User's Manual

Device basics
SIM
microSD
2
1
3
4
6
5
8
9
7
SIM
SIM2
1 Charging/Notification light
2 Volume/Zoom key
3 Power key/Fingerprint sensor
4 NFC
5 Nano SIM/Memory card slot
6 Camera key
7 Charger/USB Type-C™ cable port
8 Tray 1 for SIM card 1
9 Tray 2 for SIM card 2 or memory card
To insert two nano SIM cards or a nano
SIM card and a memory card
SIM2
microSD
SIM
SIM2
microSD
2
1
2
Using two SIM cards and a memory card at the same
time is not possible. Tray 2 allows you to use either a
second SIM card or an additional memory card. Do not
cut your SIM cards, as this may damage your device.
1
Drag out tray 1 and tray 2.
2
Place the main SIM card securely in tray 1, as shown in
the illustration.
3
Place either the second SIM card or the memory card
securely in tray 2, as shown in the illustration.
4
Gently push first tray 1, then tray 2, back into their slots
until they fit into place.
To turn on the device
It is important to use the USB Type-C™ cable (provided)
when charging your device, as other types of USB
cables can damage your device. It is recommended to
charge the battery for at least 30 minutes before you turn
on the device for the first time.
1
Press and hold down the power key
until the device
vibrates.
2
Wait a moment for the device to start.