INSTRUCTION MANUAL
Introduction Thank you for your purchase of "SO-03J". For proper use of the SO-03J, read this manual carefully before and while you use the SO-03J. About manuals of SO-03J ● " クイックスタートガイド (Quick Start Guide)" (Supplied accessories) Part names and functions are explained. ● "Instruction Manual" (Application of the terminal) Operations and settings of each function are explained. To use "Instruction Manual" application, from the Home screen, u [Instruction Manual].
Operation descriptions In this manual, keys and key icons are described with O ,k ,b ,h ,n . And operations for selecting icons or items in the key operations on the screens are described as follows. Description Press and hold k for at least 1 second. On the TV watching screen, b . From the Home screen, u [Settings]u [About phone]. Operation Press and hold Camera key (k ) on the side of the terminal for at least 1 second. On the TV watching screen, .
Supplied accessories ・ ・ 安全上/取り扱い上のご注意 (Notes on usage, Safety/Handling precautions) (In Japanese only) SO-03J (with warranty) ・ ・ クイックスタートガイド (Quick Start Guide) (In Japanese only) SO-03J のご利用にあたっての注意事項 TV antenna cable SO01 You can check or purchase optional accessories compatible with the terminal (optional) in the DOCOMO online shop. https://www.mydocomo.com/onlineshop/ options/index.
Contents ■ ■ ■ Supplied accessories. . . . . . . . . . . . . . . . . 2 About using the terminal . . . . . . . . . . . . 5 Safety Precautions (Always follow these directions) . . . . . . . . . . . . . . . . . . . . . . . . . . 7 ■ Handling precautions. . . . . . . . . . . . . . . 17 ■ Waterproofness/Dustproofness . . . . . 24 Before Using the Terminal . . . 30 Part names and functions................................................30 docomo nano UIM card....................................................
docomo backup ................................................................. 150 Settings . . . . . . . . . . . . . . . . . . . 154 Viewing the setting menu............................................ 154 Wireless & networks.......................................................... 154 Themes & wallpaper......................................................... 164 Device........................................................................................ 164 Accounts & services.......................
Contents/Precautions About using the terminal ・ The terminal supports LTE, W-CDMA, GSM/ GPRS and Wireless LAN Systems. ・ Because a terminal operates using radio frequencies, it cannot be used inside a tunnel, underground, in a building or other locations where radio waves do not reach the terminal, in locations with weak radio wave condition, or out of LTE/FOMA service area.
・ This terminal has FOMA Plus-Area and FOMA HIGH-SPEED Area support. ・ The terminal does not support i-mode sites (programs) or i-Dppli. ・ The terminal automatically performs communication for synchronizing data, checking the latest software version, and maintaining a connection with the server, and for other purposes. If you transmit a large amount of data, such as when downloading applications or watching video, a packet communication charge becomes high.
・ For services provided by Google, refer to Google Terms of Service. For other web services, refer to each terms of service. ・ When a license agreement screen etc. appears, follow the onscreen instructions. ・ Applications and service contents are subject to change without prior notice. ・ The terminal supports only sp-mode, mopera U and Business mopera Internet. Other providers are not supported. ・ If you want to use tethering, subscription to Packet Pack/packet flat-rate service is strongly recommended.
*1 Serious injury: This refers to loss of sight, injury, burns (high- and low temperature), electric shock, broken bones, injuries with residual aftereffects from poisoning, etc., and injuries requiring hospital admission for treatment or long-term hospital attendance as an outpatient. *2 Minor injury: This refers to injuries, burns (high- and low-temperature), electric shock, etc. that do not require hospital admission for treatment or longterm hospital attendance as an outpatient.
Don’t Do not splash sand, soil or mud, or do not directly place the equipment on them. Also, do not touch the equipment with hands with sand etc. adhered. Doing so may cause fire, burns, injury, electric shock, etc. For waterproofness/dustproofness, see the following. ⇒ P.24 "Waterproofness/Dustproofness" Do WARNING Don’t Don’t No disassembly Do not charge the terminal when it is wet with liquids such as water (drinking water, sweat, seawater, urine of pet animals, etc.).
Do Do Power off the terminal before you step into a place where flammable gas generates such as gas stations, or a place where dusts are generated. Stop charging if you charge the battery. Using the terminal in a place where flammable gas generates may cause explosion, fire, etc. When using Osaifu-Keitai in a place such as a gas station, power off the terminal before using it. (If you set "NFC / Osaifu-Keitai lock", cancel the lock and then power off the terminal.
2. Handling the terminal WARNING DANGER Don’t Don’t Do Do Do not throw the terminal into fire or apply heat. Doing so may cause fire, burns, injury, etc. because of ignition, burst, heat or leaking of the internal battery. Do not put excessive force such as sticking a nail (sharp object) into the terminal, hitting it with a hammer (hard object), or stepping on it. Doing so may cause fire, burns, injury, etc. because of ignition, burst, heat or leaking of the internal battery.
Do Do Do Do Power off the terminal or put it in Airplane mode before boarding an airplane. Use of mobile phones on board is restricted. Follow the instructions of each airline. Failure to do so may adversely affect on-board electronic equipment. Prohibited acts related to mobile phone usage on an airplane may be punished by law. Follow the instructions of each medical facility for the use of mobile phones on their premises. Power off the terminal in a place where the use is prohibited.
Do Be careful not to allow a pet etc. to bite the terminal. Doing so may cause fire, burns, injury, etc. because of ignition, burst, heat or leaking of the internal battery. Don’t CAUTION Don’t Don’t Don’t When using the motion sensor, check the safety around you, hold the terminal firmly, and do not shake it unnecessarily. Failure to do so may cause accident such as injuries.
3. Handling the adapter WARNING Don’t Don’t Don’t Don’t Don’t Don’t Do not use the adapter cord if it gets damaged. Doing so may cause fire, burns, electric shock, etc. Don’t When you insert/remove a plug of AC adapter to/from power outlet, do not let it to contact with metal objects. Doing so may cause fire, burns, electric shock, etc. Don’t Do not connect the voltage converter for overseas travel (travel converter) to the AC adapter. Doing so may cause ignition, overheating, electric shock etc.
Do Do Do Do Do Do When replacing a fuse in a DC adapter, make sure to use the specified fuse. Using a fuse other than specified may cause fire, burns, electric shock, etc. For the specified fuse, check a manual that comes with a DC adapter. Clean dust from the power plug. Using it with dust adhering may cause fire, burns or electric shock. When you connect the adapter or accessory socket to a power outlet, insert it firmly. Insecure inserting may cause fire, burns, electric shock, etc.
5. Handling the terminal near electronic medical equipment WARNING Do Do Do If you use an implantable cardiac pacemaker or implantable cardioverter defibrillator, keep the terminal 15 cm or more away from the implant at all times. The radio waves from the terminal may affect the performance of electronic medical equipment.
Part Earpiece/speaker, Speaker Camera ring (back side) mark sticker Rubber gaskets of docomo nano UIM card/microSD card slot docomo nano UIM card/microSD card tray TV antenna cable (headset jack : top side, connector plug: top side) TV antenna cable (headset jack : body, cable, connector plug: body) TV antenna cable (connector plug : metal section) PET resin Surface treatment Coating Stainless PVD Material Handling precautions ■ Common precautions ・ PET resin ― Silicon rubber ― Polyacetal PP resin
・ ・ ・ ・ ・ Clean the terminal with a dry soft cloth (such as used for cleaning eyeglasses). - Do not rub it roughly with a dry cloth. The display may be damaged. - Drops of water or dirt left on the display may cause stains. - Do not use alcohol, thinner, benzine, cleaning detergent, etc. to clean the terminal. These chemicals may erase the printing on the terminal or cause discoloration. ・ ・ ■ Failure to do so may cause a malfunction or damage.
・ ・ ・ Back up information that you saved to the terminal to microSD card, a PC, or cloud, etc., or note down in a separate note and keep it safely. NTT DOCOMO is not liable for any loss of data saved in the terminal. Do not insert the plug of external device to the external connection jack at a slant when connecting. Or, do not pull the plug when they are connected. Doing so may cause malfunction or damage. The terminal could become warm while in use and charging. This condition is not abnormal.
・ ・ ・ The internal battery is a consumable part. Replace the internal battery if the terminal has extremely short operation time on a full charge, though it may vary by operating conditions. For replacing internal battery, contact "Repairs (Inquiries/Request)" on the last page (in Japanese only) or DOCOMO-specified repair office. Charge the battery in an environment with the proper ambient temperature (5℃ to 35 ℃ ).
・ ・ When you use the power outlet with a mechanism to prevent the plug from being removed, follow the instructions on the outlet's user's manual. ・ Do not subject the equipment to a strong impact. Do not deform the charging jack. ・ ・ Doing so may cause malfunction. ■ docomo nano UIM card precautions ・ ・ Do not use unnecessary force to insert/ remove the docomo nano UIM card.
・ Frequency band - Before using this equipment, confirm that "another station" is not being operated nearby. - In the event of the terminal causing harmful radio wave interference with "another station", promptly change the operating frequency or stop radio wave emission by turning off the power, etc. - If you have further questions, contact "General Inquiries" on the last page. The frequency band used by the terminals Bluetooth/wireless LAN function is written as follows: 2.
・ ・ 2.4GHz device cautions The operating frequency band of the WLAN device is used by industrial, scientific, consumer and medical equipment including home electric appliances such as microwave ovens, premises radio stations for identifying mobile units used in the manufacturing lines of plants (radio stations requiring a license), specified low power radio stations (radio stations requiring no license) and amateur radio stations (radio stations requiring a license).
■ Note ・ ・ ・ Do not use a remodeled terminal. Using a remodeled terminal violates the Radio Law/Telecommunications Business Act. The terminal is compliant with rules on the technical standard conformance of specified wireless equipment based on the Radio Law/ Telecommunications Business Act, and as a proof of it, the "Technical Compliance Mark " is depicted on the electronic nameplate of the terminal. To check the certificate, from the Home screen, u [Settings]u [About phone]u [Certificates].
What you can do with waterproofness/dustproofness of SO-03J ・ You can talk without an umbrella in the rain (for rainfall of 20 mm or less per hour). - Do not open or close the cover of docomo nano UIM card/microSD card slot with wet hands or with water droplets on the terminal. ・ You can wash the terminal when it gets dirt or stained with liquid other than tap water. - Wash the terminal with tap water at normal temperature (5 ℃ -35 ℃ ) by weaker water flow (less than 6 L/min.
To ensure waterproofness/ dustproofness To avoid water ingress, be sure to observe the following points. ・ Do not throw any liquid other than room temperature tap water on the terminal, or soak it in such liquid. ・ Firmly close the cover of docomo nano UIM card/microSD card slot. Even a fine obstacle (one hair, one grain of sand, tiny fiber, etc.) put between contact surfaces may allow water to enter.
■ Closing the cover of docomo nano UIM card/microSD card slot Push the tray all the way in the arrow direction and firmly press parts and make sure that there are no gaps between the terminal and the cover. Important precautions Do not perform actions shown in the illustrations below.
・ Do not move the terminal in water or slam the terminal against the surface of water. ・ If you put the terminal in tap water, be sure to have it within 30 minutes. ・ When you use the terminal in swimming pool, obey rules of the facility. ・ The terminal does not float on water. ・ Do not leave water on the terminal. In cold region, the terminal freezes up and may cause malfunction. ・ Do not leave water droplet on the earpiece/ speaker, microphone, speaker, second microphone, and headset jack.
c To wipe any water off the gaps or the following parts, tap the terminal against a dry, clean cloth or similar material about 10 times. ・ Earpiece/speaker ・ Microphone ・ Speaker ・ Second microphone ・ Headset jack ・ USB Type-C jack ・ Power key/Screen lock key/Fingerprint sensor ・ Volume key/Zoom key ・ Camera key ・ Cover of docomo nano UIM card/microSD card slot d Wipe off water drained from the terminal with dry, clean cloth etc., and dry naturally.
Part names and functions bc d e f l mno v p w Top q a r x y Bottom i s g j t k u h Left Front Right a docomo nano UIM card/microSD card slot b Notification LED → P.47 c NFC / Osaifu-Keitai position for holding over*1 → d e f g h i j k P.118 Front camera lens Earpiece/speaker Proximity/light sensor : Detects a face getting closer to the touch screen during a call and turns it off to prevent misoperation, and helps with automatic screen brightness control. Touch screen → P.
x Microphone y USB Type-C jack *1 A sticker bearing mark is attached at the time of purchase. *2 The antenna is built into the terminal. Covering around the antenna with your hand may affect the quality of communications. *3 A sticker bearing the CE mark, FCC ID, IMEI information, etc. is attached. Please do not peel off the sticker or remove the nameplate.
