]/[Deny].
❖Information When the input method you want to use is not listed in the selection screen, tap of the input method you want to use in "Manage keyboards" (P.194). ･ Software keyboard The default software keyboard is a Japanese keyboard and its layout is "12 keys" when the language is set to Japanese. You can add the following layouts to the Japanese keyboard. ･ Character input method (P.60) 12 keys QWERTY Handwriting GODAN Keyboard with the same key arrangement as a mobile phone.
c Character input method When you tap a key on the software keyboard, candidates list for the entered characters appears. Tap a word to enter from the candidate list, text can be input one after another. Japanese keyboard in 12 keys and QWERTY layouts is explained in this section. a b h c i d j e k f g l Keypad a b h m d e n j i d Moves the cursor to the left. Or changes range of character conversion when it is not yet decided.
j Moves the cursor to the right. Or changes range of character conversion when it is not yet decided. Swipe (Flick) up/down to move the cursor to the other entry field (the operation may not be available depending on condition). k / Enters a space. Before confirming conversion when entering characters in Kana mode, the display changes to " 変換 (Convert)". Tap it to display/switch the conversion candidates. l Enters a line feed. Tap it to decide characters before conversion is decided.
Flick input Multi-tap input Touch a key of 12 keys to display a character, number, or symbol that are assigned to the key. Flick to the direction of a target character etc. to enter the character. ･ On the QWERTY keyboard, flick each key up or down to enter number or symbol. On the 12 keys keyboard, tap the same key consecutively to enter a character, number, or symbol that are assigned to the key. To enter characters etc.
Editing text You can cut or copy text in character entry screen or web page and then past it to the other application etc. 1 Touch and hold text. The text is selected and the edit menu appears nearby. ･ Alternatively, double-tap text. ❖Information To paste a copied or cut character string, touch and hold a position to insertuTap [Paste]. When text is already entered, tap a position to insertu uTap [Paste].
Setting character entry Set character entry per input method such as Gboard. 1 2 From the Home screen, u[Settings]u[System]u [Languages & input]. [On-screen keyboard]uSelect the input method. ･ Tap an item displayed on the screen to set. ❖Information The items vary depending on the input method. For Gboard, alternatively, tap in the character entry screen to display the Settings screen.
Screen display and the icons You can check notifications from applications, the terminal status, etc. with the icons on the status bar. Display the Notification panel to check detail information such as notifications appeared in the status bar. Also, you can open the Quick settings panel and set ON/OFF of the functions. Status bar In the status bar at the top of screen, the notification icons of new mail, running operation, etc. and the status icons of the signal status, battery level, etc. appear.
*1 appears on the right of the icon during communication. *2 is always displayed when the terminal is connected with LTE. *3 The number appeared at the left of the icon varies by the wireless LAN (Wi-Fi) standard that is currently connected. Notification icon The main notification icons displayed on the status bar are as follows. New Gmail message New +Message message New Area Mail Screenshot image is saved Receiving/downloading data Sending/uploading data Notification of data reception etc.
c Notification panel When the notification icons appear on the status bar, you can open the Notification panel to check the notifications, activate corresponding application, etc. 1 Drag the status bar down. a b e f c d a g Quick setting tools ･ A part of the quick setting tools (P.68) are displayed. ･ Tap it to turn on/off each function. ･ Touch and hold it to display the setting screen, etc. depending on function. b Open the Quick settings panel ･ Drag down to open the Quick settings panel (P.
g CLEAR ALL ･ It appears when there are any notifications that can be cleared to clear all notifications. However, some notifications may not be cleared. ❖Information Quick settings panel Set ON/OFF etc. of each function. 1 To close the Notification panel, tap or drag the Notification panel up. ･ Even when the notification icon is not displayed on the status bar, the notification etc. indicating the terminal status may be displayed.
Airplane mode Silent mode (XXXX)* Location Flashlight STAMINA mode Hotspot Dolby Atmos Enable/disable Airplane mode. Set silent mode. Enable/disable location information. Set ON/OFF of the flash/photo light. Enable/disable STAMINA mode. Set ON/OFF of portable hotspot function. Set ON/OFF of Dolby Atmos®. * In "XXXX", the silent mode type appears. c EDIT ･ Display the edit screen to add, delete or rearrange the quick setting tools. ･ In the edit screen, u[Reset] to restore to the default.
･ Split screen Split the screen to display and operate two applications at the same time. ･ Activate the applications to display beforehand. ･ Split screen may not be available depending on application. 1 2 . ･ Tap an icon appeared in the top of a thumbnailu[Split screen]. ･ 3 Applications are displayed as thumbnails. For applications which are not available for the split screen, "Split screen" does not appear. Tap the application thumbnail to display from the lower part of the screen.
2 3 . ･ The application thumbnails are displayed in the upper - lower panes (left - right panes in the landscape view) Display the application thumbnail or the name you want to switch to. Swipe (flick) the thumbnail left/right (up/down in the landscape view) to display the thumbnail or name of the application you want to switch to. ･ Alternatively, tap [All apps] displayed in the left/right end (upper/lower end in the landscape view) of the thumbnail lineuTap the application to display it. ･ 4 [Done].
･ ･ ･ ･ ･ - When you perform vigorous exercise such as running, going up and down stairs, etc. By default, "d 払い (d payment)" app is set to "App 1". SuguApp function is not available when the screen is OFF, while the lock screen is displayed, or during a call. If you put the terminal into a bag or pocket when the screen is ON, an application may activate in rare cases because that is recognized as a motion performance. When SuguApp function is available, the notification icon is displayed.
Mute, Reject Mute the incoming ringtone or reject a call by placing the terminal horizontally with the screen faced down while a call is incoming, or shaking the terminal twice. You can select from "Mute", "Reject", or "Reject and send SMS". Disable Turn off Suguden function Suguden automatically overseas. during roaming Notes on using Suguden ･ In the following case, Suguden does not work properly.
Functions of Suguden ● Disconnect (Motion) ･ When the motion is performed, a call will be disconnected even in the following cases. - When the other party puts the call on hold - When the Answering Machine is running (playing the answering message/recording a message) ･ When disconnecting a call with Suguden motion, it may not react (disconnect) if the speed of motion for placing the terminal facing down is fast. In that case, try the motion slowly to react (disconnect).
● Mute, Reject When "Mute, Reject" is set to ON, the function set in "Mute, Reject" may be performed when you shake the terminal strongly even just once while a call is incoming because the action is recognized as motion performance. ● Disable Suguden during roaming Suguden is disabled automatically overseas by default setting. To use Suguden overseas, turn off "Disable Suguden during roaming" in Suguden setting. One-handed mode Reduce the screen so that you can easily operate the terminal with one-hand.
Searching information in the terminal and websites Enter a word in the search box to search the information in the terminal or on the Internet. 1 From the Home screen, tap the Google search widget. 2 Enter a keyword to search. 3 Tap the search suggestion or the software keyboard. ･ ･ Character entry (P.58) The search candidate list appears. of ❖Information Alternatively, from the Home screen, tap [Google]u [Google] to open the "Google" application.
Home screen Switching the home app You can switch the home app for the terminal to "docomo LIVE UX", "Xperia Home" or "Simple Home". ･ "docomo LIVE UX" (P.77) ･ "Xperia Home" (P.84) ･ "Simple Home" (P.87) 1 2 3 docomo LIVE UX It is a home app that DOCOMO offers you. You can customize the home screen intuitively. For details on docomo LIVE UX, from the Home screen, tap u u[Help] to see Help, or refer to the following website. https://www.nttdocomo.co.jp/service/ live_ux/index.
c Home screen layout You can activate applications or use widgets in the Home screen. All of applications are stored in the Application screen and the application icon shortcuts are located in the Home screen. ･ Swipe (flick) the Home screen left or right to switch the pages. ･ When the application has a notification, a dot or number may appear on the upper right of the icon or folder. a b g c d e f a h i Widget ･ Activate the widget (Google Search).
Managing the Home screen Moving application icon shortcut etc. 1 2 In the Home screen, touch and hold an application icon shortcut or widget you want to move. Drag it to a desired position. ･ To move it to the next page, drag it to the end of the Home screen. Removing an application icon shortcut from the Home screen 1 ･ 2 From the Home screen, . Touch and hold an application icon you want to add to the Home screen.
Uninstalling an application Renaming folder Before uninstalling, back up all of the related contents which you want to save including the data saved in the application. ･ Some applications cannot be uninstalled. 1 2 3 ･ 1 In the Home screen, touch and hold an application icon shortcut you want to uninstall. ･ ･ 2 ･ When entry is finished, tap software keyboard. 1 Touch and hold an area of the Home screen where no icons etc. are displayedu[Home settings].
Osusume Apps settings Display my daiz NOW My Magazine Get started Help Set the display of "Osusume Apps" contents in the Application screen. Set the display of my daiz NOW which is located in the leftmost page of the Home screen. Turn ON/OFF of flick-up activation of My Magazine. Check the tutorial of the Home screen. Check how to use the Home screen in detail. Application screen It is appeared when is tapped in the Home screen.
e Pull-down menu ･ You can sort all the applications in the Application screen by "Recent", "Name" or "Installed". Using Osusume Apps Applications or services are recommended according to your usage condition. 1 2 3 From the Home screen, [Osusume Apps]. ･ . When using it for the first time, the confirmation screen for use appears. Tap [ENABLE] to display the explanation screen.
Setting the display category 1 2 From the Home screen, Displaying my daiz NOW . 1 u[ 表示ジャンル設定 (Display category setting)]. In the leftmost page of the Home screen, swipe (flick) right. Swipe (flick) up or down to switch cards to be displayed. ･ Swipe (flick) left to return to the Home screen. ･ If the confirmation screen for use appears, tap [my daiz を使ってみる (I'll try "my daiz")] and follow the onscreen instructions. ･ Marked categories will be displayed on My Magazine.
