Manualshelf

User's Manual

ManualsBrandsSony Mobile Communications ManualsElectronicsGSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n and NFC
1234
Device basics
7
6
3
1
2
5
4
1 Charging/Notification light
2 NFC
3 Volume/Zoom key
4 Power key
5 Nano SIM/Memory card slot
6 Camera key
7 Charger/USB Type-C™ cable port
To insert the nano SIM cards and the
memory card
Do not cut your SIM cards, for example using a blade or
scissors, as this may damage your device.
1
Using your fingernail, drag out the SIM card tray.
2
Firmly place the primary SIM card (SIM 1) in the correct
orientation in position (1) as shown in the illustration.
3
Firmly place the additional SIM card (SIM 2) in the
correct orientation in position (2) as shown in the
illustration.
4
Insert the memory card in the correct orientation into the
memory card slot as shown in the illustration.
5
Gently push the tray back into the slot until it fits into
place.
To turn on the device
It is important to use the USB Type-C™ cable (provided)
when charging your device as other types of USB cables
can damage your device. It is recommended to charge
the battery for at least 30 minutes before you turn on the
device for the first time.

Summary of content (4 pages)