2 Pull the tray straight out from the terminal. 4 Turn the terminal horizontally and insert the tray with the card and press it straight into the slot. ・ 3 Be careful about the direction to insert of the tray. With the IC side facing up, place the docomo nano UIM card on the tray. ・ Make sure that the cut corner of the card is oriented properly. ・ Be sure to fit the docomo nano UIM card into the tray so that it does not shift.
Removing docomo nano UIM card 1 Remove the cover of docomo nano UIM card/microSD card slot (P.26). 2 Pull the tray straight out from the terminal. (P.32). 3 Remove the docomo nano UIM card from the tray. 5 Firmly press until the tray is all the way in, and make sure that there are no gaps between the terminal and cover (P.32). CE mark and FCC ID 1 Open the docomo nano UIM card slot cover, and insert a fingernail into the hook at the edge of the label tray, then pull it out straight.
Life of the internal battery Charging The internal battery is not fully charged at the time of purchase. ・ Estimated charging time (P.224) Operation time on full charge (estimate) The charging time varies by the internal battery condition or operating environment. ・ "Continuous standby time", "Continuous call time" (P.226) Continuous FOMA/3G stand-by time GSM LTE Continuous FOMA/3G call time GSM VoLTE call (voice) Stationary (Auto) : Approx. 650 hours Stationary (Auto) : Approx.
・ Use a compatible AC adapter or USB cable A to C for charging. If you use a charger other than compatible ones, charging may not be available or operations may not be performed correctly. ・ Insert and remove the AC adapter cord or USB cable A to C slowly and evenly so that excessive force is not applied. ・ When charging starts while the power is on, a sound to indicate the start of charging is heard, and the notification LED of the terminal turns on (P.47).
・ If regularity in your charging habit cannot be found, Battery Care does not start because incomplete of the learning and normal charging will be performed. ・ If you remove charging equipment during Battery Care charging, the terminal may not be fully charged. 2 Unfold the power plug of the AC adapter and insert it into a power outlet. Then place the terminal on the desktop holder.
❖Note ・ Connect the terminal correctly. Wrong connection may cause damage. ・ A terminal mounted on the desktop holder may be damaged if pressed hard against the holder. Attaching/Removing the attachment ■ 1 2 ■ 1 Charging with AC adapter When using AC Adapter 06 (optional) for charging, do the following procedures. 1 Attaching Check the shape of front/back of the attachment and the attaching part of the desktop holder, then fit the attachment with the desktop holder.
3 When charging is complete, remove the power plug of the AC adapter, and then remove the Type-C plug horizontally from the terminal. 2 Insert a USB plug of the USB cable A to C to a USB port of a PC. ・ A sound to indicate the start of charging is heard, and the notification LED of the terminal turns on (P.47). ❖Note ・ Connect the AC adapter correctly. Wrong connection may cause damage.
3 When charging is complete, remove the USB plug of the USB cable A to C from the USB port of PC and then remove the Type-C plug horizontally from the terminal. Turning power on/off Turning power on 1 ❖Note Press and hold O second. for at least 1 ・ The terminal vibrates and the lock screen appears after a while. ・ When you first turn on the power and " ようこそ (Welcome)" is displayed, follow the onscreen instructions to make initial settings (P.41). ・ Connect the USB cable A to C correctly.
・ When SIM card lock (P.175) is set, enter PIN code on the PIN code entry screen (P.175). ・ Also, when the screen backlight goes off after a specified time elapses, the terminal goes into sleep mode. You can change the time-out period for turning off the screen backlight (P.164). Turning power off 1 Press and hold O second. 2 [Power off]. for at least 1 Using a menu when pressing and holding O at least 1 second The following operations are available from the menu.
- Remote Initialization Service settings (not displayed if a docomo apps password is not set) - Install all apps setting Initial settings When you first turn on the power and " ようこ そ (Welcome)" is displayed, follow the onscreen instructions to make initial settings, such as individual functions and services. 1 2 [GET STARTED]. ・ Tap [ 日本語 (Japanese)] to change the language. ・ After this step, follow the onscreen instructions to configure the settings below, and then tap [NEXT] or [FINISH].
Basic operations Using the touch screen ■ Touch the screen and flick up/down or left/ right. ■ Touch screen is designed for being touched lightly with fingers. Do not push the touch screen hard with a finger or press sharp objects (nail, ballpoint pen, pin, etc.) against the screen. ・ Touching the touch screen may not work in the following cases. Note that it may cause malfunction.
Basic key icon operation b h n b h n Back Home History/ Task Go back to the previous screen. Or close a dialog box, an option menu, the Notification panel, etc. Go to the Home screen. Touch and hold the icon to open the "Google" application. Display thumbnails of recently used applications. You can activate or quit them here (P.67). * In this manual, each key icon operation is described ,h , and n .
Setting silent mode ・ Even when silent mode is on, the following sounds are not muted: the shutter sound; the sounds produced when starting and ending video recording; alarms; sounds from video and music; and the sound produced when you tap during a call. ・ Silent mode is canceled when you press the volume up key to turn up the volume. Silent mode (Vibrate) is canceled when you adjust the "Ring volume" (P.167) in "Sound & notification".
Capturing the displayed screen You can capture what is displayed on the screen (Take screenshot). 1 On the screen you want to capture, and the press and hold O volume down key at the same time for at least 1 second. ・ Screenshot is captured and in the status bar. appears ❖Information ・ Alternatively, press and hold O for at least 1 secondu Tap [Take screenshot] to capture a screenshot. ・ Drag the status bar downwardsu Tap [Screenshot captured.
Selecting an application to use If you have more than one application available when sending an email or displaying an image, an application selection screen appears. Selecting an application to send an email from the phonebook 1 2 3 From the Home screen, [ ドコモクラ ウド (docomo cloud)]u [docomo phonebook]u Tap "Contacts" tab u Select a contact. Select an email address. ・ An application selection screen appears. Select an applicationu [JUST ONCE]/[ALWAYS].
2 [DENY]/[ALLOW]. ・ Depending on the application/ function, multiple confirmation screens may appear or the display may be different. Check the displayed contents carefully and follow the onscreen instructions. ❖Information Notification LED Notification LED provides information on the terminal status, incoming calls, mail reception, etc. LED status Red ・ If permission is not granted, some applications/ functions may not work, or use of the functions may be limited.
Connected to a Wi-Fi network with P.156 no access to the Internet. The Wi-Fi signal is poor. Wi-Fi tethering is set P.160 Bluetooth function ON P.192 Connected to Bluetooth device P.193 Airplane mode activated P.154 Silent mode (Vibrate) ON P.44 P.44 Silent mode (mute) is set/Do not disturb function*2 is set to [Alarms only] or [Priority only] Do not disturb function*2 is set to ― "Total silence" Speakerphone ON P.89 Microphone put on mute P.89 Alarm is set P.149 NFC Reader/Writer, P2P function ON P.
*2 Set from the quick setting tool of the quick settings panel (P.51). Before using, tap [EDIT] and set "Do not disturb" as an available quick setting tool. ❖Information ・ You can select icons to be displayed in the status bar in "System icons" (P.165). Notification icon The main notification icons displayed on the status bar are as follows.
Missed call P.92 Message is recorded in Answering P.87, P.92 Machine New voice mail ― Event notification for Schedule P.148 Stopwatch is running/Timer is in use P.149 Alarm is in snooze mode or sounding P.149 Playing a track with Media Player P.143 Playing a truck in Music ― * Watching TV /notification of reserved P.124 watching Recording TV*/notification of P.127 reserved recording USB device is connected P.170 Screen mirroring connected P.159 Mobile data communication invalid P.
Notification panel When notification icons appear on the status bar, you can open the Notification panel to check the notifications, activate corresponding application, etc. 1 ・ You can also swipe (or flick) down on the lock screen to see notifications (You do not need to operate the terminal to see new notifications or a part of notifications that have arrived after the screen is locked). You can set to hide notifications on the lock screen (P.167) or to show them all the time (P.167).
d User ・ Add or switch users or guests who use the terminal, or delete guests. ・ Tap [MORE SETTINGS] to display "Users" in the Settings menu (P.178). e Quick settings Brightness level Adjust the screen brightness. Wi-Fi Enable/disable Wi-Fi function. ・ Tap to scan for available Wi-Fi networks and get connected. Bluetooth Enable/disable Bluetooth function. ・ Tap to scan for Bluetooth devices paired with the terminal and get connected. NFC Enable/disable NFC Reader/Writer, P2P function.
Xperia™ Home screen This section describes the Home screen displayed when the home application is set to "Xperia™ Home". a b c d e f g h g "ひつじのしつじくん® (Butler Sheep)" i ©NTT DOCOMO a b c d e f g h i Widget : Google Search Widget : Clock Machi-chara Widget : Introduction to Xperia™ Current page ・ Display the number of home screens and current home screen position. Flick the Home screen left or right to switch the pages. ・ When "Google Now™" (P.56) is set to ON, the leftmost is Google Now screen.
Adding a widget to the Home screen 3 Widget is an application which can be added to the Home screen to use. Use a widget to start an application easily. 1 2 Touch and hold an area of the Home screen where no icons are displayed. [Widgets]u Select the widget you want to add. ・ If a settings screen etc. appears, follow the onscreen instructions. ❖Information ・ To return to the Home screen, tap h , or tap any home screen.
Changing wallpaper Changing theme You can change wallpaper of the Home screen. You can change themes for the Home screen, wallpaper of the lock screen, etc. 1 Touch and hold an area of the Home screen where no icons are displayed. 1 Touch and hold an area of the Home screen where no icons are displayed. 2 3 [Wallpapers]. 2 [Themes]. 3 Select your desired themeu [APPLY THEME]u [OK]. Tap [Album]/[Live Wallpapers]/ [Photos]/your desired image.
Icon appearance Change the design of the icons Show names in Set whether to display the names dock of shortcuts and other items arranged on the dock at the bottom of the Home screen (on either side of Apps button). Automatically Set whether to automatically place icons arrange shortcuts, etc. that are on together the Home screen so that there are no gaps. Pane transition Set the type of transition that occurs when you switch between panes of the Home screen.
Media Music Album Video TV YouTube Camera docomo mail Messaging Dial Apps* Speed dial P.63 P.141 P.62 P.122 P.65 P.128 P.102 P.102 P.61 ― P.57 * Applications such as "Anshin Scan", "docomo backup", etc. appear. ❖Information ・ To change to the standard Home screen, from the Simple Home screen, tap [Settings]u [Exit Simple Home]u [OK]u [docomo LIVE UX]/[Xperia™ Home]. Using speed dials Save frequently used contacts to "Speed dial" to easily make a call or send a message.
Using Settings 1 Sound On the Simple Home screen, [Settings]. My profile Display Wallpaper Themes Brightness Auto-rotate screen Font size Sleep Screen lock Check your own phone number and mail address, etc. Set the wallpaper for the Simple Home screen or the lock screen. Set the theme for the wallpaper of Simple Home screen or the lock screen, or download themes. Adjust the screen brightness. Set whether to switch portrait/landscape view automatically according to the terminal orientation.
❖Information Xperia™ Application screen ・ To delete applications saved in the "My Apps" folder, in Step 2, unmark applications to deleteu Tap [DONE]. Changing applications on the Simple Home screen This section describes the application screen displayed when the home application is set to "Xperia™ Home". ・ Switching Home application (P.68) 1 On the Simple Home screen, [Settings]u [Customize Home]. 2 3 [Change apps]/[Reorder apps].
c Current displayed position ・ Display the number of pages and current screen position. Flick the application screen left or right to switch sheets. ・ The leftmost sheet is the application search screen. d Option menu ・ This menu allows you to rearrange application icons and manage applications (for example, by moving or uninstalling) and to set the Home screen (P.55). e Machi-chara Application list Applications displayed on the application screen are as follows.
しゃべってコンシェル (Shabette concier)*1 Just speak to your "concierge", and he or she will understand what you want to do. You can easily check the weather or transfer information, make phone calls, set an alarm, or perform other tasks. You can also enjoy chatting with various characters. Schedule*4 An application for creating/managing schedule whose data is shared with Memo application. It supports i-concier service. → P.
docomo backup An application for backing up to/restoring from your " データ保管 BOX (Data Storage BOX)" or "microSD card". → P.150 "docomo backup" will be changed to "docomo Data Copy" of the name, functions, etc. depending on the application version. For details of "docomo Data Copy", refer to NTT DOCOMO website. docomo mail*4 Send/receive mails using DOCOMO mail address (@docomo.ne.jp).
Maps*3 Use Google Maps services, such as viewing current location, finding another location and calculating routes. → P.146 マネレコ (Manereko)*1 A banking app that allows you to check the balance of your bank account, details of your credit card, etc. Music Play music files stored on your internal storage or microSD card. Messaging Send and receive messages (SMS). → P.102 Media Player*1 Play music and videos. → P.143 Memo*4 An application for creating/managing memos whose data is shared with Memo application.