Setting the display Xperia Home screen Set to show/hide my daiz NOW. 1 2 Touch and hold an area of the Home screen where no icons etc. are displayedu[Home settings]. Tap of "Display my daiz NOW". ･ ･ This section describes the Home screen displayed when the home app is set to "Xperia Home". my daiz NOW disappears. To display it again, tap of "Display my daiz NOW". a b g Home app information You can check the version information etc. of docomo LIVE UX. 1 2 From the Home screen, [About].
e Dock ･ Locate application icon shortcuts or folders. They are always displayed even if the page of the Home screen is switched. f Widget : Google Search g Wallpaper h Widget : Multi-window switch ･ Tap to use the Multi-window switch (P.70). ❖Information ･ ･ ･ ･ ･ ･ ･ Swipe (flick) the Home screen up to open the Application screen. In the Home screen, swipe (flick) the part above the dock left or right to switch the pages and the indicator of the current location appears above the dock.
Adding a widget to the Home screen Widget is an application which can be added to the Home screen to use. Use a widget to start an application easily. 1 2 Touch and hold an area of the Home screen where no icons, etc. are displayed. [Widgets]uTouch and hold a widget to add. When the Home screen appears, drag it to anywhere. ･ If the settings screen etc. appears, follow the onscreen instructions. Changing wallpaper You can change the wallpaper of the Home screen and the lock screen.
Setting Home screen 1 Touch and hold an area of the Home screen where no icons, etc. are displayed. 2 [Home settings]. Show Google™ Set whether to display the App "Google" app screen in the Home screen. Swipe (flick) the first page right to display it. Notification dots P.174 Add icon to Set whether to add an application Home screen icon shortcut in the Home screen when the application is installed. Allow Home Set whether to allow the Home screen rotation screen or the Application screen to rotate.
a Select a contact to save. Machi-chara ･ Tap to ask something you want to know through dialog. b Application icon ･ Tap to activate an application. c Google Search d Apps ･ Applications that are not displayed in the Simple Home screen are displayed in a list. e Speed dial ･ Use the speed dial (P.88). 2 ❖Information Making a call To change to the standard Home screen, from the Simple Home screen, tap [Settings]u[Exit Simple Home]u[OK]u[docomo LIVE UX]/[Xperia Home].
Sound Using Settings 1 On the Simple Home screen, [Settings]. Phone number Display Brightness Adaptive brightness Auto-rotate screen Font size Sleep Screen lock Your own phone number is displayed. Adjust the screen brightness. Adjust the screen brightness automatically according to the ambient brightness, etc. with reference to the brightness set in "Brightness". Set whether to switch portrait/landscape view automatically according to the terminal orientation. Set font size.
Changing applications on the Simple Home screen 1 2 3 On the Simple Home screen, [Settings]u[Customize Home]. [Change apps]/[Reorder apps]. Select the applicationuSelect the application to newly display/select the location to move to. ･ 4 Application screen When the home app is set to "Xperia Home", all applications are displayed in the Application screen. ･ Switching Home app (P.77) 1 Swipe (flick) the Home screen up. a c When "Change apps" is selected, "Settings" and "Apps" cannot be changed.
d Machi-chara ･ Tap to ask something you want to know through dialog. ❖Information A dot or number may appear on the application icon or folder when there is a notification from the application. ･ Adding an application to the Home screen Add shortcuts of application to the Home screen. 1 In the Application screen, touch and hold an application icon. ･ ･ 2 The shortcut menu appears. To add applications from a folder, tap the folder and then touch and hold an application icon.
3 [UNINSTALL]. 4 [OK]. ･ For applications that cannot be uninstalled, "UNINSTALL" is not shown. When "DISABLE" is displayed, you can disable the application (P.173). Editing the Application screen ❖Information To close the rearrange screen, u[Exit], or tap . To take out an application icon from a folder, tap the folderuTouch and hold the application iconuDrag it to a place you want to locate. ･ To rename a folder, tap a folderuTap the folder name, or tap [Unnamed Folder].
Application list Preinstalled applications are as follows. The descriptions when the home app is set to "docomo LIVE UX" are explained here. ･ For usage of some applications, separate subscription (Charged) is required. ･ For some applications, you can check functions or operation steps from the help. ･ Design of application icon may vary depending on the home app or usage condition. ･ Preinstalled applications or layout of applications may differ depending on the initial setting condition etc.
Settings Configure settings for the terminal. → P.159 地図アプリ (Map application) An application which supports your outings totally according to multiple means of transportation as a car, walk, train. To use a part of features such as navigation, subscription to the charged service is separately required. Data Copy An application that allows you to transfer data when changing model, back up to/restore from a microSD card. → P.157 データ保管 BOX (Data Storage BOX) An application for using Data Storage BOX.
Jspeak An application for translating spoken words into the listener's native language. Use Face-to face translation/Phone translation/Image translation/Common phrase to enjoy communication with the other party who speaks different language. Files You can search data such as still images, videos, music, or downloaded files. → P.199 Photos You can playback photos or videos. You can back them up to your Google account. → P.
d 払い (d payment) An application for use "d 払い (d payment)", the payment service provided by DOCOMO. You can do your shopping simply, convenient and with good bargain just by showing a barcode displayed on the application in the target stores. dphoto A service for backing up photos or videos up to 5GB to cloud free of charge, then accessing the backup data from smartphones, tablets or PCs.
Gmail You can use the email services provided by Google and major Internet service providers. → P.120 Google Search information in the terminal and websites by keywords. → P.76 Google One An application to use Google One services such as managing storage plan, auto backup of data, using various offers. Google Pay An application for managing electronic money or point cards collectively. iD アプリ (iD application) An application for using "iD", electronic money offered by DOCOMO.
Reader by Sony An application that allows you to read e-books purchased in Sony's eBooks store "Reader Store". Video & TV SideView Play videos. In addition, view the TV program guide or use your terminal as a remote for Sony televisions or other devices. Xperia ガイド (Xperia guide) Display Xperia 使いこなしガイド (Xperia use guide) to read explanation of the functions or check how to use them.
❖Information When there is a notification which indicates update of application or pause of setup is displayed in the Notification panel, or there is any application icon which is shown in gray, downloading of the application is not complete. You can download in the following procedures. - Connect Wi-Fi (downloading starts automatically) - Drag the status bar downuOpen a notification which indicates update of application (P.67)u Follow the onscreen instructions to configure Wi-Fi, etc.
Phone/Phonebook ･ Making/Receiving a call With VoLTE (HD+), you can make voice calls with sound that is much higher quality than with VoLTE. To use VoLTE (HD+), the usage requirements of VoLTE must be met, and both you and the other party must have models which support VoLTE (HD+). Emergency call Making a call Emergency call 1 2 From the Home screen, u Enter a phone numberu . 3 When the call is finished, ･ Tap . to delete the number. .
Note that the areas/time for which the "Emergency call location information" is ready to be used vary depending on the preparatory state of each Emergency call acceptance organization. ･ When calling 110, 119 or 118 from the terminal, tell that you are calling from a mobile phone, and give your phone number and your current location precisely for checking callback from the Emergency call acceptance organization such as police.
Making an international call (WORLD CALL) WORLD CALL is a service for making international calls, which is available from DOCOMO's mobile phones in Japan. For details on WORLD CALL, refer to NTT DOCOMO website. 1 2 3 From the Home screen, u . Dial + (touch and hold [0])uEnter Country code, Area code (City code), recipient number in the orderu . When the call is finished, . Receiving a call When a phone comes in, the incoming call screen appears.
e Name/phone number of the other party ❖Information When "Answer" of "Suguden setting" (P.72) is ON, you can answer calls just by placing the terminal to your ear. ･ When "Disconnect (Motion/Voice command)" of "Suguden setting" (P.72) is ON, you can disconnect a call by the motion or voice command during a call. ･ Muting the ringtone for an incoming call 1 While receiving a call, press the volume key or the power key.
❖Information ･ To edit a message beforehand, from the Home screen, tap u u[Settings]u[Calls]u[Reject call with message]uSelect a message and edit itu[OK]. Receiving a call when an application is running Operations during a call On the Calling screen, you can set voice output or mute, or enter a phone number to make a call to another party. ■ If the screen is turned on (except on the lock screen) or an application is running when a call comes in, the notification appears in the upper screen.
j Speaker: Set ON/OFF of speakerphone. ･ Other party's voice can be heard from the speaker and handsfree call can be made. ･ When the terminal is connected to Bluetooth device etc., tap it to switch audio output. ❖Note ･ Do not bring the terminal close to your ear with the speakerphone on to avoid from hearing damage. ❖Information To hold/add a call, "Call waiting" subscription is required (P.108). ･ The notification icon appears on the status bar while dialing, incoming, calling or holding.
c An image set to a contact etc. ･ Tap to display the profile screen of the Contacts. d History ･ The call type (outgoing call/incoming call/missed call), number of calls, how long ago, etc. are shown. e Switching tabs ･ You can switch each tab of Top Contacts, Call History, and Contacts. f Menu g Make a voice call ･ Tap to make a voice call to the corresponding phone number in the call log. h Display the dialpad 4 Deleting a call history uTap From the Home screen, "Call History" tab.
Answering Machine When Answering Machine is set, the answering message is played when you cannot answer an incoming call and message from the caller can be recorded even if you are not subscriber of Voice Mail Service. ･ Time and number of items that can be recorded to Answering Machine (P.233) 1 2 From the Home screen, u . [Settings]u[Calls]u[Answering Machine]. Answering Machine Pick up after Use while roaming Greetings Messages Set whether to use Answering Machine. Set a ringing time for answering.
Call settings You can set the network services, set call rejection, or edit Reject call with message. 1 2 From the Home screen, [Settings]u[Calls]. Network Voicemail service service Call forwarding service Call Waiting Caller ID notification Nuisance call blocking service Caller ID display request service Call notification u . Record caller's message when you cannot answer an incoming call. Forward a call when you cannot answer an incoming call.