Google*3 Search information in the terminal and web pages by keywords. → P.68 iコンシェル (i-concier)*1 i-concier is a service that turns your smartphone into your "butler" or "concierge" to help you in your daily life. It provides you with timely and useful information that fits your schedule, local area, and current location. For example, you can obtain information about rain forecasts (with alarms), train timetables, and tourist spots.
Twitter Official Twitter client application. Post a short message on the website and communicate with someone else. What's New*5 Find the latest news about music, videos, and other media and check for application updates. Xperia™ Lounge Japan*5 An application that provides information about products and campaigns from Sony Mobile Communications, Inc. YouTube*3 Play YouTube videos. *1 Stored in the " ドコモのおすすめ (DOCOMO's recommendations)" folder. *2 Stored in the " ツール (Tools)" folder.
❖Information ・ When "Add icons to home screen" (P.56) is set to ON, you can add application shortcuts to the Home screen just by touching and holding application icon you want to add in Step 1. ・ When "Icon on home screen" (P.56) is set to ON, previously added shortcut will be deleted automatically if application shortcut added to the Home screen is duplicated.
Rearranging application icons When the order of application icons is set to "Own order" in the option menu (P.60), you can rearrange your application icons as you like. 1 On the application screen, touch and hold an iconu Drag it to any position you like. ❖Information ・ While sorting application icons, drag an icon to the right edge of the application screen to add an application screen. ・ Automatically sort the icons by selecting the order "Most used", "By name", or "By date" in the option menu (P.
Switching Home application You can switch the Home application of the terminal to "docomo LIVE UX", "Xperia™ Home" or "Simple Home". 1 From the Home screen, u [Settings]u [Home]. 2 Tap the radio button of "Simple Home"/"Xperia™ Home"/"docomo LIVE UX"u [OK]. Searching information in the terminal and web pages Enter a word in the search box to browse the information in the terminal or on the Internet. 1 From the Home screen, tap the Google search widget. 2 Enter a search word.
Using Google Voice Search Character entry Enter a search word by voice. 1 From the Home screen, tap the Google Search widget. 2 Speak a search word to the microphone. on ❖Information ・ To hide software keyboard, tap ❖Information ・ Alternatively, from the Home screen, tap Enter characters using the software keyboard which appears when you tap the character input box in a mail, phonebook, etc. u [Voice Search] to activate the "Voice Search" application.
Selecting a keyboard Software keyboard Select a keyboard displayed when you tap a character entry field. 1 From the Home screen, [Settings]. 2 [Language & input]u [Current keyboard]. 3 [SwiftKey Keyboard (SwiftKey Keyboard)]/[Japanese (Xperia™ Japanese keyboard)]. u For Xperia™ Japanese keyboard, the following software keyboard can be used. ・ Character input method (P.71) Keypad QWERTY ❖Information ・ When the language is set to English, the default keyboard is set to "SwiftKey Keyboard".
Keyboard layout Switch to QWERTY/ Switch to keypad One-handed keyboard My Words Settings Set software keyboard (Keypad or QWERTY) for each character mode. Switch to QWERTY/keypad. Change the keyboard size for onehanded operation. P.75 Change Xperia™ Japanese keyboard settings. Keyboard skins Change software keyboard skin. Online help P.69 For beginners Select "Online help" to display "POBox Plus 日本語入力 使い方ガイド (Online help for Xperia™ Japanese keyboard)" (Japanese) (P.69).
a Quick tool bar Display shortcuts of frequently-used functions. Tap to display the tool list (P.70). If the quick tool bar is not displayed, tap (when is not displayed, tap / to switch the character mode to "Kana"). h Enter spaces. In Kana mode, highlight and select word in the candidate list. i Enter a line feed. b * Show/hide the quick tool bar. When entering on the keypad, characters assigned to a key appear in reverse order.
- When entering 2 or more characters and tapping the icon at the upper left, appears. Tap to combine entered 2 characters to 1 character. Combine characters with this operation if 1 Kanji character is recognized as 2 characters or other. Flick input Flick up/down/left/right to enter characters in each column of kana syllabary. Entering characters in " な" column You can enter " な " only by tapping. Flick left for " に ", up for " ぬ ", right for " ね " and down for " の ".
Editing text In the character entry screen, when you double-tap a character you want to edit, or touch and hold or double-tap a text you want to copy in a web page etc., an edit menu appears near the selected text. Drag or to change the character string to select. CUT COPY PASTE SHARE SELECT ALL WEB SEARCH Cut a selected character string. Copy a selected character string. Paste a copied/cut character string. Attach and send the selected character string to an application. Select all text.
My Words You can add words to My Words beforehand to have them appear as preferred candidates when entering characters. 1 From the character entry screen, tap in the quick tool bar. ・ 2 3 4 5 6 Setting character entry For each input method, you can make settings related to character entry or check application information. 1 From the Home screen, u [Settings]u [Language & input]. 2 Tap [SwiftKey Keyboard]/[Xperia™ Japanese keyboard]/[Google voice typing]/[Moji-Henshu].
docomo LIVE UX Home screen Home screen is displayed when h is tapped. You can activate applications, widgets, etc. or display the applications screen from it. ・ Flick the Home screen left or right to switch the pages. a b c d e a b c d e f g h i Managing the Home screen Adding/Moving applications etc. to the Home screen Move application icons or add widgets or folders to the Home screen. 1 Touch and hold an area of the Home screen where no icons are displayed.
Moving an icon on the Home screen 1 2 From the Home screen, touch and hold an icon you want to move. Drag it anywhere. ・ To move to the next home screen, touch and hold the home screen and drag it to left or right. 1 From the Home screen, touch and hold an icon you want to uninstall. 2 Drag to "Uninstall" displayed in the top of the screenu [OK].
Changing wallpaper 3 You can change wallpaper of the displayed home screen. ・ Display a home screen page you want to change in advance. 1 Touch and hold an area of the Home screen where no icons are displayed. 2 3 [Change wallpaper]. Tap a wallpaper you want to change. ・ 4 Tap [See more wallpapers] to select from "Images", "Photos", "Live Wallpapers", or "Xperia™". Follow the onscreen instructions to set wallpaper.
❖Information Application screen 1 ・ To close the application screen, tap b From the Home screen, tap ・ . Flick the Home screen downwards to display the application screen. a d e b f or h , or flick up the Home screen display area at the bottom of the screen. Customizing the application screen Moving/Adding an application or widget to the Home screen 1 On the application screen, touch and hold an icon you want to move/add to the Home screen.
Uninstalling an application or widget Some application icons and widgets can be uninstalled from the application screen. ・ Before uninstalling, see "Uninstalling an application or widget from the Home screen" (P.77). 1 On the application screen, touch and hold an icon of application you want to uninstall. 2 Drag to "Uninstall" displayed in the top of the screenu [OK]. Installing "Recommends" applications Install applications recommended by DOCOMO. 1 On the application screen, [Recommends].
Display all apps It is a function to search where an application is located. 1 From the Home screen, u u [Display all apps]. ・ 2 1 On the Home screen, u u [Layout backup & Restore]. u 2 [BACKUP]. All applications are displayed in a list. Tap an application. ・ Backing up the Home screen The screen such as the Home screen, application list, or the folder where the tapped application icon is located appears. The application icon is selected in the screen.
Backup settings 1 On the Home screen, u u [Layout backup & Restore]. 2 Tap Backup automatically . Set whether to periodically back up when the home screen information for the docomo LIVE UX is updated. Multi-Device Set whether to send a notification Sync to your other devices when an application has been installed. Sync on Wi-Fi Set whether to back up or sync only data only when the terminal is connected via Wi-Fi. Sync while Set whether to back up or sync Roaming data during international roaming.
Setting a category 1 From the Home screen, u u [Display category setting]. 2 Mark the category you want to display. Changing My Magazine use setting 1 2 From the Home screen, u u [My Magazine settings] u [My Magazine use setting]. [Use]/[Not use]u [OK]. ❖Information ・ You can also set by tapping on the application screenu [My Magazine use setting]. Checking Home application information 1 On the application screen, u [About].
・ With VoLTE (HD+), you can make voice and video Phone Making/Receiving a call Making a call/video call 1 From the Home screen, tab. 2 Enter a phone numberu Tap 3 When the call is finished, tap u "Dial" ・ . To make a video call, enter a phone numberu u Tap [Video call]. ・ Tap to delete the number. . ❖Information ・ In Step 2, tap without entering a phone number to enter the phone number registered as the latest call in Recent calls.
・ When calling 110, 119 or 118 for emergency from the Emergency call Emergency call Police call Fire and emergency rescue Coast guard Phone number 110 119 118 ❖Note ・ This terminal supports "Emergency call location information". If you use the terminal to place a call to emergency numbers such as 110, 119, or 118, the information of a location where you are calling from (location information) is automatically notified to the Emergency call acceptance organization such as the Police Station.
■ Using 2-second pause (,) Added number will automatically be sent approximately 2 seconds after a call is accepted. 1 2 3 ■ From the Home screen, u "Dial" tab. Enter a phone numberu u [Add 2–sec pause]u Enter an additional numberu Tap . When the call is finished, tap . For details on the WORLD CALL, refer to NTT DOCOMO website. ・ Send replacing "+" by an international access code. 1 From the Home screen, tab.
Answering a video call with the camera turned off Receiving a phone/video call ・ When a phone or video call comes in, the incoming call screen appears. If the backlight is on (except on the lock screen) or an application is running, a notification appears at the top of the screen (P.88). 1 On the incoming call screen, drag (left) to (right). ・ 2 To accept a video call, drag (left) to (right) for "Answer video". To answer a call with voice only, drag (left) to (right) for "Answer voice".
Muting the ringtone for an incoming call 1 While receiving a call, press the volume key or O . ❖Information ・ You can stop vibration by pressing the volume key or O when silent mode (Vibrate) is set. ・ On the Home screen etc., press the volume key to adjust the ringtone volume. Declining a call 1 On the incoming call screen, drag (right) to (left).
Operations during a call On the Calling screen, you can set speakerphone or mute, or enter a phone number to make a call to another party. ■ Screen displayed during a voice call a b c d a Name, phone number, etc.
k More (voice call) ・ Hold call [More]u Tap [Hold call]/[Resume call] to put a l m n o p voice call on hold or resume the call. ・ To hold a call, "Call waiting" subscription is required (P.93). ・ Add call [More]u Tap [Add call] to add a voice call. ・ To add a call, "Call waiting" subscription is required (P.93). ・ "Add call" is displayed during a 3G voice call. Switch camera ・ Tap this icon to switch between cameras for shooting your image.
History ・ The details of an incoming or outgoing calls (Outgoing, Incoming, or Missed call) are displayed. i Call history Incoming calls and outgoing calls are displayed by chronological order in the Recent calls screen. ■ From the Home screen, "Recent calls" tab. u Tap Recent calls screen Adding a number from the Recent calls to Phonebook 1 a b c d ・ The number of call history that can be stored depends on the amount of available memory on your terminal.
Deleting a call history Answering Machine 1 From the Home screen, u "Recent calls" tabu Touch and hold an incoming/outgoing history you want to delete. 2 [Delete from call log]u [OK]. ❖Information ・ To delete all the call history, in the Recent calls u [Delete log]u Mark screen, tap the "All" tabu "Select all"u [Delete]u Tap [Delete]. ・ Voice and video calls are not distinguished in the Recent calls. Displaying missed calls When you have missed calls, the status bar.
❖Information ・ If there is a recorded message, is displayed in the status bar. Drag the status bar downwardsu Tap [Answering Machine] to display the [Messages] screen, where you can check the recorded message. ・ To delete recorded message, touch and hold a messageu Tap [Delete]/[Delete all]u [OK]. ・ The number of messages that can be stored depends on the amount of available memory on your terminal. Call settings You can set the network services, set call rejection, or edit Reject call with message.
Network Caller ID service display request service Call notification Answer calls without phone number with guidance to request caller ID display. Notify incoming calls by message (SMS) while the power is off or you are out of service area. English Switch the voice guidance guidance to English or Japanese. Remote Set to operate Voice Mail operation Service or Call forwarding settings Service using land-line phone, public phone or DOCOMO mobile phone, etc.
Suguden setting Make settings for "Suguden" that allows you to operate phone with motions. 1 From the Home screen, . 2 [Call settings]u [Suguden setting]. Answer u Tap Set whether to answer calls by holding up the terminal to ear. Disconnect Set whether to disconnect calls by placing the terminal horizontally with the screen faced down during a call, or shaking the terminal twice.
・ When "Disconnect" is set to "ON", performing the call disconnect motion will end the call even in the following situations. - When the other party puts the call on hold - While Answering Machine is active (playing back a greeting, recording a message) ・ When "Disconnect" is set to "ON", a call may be disconnected if you shake the terminal strongly even just once during the call because that is recognized as motion performance.
Phonebook ■ Phonebook list screen On the phonebook list screen, you can view details of your contacts. You can add a photo or image to a phonebook entry, and display phonebook entries by group. On the phonebook, you can enter various information for contacts, for example, phone numbers, mail addresses and various service accounts. a d Displaying phonebook 1 The phonebook list screen appears. ❖Information ・ To use cloud service for the phonebook, "docomo ・ ・ ・ ・ phonebook" application is needed.
k Index ・ Display the index character to search entries in the order of Japanese syllabary, alphabet, etc. Managing phonebook Making a call/video call from the phonebook 1 From the Home screen, [ ドコモクラ ウド (docomo cloud)]u [docomo phonebook]u Tap "Contacts" tabu Select a phonebook entry you want to make a call to. 2 On the profile screen, tap a phone number. 3 [Call]/[Video call].
Registering a phonebook entry to Favorites 1 From the Home screen, [ ドコモクラ ウド (docomo cloud)]u [docomo phonebook]u Tap "Contacts" tabu Select a phonebook entry to add to Favorites. 2 On the profile screen, tap . ❖Information ・ To display phonebook entries added to Favorites, on the phonebook list screen, tap "Group" tabu [Favorites]. Using optional menu 1 From the Home screen, [ ドコモクラ ウド (docomo cloud)]u [docomo phonebook]u Tap "Contacts" tab/ "My profile" tab.
■ Profile screen Share Delete Set ringtone Join/Separate ■ ❖Information Send a displayed phonebook entry with Bluetooth function, Email, etc. Delete a displayed phonebook entry. Set a ringtone for displayed phonebook entry. Join/separate displayed phonebook entry. My profile screen Send My profile Share When you change your mail address etc., send the change to mail addresses that are registered to the docomo phonebook all at once.
Checking My profile and editing information 1 From the Home screen, [ ドコモクラ ウド (docomo cloud)]u [docomo phonebook]u Tap "My profile" tab u [Edit]. 2 On the My profile screen, enter necessary information such as name. 3 [Save]. Importing/Exporting/Sharing phonebook entries Phonebook entries can be imported from a microSD card or docomo nano UIM card, or exported to a microSD card. This is useful, for example, when you want to move the contact information to another phone.
Mail/Web browser docomo mail Message (SMS) Send/receive mails using DOCOMO mail address (@docomo.ne.jp). Data can be easily transferred when changing models or restored when you have lost the terminal since sent and received mails are saved on the docomo mail server. Also, your d ACCOUNT allows you to use the same email address to send, receive, and view email on several devices, such as tablets and computers. For details of docomo mail, refer to NTT DOCOMO website. https://www.nttdocomo.co.
・ 5 When the number of entered characters comes close to a limit, a number of enterable characters appears on the right of the text box. Tap (Send). ❖Information ・ You can change default messaging application to Hangouts. From the Home screen, u [Settings]u [Apps]u u [Default Apps]u [SMS app]u [Hangouts]. ・ You can also send/receive text messages to/from customers of overseas network operators.
Deleting a message (SMS) 1 From the Home screen, u [Messaging]. 2 Select a sender/recipient whose messages (SMS) to delete. 3 Touch and hold a message (SMS) to delete. 4 [Delete message]u [DELETE]. ❖Information ・ To delete several messages (SMS), in Step 3, u [Delete messages]u Mark messages (SMS) you want u [DELETE]. to deleteu Deleting messages (SMS) by sender/recipient 1 From the Home screen, u [Messaging]. 2 Touch and hold a sender/recipient you want to delete. 3 u [DELETE].
* With silent mode (Mute) turned on, the terminal does not vibrate when receiving messages (SMS). 4 ・ Email You can create a POP3 or IMAP compatible email account provided by general ISP (provider), or an Exchange ActiveSync account to send or receive email. You can set multiple Email accounts. Making initial setting for Email Set an Email account following the onscreen instructions. 1 From the Home screen, u [Email]. ・ 2 3 Follow the onscreen instructions to configure necessary settingu [NEXT].
Creating and sending email 1 From the Home screen, u [Email]. 2 3 Tap 1 Enter the email address of recipient. When you enter a name or email address in the email address field, contacts matched to the entered numbers or letters are listed. ・ To enter multiple email addresses in characters directly, separate with a comma (,) or a space input and then enter the next email address. ・ To add Cc or Bcc recipients, u Mark "Show Cc"/"Show Bcc". Enter a subject and message. Tap (Send).
Saving attachment file of email 1 From the Home screen, u [Email]. 2 Tap an email with attached files. 3 ・ When attached file is not loaded, tap [LOAD]. Tap [SAVE] of file you want to save u Select a saving destinationu [SAVE]. Replying/Forwarding email 1 2 From the Home screen, u [Email]. Tap an email to reply or forwardu Tap any of [REPLY]/[REPLY ALL]/ [FORWARD]. ・ 3 4 Deleting email 1 From the Home screen, u [Email]. 2 3 Tap an email to delete. Tap .
Changing Email account settings Setting up an email account that supports IMAP 1 2 3 From the Home screen, u [Email]. u [Settings]. Tap an Email account you want to change the settings for. Notification Configure Status bar notification, Notification sound, Vibrate*, and Notification light settings. Sync Check Set how often the Email settings frequency application checks for new emails. Days to sync Set a period of emails for sync.
・ You can change the settings for the "Email" application with the setting items displayed below the account in Step 3. Gmail You can use the email services provided by Google or by major Internet service providers (ISPs). ・ Set up your Google account (P.181) or email account by following the onscreen instructions, if you have not already done so. ・ If you do not synchronize Gmail after Google account is set, "Account not synced" screen appears. Follow the onscreen instructions.
Early Warning "Area Mail" Area Mail is a service which allows you to receive earthquake early warning or tsunami warning delivered by the Meteorological Agency, and disaster/evacuation information delivered by the national government or local governments without being influenced by congestion. ・ Area Mail is a free service for which subscription is not required. ・ Area Mail cannot be received in the following case.
Viewing received Area Mail later 1 2 3 From the Home screen, u [Disaster kit]. [Early Warning "Area Mail"]. Select an Area Mail from the Area Mail list. ❖Information ・ Up to 50 messages can be saved. If savable amount of Area Mail exceeds the limit of maximum, the oldest one is deleted in order. Deleting Area Mail 1 2 3 From the Home screen, u [Disaster kit]. [Early Warning "Area Mail"]. Mark Area Mail you want to delete u [Delete]u [OK].
❖Information Chrome Use "Chrome" application to view web pages like on a PC. You can use "Chrome" application via packet communication and Wi-Fi network with the terminal. Displaying web pages 1 2 From the Home screen, tap When address entry field is not displayed, flick down the screen to display. Enter a web page address or keyword to search. ・ Tap for address entry field to enter search words in voice sound. ・ As you enter an address or characters, retrieved web pages list appears.
Changing tabs Changing Chrome settings 1 Tap 2 Tap a tab you want to display. ・ . Currently opened tabs are displayed with thumbnails in a list. ❖Information ・ A number in the icon explained in Step 1 varies by You can make settings for search engine, privacy, etc. 1 From the Home screen, u u [Settings]. 2 Select an item to change to set. the number of tabs that are opened. Operating links Closing a tab 1 Tap close.
Opening a bookmark 1 From the Home screen, u u [Bookmarks]. 2 Tap the bookmark you want to open. ❖Information ・ You can edit, delete, etc. a bookmark in the bookmark list by tapping holding a bookmark. or touching and Checking history 1 From the Home screen, u u [History]. 2 Tap a history to check. ❖Information ・ To delete history, tap of history. ・ To delete all history, [CLEAR BROWSING DATA...
Apps d メニュー (dmenu) In dmenu, you can easily access sites recommended by DOCOMO or convenient applications. 1 From the Home screen, [d メニュー (dmenu)]. ・ Browser is activated, "dメニュー (dmenu)" appears. ❖Information ・ To use dmenu, Internet connection by packet communication (LTE/3G/GPRS) or Wi-Fi is required. dmarket dmarket provides a variety of services, offering digital content, such as music, videos, and books, and giving you access to a shopping site, travel booking site, and other sites.
Play Store With Google Play, you can directly access useful applications or fun games and you can download and install them on the terminal. ・ To use Google Play, you need to set a Google account (P.181). ・ For details on how to purchase applications, return your purchases, or request a refund, from the Home screen, tap [Play Store]u u [Help & Feedback] to see Google Play Help. ・ NTT DOCOMO is not liable for malfunctions, if any, caused by the application you installed.
Osaifu-Keitai This function allows you to use " おサイフケー タイ対応サービス (Osaifu-Keitai compatible service)" by which you can pay money or use coupon, etc. or " かざしてリンク対応サービス (Kazashite-Link compatible service)" by which you can access information by holding the terminal over a home electric appliances or smart poster. You can save electronic money and points to an IC card of the terminal and a docomo nano UIM card to check the balance or points on the screen.
Notes on holding over the device Please note the following when holding the terminal over an IC card reader or NFC module equipped device. ・ Bring the NFC / Osaifu-Keitai position close to the device slowly without hitting it strongly. ・ Hold the NFC / Osaifu-Keitai position over the center of the device and parallel to it. If scanning fails even with it held in front of the center of the scanner, slightly lift up the terminal, or move it backwards/forwards or to the left/right.
❖Information ・ You can scan and write data to or from an IC card ・ ・ ・ ・ reader without activating Osaifu-Keitai compatible application. These services are available even when the terminal is off. However, they may not be available if the terminal has been off for a long time or the battery is too low.
3 Enter a passwordu [NEXT]. ・ When using "NFC / Osaifu-Keitai lock" for the first time, enter a password to set. ・ Osaifu-Keitai function is locked, and or is displayed in the status bar. ❖Information ・ Note that you cannot cancel "NFC / Osaifu-Keitai lock", if the battery runs out while "NFC / Osaifu-Keitai lock" is set. Be careful about remaining battery level. If you cancel "NFC / Osaifu-Keitai lock", charge the terminal before canceling.
iD アプリ (iD application) "iD" refers to electronic money offered by docomo. Once you have set up "iD" on your Osaifu-Keitai, you can hover the terminal over an IC card reader at various shops to make your shopping easier and more comfortable. You can register the information of up to two cards, and use either one depending on the privilege. ・ To use iD with your Osaifu-Keitai, you need to configure settings using the iD application.
TV TV is an application with which you can switch between Full seg and 1Seg and watch according to the air wave reception condition. In addition, since the data broadcasting can be received with images and sounds, interactive service using communication function of mobile devices and receiving detailed information are available. With Full seg, you can watch a terrestrial digital TV broadcasting service in high-vision quality.
Also, even in a terrestrial digital TV broadcasting service area, reception condition may be poor or reception may be unavailable in the following places: ・ A place far from the tower that the airwaves are sent from ・ Mountain-ringed regions or a place between buildings where airwaves are interrupted by geography or buildings ・ Tunnel, underground or far back from a building where airwaves are weak or do not reach Changing the direction of the TV antenna cable or moving to another location may improve signa
Watching TV 1 ■ From the Home screen, ・ u [TV]. When using for the first time, make channel settings according to the onscreen instructions (P.126). TV watching screen ab c d i Reception signal level j Record icon k Channel selection key ・ Touch and hold / to search available channels. l Data broadcasting ・ For 1Seg programs, data broadcasting can be viewed only in the portrait screen.
・ Answering an incoming call while watching TV Setting TV temporarily pauses the program. The program resumes automatically after the call ends. ・ To watch data broadcasting, call charge or packet communication charge is not required. If you use additional services of data broadcasting, etc. via packet communication, packet communication charge is applied. You can set TV watching screen, data broadcasting and channel settings.
Subtitle/Sound/Video Turn subtitles on or off, set setting their position, or select the main or sub audio channel.* 2 Settings Superimpose Set whether to display setting superimpose for Full seg or select a superimpose language. Data Set whether to use the Broadcasting location information or the terminal information, clear settings the broadcasting station memory, or postal code. Auto Exit Make a timer setting to end Timer TV watching. Device ID of Display device ID of receiver.
3 4 5 Tap a broadcasting station to change the remote control numberu Touch and hold an image. Touch and hold a number of remote control you want to set to. [YES]. ・ If you select a number of remote control which is already assigned to another broadcasting station, [Overwrite registered channel]u Tap [YES]. ❖Information ・ To delete set broadcasting stations, touch and hold a broadcasting station to delete in Step 3u [Delete channel]u Tap [YES].