Contact docomo* Calling accounts Call to General Inquiries etc. of DOCOMO. Set Internet phone (SIP) account. * Not displayed if a docomo nano UIM card is not inserted. Phonebook In the phonebook, you can enter various information for contacts, for example, phone numbers, mail addresses and various service accounts. Displaying phonebook 1 From the Home screen, u[docomo phonebook] ･ The Contacts list screen appears.
■ Contacts screen On the Contacts screen, you can view names of contacts etc. You can set a photo or image to a contact, and display contacts by group. a c d Managing phonebook Adding a new contact 1 From the Home screen, u[docomo phonebook]u ･ b 2 On the profile edit screen, enter necessary information such as name. ･ 3 e . When you have set up Google account etc., select the account to save to. To add items, tap [More fields]. [SAVE].
Making a call from the phonebook 1 From the Home screen, u[docomo phonebook]uSelect a contact. 2 On the profile screen, tap 1 From the Home screen, u[docomo phonebook]uSelect a contact to edit. 2 On the profile screen, 3 4 1 From the Home screen, u[docomo phonebook]uSelect a contact you want to add to Top Contacts. 2 On the profile screen, tap change to . . Editing a contact ･ Adding a contact to Top Contacts . When you join the contacts, select a contact to edit.
■ Contacts screen My info Cloud menu* d ACCOUNT setting International use setting Service quality improvement Accounts Default account for new contacts Contacts to display Sort by Name format Phonetic name Import Export Specified number rejection * Signing in to cloud is required. Display your own profile and you can edit it (P.113). Display cloud menu. P.47 Set whether to use the functions which allow communication such as synchronizing to cloud or setting when docomo phonebook is used overseas.
Checking my profile and editing information 1 2 3 From the Home screen, u[docomo phonebook]u u[Settings]u[My info]. uEnter required items such as name. [SAVE]. ･ If you logged in to the cloud, follow the onscreen instructions. Importing/Exporting/Sharing phonebook entries Phonebook entries can be imported from a microSD card or docomo nano UIM card, or exported to a microSD card. This is useful, for example, when you want to move the contact information to another phone.
Mail/Web browser docomo mail Send/receive mails using DOCOMO mail address (@docomo.ne.jp). Data can be easily transferred when changing models or restored when you have lost the terminal since sent and received mails are saved on the docomo mail server. Also, your d ACCOUNT allows you to use the same email address to send, receive, and view email on several devices, such as tablets and computers. For details of docomo mail, refer to NTT DOCOMO website. https://www.nttdocomo.co.
■ c Contact list screen a b c d e f g ■ Message list screen k h i j l m a Switching tabs ･ Tap to switch between displaying all contacts and only +Message users (contact with icon) to display. b My profile ･ Your own contact is displayed. Tap to display/edit my profile. Official Account ･ Tap to display official accounts. d Favorite contact ･ The contacts set to Favorites are displayed in the upper part of contact list, below "Official Account".
Sending a message 1 From the Home screen, [+Message]. 2 u u[New message]/[New group message]. ･ 3 4 ■ Message screen ab Group message is a function which allows multiple +Message users ( icon displayed in the contact) to exchange messages among them. g Select a recipient. c d To send a recipient who is not registered to Contacts, tap [Enter name and phone number] and input a phone number directly. ･ For group message, select multiple recipients and then tap [OK].
d : Display a sharing menu to send photos, stamps, location information, etc. ･ While the sharing menu is displayed, you can use functions such as sending images or recording voice. e Message entry field ･ You can enter a message. f : Switch to the stamp selection screen g : Send an entered message. h Message delivery status ･ : The recipient has checked the message It is available only when the settings of "Use message read function" of both sender and recipient are ON.
Reading a message Sent/received messages are displayed in thread by recipient/sender. 1 2 From the Home screen, [+Message]. uSelect a message thread. ･ Deleting a message 1 From the Home screen, [+Message]. 2 3 uSelect a thread. Functions used for replying to messages (P.116) 2 3 4 From the Home screen, [+Message]. uSelect a thread. Touch and hold a messageu . Select a recipient and enter a messageu (Send). u Only messages on the terminal can be deleted.
Changing the settings of +Message 1 2 From the Home screen, [+Message]. u[MyPage]u[Settings]. Set for messages, back up/restore, etc. Official Set the notification sound for official Account accounts. Photos and Set for file attachment, etc. such as videos photos or videos when sending/ receiving. Screen display Set the theme color, or background of message screen. Notification Set notifications. Privacy Set a passcode, block list, etc.
Refreshing Gmail Gmail You can use the email services provided by Google or by general providers. ･ Set up your Google account (P.46) or email account by following the onscreen instructions, if you have not already done so. 1 2 From the Home screen, [Google]u [Gmail]. In the Inbox, swipe (flick) the screen down. ･ This refreshes the Inbox. ❖Information For details on Gmail, from the Home screen, tap [Google]u[Gmail]u u[Help & feedback] to see Gmail Help.
Early Warning "Area Mail" Area Mail is a service which allows you to receive earthquake early warning or tsunami warning, emergency warning related to weather etc. delivered by the Meteorological Agency, and disaster/evacuation information delivered by the national government or local governments without being influenced by congestion. ･ Area Mail is a free service for which subscription is not required. ･ Area Mail cannot be received in the following case.
Checking received Area Mail later 1 2 3 From the Home screen, u[Disaster kit]. [Early Warning "Area Mail"]u[Area Mail]. Select an Area Mail from the Area Mail list. Deleting Area Mail 1 2 3 From the Home screen, u[Disaster kit]. [Early Warning "Area Mail"]u[Area Mail]. Mark Area Mail messages you want to deleteu[Delete]u [DELETE]. Setting Early Warning "Area Mail" Set whether to receive Area Mail, or set operations when receiving Area Mail. 1 2 3 From the Home screen, u[Disaster kit].
Set volume of beep sound of incoming Area Mail. ･ When it is set to ON, the terminal emits sound at the maximum volume even in silent mode. ･ When it is set to OFF, the terminal emits sound according to the alarm volume setting. Check screen Check the reception screen and the image and buzzer/ringtone sound for earthquake beep tone early warning, tsunami warning and disaster/evacuation information, emergency warning related to weather etc.
❖Information ･ Changing tabs To copy text in a web page, touch and hold a textu Drag or to select a range of textuTap [Copy]. 1 . ･ Adding a new tab Open multiple tabs and view websites. 1 2 From the Home screen, [New tab]. View website. ･ u u 2 A number in the icon explained in Step 1 varies by the number of tabs that are opened. Closing a tab 1 Opening incognito tab 1 2 u u ❖Information Around address entry field is displayed in gray with incognito tab.
Languages Changing Chrome settings 1 2 From the Home screen, tap u[Settings]. Sign in to Chrome Sync and Google services Search engine Passwords Payment methods Address and more Notifications Homepage Themes Privacy Accessibility Site settings . Sign in to Chrome with your Google account. Make the sync setting or Google services. Lite mode Downloads About Chrome Set the search engine. Set whether to save the passwords entered to websites.
Managing bookmarks and history Checking history 1 You can check history, save bookmarks, etc. Bookmarking a website 1 2 From the Home screen, u Display a website to bookmark. u . Opening a bookmark 1 2 2 From the Home screen, [History]. Tap a history to check. u u ❖Information ･ ･ To delete history, tap of history. To delete all history, [Clear browsing data...]uSelect the period to clear the datauConfirm that "Browsing history" is marked, then tap [Clear data].
Shooting/sending images Please be considerate of the privacy of individuals around you when taking and sending photos using camera-equipped mobile phones. If you cause the public any trouble using the terminal, you may be punished under law or regulations (for example, nuisance prevention ordinance). Camera/Photos Camera All still pictures or videos that you capture on the terminal are stored into the internal storage or a microSD card.
j k Shooting screen a b c d e f g h i j k a l m n o Display area for status icons ･ When the settings such as Smile Shutter (P.134) and Save location (Geo-tagging) are set, the icons are displayed here. Also, when the battery level is low, a red battery icon and the battery level are displayed. b Auto focus frame ･ Appeared when the screen is tapped. ･ When you press the camera key halfway, a square frame appears. ･ When eyes of people are detected, a focus frame of Eye AF appears (P.137).
❖Information ･ ･ ･ ･ ･ ･ The display and operations differ depending on the capturing mode etc. To adjust magnification in detail, do as follows. - Drag the zoom indicator up or down (for portrait view, left or right) - Set "Use Volume key as" (P.136) to "Zoom" and operate with the Volume key - Pinch-in/-out the screen Switch to triple-lens or zoom is not available when shooting with the front camera or depending on the capturing mode.
■ Main capturing mode and Still image size/Video size Capturing Still image size/Video size mode PHOTO Camera : Front camera : 4:3 (12MP) 4:3 (8MP) 16:9 (9MP) 16:9 (6MP) 1:1 (9MP) 1:1 (6MP) Front video camera : VIDEO Video camera : Full HD 4K 1080 × 1080 (1:1) Full HD HD Full HD (60 fps) 1080 × 1080 (1:1) HD Slow HD motion ❖Information For shooting in "Slow motion" mode, sufficient brightness is needed because of its high-shutter speed.
■ Shooting photos ■ 1 2 3 ■ Shooting with the shutter icon From the Home screen, [Camera]. Swipe (flick) the screen to display "PHOTO" mode shooting screen. Tap the shutter icon ( ･ 1 2 Shooting with the camera key From the Home screen, [Camera]. Swipe (flick) the screen to display "PHOTO" mode shooting screen.
■ Shooting with Hand Shutter When shooting with the front camera, turn your palm toward the camera to shoot automatically. You can take picture of yourself without operations such as tapping an icon etc. ･ Hand Shutter is available for shooting with front camera in "PHOTO" mode. It is not available for "Portrait selfie" mode. ･ Setting "Auto capturing" (P.134) to "Hand Shutter" is required. 1 2 3 From the Home screen, [Camera]. Swipe (flick) the screen to display "PHOTO" mode shooting screen.