Playing a recorded program 1 2 3 From the Home screen, u [TV]. u [Recorded program list]. Tap a program you want to play. ❖Information ・ To delete a recorded program, touch and hold the u Tap program you want to delete in Step 3u [YES]. ・ To change the title of a program, touch and hold the u Enter program you want to rename in Step 3u u a title Tap [OK]. ・ Tap in Step 3 to set the playback mode and see and sort the amount of available memory.
Activating the camera 1 Shooting screen From the Home screen, [Camera]. ・ a A shooting screen appears. ・ When the camera is turned on via Quick launch, the Using Quick launch "Quick launch" refers to turning on the for at camera by pressing and holding k least 1 second or by swiping (or flicking) on the lock screen. ・ Quick launch operations can be changed (P.140). c d e ❖Information capturing mode is automatically set to "SUPERIOR AUTO" or "VIDEO".
❖Information ■ ・ When using "AR effect" and other camera Capturing modes and resolution/ Video resolution applications, the display and operations are different. ・ To zoom in or out, set "Use Volume key as" (P.137) to "Zoom" and operate with the volume key, or pinch in or out on the screen. ・ Zooming is not available when apps such as "AR effect" and "Sweep Panorama" are set or when shooting with the front camera.
❖Information ・ To download camera apps, from the Home screen, [Camera]u Swipe (or flick) the screen to display the CAMERA APPS listu Tap [+ Add]. ・ Applications downloaded via "AR effect", "+ Add", and so on will be saved on your internal storage. ・ Some applications may not be able to play back sound from images taken using the "Sound Photo" feature.
■ Shooting still pictures ■ Shooting with the shutter icon 1 2 From the Home screen, [Camera]. Swipe (or flick) the screen to display "SUPERIOR AUTO" or "MANUAL" shooting screen. ・ 3 ■ If using camera apps, select the desired app from the CAMERA APPS list. Tap the shutter icon ( 1 2 Set "Touch capture" (P.137) to "On". 1 2 From the Home screen, [Camera]. 3 Tap the shooting screen. 3 ■ ・ You can also use "Touch capture" when "Sweep Panorama" or "Sound Photo" is set.
3 Switch to the front camera and then turn your palm toward the camera. ・ ・ Tap to set self-timer. When a palm mark appears, a photo is taken. Recording videos ■ Shooting with the start/stop icon 1 2 ❖Information ・ ・ When the auto focus frame does not appear, focusing may be failed. ・ When a face of subject is detected, an auto focus frame is displayed at the position of the face (up to 5 frames).
■ Shooting with the camera key 1 2 From the Home screen, [Camera]. 3 Press k Swipe (or flick) the screen to display "VIDEO" shooting screen. ・ Press k . again to stop recording. ❖Information ・ Do not cover the microphone with fingers etc. when recording videos. ・ When you connect a commercially available ・ ・ ・ ・ earphone or Bluetooth device, shooting start/stop sound may be softer than usual. When shooting video, you can tap the shutter icon ( ) to take a photo.
■ Color and brightness ■ Select a shooting scene. Suitable shooting condition for the selected scene is set. ・ This setting can only be used with the video resolution is "Full HD (30 fps)". ・ When Scene selection is set to other than "Auto", "Object tracking" cannot be set. Auto Off Soft snap Landscape Night scene Beach Snow Sports Party Adjust brightness and color. Drag a pointer of the bar displayed on the shooting screen to adjust.
■ Metering (only when "MANUAL" is set) Measure the brightness on the shooting screen to determine a well-balanced exposure automatically. Face Detects faces, measures the brightness, and adjusts exposure to set the appropriate brightness level. Multi Divides the screen into multiple areas, measures the brightness, and adjusts exposure so that the overall brightness is balanced. Center Put emphasis at the center of the shooting screen and measure photometry at whole view finder to adjust the exposure.
■ SteadyShot™ (only when "4K video", "VIDEO" is set) Set whether to decrease blur by hand shake when shooting. Intelligent active (only when "VIDEO" is set) Reduce camera shake blurring when zooming, or when shooting while walking. Standard Reduce camera shake blurring when shooting normally. ■ Soft skin effect (only for shooting with Front camera) Set whether to shoot a picture making human skin look smoother. ■ ■ Set whether to shoot by tapping the shooting screen.
■ Preview ■ Set the time duration for displaying a preview right after shooting a still image and whether to display the editing screen. ■ Aspect ratio (only when "Style portrait" is set) Set the aspect ratio for photos when shooting with the back camera. ■ Double-tap back cover to take photo (only when "Style portrait" is set) Set whether to shoot photos by doubletapping the back cover when using the front camera. ■ Recording file type (only when "4K video" is set) Select the file type from "H.
■ White balance (When "MANUAL", "4K video" or "Timeshift video" is set) ■ Set according to the ambient light source. u Tap [WB] to set. / AUTO Incandescent Fluorescent Daylight Cloudy ■ ■ [EV]u Tap a bar or drag a pointer to set. Shutter speed (only when "MANUAL" is set) Set a shutter speed according to a moving speed of subject etc. u [SS]u Tap a bar or drag a pointer to set. ■ Focus (only when "MANUAL" is set) Set according to a distance from a subject.
■ Magic beam (only when "Style portrait" is set) Set an effect for pupils of person when shooting with Style portrait. Tap (Off) and select a pattern. To turn off this feature, tap (On) and then tap (None). ■ Aspect ratio (only when "Style portrait" is set) Set the aspect ratio for still pictures. 16:9 4:3 1:1 ❖Information ・ Some settings cannot be used in combination with Changing the Quick launch settings You can change how the camera works when it is turned on via Quick launch.
❖Information Album ・ Depending on the number of saved images, it may take some times to load images. View/play photos or videos. ・ To zoom in/out an image, flick the image list screen right/left or pinch out/in. Displaying photos/videos 1 ■ From the Home screen, [Album]. ・ A list of images are displayed in chronological order. Image list screen a c d ・ For some DRM protected contents or transfer applications, sharing may be limited.
■ Photo viewing screen Playing a video a 1 From the Home screen, [Album]u Tap a video. ・ 2 b c d e f g ■ A preview screen appears. Tap ・ . Tap the screen to display information such as shooting date, option menu icons, etc. Video playback screen a Return to the image list ・ Alternatively, on the photo viewing screen, flick b c d e f g up/down to return to the image list screen. Shot date ・ When a location information is saved, its relevant country or place name is displayed.
■ ❖Information Music playback screen ・ To zoom in/out a video display, pinch out/in on the a video playing screen. ・ Different menu may be displayed or the operation is not available depending on selected video file. b g c d Media Player Play back music and videos stored on the internal storage or a microSD card using Media Player. ・ File formats of playable data (P.
❖Information ・ You can return to the Home screen to perform another operation while listening to music in the background. To return to the music playback screen, from the Home screen, tap u [Media Player], or drag the status bar downwardsu Tap the name of song that is being played. ■ screen. h Volume control ・ Alternatively, on the playback screen, press the volume key to adjust the volume. ❖Information ・ Tap the screen to display option menu icons and Video playback screen other items.
Location services Your current location can be positioned using GPS, Wi-Fi, or mobile network. GPS function The terminal has a GPS receiver that uses satellite signals to calculate your location. Some GPS features use the Internet. Data rates and charges may apply. When you use GPS function to find your location, make sure you have a clear view of the sky. If GPS does not find your location after several minutes, move to another location.
■ Where radio waves are difficult to receive Note that radio waves may not be received or it may be difficult to receive radio waves in the following conditions, since GPS uses radio waves from a satellite.
Finding the current location on the map 3 You can detect your current location using location information service. ・ To detect current location, enable "Location" (P.146) beforehand. Searching for a location 1 From the Home screen, [Google] u [Maps]. ・ 2 When a message appears, follow the onscreen instructions. Tap ・ ・ . Current location is shown by blue mark. If you tap , the icon changes to , and then the terminal's geomagnetic compass links the direction displayed on the map.
Schedule Displaying schedule 1 2 From the Home screen, [ ドコモクラ ウド (docomo cloud)]u [Schedule]. [Switch disp]u Tap [Monthly]/ [Week]/[Daily time-line]/[Daily]. ・ ・ To move the cursor to the current date, in Step 2, tap [Jump to]u [TODAY]. To move the cursor to the date you want to display, in Step 2, [Jump to]u Flick the calendar left or right to select month and then tap a dayu Tap [JUMP]. ・ In Step 2, [Switch disp]u Tap [Memo list] to switch to the "Memo" application screen.
❖Information ・ [Free word search] in Step 3u Enter a search wordu Tap [OK] to search the input information in "title", "text" and "Where?". Stopping alarm 1 While alarm is sounding, drag to the right. ❖Information Clock Use alarm, world clock, stop watch and timer. Setting an alarm 1 2 3 From the Home screen, u [Clock]. u Set time etc. [SAVE]. ❖Information ・ To delete alarms, in Step 2, tap u [Delete alarms] u Mark alarms you want to deleteu [DELETE]*u [YES].
Using Timer 1 From the Home screen, u [Clock]u " " tab. 2 3 [SET TIME]. 4 5 Drag the number up or down to set timeu [OK]. [START]. [STOP]. docomo backup With docomo backup, you can back up or restore data to/from " データ保管 BOX (Data Storage BOX)" or "microSD card". "docomo backup" will be changed to "docomo Data Copy" of the name, functions, etc. depending on the application version. For details of "docomo Data Copy", refer to NTT DOCOMO website. ・ Do not remove microSD card during backup or restoring.
Backing up/Restoring to/from Data Storage BOX Restoring 1 From the Home screen, u [docomo backup]u [Backup/ restore to docomo cloud]. 2 3 [Restore]. You can back up/restore call logs and music data to/from Data Storage BOX. Backing up 1 From the Home screen, u [docomo backup]u [Backup/ restore to docomo cloud]. 2 [Backup]. 3 4 5 ・ When you do not log in to docomo cloud, on the confirmation screen, tap [Log in], then follow the onscreen instructions to log in. Mark the data to back up.
Backing up/Restoring to/from microSD card Back up or restore data such as phonebook entries, docomo mails, images/videos, etc. to an external memory such as microSD card. Backing up When a microSD card is not installed to the terminal, data such as images, movies, etc. are saved to the internal storage. With this application, you can back up only the data such as images or videos saved in the internal storage. Data stored in microSD card cannot be backed up.
Copying phonebook entries registered in Google account to docomo account You can copy contacts data registered in a Google account to a docomo account. 1 From the Home screen, u [docomo backup]u [Backup/ restore to microSD]. 2 3 [Phonebook account copy]. [Select] on Google account contacts you want to copyu [Overwrite]/[Add]. ・ When a message appears, follow the onscreen instructions. ❖Information ・ If phonebook item names (e.g. Phone number, etc.
Settings Viewing the setting menu 1 From the Home screen, [Settings]. Wireless & networks Themes & wallpaper Device Accounts & services System u P.154 P.164 P.164 P.180 P.183 Wireless & networks Airplane mode Wi-Fi Bluetooth Data usage Device connection More Tethering & portable hotspot VPN Mobile networks NFC / Osaifu-Keitai settings P.154 P.155 P.192 P.158 P.159 P.
Wi-Fi 2 Tap ・ . It may take a few seconds before the Wi-Fi connection is on. With Wi-Fi function, you can connect to an access point for your home, company network or public wireless LAN services to use mail and Internet. ❖Information ■ ・ When a Wi-Fi network is disconnected, connection is Reception interference caused by Bluetooth devices Bluetooth devices and wireless LAN (IEEE802.11b/g/n) devices use the same frequency band (2.4GHz).
❖Information ・ Depending on your environment, the connection speed may be slow, or Wi-Fi may not be available. ・ When the terminal is connected to Wi-Fi network successfully, "Connected" appears. When a different message appears, make sure the password (security key). When the connection is not established even if you enter a correct password (security key), the correct IP address may not have been acquired. Check the signal status and reconnect.
Settings Network notification Avoid poor connections Keep Wi-Fi on during sleep Install certificates Wi-Fi Direct WPS Push Button WPS PIN Entry Passpoint MAC address IP address Set whether to notify when Wi-Fi open network is detected. ・ Turn Wi-Fi on beforehand (P.155). Set whether to use LTE/ 3G/GSM network mode when Wi-Fi radio waves are weak or communication quality is bad. Set whether to disable the Wi-Fi function when the screen backlight turns off. ・ By default, "Only when plugged in" is set.
・ Change the setting value for data usage limit and the Data usage Enable/disable mobile data communication or set data usage limit. value for alert by dragging the right end of each bar in the graph. Setting Data usage cycle Enabling/Disabling mobile data communication 1 From the Home screen, u [Settings]u [Data usage]. 1 From the Home screen, u [Settings]u [Data usage]. 2 Tap the set periodu [Change cycle...]. 2 Tap / traffic". 3 Select a monthly reset dateu [SET].
Device connection Screen mirroring* Connect to a TV or tablet compatible with Screen mirroring to display the screen on the terminal. Cast Display the terminal's screen on a device that supports Google Cast. Media server P.198 Keep your device's Set whether to light the screen on terminal backlight while an external device is connected. DUALSHOCK™4 Set to allow a wireless controller (DUALSHOCK™4) to operate the terminal.
Enabling USB tethering 1 Connect the terminal to a PC with USB cable A to C 01 (optional) etc. (P.38). You can use the terminal as a Wi-Fi access point to connect up to 10 wireless LAN devices to the Internet simultaneously. The "Use USB for" screen appears on the terminal. ・ When a screen for installing driver software appears, wait for a while until the installation is complete. ・ When the "Install software" screen appears on the terminal, tap [SKIP] or [CANCEL].
Changing portable Wi-Fi hotspot settings You can change the network name (SSID), security setting, or password set by default. 1 2 3 From the Home screen, u [Settings]u [More]u [Tethering & portable hotspot]. [Portable Wi-Fi hotspot settings]u [Configure Wi-Fi hotspot]. Enter the network name (SSID) of the Wi-Fi access point you want to set. ・ The device name of the terminal is set by default. 4 Tap "Security" setting itemu Tap a security type of the Wi-Fi access point you want to set.
Connecting to a VPN (Virtual Private Network) Use Virtual Private Network (VPN) to connect to the information in a protected local network such as companies, schools or other facilities from outside. ・ To set up a VPN from the terminal, you need to retrieve the information related to security from your network administrator. For details, see the following website. http://www.sonymobile.co.jp/support/ (In Japanese only) Adding a VPN 1 2 3 4 From the Home screen, u [Settings]u [More]u [VPN]. Tap .
Setting an access point An access point for connecting to the Internet (sp-mode) is already registered. You can add or change it if necessary. For details of sp-mode, refer to NTT DOCOMO website. https://www.nttdocomo.co.jp/service/ spmode/ (in Japanese only) For using mopera U and Business mopera Internet, add the access point manually. For details on mopera U, refer to mopera U website. https://www.mopera.
Themes & wallpaper Themes Wallpaper P.55 P.55, P.78 Device Home Display Sound & notification Apps Storage & memory Battery Lock screen & security Users Call Location P.68, P.164 P.164 P.166 P.168 P.169 P.171 P.172 P.178 P.93, P.205 P.179 Home Change the home application for the terminal. ・ If you change the home application, the lock screen, Contacts and player of videos or music are also changed. Simple Home Xperia™ Home docomo LIVE UX P.56 P.53 P.76 Display Brightness level P.
Image enhancement White balance Font size Change font Set the screen to display photos and videos vividly and at high resolution. Note that the image quality of still images can only be enhanced when viewing in the "Album" application. ・ Select "X-Reality for mobile" to enhance patterns and outlines so that sharp images with detailed textures are produced. ・ Select "Super-vivid mode" to enhance colors so that sharp, vivid images are produced. P.165 Set font size. Change font.
❖Information ・ In Step 2, u [Default values]u [DONE] to reset back to the default status. Sound & notification Audio settings DSEE HX Set whether to reproduce sound with the quality equivalent to highresolution audio when playing back compressed music files. This feature works only with headphones that support high-resolution audio. ClearAudio+ The sound setting for music recommended by Sony. It helps optimize the settings for digital signal processing technology with a one-touch operation.
When device is locked Set whether to show notification details on the lock screen.* 1 Keep notification on lock Set whether to keep screen notification details displayed on the lock screen, if you have notifications. App notifications Set notification for each application. Do not disturb Make settings for notifications when Do not disturb function*2 is set to "Priority only", or set the automatic rules.
Force-quitting an application Apps Manage and uninstall installed applications. Also, show memory usage status or change the settings. 1 Managing applications 2 3 1 From the Home screen, u [Settings]u [Apps]. ・ 2 Tap u [Show system] to show all applications. Tap the application you want to manage. UNINSTALL/ DISABLE FORCE STOP Storage Data usage Permissions Notifications Open by default Battery usage Memory P.168, P.169 P.168 Clear data or cache Check data usage amount.
Disabling application You can disable services or applications that cannot be uninstalled. ・ Disabled applications are not displayed on the Home screen or application screen and you cannot execute them, but they are not uninstalled. 1 Tap u [Show system] to show all applications. Tap an application to disable. [DISABLE]u Read the notes and tap [DISABLE APP]. ❖Information ・ When you disabled an application, some other applications linked to the disabled application may not be operated correctly.
2 u [Advanced]u [Storage]. XX.XX GB (Total used of 32.00 GB) Used memory and total memory of the internal storage is displayed. Internal storage*1 Used memory and total memory of the internal storage is displayed. Tap to check each used memory by function or data, etc. *1 SD Card Total memory and used memory of microSD card is displayed. Tap to display the data list for checking saved data. USB drive*1 Total memory and used memory of USB storage is displayed.
Battery SHOW BATTERY The battery level and remaining USAGE standby time (estimate) are displayed. Tap to check remaining battery and applications/functions that use the battery after the previous full-charging. STAMINA mode Restrict the operations and a part of functions of the terminal to save the battery power. ・ Select "Auto start at XX% battery" to set to enable STAMINA mode when the battery level becomes to a specified level. Tap to specify a battery level to enable the function.
Lock screen & security Fingerprint Manager Screen lock Make pattern visible*1 Automatically lock*1 Power button instantly locks*1 Smart Lock Lock screen message Clocks When device is locked Keep notification on lock screen Encrypt device P.175 P.177 Set whether to show pattern when entering pattern. Set time from when the screen backlight turns off to when the screen automatically locks. Set whether pressing O locks the screen immediately.
・ If you forget your security codes, you must bring your official identification (such as driver's license), the terminal, and docomo nano UIM card with you to the nearest docomo Shop. For details, contact the "General Inquiries" on the last page. ・ The PUK code is written on the subscription form (copy for customer) handed at the subscription in the docomo Shop.
■ PIN code You can set up a security code called a PIN code for your docomo nano UIM card. The code is set to "0000" at the time of subscription; however, you can change the code by yourself. PIN code is a 4- to 8-digit security number (code) that must be entered for user confirmation to prevent unauthorized use of docomo nano UIM card by a third party every time you insert the docomo nano UIM card into the terminal or when the terminal is powered on.
Enabling SIM card lock Unlocking PIN lock By entering PIN code when powered on, you can protect from improper use. 1 2 3 1 2 From the Home screen, u [Settings]u [Lock screen & security]u [Set up SIM card lock] u [Lock SIM card]. Enter PIN codeu [OK]. Entering the PIN code when powered on 1 On the PIN code entry screen, enter the PIN code. 2 Tap . Changing the PIN code ・ You can change only when you activate the SIM card lock.
washing your hands, using a different finger for authentication, or registering a larger area of your fingerprint. - Your fingers are: Wrinkled or wet (for example, after you take a bath) - Sweaty or greasy (with hand cream etc.
・ When "Fingerprint setup" screen appears, tap [SET UP SCREEN LOCK] to set unlocking method of the screen lock ("Pattern"/"PIN"/"Password") Use the selected unlock method if fingerprint authentication does not work. ・ When the entry screen for unlocking the screen lock appears, enter the set unlock method and then follow onscreen instructions.
Locking the screen Users Once you specify the screen unlock method (P.177), the screen is locked when you press O to put the terminal into sleep mode or when the backlight turns off automatically. Add users to share the terminal with multiple users (function that allows users and guests to use the terminal). ■ You (Owner) Guest To unlock the screen 1 When the screen is locked, press O to turn the backlight onu Swipe (or flick) up/left on the screenu Enter the unlock PIN, pattern, or password.
❖Information ・ You can add up to 5 users including an owner and users. ・ If the screen unlock method is set to "Pattern", "PIN", or "Password", you cannot add users even when you open the Quick settings panel (P.51) on the lock screen. To add users, tap when using the terminal as its "owner"u Mark the "Add users when device is locked" check box. ・ When using the terminal by the owner, tap for "(User Name)" or for "New user" to set whether to permit use of phone and SMS, or remove the user.
Accounts & services docomo service/cloud Accounts & sync Google Backup & reset P.180 P.181 P.182 P.182 docomo service/cloud d アカウント設定 (d ACCOUNT setting) docomo cloud docomo apps management Osusume hint docomo apps password AUTO-GPS Set up your d ACCOUNT to use docomo applications. You can also use your biological information (fingerprint) registered on the terminal to set up your d ACCOUNT. Make settings for docomo cloud compatible service.
Account & sync Manage (add or delete) online service accounts or synchronize contacts, calendar, etc. saved in online services with the terminal. ・ Auto-sync data (P.182) Setting up a Google account You can set a Google account on your terminal and use Google services such as Gmail, Google Play, etc. You can set multiple Google accounts on the terminal. 1 From the Home screen, u [Settings]u [Account & sync] u [Add account]u [Google]. 2 Follow the onscreen instructions to set up a Google account.
Configuring sync settings for your accounts Backup & reset ■ Back up my data To sync automatically Synchronize information of online service with the terminal. You can display and edit information on the terminal or a PC. ・ Setting Auto-sync data, communication occurs to synchronize and a packet communication charge may be applied. 1 2 ■ From the Home screen, u [Settings]u [Account & sync]. u [Auto-sync data]u [OK].
1 2 From the Home screen, u [Settings]u [Backup & reset]u [Factory data reset]u [RESET PHONE]. [ERASE EVERYTHING]. ❖Information ・ Some pre-installed content can be re-downloaded, even if it is deleted when you reset your terminal. To download, from the Home screen, u [Xperia™ u [ サポート (Support)]u [ スマー Lounge Japan]u トフォン/タブレット関連 (For smartphone/tablet)] u [ ドコモ (DOCOMO)] (in Japanese only) and then select the terminal on the screen.
Xperia™ Tips Set whether to notify you of convenient functions of the terminal with notifications, or check hints displayed previously. *1 Tap [SHOW ME] to display the Xperia™ introduction screen to select items. If a screen for selecting previous mobile phone, select a mobile phone type. *2 The items vary depending on the selected previous mobile phone. To change a mobile phone type, in the Xperia™ introduction screen, u Tap [Select phone].
Setting Text-to-speech output 1 From the Home screen, u [Settings]u [Language & input]u [Text-to-speech output]. Google Textto-speech Engine Speech rate Listen to an example Default language status Set language for text-to speech and audio synthesis engine to read out text. Set speed at reading out text. Playback sample of audio synthesis. Display languages supporting textto-speech.
About phone Software Update Status Legal information Certificates Usage info settings Model number Android™ version Android security patch level Baseband version Kernel version Build number P.220 Check own phone number, battery status, remaining battery, battery performance, etc. Check open source license or Google terms of use, etc. P.229 Set whether to send usage information for the terminal. Check versions, numbers, etc.
File management Storage structure Phone (Internal storage) Folders in the internal storage (/storage/ emulated/0) by default are as follows. ・ Displayed folders may differ depending on the terminal operations. Alarms Android DCIM DeviceConfig Download Movies Music Notifications Pictures Podcasts recovery Ringtones Stores alarm sounds etc. Stores setting data for system or each application, temporary files, etc. Stores still pictures/videos shot by Camera. Used by SONY configuration tool.
Inserting microSD card ・ 4 Opening/closing the cover of docomo nano UIM card/microSD card slot (P.26). 1 Draw the cover of docomo nano UIM card/microSD card slot out (P.26). 2 Draw the tray out straight from the terminal to remove. ・ 5 3 Set microSD card into the tray with the contacts side facing up. ・ Turn the terminal horizontally and insert the tray with the card and press it straight into the slot. Be careful about the direction to insert of the tray.
Removing microSD card 6 Make sure to unmount microSD card (make reading/writing unavailable) before removing. ・ Opening/closing the cover of docomo nano UIM card/microSD card slot (P.26). 1 ・ Be careful about the direction to insert of the tray. From the Home screen, u [Settings]u [Storage & memory]. [Advanced]u [Storage]u Tap for SD Card. u 2 ・ The microSD card is unmounted. 3 Draw the cover of docomo nano UIM card/microSD card slot out (P.26).
■ File operation Use "File Commander" application to operate various data saved in the internal storage or the microSD card. 1 From the Home screen, Commander]. u [File ・ The home screen for File Commander is displayed. Tap to display the menu. ・ When a microSD card is inserted, "SD Card" appears on the home screen and the menu. 2 Select an itemu Tap a folder as required. 3 Tap a file. ・ Data can be displayed with the compatible application.