■ 1 2 3 4 ■ Shooting with the start/stop icon From the Home screen, [Camera]. Swipe (flick) the screen to display the shooting screen in "VIDEO" mode. Tap the start shooting icon ( Tap the stop icon ( ). ･ Tap the pause/start shooting icon ( ) to pause/resume shooting. 1 2 From the Home screen, [Camera]. Swipe (flick) the screen to display the shooting screen in "VIDEO" mode. 3 Tap the shooting screen. 1 2 Tap the shooting screen again to stop shooting.
■ Changing settings when shooting Set still image size. The larger the size of a photo, the larger its file size. Changing from the menu ■ The displayed icons or operations vary by the capturing mode, camera/front camera, or lens type. ･ Some settings cannot be used in combination with one another. ■ 1 2 From the Home screen, [Camera]. uSelect a setting item. 3 Change the setting. For some capturing modes, tap the shooting screen to set.
■ File format (4K) : "VIDEO" mode*1 ■ Select the compression format for shooting videos with 4K from "H.264" or "H.265 (HEVC)". ■ Set whether to tag photos/videos location information (geotag) for the shooting spot. ･ Location information is added when shooting if appeared on the shooting screen. ･ appears while acquiring location information. To pictures shot while acquiring location information, geotags are not added.
■ Use Volume key as Select the function from "Zoom", "Volume", or "Shutter" to assign to the Volume key for shooting. ■ Data storage Set the saving location for shot photos/ videos. ■ Launch with camera key Set the operation for activating the camera by pressing and holding the camera key for at least 1 second. Launch Camera app Only launch the camera. Launch Camera app and capture Launch the camera and shoot a still image. Launch Photography Pro Launch "Photo Pro".
■ HDR : "VIDEO" mode Set whether to shoot photos having natural impression in a state closer to that seen with the eye even when there is contrast in brightness. On Off ･ To play back as a HDR video with the other device etc., a compatible device and service are required. ■ Aspect ratio : "PHOTO", "Portrait selfie" mode Set aspect ratio of photo to shoot. Still image size varies by the setting. 4:3 16:9 1:1 ■ Bokeh : "PHOTO" mode Shoot photos with bokeh effect. uDrag the marker to set.
■ Portrait selfie advanced setting : "Portrait selfie" mode Set Slender face, Bokeh, etc. Mirror Set whether to save mirror image. On Off Touch capture Set whether to use touch capture. On Off Slender face To set profile correction etc., tap the iconu Tap the bar, or drag the marker. Eye enlargement Skin brightness Soft skin Bokeh ■ Switch of effect : "Creative effect" mode Tap to switch a type of effect. You can make various settings according to the type of effect.
c MENU ･ Display the setting menu. Change the image size, switch On/Off of Soft skin effect or On/Off of Face/Eye AF, or set each function etc. The items that can be set vary depending on mode. d DISP ･ Show or hide the data storage, image size, file type/level vial/histogram. e Viewfinder f Lens ･ Switch lens (16 mm/24 mm/70 mm). ･ Tap to adjust the zoom. Or, use the volume key or pinch-out/-in to adjust the zoom. g Thumbnail ･ Shot photo is displayed. ･ Tap to return to the Photo Pro screen.
Shooting with Photo Pro 1 From the Home screen, [Photo Pro]. 2 Select the mode. AUTO P S M MR The terminal determines and automatically sets the suitable value so that you can shoot easily regardless of object or environment. Adjusts the shutter speed and ISO sensitivity automatically to shoot. Adjust the shutter speed manually so that you can shoot changing expression of moving object. ･ ISO is set to "AUTO" if you set S mode. Manually change the shutter speed and ISO to shoot.
f Using Cinema Pro Activating Cinema Pro From the Home screen, [Cinema Pro]. ■ Cinema Pro screen 1 a b c d Clip/still image in project ･ Tap to play a clip/still image shot in the ongoing project. ･ To save a still picture from a clip, while playing the clip, u[Photo Capture]u uTap [Grab] at the timing you want to shoot the still picture. g DISP ･ You can show/hide Frame lines, Metered manual, etc. displayed on the viewfinder. h Grab ･ Shoot a still image before shooting a clip.
Using the menu of Cinema Pro 1 In the Cinema Pro screen, . Create a new project, or display the other projects. Cinema Library Display a list of saved projects. Stabilizer Set whether to use the stabilizer. Metered Set whether to display the exposure manual meter. Frame lines Set whether to display the frame lines as a guide on the 21:9 viewfinder. Grid lines Set whether to display a grid lines as a guide on the 21:9 viewfinder. Level Set whether to display the level. Level Calibrate the level.
Combining clips and creating a film 1 In the Cinema Pro screen, [All files]. ･ 2 3 Clips/still images shot in the ongoing project are displayed. u[Create final film]. Tap the clip in the order of combinationu[CREATE]. Photos View, playback, or manage photos or videos. Displaying photos or videos 1 2 Playing back a created film 1 2 3 In the Cinema Pro screen, . [Cinema Library]u[Final films]. Tap a created film. ❖Information ･ From the Home screen, [Photos]. Tap the image or video.
Deleting files (photo, video) 1 2 3 From the Home screen, [Photos]. Touch and hold a file to delete. ･ You can also select multiple files by touching and holding a file and then tapping the other file successively. u[Move to trash]. Files moved to the trash will be cleared from the Google account and its synced device (the terminal) after a certain period of time.
Apps d メニュー (dmenu) In dmenu, you can easily access sites recommended by DOCOMO or convenient applications. 1 From the Home screen, [d メニュー (dmenu)]. ･ Browser is activated, "d メニュー (dmenu)" appears. dmarket dmarket provides a variety of services, offering digital content, such as music, videos, and books, and giving you access to a shopping site, travel booking site, and other sites. 1 From the Home screen, [dmarket]. ❖Information ･ For details on dmarket, refer to the following website. https://d.
Installing an application Play Store Use Google Play to install useful applications or fun games to the terminal. ･ To use Google Play, you need to set up a Google account (P.46). ･ For details on purchasing applications, returning your purchases, or requesting a refund, see Google Play Help. ･ Once you accept the installation of an application, you will be held responsible for its use. Be careful especially about applications which access many functions or large amount of data.
Osaifu-Keitai This function allows you to use " おサイフケー タイ対応サービス (Osaifu-Keitai compatible service)" by which you can pay money or use as a point card. You can save electronic money, points, etc. to the IC card of the terminal to check the balance or points on the screen. Also, you can prevent from being abused in case of theft or loss by locking Osaifu-Keitai function. For details on Osaifu-Keitai, see NTT DOCOMO website.
Notes on hovering over the device Please note the following when hovering the terminal over an IC card reader or NFC module equipped device. Enabling the NFC/Osaifu-Keitai function 1 2 mark From the Home screen, u [Settings]u[Device connection]u [Connection preferences]. Tap of "NFC/Osaifu-Keitai". ･ The NFC/Osaifu-Keitai function is enabled. When the NFC/Osaifu-Keitai function is enabled, all of the OsaifuKeitai compatible services are available.
Using "Osaifu-Keitai compatible service" To use the Osaifu-Keitai compatible service, set services in the Osaifu-Keitai app. ･ Enable NFC/Osaifu-Keitai function in advance (P.148). 1 From the Home screen, u[Osaifu-Keitai]. ･ If the initial settings are not complete, the initial setting screen appears. Follow the onscreen instructions. 2 3 Select a service. Set the service. 4 Hold mark of the terminal over an IC card reader. ･ Set it from the service application or the website.
2 Tap of "NFC/Osaifu-Keitai lock ON/OFF". NFC NFC is an abbreviation for Near Field Communication and a short range wireless communication method of international standard defined by ISO (International Organization for Standardization). You can use a contactless IC card function, Reader/Writer function and others. ■ iD アプリ (iD application) "iD" refers to electronic money offered by DOCOMO.
When is displayed at the upper right of screen, music can be played with Google Cast devices. Tap and then follow the onscreen instructions to connect. To play music data on a Google Cast device, connect the terminal to the same Wi-Fi network as the one the Google Cast device connected in advance (P.161). ･ Location services Your current location can be positioned using GPS, Wi-Fi, or mobile network. GPS function Sharing music Send music data via Bluetooth or mail attachment.
You cannot use the terminal as a navigation device for an aircraft, vehicle, and person. Note that DOCOMO shall have no liabilities whatsoever even if you suffer damage or loss while performing a navigation using the location information. ･ You cannot use the terminal as a highaccuracy measurement GPS. Note that DOCOMO shall have no liabilities whatsoever even if you suffer damage or loss due to a deviation of the location information. ･ Global Positioning System (GPS) is created and managed by U.S.
Activating GPS/Location services You can position your current location using GPS, Wi-Fi, and information sent from mobile network base stations. 1 From the Home screen, u[Settings]u[Location]. 2 3 of "Use location". Read the notes on location information and tap [AGREE]. ❖Information Finding the current location on the map You can detect your current location using location information service. ･ To detect current location, enable "Use location" (P.153) beforehand.
Creating schedule event Schedule Displaying schedule 1 2 From the Home screen, u[Schedule]. u[Monthly]/[Week]/[Daily]. ･ Swipe (flick) the calendar left or right to display the next or previous month/ week/day. 1 2 3 ･ For setting alarms, tap [Display input option]. [Save]. ❖Information ･ ❖Information To move the cursor to the current date, in Step 2, tap u[Jump to]u[TODAY].
Setting display conditions in Schedule When a search criteria is set, specified data can be displayed. 1 2 3 From the Home screen, u[Schedule]. u[Conditions]. Select the display conditionu[OK] u . ❖Information ･ To search the contents entered in "title", "text" and "Where?", in Step 3, [Free word search]uEnter a search wordu[OK]u[OK]u . Clock Use alarm, world clock, stop watch and timer. Setting an alarm 1 2 From the Home screen, u[Clock]u"Alarm" tab. uSet a timeu[OK].