■ Deleting a folder or file 1 From the Home screen, Commander]. 2 Select an itemu Tap a folder as required. Touch and hold a folder or file you want to delete. 3 4 ■ u u [File [Delete]u [OK]. Moving/Copying a folder or file 1 From the Home screen, Commander]. 2 Select an itemu Tap a folder as required. 3 Touch and hold a folder or file you want to move/delete. 4 5 Tap / Tap at desired location. u [File .
・ Data communication Bluetooth function Bluetooth function is a technology which enables to connect with Bluetooth device such as PC, handsfree headset wirelessly. ・ The terminal does not communicate wirelessly with all types of Bluetooth devices. ・ Supported Bluetooth profiles (P.226) ❖Information Making the terminal detectable 1 From the Home screen, u [Settings]. 2 [Bluetooth]u Tap ・ If you turn off the terminal with Bluetooth turned on, Bluetooth function turns off.
Making pair setting for the terminal and Bluetooth device To connect the terminal and Bluetooth device, pair them first. ・ Once paired, the setting with the Bluetooth device is saved. ・ For make pair setting, entering passcode (PIN) may be required. Passcode (PIN) of the terminal is "0000". If you cannot make pair setting when you enter "0000", see the documentation of your Bluetooth device. 1 From the Home screen, u [Settings]u [Bluetooth]. ・ 2 3 Tap a name of Bluetooth device for pairing.
Sending/Receiving data via Bluetooth function Turn on Bluetooth function in advance, then pair with a target Bluetooth device. NFC communication You can send/receive data to/from a device with NFC such as a mobile phone. Sending data via Bluetooth function 1 [Bluetooth] from the sharing menu of each application. 2 Tap the other Bluetooth device. Receiving data 1 Send data from the other Bluetooth device. ・ 2 appears on the status bar.
・ Even if NFC / Osaifu-Keitai position for holding over is placed face to face, sending/receiving may fail. In such case, operate again to send/ receive. ・ The terminal does not communicate with all NFC devices. ・ For notes when holding over the other device (P.118). Enabling NFC Reader/Writer, P2P function 1 From the Home screen, u [Settings]u [More]. 2 [NFC / Osaifu-Keitai settings]u Tap of "Reader/Writer, P2P"u [OK].
Receiving data 1 Perform data sending operation on a sender's terminal. 2 Place the NFC / Osaifu-Keitai positions for holding over face to face with a mobile phone for sending (P.118). ・ When you receive data, appears on the status bar. Drag the status bar downwardsu Tap [Beam complete] to launch the application associated with the received data. Follow the onscreen instructions. Selecting NFC Type 1 From the Home screen, u [Settings]u [More]. 2 [NFC / Osaifu-Keitai settings]u [NFC Type].
External device connection Connecting to PC Connect a PC to exchange data between the internal storage or the microSD card and a PC. ❖Information ・ Appeared screen may vary depending on the operating system (OS) of a PC. ・ You may not be able to operate copyrighted data of images, music, etc. Connecting to PC with USB cable A to C ・ The following operating systems (OS) are supported. - Microsoft Windows 10 - Microsoft Windows 8.
Removing USB cable A to C safely ・ Do not remove the USB cable A to C during while transferring data. Data may be damaged. 1 Confirm that it is not transferring data, remove the USB cable A to C. Setting Media server 1 From the Home screen, u [Settings]u [Device connection]u [Media server]. 2 Tap 3 Connect the DLNA device to the terminal using an application on the DLNA device.
International roaming Overview of International roaming (WORLD WING) With the international roaming (WORLD WING), you can use the terminal without changing phone number or mail address in the service area of the overseas network operator affiliated with DOCOMO. You do not need to change the settings of call and SMS. For details of International Roaming Service (WORLD WING), refer to NTT DOCOMO website. https://www.nttdocomo.co.
Before using overseas Before leaving Japan To use the terminal overseas, check the following in Japan. ■ ■ ■ Subscription ・ Check if you subscribe WORLD WING. For details, contact "General Inquiries" on the last page. Charging ・ For charging, refer to NTT DOCOMO website. Usage charge ・ Overseas usage charges (call and packet communication) differ from those in Japan. For details, refer to NTT DOCOMO website. ・ Some applications perform communication automatically.
After arriving overseas When you arrive overseas and turn on the terminal, an available network is automatically set. Connectivity When you have set "Search mode" of "Service providers" (P.201) in Mobile networks to "Automatic", optimized network is automatically selected. Setting a network operator By default, the terminal automatically searches available network and connect to it. To switch network manually, set as follows.
Setting the preferred network type 1 From the Settings screen, u [Settings]u [More]u [Mobile networks]u [Preferred network type]. 2 Tap any of [4G (preferred)/3G/ GSM]/[4G/3G]/[3G/GSM]/[GSM only]. ・ Select "4G (preferred)/3G/GSM" to switch available network automatically. Using VoLTE during international roaming Set to enable VoLTE when VoLTE is available during international roaming. 1 From the Home screen, u [Settings]u [More]u [Mobile networks]. 2 Tap of "Enable VoLTE".
Making/Receiving a call in the country you stay When you arrive overseas and turn on the terminal, an available network is automatically set. ・ Check that the battery and signal levels are high enough. ・ Depending on the network operator, even if the Caller ID notification is active, the caller ID may not be notified or appear properly. In this case, calls cannot be made from the call log. 2 ・ If the area code (city code) begins with "0", omit "0".
Making a call within the country you stay Receiving a call in the country you stay You can make a call by entering the phone number of the other party's land-line phone or mobile phone in the same way you do in Japan. 1 From the Home screen, tab. 2 Enter a phone number. ・ u "Dial" Tap 4 When the call is finished, tap ・ 1 On the incoming call screen, drag (left) to (right). 2 When the call is finished, tap .
■ Having someone make a call from other than Japan to the country you stay You have to receive a call through Japan no matter where you are; therefore, the other party needs to enter the international call access code and "81" (Country code of Japan). International access code - 81 - 90 (or 80, 70) - XXXX - XXXX International roaming settings Make settings for using international roaming services. ・ For some overseas network operators, settings may not be made. 1 From the Home screen, .
Setting International dialing assist 1 From the Home screen, . 2 [Call settings]u [Roaming settings]. 3 u Tap [International dial assist]. Auto Add international prefix or country conversion code automatically. Country code Select a country code used for auto conversion. International Select an international prefix used for prefix auto conversion. Setting Network service (overseas) Set network service such as voice mail from overseas. ・ You need to set "Remote operation settings" (P.
After returning to Japan When you return to Japan, the terminal is connected to DOCOMO network automatically. If connection is failed, perform the following operations. ・ Set "Preferred network type" (P.202) to "4G (preferred)/3G/GSM". ・ Set "Search mode" to "Automatic" in "Service providers" (P.201).
* Note that some data and settings may be erased due to force-quit operation. Appendix/Index Troubleshooting ■ Troubleshooting ・ When you have a vague idea of malfunctioning, you can perform diagnosis by yourself. For details, refer to NTT DOCOMO website. https://www.nttdocomo.co.jp/support/ trouble/repair/ (in Japanese only) ・ Check if the software update is necessary for the terminal. If necessary, perform the software update (P.220, P.224).
Battery Care charging does not start ・ Battery Care charging cannot start when learning is not complete because regularity in your charging habit has not been found. → P.35 Cannot charge fully ・ If you remove charging equipment during Battery Care charging, the terminal may not be fully charged. To charge fully, from the Home screen, u [Settings]u [Battery]u [Battery Care] u Tap to turn off Battery Care and then switch to normal charge. → P.35 ■ Terminal operation Become hot while operating/charging.
Operations are not possible when tapping or pressing keys. ・ Check if the power is turned off. → P.39 ・ Check if you activate the screen lock. → P.177 ・ When you touch the screen at a right angle by gloved finger with "Glove mode" ON, operation may not be performed well. Use a ball of finger to touch the screen for operation. → P.165 The screen reacts slowly when you tap or press keys.
■ ・ Phone call Cannot make a call even if you tap . ・ Check if you activate Airplane mode. → P.154 The ringtone does not sound. ・ Is "Ring volume" set to silent? → P.167 ・ Check if the following functions are activated. - Silent mode → P.44 - Airplane mode → P.154 ・ Is the ring time for Voicemail service or Call forwarding service "0 sec"?→ P.93 ・ Check if Pick up after in Answering Machine is set to "0 second".→ P.92 ・ Check if you set Call Blocking. → P.
■ Mail ■ Mail is not received automatically. ・ Check if you set "Check frequency" in Email account settings to "Manual".→ P.108 ■ ■ Osaifu-Keitai function is unavailable. ・ When Omakase Lock is set, Osaifu-Keitai functions are unavailable regardless of the NFC / Osaifu-Keitai lock settings. ・ Check if NFC / Osaifu-Keitai lock setting is set. → P.119 ・ Check if you hold NFC / Osaifu-Keitai position over an IC card reader?→ P.118 Camera Still pictures and video taken with the camera are blurred.
Cannot perform data communication overseas. ・ Turn on "Data roaming". → P.201 The terminal suddenly became unavailable while using overseas. ・ Check if usage amount exceeds the limit of maximum charges for use. For use of "International roaming (WORLD WING)", the limit of maximum charges for use is set in advance. If exceeding the limit of maximum charges for use, pay the charges. Cannot receive calls overseas. ・ Is "Restricting incoming calls" set to "Activate restriction"? → P.
Calls cannot be made from the terminal connecting to external device such as car navigation or handsfree device. ・ If calls are made several times when the other party does not answer or is out of service, the call to this number may be disabled. In this case, turn terminal off and on. ■ External device connection An external device connected using USB cable A to C etc. is not recognized. ・ Remove the external device and attach again, then tap [Detect USB device]u [OK]. → P.
● ● ● ● ● ● ● Call not sent This appears when making a voice call or video call is not available. During a video call, making a voice call to another party is not available. Also, if the other party's phone is not compatible with video call, or during a voice call, making a video call is not available. Normal calls are restricted by access control. Appears when normal voice call service is hard to receive because communication lines are busy. All calls are restricted by access control.
・ あんしん遠隔サポート (Anshin Enkaku Support) By sharing screens of your terminal with NTT DOCOMO, you can receive technical support to make settings, use applications, or connect peripheral devices such as PC. (in Japanese only). ・ This service is not available when your docomo nano UIM card is not inserted, during international roaming, or in Airplane mode. ・ Anshin Enkaku Support is a service requiring subscription. ・ Some operations and settings are not supported.
Warranty and After Sales Services * Data such as phonebook entries can be backed up by using docomo cloud. After Sales Services Warranty ・ Make sure that the warranty is received with the terminal upon purchase. Check to be sure that " 販売店名・お買い上げ日 (the name of the retailer, date of purchase)", and other items have been filled out on the warranty before storing it in a safe place. If any necessary information is not provided, immediately contact the retailer and request to complete the warranty.
■ The terminal has been repaired by a repair office other than the DOCOMO specified one. * Even if repair is possible, it will be done at the owner's expense, as this type of corrosion or damage is not covered by the warranty. ・ We repair the terminal free of charge based on the terms documented in the warranty. ・ When requesting a repair, make sure to bring the warranty card with the terminal.
Precautions ● Never modify the terminal or accessories. ・ Doing so may result in fire, injuries or malfunctions. ・ The modified terminal may be repaired only if the owner agrees on that all the modified parts are restored to the original conditions. However, repairs may be refused depending on the modifications. The following cases may be considered as modifications. - Put a seal etc. on the display or key part - Glued decorations on the terminal using adhesion bond, etc.
Created data and download information Note that data you created or data you retrieved or downloaded from sources other than your terminal may be changed or lost when you change the model or have repairs done to the terminal. DOCOMO shall have no liability for any change or loss of any kind. DOCOMO shall have no liability for packet communication charge for re-downloading data. Under some circumstances, DOCOMO may replace your terminal with its equivalent instead of repairing it.
Notes ・ When the software is updated, restoring the previous software is not possible. ・ When performing update, the private information concerning the terminal (model, serial number, etc.) is automatically sent to the server of DOCOMO. DOCOMO does not use the sent information for purposes except software update. ・ For using packet communication via Xi/ FOMA, communication charge is not applied for downloading.
Updating software ■ ・ You need to perform the installation by yourself for updating software. Drag the status bar downu Tap a notificationu Tap [install]. ・ To change the auto-update setting, from the Home screen, u [Settings]u [About phone] u [Software Update]u Tap of / of "Auto download". ・ When "Auto download" is OFF, perform operation of "When the icon does not appear in the status bar" (P.222). Depending on update, a confirmation screen for performing update appears after [Update now] is tapped.
❖Information ・ When the latest software is already applied to the terminal, "No upgrade is needed. Use it as it is." appears. ・ If downloading stops halfway, data downloaded before interruption is retained for up to 14 days. To resume downloading, resume from (Download stopped) on the Notification panel. ・ When "Perform at scheduled time (via Wi-Fi/Xi)" is selected, time for downloading is automatically set.