❖Information When you swipe (flick) it left, the alarm sounds again when the set time has passed (snooze). ･ Alternatively, you can operate by tapping the notification at the top of the screen when the display is on (except on the lock screen). Using Timer ･ Using World clock Display the date and time, time difference from the home city, etc. in cities around the world. 1 2 From the Home screen, u[Clock]u"Clock" tabu . Enter a city nameuSelect a city from the list. ･ To add a city, repeat tapping.
docomo Data Copy docomo Data Copy application allows you to copy the data saved to the terminal to the other terminal or back up/restore the data. Use this application for transferring the data when changing the model or for the regular backup of important data. ･ Data may not be copied, backed up, or restored correctly depending on model, OS or file type. ･ Phonebook entries that can be backed up are the ones registered to the docomo account.
Backup Back up the data such as phonebook entries or media files to a microSD card. 1 From the Home screen, u[Data Copy]u[Backup & Restore]. 2 3 [Backup]. [Start backup]u[BACKUP]. 4 [Back to top]. ･ The selected data can be saved to the microSD card. Restore Copying phonebook entries to docomo account Copy contacts registered to your Google account to the docomo account. 1 From the Home screen, u[Data Copy]u[Backup & Restore].
❖Information Settings Viewing the Settings menu 1 From the Home screen, u[Settings]. Network & internet Device connection Appearance Apps & notifications Battery Display Sound Storage Privacy Location Security docomo service/cloud Accounts Accessibility Digital Wellbeing & parental controls Google System About phone The item indicating the set function may be displayed above the "Network & internet" depending on the condition of usage of the terminal. ･ You can search the setting item etc.
Network & internet 1 From the Home screen, u[Settings]u[Network & internet]. Wi-Fi Mobile network Data Saver Hotspot & tethering Airplane mode VPN* Private DNS* Smart connectivity* P.160 P.163 P.166 P.166 P.168 P.168 Set whether to encrypt communication when the terminal is connected to the compatible DNS server. Also, you can register your private DNS. Set to use the mobile network preferentially when Wi-Fi network connection is unstable. * Appeared when [Advanced] is tapped.
Turning on Wi-Fi 1 2 From the Home screen, u [Settings]u[Network & internet]. of "Wi-Fi". ･ It may take a few seconds to turn on the Wi-Fi. ❖Information Even when Wi-Fi is on, packet communication is available. When a Wi-Fi network is disconnected, the connection is automatically switched to the mobile network. Note that packet communication charge may be applied if the network connection is kept switched. ･ Turn the Wi-Fi function to off when you do not use Wi-Fi to cut battery power consumption.
3 [FORGET]. Adding a Wi-Fi network manually ･ Turn Wi-Fi on beforehand (P.161). 1 2 From the Home screen, u[Settings]u[Network & internet]u[Wi-Fi]. [Add network]. ･ Tap and scan the QR code for Wi-Fi password to connect to the Wi-Fi network. 3 Enter the name (SSID) of Wi-Fi network you want to add. 4 Tap "Security" setting itemuTap a security type of the Wi-Fi network. 5 If required, enter security information for the Wi-Fi network. 6 [SAVE].
❖Information ❖Information To check/delete saved networks or display a QR code of Wi-Fi password, from the Home screen, tap u [Settings]u[Network & internet]u[Wi-Fi]u[Saved networks]. ･ To check your Wi-Fi data usage, from the Home screen, tap u[Settings]u[Network & internet]u [Wi-Fi]u[Wi-Fi data usage]. ･ ･ Using the Wi-Fi Direct function You can connect among the devices compatible with Wi-Fi Direct® via Wi-Fi even without configuring access point. ･ Turn on Wi-Fi and Location beforehand (P.161, P.
Enabling/Disabling mobile data communication 1 2 3 From the Home screen, u[Settings]u[Network & internet]u[Mobile network]. / of "Mobile data". Read the note and tap [OK]. Setting Data warning & limit You can set a usage cycle (measuring period) for mobile data usage, or a warning level or data limit of mobile data usage. 1 2 From the Home screen, u[Settings]u[Network & internet]u[Mobile network]u[App data usage].
Setting an access point An access point for connecting to the Internet (sp-mode) is already registered. You can add or change it if necessary. For details of sp-mode, refer to NTT DOCOMO website. https://www.nttdocomo.co.jp/service/ spmode/ (in Japanese only) ■ 1 Checking the access point in use From the Home screen, u [Settings]u[Network & internet]u [Mobile network]u[Advanced]u [Access Point Names]. 1 2 3 4 6 u[Save]u[OK]. Do not change the MCC/MNC.
Data Saver Restrict the mobile data communication performed by applications in the background to reduce the data usage. 1 2 From the Home screen, u[Settings]u[Network & internet]u[Data Saver]. for "Use Data Saver". ❖Information To set applications whose mobile data communication cannot be restricted by the Data Saver, in Step 2, [Unrestricted data]uTap each of the application you want to set. ･ When Data Saver is ON, tethering function is not available.
❖Information If you operate from [Portable hotspot] in Step 2u [Power save] to enable power saving, the portable hotspot will turn off automatically when the specified time has passed without connecting to wireless LAN devices. ･ To display the QR code for password of Wi-Fi access point, in Step 2, tap [Portable hotspot]u[Share portable hotspot]. ･ Changing the portable hotspot settings 5 ･ 6 2 3 1 4 Connect the terminal to a PC with USB cable A to C 02 (optional) etc. (P.43).
❖Information Airplane mode System requirements (OS) for USB tethering are as follows. - Microsoft Windows 10 - Microsoft Windows 8.1 ･ In USB tethering, you cannot access your terminal's internal storage or microSD card from the PC. In this mode, the functions of using radio wave transmissions such as calling, accessing to the Internet (including sending/receiving mails), etc. are disabled. Enabling Bluetooth tethering 1 ･ Up to 4 Bluetooth devices can be connected to the Internet.
2 3 . Follow the instruction of the network administrator to enter/set required items of VPN settings. 4 [SAVE]. ❖Information To edit VPN, tap of VPN in Step 2uEnter or set each itemu[SAVE]. ･ To delete VPN, tap of VPN in Step 2u[FORGET]. ･ Connecting to a VPN 1 2 3 From the Home screen, u[Settings]u[Network & internet]u[Advanced]u[VPN]. Tap a VPN to connect to. [CONNECT]. Device connection 1 From the Home screen, u[Settings]u[Device connection]. Pair new device Connection preferences P.201 P.
Setting Connection preferences 1 From the Home screen, u[Settings]u[Device connection]u[Connection preferences]. Bluetooth Files received via Bluetooth Chromebook Nearby Share Cast Screen mirroring* NFC/Osaifu-Keitai NFC/Osaifu-Keitai lock ON/OFF Turn On/Off of Bluetooth device, or pair with a Bluetooth device. P.203 Link the terminal with Chromebook. Share a file with nearby compatible device. Display the screens of the terminal on a device that is compatible with Google Cast etc.
Appearance 1 Apps & notifications From the Home screen, u[Settings]u[Appearance]. Wallpaper Ambient display (Always-on display) Clocks P.80, P.86 P.178 Set a clock for the lock screen or Ambient display (P.178). 1 From the Home screen, u[Settings]u[Apps & notifications]. Recently opened apps*1 Display a list of recently activated applications when there is any application which is recently activated. Tap an application to display the app info. SEE ALL XX APPS*1 P.172 Configure notifications P.
Battery* App info Manage and uninstall installed applications. Also, change the settings of notification or permission for each application, or delete the data or cache. Managing applications 1 From the Home screen, u[Settings]u[Apps & notifications]u[SEE ALL XX APPS]. ･ 2 Tap u[Show system] to show all applications. Tap an application. OPEN UNINSTALL/ DISABLE FORCE STOP Notifications Permissions Activate the application. P.173, P.173 P.172 Change notification setting.
Uninstalling applications ･ Before uninstalling application, back up contents you want to save including data saved in the application. 1 2 3 From the Home screen, u[Settings]u[Apps & notifications]u[SEE ALL XX APPS]. Tap the application to uninstall. [UNINSTALL]u[OK]. Disabling application You can disable some applications or services, that cannot be uninstalled. ･ Disabled applications are not displayed on the Home screen, etc. and you cannot execute them, but they are not uninstalled.
2 3 u[Reset app preferences]. Configure notifications Set the notifications of each application or function. Also, you can change the operation of the notification LED or the setting of notifications for the lock screen. 1 Keep notifications [RESET APPS]. From the Home screen, u [Settings]u[Apps & notifications] u[Configure notifications].
Do Not Calls Disturb*2 SMS, MMS, and messaging apps See all exceptions Restrict notifications Default duration Schedules TURN ON NOW/TURN OFF NOW Set the conditions to allow the incoming call operations when Do Not Disturb is ON. Set the conditions to allow the notification sound and vibration for +Message when Do Not Disturb is ON. Set to allow the sound and vibration when Do Not Disturb is ON. Set the notification operations when Do Not Disturb is ON.
Display the elapsed time from the last full charge to the present time. Screen usage Display the time used by the since full charge screen from the last full charge to the present time. Last full charge * The display may differ depending on usage condition. ❖Information Power-saving function restricts the battery usage in background to reduce the battery consumption. If you want to avoid the effect of the power-saving function to applications, set them as exception.
Screen timeout Font size Display size Dark theme Auto-rotate screen Lock screen display Side sense* One-handed mode* Smart backlight control* Night Light* Set a time for turning off of screen. Set font size. Enlarge/reduce of the size of the icon etc. displayed in the screen. Apply the dark theme to the corresponding screen or display. P.55 P.178 P.179 P.75 Set the screen not to turn off when you hold the terminal in your hand but touch operation is not performed.
Adjusting the screen brightness 1 From the Home screen, u [Settings]u[Display]u[Brightness level]. 2 Tap the slider at a position you want to set, or drag it left or right. Setting Lock screen display Make settings for the lock screen and Ambient display. While Ambient display is ON, you can display an image in sleep mode or check date & time or notifications. 1 From the Home screen, u[Settings]u[Display]u[Lock screen display].
Show lockdown option*1 Display "Lockdown" option to the menu which is displayed when the power key is pressed for at least 1 second. You can disable unlock by Smart Lock or fingerprint authentication, or hide notifications when the screen lock is set by tapping "Lockdown". Add users from lock Set whether to add a screen guest or user from the Quick settings panel (P.68) on the lock screen when the unlocking method of the screen lock is "Pattern"/"PIN"/ "Password".
Select apps that work with gestures Improve prediction accuracy Set whether to allow use of Side sense for each application. Set whether to allow Xperia Intelligence engine to use location information for improving the application predictability in Side sense. * If selecting of the item is not available, once display the Side sense menu and then operate again. Sound 1 From the Home screen, u[Settings]u[Sound].
Vibrate for calls Set whether to vibrate the terminal while receiving a call. P.175 P.182 Do Not Disturb Phone ringtone Notification sound Default alarm ringtone Dial pad Set whether to emit sound tones* when tapping the dialpad. Screen locking sounds* Set whether to emit sound when pressing the power key to lock the screen, or unlocking the screen lock. Charging sounds and Set whether to notify of vibration* start of charging with sound and vibration.
Setting the ringtone/ notification sound/alarm ringtone 1 2 3 From the Home screen, u[Settings]u[Sound]. Tap any one of [Phone ringtone]/ [Notification sound]/[Default alarm ringtone]. Select a sound optionu[OK]. ❖Information To set a ringtone other than ringtone, notification sound, or alarm ringtone preset by default, tap [Add ringtone]/[Add notification]/[Add alarm] in Step 3. ･ A ringtone or notification sound selected in Step 3 sounds in the volume set in "Ring and notification volume".
❖Information To increase available memory of the internal storage by selecting files and applications to delete/uninstall them, tap [Internal shared storage]u[FREE UP SPACE]. ･ Tap [Internal shared storage]u[Files], or tap [USB drive]/[SD card] to display the data list. You can check the saved data or copy/move/delete/share the data (P.199). ･ To release the recognition of USB storage/microSD card, tap of "USB drive"/"SD card". To recognize again, tap [USB drive]/[SD card]u[MOUNT].
*3 Appeared when [Advanced] is tapped. However, it may appear without tapping [Advanced] depending on the operating condition. Google Location Use the current location sharing Sharing* function. * Appeared when [Advanced] is tapped. Location 1 2 3 From the Home screen, u[Settings]u[Location]. of "Use location". Read the attention on location information and tap [AGREE]. Display applications or services which use the recent location information data.
SIM card lock*2 P.49 The internal storage is encrypted by default. Display the type of credential storage*4. Display trusted CA credentials. Manage the user credentials saved in the terminal. Install from Install certificates. SD card Clear Clear all certificates or credentials credential information stored in the credential storage.* 5 Trust agents*3 Set whether to enable Trust agent when the screen lock unlocking method is set to "Pattern"/"PIN"/ "Password".
of "Screen lock" as required. ■ To turn off the screen lock Make pattern Set whether to show pattern when the Home screen, u 1 From visible* entering pattern. [Settings]u[Security]u[Screen Lock after screen Set the time from when the screen lock]uEnter the set unlock timeout turns off to when the screen is pattern/PIN/passwordu[None]u locked automatically. [YES, REMOVE]. 4 Tap Power button instantly locks Set whether to instantly lock the screen when the screen is turned off by pressing the power key.
Setting up fingerprint authentication The terminal has a fingerprint sensor (P.32) and you can unlock the screen lock with the fingerprint authentication, touching it with the registered finger. Notes on using fingerprint authentication Your terminal recognizes a fingerprint based on its unique characteristics. For this reason, some users may not be able to use fingerprint authentication if their fingerprints are not sufficiently unique.
❖Information Registering your fingerprint 1 From the Home screen, [Settings]u[Security]u [Fingerprint Manager]. ･ 2 u If you have already registered fingerprint, the entry screen for unlocking the screen lock appears. Enter the unlocking method to display the Fingerprint Manager screen. Select the screen lock unlocking method. After this step, follow the onscreen instructions. When the registration is complete, the screen indicating addition of the fingerprint appears.
docomo service/cloud 1 From the Home screen, u [Settings]u[docomo service/ cloud]. Set up your d ACCOUNT to use docomo applications (P.47). You can also use your biological information (fingerprint) registered on the terminal to set up your d ACCOUNT. docomo cloud Make settings for docomo cloud compatible service. docomo Set whether to use the function of Application Data automatic back up/restore data of Backup docomo apps, or check the list of apps whose backup data stored.
Accounts 1 From the Home screen, u[Settings]u[Accounts]. Add account Automatically sync data P.190 P.190 Adding accounts Add or remove online service accounts. ･ Set up your Google account (P.46) ･ Auto-sync data (P.190) 1 From the Home screen, u[Settings]u[Accounts]u[Add account]. 2 Tap the account type. ･ After this step, follow the onscreen instructions. ❖Information ･ docomo account is set by default. ❖Information You cannot remove the docomo account.
Accessibility 1 From the Home screen, u[Settings]u[Accessibility]. Volume key shortcut Osusume hint Text-to-speech output Font size Display size Dark theme Magnification Color correction Color inversion Large mouse pointer Set whether to enable activation of accessibility function using the volume key shortcut, or set shortcut services to be activated. Set whether to use Osusume hint service. ･ Use setting is required in advance (P.189). P.192 Set font size.
Caption preferences High contrast text Set whether to display the captions or set the language, font size for captions. Set whether to show characters clearly against the background color. * If the terminal goes into sleep mode during a call with "Power button ends call" is ON, you can end the call by pressing the power key to wake the terminal and then pressing the power key again. Setting Text-to-speech output 1 From the Home screen, u [Settings]u[Accessibility]u [Text-to-speech output].
Digital Wellbeing & parental controls You can prevent from overusing the terminal by checking your usage habits of the terminal, managing the usage time with the tool such as the app timer. Also, you can set the use restriction by guardian. 1 2 From the Home screen, u[Settings]u[Digital Wellbeing & parental controls]. Check and set each item. Google Check, change, or delete information or settings related to your Google account and the services. 1 2 From the Home screen, u[Settings]u[Google].
Languages & input System 1 From the Home screen, [Settings]u[System]. Languages & input Gestures Date & time Backup Back up to Google Drive Account*1 Reset Reset options*2 network settings Reset app preferences Erase all data (factory reset) Multiple users*2 System update*2 Application update*2 u P.194 P.195 P.196 Set whether to back up data of applications, settings of the terminal, etc. to Google Drive. Set an account for backup to Google Drive.
Pointer speed* Text-to-speech output* Set speed of the pointer when using a mouse (commercially available) etc. P.192 * Appeared when [Advanced] is tapped. Changing the phone language 1 2 3 From the Home screen, u [Settings]u[System]u[Languages & input]u[Languages]. [Add a language]uSelect the languageuSelect the country or region as required. Drag of the language to the top layer ("1" position).
Date & time ･ To set date, time, time zone or 24-hour format manually, turn off "Use network-provided time", "Use network-provided time zone", or "Use locale default". 1 From the Home screen, u [Settings]u[System]u[Date & time]. Adjust date and time automatically by using network-provided information. Date Set date manually. Time Set time manually. Use networkAdjust time zone provided time zone automatically by using network-provided information. Time zone Set time zone manually.
❖Information Add user Some preinstalled contents can be re-downloaded. To download, from the Home screen, tap u （ブラウ [Xperia Lounge Japan]u u[ サポート ザで開きます）(Support (Open the window by the browser))]u[ スマートフォン／タブレット関連（プリイ ンストールコンテンツなどの再ダウンロード）(For smartphone/tablet (For re-downloading preinstalled contents))]u[ ドコモ (DOCOMO)] (in Japanese only) and then select the terminal on the displayed screen.
About phone 1 From the Home screen, u[Settings]u[About phone]. Register a name of the terminal. Phone number Your own phone number is displayed. Emergency information Register your blood type or the other information that can be useful for initial response in emergency or the contacts for emergency. Legal information Check third party's licenses or Google terms of use, etc. Certificates P.234 Detailed Diagnostics Set whether to send detailed diagnostics data of the terminal.
File management Storage structure Phone (Internal shared storage) Folders in the internal storage (/storage/ emulated/0) by default are as follows. ･ Displayed folders may differ depending on the terminal operations. Alarms Android DCIM Download Movies Music Notifications Pictures Podcasts Ringtones Stores alarm sounds etc. Stores setting data for system or each application, temporary files, etc. Stores still pictures/videos shot by Camera. Stores downloaded data through the web browser.
■ 1 2 3 4 5 ■ 1 2 3 4 5 Creating a folder From the Home screen, u[Files]. uTap the category or storage. Tap the folder as required. u[New folder]. Enter a folder nameu[OK]. ■ 1 2 3 4 5 Renaming a folder or file From the Home screen, u[Files]. uTap the category or storage. Tap the folder as required. Touch and hold a folder or file you want to rename. u[Rename]uEnter a nameu [OK]. ■ 1 2 3 4 5 6 Deleting a folder or file From the Home screen, u[Files]. uTap the category or storage.
Keep the Bluetooth device approximately 10 m or more away from a wireless LAN device. ･ Within approximately 10 m, turn off either the Bluetooth device or the wireless LAN device. ･ Data communication Bluetooth function Bluetooth function is a technology which enables to connect with Bluetooth device such as PC, handsfree headset wirelessly. ･ The terminal does not connect wirelessly with all types of Bluetooth devices. ･ Supported Bluetooth profiles (P.
1 From the Home screen, u [Settings]u[Device connection]u [Pair new device]. Detected Bluetooth device names are displayed in "Available devices". 1 Tap a name of Bluetooth device for pairing. Confirm the Bluetooth pairing code (pass code) on the confirmation screenu[PAIR]. 2 ･ 2 3 ･ ■ Connecting the terminal with a Bluetooth device Paired Bluetooth device names are displayed in "Currently connected".