Connecting to a PC to upgrade Install a software for "Software update" beforehand. For methods of software installation, refer to the following website. http://www.sonymobile.co.jp/support/ (In Japanese only) Main specification ■ The terminal Product name Size Weight Internal memory External memory compatible Continuous FOMA/3G stand-by time GSM LTE Continuous FOMA/3G call time GSM VoLTE call (voice) Charging time Continuous Full seg watching time SO-03J Approx. 146 mm (H)u approx. 72 mm (W)u approx.
Continuous 1Seg watching time Display Type/ Colors Approx. 550 min. TFT (Triluminos® Display for Mobile) 16,777,216 colors Size Approx. 5.2 inches Resolution 1,080 (H)u1,920 (V) pixels (Full HD) Image Type Camera : Backsidepickup illumination layered CMOS device Front camera : Backsideillumination layered CMOS Size Camera : 1/2.3 inches Front camera : 1/3.0 inches Camera effective pixels Camera : Approx. 23,000,000 pixels Front camera : Approx. 13,200,000 pixels Camera recorded pixels Camera : Approx.
Bluetooth Version Radio power Available communication distance*3 Supported profile/ codec*4 (version) Headset jack Size Pole*5 4.2*2 power class 1 Within approx. 10 m HFP (1.7), HSP (1.2), OPP (1.2), SPP (1.2), HID (1.0), A2DP (1.2) (LDAC/aptX/ SBC), AVRCP (1.3), PBAP (1.1.1), PAN (PAN-NAP (1.0)/PANU (1.0)), HOGP (1.0), MAP (1.2) Diameter 3.5 mm 5-pole *1 It supports MIMO.
■ Internal battery Battery type Lithium Ion Battery Voltage 3.8V DC Nominal 2900mAh battery capacity* * It is a battery capacity for providing an indication of continuous usage time etc. ■ TV antenna cable SO01 Size Weight ■ Length : approx. 148 mm Approx. 5 g File format (media) The terminal supports the display or playback of the following file formats: Type Sound Still image* File format AAC-LC (.mp4, .m4v, .3gp, .3gpp, .ts, .avi, .aac, .m4a), AAC+ (.mp4, .3gp, .3gpp, .ts, .avi, .
Portuguese (Portugal)/Romanian/Albanian/ Slovak/Slovene/Serbian/Finnish/Swedish/ Tagalog/Vietnamese/Turkish/Greek/ Bulgar/Kazakh/Macedonian/Russian/ Armenian/Ukrainian/Marathi/Hindu/ Bengalee (Bangladesh)/Bengalee (India)/ Tamil/Telugu/Kannada/Malayalam/Thai/ Korean/Chinese (Traditional)/Chinese (Simplified)/Chinese (Hong Kong)/ Azerbaijani/Belarusan/Kartuli/Tatar/Punjabi (Canada)/Punjabi (India) Language ■ Display language Japanese/Indonesian/Malay/Sundanese/ Bosnian/Catalan/Czech/Danish/German (Germany)
German/Dogri/Nepali/Norwegian/Hausa/ Hungarian/Basque/Punjabi/Hindu/ Burmese/Finnish/French (Canada)/French (France)/Bulgarian/Breton language/ Hebrew/Vietnamese/Belarusan/Bengali/ Persian/Bosnian/Bodo language/ Portuguese (Brazil)/Portuguese (Portugal)/ Polish/Maithili language/Macedonian/ Malagasy/Meithei language/Malayalam/ Marathi/Malay/Mongolian/Yoruba language/Laotian/Latvian/Lithuanian/ Romanian/Russian/Chinese (China)/ Chinese (Taiwan)/Chinese (Hong Kong)/ English (Australia)/English (Canada)/Englis
End User Licence Agreement Software delivered with this device and its media is owned by Sony Mobile Communications Inc., and/or its affiliated companies and its suppliers and licensors. Sony Mobile grants you a non-exclusive limited license to use the Software solely in conjunction with the Device on which it is installed or delivered. Ownership of the Software is not sold, transferred or otherwise conveyed.
Export Controls and Regulations This product and its accessories may be covered and controlled by Japans export control regulations ("Foreign Exchange and Foreign Trade Law" and related laws and regulations) And, they are also under coverage of Export Administration Regulations of the U.S. When exporting and reexporting this product and its accessories, take necessary procedures on your responsibility and expense.
Trademarks The company names and product names appearing in this manual are trademarks or registered trademarks of their respective holders.
・ ・ microSD logo, microSDHC logo and microSDXC logo are trademarks of SD-3C, LLC. USB Type-C™ is a trademark of USB Implementers Forum. ・ is a registered trademark of FeliCa Networks, Inc. ・ FeliCa is a contactless IC card technology developed by Sony Corporation. ・ is a trademark or registered trademark of NFC Forum, Inc. in the US and other countries. ・ "Twitter" is a trademark or registered trademark of Twitter, Inc.
decline an upgrade, you will not be able to access content that requires the upgrade.
Index A About phone ・・・・・・・・・・・・・・・・・・・・・・・・ 186 Access point Initializing ・・・・・・・・・・・・・・・・・・・・・・・・・ 163 Setting・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 163 Accessibility ・・・・・・・・・・・・・・・・・・・・・・・・・ 185 Account & sync ・・・・・・・・・・・・・・・・・・・・・・・ 181 Removing ・・・・・・・・・・・・・・・・・・・・・・・・・ 181 Accounts & services ・・・・・・・・・・・・・・・・・・・ 180 Adjusting sound volume ・・・・・・・・・・・・・・・ 167 Airplane mode ・・・・・・・・・・・・・・・・・・・・・・・ 154 Alarm ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 149 Alarm volume ・・・・・・・・・・・・・・・・・・・・・・・・ 167 Album ・・・・・・・・・・・・・・・・・・・・・・
Pair setting ・・・・・・・・・・・・・・・・・・・・・・・・ Receiving ・・・・・・・・・・・・・・・・・・・・・・・・・ Sending ・・・・・・・・・・・・・・・・・・・・・・・・・・・ Bookmarks ・・・・・・・・・・・・・・・・・・・・・・・・・・ Brightness level ・・・・・・・・・・・・・・・・・・・・・・ 193 194 194 113 165 C Calculator ・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 61 Calendar ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 60 Call・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 84 Answering with Answering Machine ・・・・ 87 Calling screen ・・・・・・・・・・・・・・・・・・・・・・・ 89 Declining a call ・・・・・・・・・・・・・・・・・・・・・・ 88 Ending ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 89 Making a
Device connection ・・・・・・・・・・・・・・・・・・・・ 159 Dial ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 61 Disaster kit ・・・・・・・・・・・・・・・・・・・・・・・・・・・ 60 Display・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 164 dmarket・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 115 dmenu ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 115 docomo apps password ・・・・・・・・・・・・・・・・ 180 docomo backup ・・・・・・・・・・・・・・・・・・・・・・ 150 docomo mail ・・・・・・・・・・・・・・・・・・・・・・・・・ 102 docomo nano UIM card ・・・・・・・・・・・・・・・・・ 31 Precautions ・・・・・・・・・・・・・・・・・・・・・・・・・ 21 docomo service/cloud ・・・・・・・・・・・・・・・・・ 180 docomo v
Hangouts ・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 62 Home・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 164 Home application docomo ・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 76 Switching ・・・・・・・・・・・・・・・・・・・・・・・・・・ 68 Xperia ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 53 Home screen ・・・・・・・・・・・・・・・・・・・・・・・・・・ 52 Adding (docomo LIVE UX) ・・・・・・・・・・・・・ 78 Adding (Xperia Home) ・・・・・・・・・・・・・・・・ 53 Backup ・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 81 Deleting (docomo LIVE UX) ・・・・・・・・・・・・ 78 Deleting (Xperia Home) ・・・・・・・・・・・・・・・ 53 docomo LIVE UX ・・・・・・・・・・・・・・・・・・・・・ 76 Folder (
Setting・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 104 Messenger ・・・・・・・・・・・・・・・・・・・・・・・・・・・ 64 microSD card ・・・・・・・・・・・・・・・・・・・・・・・・ 187 Formatting ・・・・・・・・・・・・・・・・・・・・・・・・ 170 Unmounting ・・・・・・・・・・・・・・・・・・・・・・・ 170 Missed call・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 92 Moji-Henshu ・・・・・・・・・・・・・・・・・・・・・・・・・・ 75 Movie Creator ・・・・・・・・・・・・・・・・・・・・・・・・・ 64 Multi-tap input ・・・・・・・・・・・・・・・・・・・・・・・・ 73 Music ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 63 My Magazine ・・・・・・・・・・・・・・・・・・・・・・・・・ 82 My profile Display ・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 97 Edit
Play Movies & TV・・・・・・・・・・・・・・・・・・・・・・・ 64 Play Music ・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 64 Play Store ・・・・・・・・・・・・・・・・・・・・・・・・・・・ 116 Installing ・・・・・・・・・・・・・・・・・・・・・・・・・・ 116 Uninstalling・・・・・・・・・・・・・・・・・・・・・・・・ 116 Playing video ・・・・・・・・・・・・・・・・・・・・・・・・ 142 PlayStation ・・・・・・・・・・・・・・・・・・・・・・・・・・・ 64 Portrait view ・・・・・・・・・・・・・・・・・・・・・・・・・・ 43 Preferred network type ・・・・・・・・・・・・・・・・ 202 Proximity/light sensor ・・・・・・・・・・・・・・・・・・ 30 Public mode (power OFF) setting ・・・・・・・・・ 94 Q Quick settings panel ・・・・・・・・・・・・
System・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 183 U T USB connection ・・・・・・・・・・・・・・・・・・・・・・ 197 USB Storage ・・・・・・・・・・・・・・・・・・・・・・・・・ 170 Users ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 178 Take screenshot ・・・・・・・・・・・・・・・・・・・・・・・ 45 Task manager ・・・・・・・・・・・・・・・・・・・・・・・・・ 67 Tethering ・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 159 Bluetooth tethering ・・・・・・・・・・・・・・・・・ 161 Portable Wi-Fi hotspot ・・・・・・・・・・・・・・・ 160 USB tethering ・・・・・・・・・・・・・・・・・・・・・・ 160 Text editing ・・・・・・・・・・・・・・・・・・・・・・・・・・・ 74 Theme ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 5
WORLD CALL ・・・・・・・・・・・・・・・・・・・・・・・・・ 86 World clock ・・・・・・・・・・・・・・・・・・・・・・・・・・ 149 WORLD WING ・・・・・・・・・・・・・・・・・・・・・・・・ 199 X Xperia Japanese keyboard ・・・・・・・・・・・・・・・ 70 Online help ・・・・・・・・・・・・・・・・・・・・・・・・・ 69 Xperia Lounge Japan ・・・・・・・・・・・・・・・・・・・ 65 Y YouTube ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 65 Numerics 1Seg ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 122 Appendix/Index 242
Make various applications, check your subscription, and more online The terminal: d メニュー (dmenu) u [My docomo(お客様サポート)(My docomo (Customer support))] u [ドコモオンライン手続き (docomo online procedures)] PC: My docomo (https://www.nttdocomo.co.jp/mydocomo/ ) u Select the item in " ドコモオンライン手続き (docomo online procedures)" (in Japanese only) * There are cases where the site may not be available due to system maintenance, etc.
General Inquiries 0120-005-250 (toll free) Repairs (Inquiries/Request) ■ From DOCOMO mobile phones (In Japanese only) (No prefix) 113 (toll free) *Service available in: English, Portuguese, Chinese, Spanish. *Unavailable from part of IP phones. (Business hours: 9:00 a.m. to 8:00 p.m.) *Unavailable from land-line phones, etc.
Radio Wave Exposure and Specific Absorption Rate (SAR) Information Important Information United States THIS PHONE MODEL HAS BEEN CERTIFIED IN COMPLIANCE WITH THE GOVERNMENT'S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. The SO-03J Series mobile phones have been designed to comply with applicable safety requirements for exposure to radio waves. Your wireless phone is a radio transmitter and receiver.
Use of third-party accessories may result in different SAR levels than those reported. ** Before a phone model is available for sale to the public in the US, it must be tested and certified by the Federal Communications Commission (FCC) that it does not exceed the limit established by the government-adopted requirement for safe exposure*. The tests are performed in positions and locations (i.e., by the ear and worn on the body) as required by the FCC for each model.
FCC Statement for the USA This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Any change or modification not expressly approved by Sony may void the user's authority to operate the equipment.
Declaration of Conformity for SO-03J Hereby, Sony Mobile declares that the radio equipment type PM-1024-BV is in compliance with Directive: 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.sonymobile.co.