Sending/Receiving data via Bluetooth function Turn on Bluetooth function in advance, then pair with a target Bluetooth device. Sending data via Bluetooth function 1 [Bluetooth] from the sharing menu of each application. 2 Tap the other Bluetooth device. Receiving data 1 Send data from the other Bluetooth device. ･ 2 appears on the status bar. Drag the status bar down u[Incoming file]u[ACCEPT].
External device connection 2 Connecting to PC Connect to a PC to exchange data between the internal storage or the microSD card and a PC. Appeared screen may vary depending on the operating system (OS) of a PC. ･ You may not be able to operate copyrighted data of images, music, etc. Connecting to PC with USB cable A to C ･ The following operating systems (OS) are supported. - Microsoft Windows 10 - Microsoft Windows 8.
International roaming Overview of International roaming (WORLD WING) With the international roaming (WORLD WING), you can use the terminal without changing phone number or mail address in the service area of the overseas network operator affiliated with DOCOMO. You do not need to change the settings of call and SMS. For details of International Roaming Service (WORLD WING), refer to NTT DOCOMO website. https://www.nttdocomo.co.
Before using overseas Advance preparation Network service settings Before leaving Japan To use the terminal overseas, check the following in Japan. ■ Subscription ･ ■ Charging ･ ■ Check if you subscribe WORLD WING. For details, contact "General Inquiries" on the last page. For charging, refer to NTT DOCOMO website. Usage charge Overseas usage charges (call and packet communication) differ from those in Japan. For details, refer to NTT DOCOMO website.
After arriving overseas When you arrive overseas and turn on the terminal, the terminal connects an available network automatically. Connectivity When "Automatically select network" (P.207) is set to ON, the most suitable network will be selected automatically. Setting network By default, the terminal automatically searches available network and connect to it. To switch network manually, set as follows.
Setting the preferred network type 1 2 3 From the Home screen, u [Settings]u[Network & internet]. [Mobile network]u[Advanced]u [Preferred network type]. Select the preferred network type to set. ･ Select "5G/4G/3G/GSM" to switch available network type automatically. Using VoLTE during international roaming Set to enable VoLTE when VoLTE is available during international roaming. 1 2 From the Home screen, u [Settings]u[Network & internet]. [Mobile network]u of "4G Calling".
Making/Receiving a call in the country you stay When you arrive overseas and turn on the terminal, an available network is automatically set. ･ Check that the battery and signal levels are high enough. ･ Depending on the network operator, even if the Caller ID notification is active, the caller ID may not be notified or appear properly. In this case, calls cannot be made from the call history.
3 4 . ･ Making a call to WORLD WING user overseas When the International dial assist screen is displayed, tap [CALL]. When the call is finished, . Making a call within the country you stay You can make a call by entering the phone number of the other party's land-line phone or mobile phone in the same way you do in Japan. 1 2 3 4 From the Home screen, Enter a phone number. ･ u To make a call to land-line phone, enter the area code (city code), other party's phone number in order. . ･ .
Making a call from the other party ■ To have the other party make a call from a land-line phone or mobile phone in Japan to the terminal in the country you stay, the other party only needs to dial the phone number as in Japan.
Setting International dialing assist 1 2 3 From the Home screen, u . [Settings]u[Calls]u[Roaming settings]. [International dial assist]. Auto Set whether to automatically add the conversion country code set in "Country code". Country code Select a country code used for auto conversion. Setting Network service (overseas) Set network service such as voice mail from overseas. ･ You need to set "Remote operation settings" (P.108) to "Activate Remote operation" in advance.
After returning to Japan After returning to Japan, restore to the settings which are made before you traveled. ■ When using packet communication overseas Turn off "Data roaming" (P.207). ■ If you cannot connect to DOCOMO network automatically after returning to Japan Set "Preferred network type" (P.208) to "5G/4G/3G/GSM". ･ Turn on "Automatically select network" (P.207).
Appendix Troubleshooting Troubleshooting When you have a vague idea of malfunctioning, you can perform diagnosis by yourself. For details, refer to NTT DOCOMO website. ･ Check if the software update is necessary for the terminal. If necessary, perform the software update (P.223). ･ When checking the following items not to improve the state, contact the phone number given in "Repairs (Inquiries/Request)" on the last page of this manual (in Japanese only) or a DOCOMO-specified repair office.
■ Charging Phenomenon Cause and handling Cannot charge ･ Check if the adapter's power (The notification plug is correctly inserted to a LED does not power outlet or accessory turn on, or the socket. ･ Check if the adapter and the icon does not indicate charging terminal are set correctly. → P.42 ･ When using an AC adapter status) (optional), check if the Type-C plug of the AC adapter is connected to the terminal correctly. → P.42 ･ When using the USB cable A to C 02 (optional), check if a PC is turned on.
■ Terminal operation Phenomenon Cause and handling ･ While calling, depending on the Become hot while operating/ radio wave condition or call charging duration time, the terminal may become hot around the earpiece/speaker. This condition is not abnormal. ･ While operating or charging, or if you use applications, record videos, etc. for a long time while charging the battery, the terminal, internal battery or adapter may become hot. It is not a problem for operation. You can continue to use the terminal.
Phenomenon Operations are not possible when tapping or pressing keys The screen reacts slowly when you tap or press the keys Cause and handling Check if the power is turned off. → P.44 ･ Check if you activate the screen lock. → P.185 When large amount of data is saved in the terminal or transferring large-size data between the terminal and microSD card, the reactions on the screen may be delayed.
Phenomenon Applications cannot be operated properly (applications cannot be activated, or errors occur frequently) ■ Cause and handling Are there any applications being disabled? Enable disabled applications, then retry. → P.173 ･ Are the permissions for the application granted? → P.57, P.172 ･ Phone call Phenomenon Cannot make a call even if you tap The ringtone does not sound Cause and handling Check if you activate Airplane mode. → P.168 Is "Ring and notification volume" set to the minimum? → P.
■ Display Phenomenon The display is dim ■ ･ ･ ･ ･ ･ ■ Cause and handling Check if "Screen timeout" is set in short time period. → P.177 Check if the brightness of screen is changed. → P.178 When "Adaptive brightness" is ON, screen brightness is changed according to the ambient brightness. → P.176 Check if you cover the Proximity/ Light sensor with a sticker etc. → P.32 When the temperature of the terminal becomes high while using, the display may become darker. It is not abnormal.
■ International roaming Phenomenon Cannot use the terminal overseas (when is displayed) Cannot use the terminal overseas (when is displayed) Cause and handling Do you subscribe to WORLD WING? Check if you subscribe to WORLD WING. ･ Check if you are out of the international roaming service area or in an area with poor radio waves. Check if the service area and network operator are available or not, refer to NTT DOCOMO website. ･ Change the network settings or overseas network operator settings.
■ Bluetooth function Phenomenon The terminal cannot be connected to a Bluetooth device/A Bluetooth device cannot be found by search Cause and handling Allow Bluetooth device (commercially available) to be detectable and then make pairing with the device on the terminal. If you want to cancel a paired device and then make the pair setting again, cancel the pair settings on both the terminal and the Bluetooth device (commercially available). → P.
Error messages Error messages Cause and handling ･ The terminal is out of service No service area, or radio wave does not reach. Move to a location where radio wave can be reached. ･ The docomo nano UIM card is not working properly. Removing and inserting docomo nano UIM card may solve the problem. If the problem persists, contact "Repairs (Inquiries/Request)" on the last page of this manual (in Japanese only). Mobile network Install docomo nano UIM card not available correctly (P.
Software Update ･ Software Update Software update* is a function which updates the software so as to use the terminal safer and more comfortable. The followings are included. Be sure to update the software to the latest one. There are the following 4 types' updates for Software update. * On the terminal, it is displayed as System update.
Updating the software Starting the update To start updating, perform the either operation in the following. ･ From the update notification From the status bar of the terminal, tap the notification to start updating. ･ From the screen which appears on a regular basis When updating the terminal is available, the confirmation screen may appear. Select the operation in the confirmation screen to proceed with the update.
3 Notification of update completion. When the update is complete, the completion screen appears on the terminal. ･ After the Android OS version upgrade, check if there are updates of the applications that you have installed personally. Without updating them, operations may become unstable or functions may not work properly. ･ Notes Once the software update is complete, you cannot restore the previous software.
Connecting to a PC to update To update by connecting a PC, install the software (Xperia Companion) to execute "software update" on the PC. Connect the terminal and a PC via USB cable A to C 02 (optional) and then follow the oncsreen instructions to install. Warranty and After Sales Services Warranty The terminal comes with a year's warranty starting from the date of purchase. ･ The specifications and the outer appearance of the terminal are subject to change for improvement without prior notice.
b Even if the warranty period has not expired, a fee will be charged for repair under the following circumstances. 1. The malfunction or damage is due to modification (including alteration of software) of the product. 2. The malfunction or damage is due to damage of the terminal body, display, external connection jack, etc. caused by being dropped or subjected to an external pressure, or the malfunction or damage is due to breakdown or deformation of the internal circuit board of the terminal. 3.
After Sales Services If you have problems with the terminal Before asking repair, see "Troubleshooting" (P.214) in this manual to check the problem. If the problem still persists, contact "Repairs (Inquiries/Request)" on the last page (in Japanese only). If repair is required resultingly Bring the terminal to the DOCOMO-specified repair office. However, it must be taken during business hours of the repair office. Note that repair may take some days depending on the problem.
● Note that the settings and other information may be reset (cleared) as a result of malfunction, repair or other handling. In this case, make the settings again. In that case, packet communication charge may incur depending on the settings. ● After the repair, Wi-Fi MAC address or Bluetooth address may be changed regardless of the repaired parts. ● Take care not to let an object that is easily affected by magnetism, such as a cash card near the terminal because the card may become unavailable.
あんしん遠隔サポート (Anshin Enkaku Support) By sharing screens of your terminal with an operator of Anshin Enkaku Support center, you can receive technical support to make settings, use applications, or connect peripheral devices such as PC. (in Japanese only) ･ This service is not available when your docomo nano UIM card is not inserted, during international roaming, or in Airplane mode. ･ Anshin Enkaku Support is a paid service requiring subscription. ･ Some operations and settings are not supported.
Checking in Q & A site 1 2 From the Home screen, Main specification u[ 遠隔サ ポート (Enkaku support)]. [Q&A サイト／アプリで調べる (Check with Q&A site/app)]. 2 From the Home screen, 2 The terminal u[ 遠隔サ ポート (Enkaku support)]. [LINE]. Weight Display Inquiring via +Message 1 ■ Product name Size Inquiring via LINE 1 Changes may occur because of software update, etc. For the latest information, refer to NTT DOCOMO website. From the Home screen, ポート (Enkaku support)]. [+Message].
Continuous 4G (LTE) call time*3*4 Charging time Wireless LAN Standards MIMO support MU-MIMO (client) support MIMO support Bluetooth MU-MIMO (client) standards Version Radio power Supported profile Codec*6 (version) LTE (VoLTE) : Approx.1,240 min. LTE (VoLTE (HD+)) : Approx.1,250 min. AC Adapter 07 : Approx. 135 min. Compliant with IEEE802.11a/b/g/n/ac/ax (Corresponding frequency band to IEEE802.11n/ax : 2.
Recording Video file format Still image Maximum recording time per one video Zoom Video (digital) MP4 JPEG, RAW*8 Approx. 360 min.*9 Camera : Up to approx. 3.0 x Front camera : ― Still image Camera : Up to approx. 3.0 x Front camera : ― Zoom Video Camera : Up to approx. (optical) 3.0 x Front camera : ― Still image Camera : Up to approx. 3.0 x Front camera : ― Zoom Video Camera : Up to approx. (digital × 9.0 x optical) Front camera : ― Still image Camera : Up to approx. 9.
■ Display language Bosnian/Catalan language/Czech/Danish/ German/Estonian/English/Spanish/ Filipino/French/Croatian/Indonesian/ Icelandic/Italian/Latvian/Lithuanian/ Hungarian/Malaysian/Dutch/Norwegian (language for books)/Polish/Portuguese/ Romanian/Albanian/Slovakian/Slovenian/ Serbian/Finnish/Swedish/Vietnamese/ Turkish/Greek/Bulgarian/Kazakh/ Macedonian/Russian/Ukrainian/Hebrew/ Arabic/Persian (Dari language)/Marathi/ Hindi/Bengali/Tamil/Telugu/Kannada/ Malayalam/Thai/Korean/Japanese/Chinese (Simplifie
Specific Absorption Rate of Mobile Phone, etc. Specific Absorption Rate (SAR) Information of Mobile Phones This model xx-xxx mobile phone complies with the Japanese technical regulations and the international guidelines regarding human exposure to radio waves. This mobile phone was designed in observance of the Japanese technical regulations regarding exposure to radio waves(*1) and the limits of exposure recommended in the international guidelines, which are equivalent to each other.
Please refer to the WHO website if you would like more detailed information. https://www.who.int/peh-emf/publications/ factsheets/en/ Please refer to the websites listed below if you would like more detailed information regarding SAR. Ministry of Internal Affairs and Communications Website: https://www.tele.soumu.go.jp/e/sys/ele/ index.htm Association of Radio Industries and Businesses Website: https://www.arib-emf.org/01denpa/ denpa02-02.html (in Japanese only) NTT DOCOMO, INC. Website: https://www.
power level in all used frequency bands. While there may be differences between the SAR levels of various phone models, they are all designed to meet the relevant guidelines for exposure to radio waves. The highest SAR value as reported to the authorities for this phone model when tested for use by the ear is 0.25 W/kg*, when worn on the body is 0.58 W/kg* and when WiFi hotspot mode is 0.83 W/kg. For bodyworn operation, this phone has been tested and meets the FCC RF exposure guidelines.
Europe This mobile phone model xx-xxx has been designed to comply with applicable safety requirements for exposure to radio waves. These requirements are based on scientific guidelines that include safety margins designed to assure the safety of all persons, regardless of age and health. The radio wave exposure guidelines employ a unit of measurement known as the Specific Absorption Rate, or SAR.
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ･ Reorient or relocate the receiving antenna. ･ Increase the separation between the equipment and receiver.
Sony Mobile and its third party suppliers and licensors retain all rights, title and interest in and to the Software. To the extent that the Software contains material or code of a third party, such third parties shall be beneficiaries of these terms. This license is governed by the laws of Japan. When applicable, the foregoing applies to statutory consumer rights.
Intellectual Property Right About the Copyright and Portrait rights Copyrighted contents you recorded or obtained from sites or Internet home pages using this product by downloading or other means, such as documents, images, music data, software, are prohibited from reproduction, transformation and transmission over public lines without consent of the copyright holders, unless intended for personal use or any other purpose permitted by law.
PlayStation and DUALSHOCK are trademarks or registered trademarks or Sony Interactive Entertainment Inc. ･ Sony, Xperia, CinemaWide, FeliCa, Reader, DSEE Ultimate, STAMINA, and the Video & TV SideView logo are trademarks or registered trademarks of Sony Corporation. ･ microSD logo, microSDHC logo and microSDXC logo are trademarks of SD-3C, LLC. ･ USB Type-C™ is a trademark of USB Implementers Forum. ･ is a registered trademark of FeliCa Networks, Inc.
iPhone is a trademark of Apple Inc., registered in the U.S. and other countries. The iPhone trademark is used under license from AiPhone Co., Ltd.
Index A About phone ････････････････････････ 198 Access point Initializing ･････････････････････････ 165 Setting････････････････････････････ 165 Accessibility ･････････････････････････ 191 Accounts ････････････････････････････ 190 Add account ･････････････････････････ 190 Adjusting sound volume ･･･････････････ 181 Airplane mode ･･･････････････････････ 168 Alarm ･･･････････････････････････････ 155 Alarm ringtone ･･･････････････････････ 182 Alarm volume ････････････････････････ 181 Amazon Kindle ･････････････
Answering with Answering Machine ･･･ 103 Audio output ･･････････････････････ 105 Calling screen ･･････････････････････ 104 Declining a call ･････････････････････ 103 Ending ････････････････････････････ 104 Hold call ･･････････････････････････ 104 Incoming screen ････････････････････ 102 Making a call ･･･････････････････････ 100 Mute ･････････････････････････････ 104 Receiving ･････････････････････････ 102 Speaker ･･･････････････････････････ 105 Call Blocking ･････････････････････････ 108 Call forwarding ser
Disney DX ････････････････････････････ 96 Display･･････････････････････････････ 176 Display (touch screen) ･･････････････････ 50 Drag･･･････････････････････････････ 50 Flick ･･･････････････････････････････ 50 Pinch ･･････････････････････････････ 51 Scroll ･･････････････････････････････ 51 Slide･･･････････････････････････････ 50 Swipe･･････････････････････････････ 50 Tap ････････････････････････････････ 50 Touch and hold ･･････････････････････ 50 dmarket･････････････････････････････ 145 dmenu ･･･････････････
Settings (docomo LIVE UX) ････････････ Simple Home ･･･････････････････････ Wallpaper (docomo LIVE UX) ･･･････････ Wallpaper (Xperia Home) ･･････････････ Widget (Xperia Home) ････････････････ Xperia Home ････････････････････････ Home Settings (Xperia Home) ････････････ 80 87 80 86 86 84 87 I iD application ････････････････････････ 150 Imaging Edge Mobile ･･･････････････････ 97 In-call volume Setting････････････････････････････ 181 Initial settings ･････････････････････････ 45 International call Making a ca
Notification volume ･･･････････････････ 181 Nuisance call blocking service ･･･････････ 108 O One-handed mode ･････････････････････ 75 Osaifu-Keitai ･････････････････････････ 147 Lock ･･････････････････････････････ 149 Osaifu-Keitai compatible service ･･･････ 149 Settings ･･･････････････････････････ 148 Osusume Apps ････････････････････････ 82 P Personal dictionary･････････････････････ 63 Phone Ringtone volume ･･･････････････････ 103 When an application is running････････ 104 Phonebook ････････････････････
PIN code ･･･････････････････････････ 48 PIN Unlock Key (PUK code) ････････････ 49 Setting menu ････････････････････････ 159 Sheets ･･･････････････････････････････ 93 Shooting photos ･･････････････････････ 131 Shooting videos ･･････････････････････ 133 Side sense ････････････････････････････ 51 Multi-window menu･･････････････････ 54 Setting････････････････････････････ 179 Side sense menu･････････････････････ 53 Silent mode･･･････････････････････････ 55 SIM card lock ･･････････････････････････ 49 SIM unlock ･
Wi-Fi Direct ･･････････････････････････ WORLD CALL ････････････････････････ World clock ･･････････････････････････ WORLD WING ････････････････････････ 163 102 156 205 X Xperia cover ･･････････････････････････ Xperia guide ･･････････････････････････ Xperia Lounge Japan ･･･････････････････ Xperia Transfer 2 ･･･････････････････････ 98 98 98 98 Y YouTube ･････････････････････････････ 98 YT Music ･････････････････････････････ 98 Symbols +Message ･･･････････････････････････ Deleting a message ･･･････････････
Check usage charge, usage status, subscription information, or make various application online The terminal: d メニュー (dmenu) u [My docomo（お客様サポート）(My docomo (Customer support))] PC: My docomo (https://www.nttdocomo.co.jp/mydocomo/ ) (in Japanese only) * There are cases where the site may not be available due to system maintenance, etc. * To use "My docomo", "Network security code" and "ID/password of d ACCOUNT" are required. Don't forget your mobile phone ...
General Inquiries 0120-005-250 (toll free) *Service available in: English, Portuguese, Chinese, Spanish. *Unavailable from part of IP phones. (Business hours: 9:00 a.m. to 8:00 p.m.) Repairs (Inquiries/Request) ■From DOCOMO mobile phones (In Japanese only) (No prefix) 113 (toll free) *Unavailable from land-line phones, etc.
