C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\00COVHTA9UC2\010COV_AC_UC2.fm 010COV_AC_UC2.
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\020REG.fm 010COV.book Page 2 Wednesday, November 25, 2020 3:33 PM Owner’s Record The model and serial numbers are located on the bottom of the control box. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding the speaker system. Model No. HT-A9 Serial No. WARNING To reduce the risk of fire or electric shock, do not expose this speaker system to rain or moisture.
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\020REG.fm 010COV.book Page 3 Wednesday, November 25, 2020 3:33 PM in a residential installation. This speaker system generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\020REG.fm 010COV.book Page 4 Wednesday, November 25, 2020 3:33 PM masterpage: Left For customers in Canada Properly shielded and grounded cables and connectors must be used for connection to host computers and/or peripherals. This speaker system contains licenseexempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s).
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\010COVTOC.fm 010COV.book Page 5 Wednesday, November 25, 2020 3:33 PM masterpage: Right Table of Contents About Manuals of the Speaker System ......................................7 Startup Guide What’s in the Box (separate document) What You Can Do with the Speaker System ..................................... 8 Guide to Parts and Controls .........10 Using the Home Menu ................. 14 Setting up Installing the Speaker System ......
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\010COVTOC.fm 010COV.book Page 6 Wednesday, November 25, 2020 3:33 PM masterpage: Left Troubleshooting Troubleshooting .......................... 47 Resetting the Speaker System .... 55 Additional Information Specifications ................................57 Supported Input Audio Formats .................................. 60 On BLUETOOTH Communication ......................61 END USER LICENSE AGREEMENT ...........................
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\030MANU.fm 010COV.book Page 7 Wednesday, November 25, 2020 3:33 PM masterpage: Right Help Guide (Web manual) About Manuals of the Speaker System The information included in each manual is as shown below. Startup Guide Home Theatre System Startup Guide Introduces the initial procedures concerning installation and connection for using the speaker system, and operations until you play music.
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\040WYD.fm masterpage: Left 010COV.book Page 8 Wednesday, November 25, 2020 3:33 PM What You Can Do with the Speaker System The speaker system supports object-based audio formats such as Dolby Atmos and DTS:X as well as HDR video formats such as HDR10, HLG, and Dolby Vision. TV Blu-ray Disc™ player, set-top box, gaming console, etc.
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\040WYD.fm 010COV.book Page 9 Wednesday, November 25, 2020 3:33 PM masterpage: Right Network Wireless LAN router Internet “What You Can Do by Connecting the Speaker System to a Network” (page 32) For the connecting method to the network and functions enabled with the network connection, refer to Help Guide (Web manual). For customers in Americas https://rd1.sony.net/help/ht/a9/h_uc/ For customers in other countries/regions https://rd1.
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\050PAC.fm 010COV.book Page 10 Wednesday, November 25, 2020 3:33 PM masterpage: Left Guide to Parts and Controls Control Box Front Remote control sensor Point the remote control at the remote control sensor to operate the speaker system. Front panel display UPDATE port (page 46) Connect the USB memory when updating the speaker system.
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\050PAC.fm 010COV.book Page 11 Wednesday, November 25, 2020 3:33 PM masterpage: Right Speakers Rear Front Bottom Power indicator Displays the connecting status between the control box and speaker as well as the power condition of the speaker. Red – Lights up: The speaker is in standby mode. Green – Lights up: The speaker is connected to the control box. – Flashes slowly: The speaker is attempting to connect to the control box.
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\050PAC.fm masterpage: Left 010COV.book Page 12 Wednesday, November 25, 2020 3:33 PM Remote Control (power) Turns on the speaker system or sets it to standby mode. (MUSIC SERVICE) button If you have previously played music on Spotify on the speaker system, you can resume playback by pressing this button. This button may not be available in some countries/regions.
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\050PAC.fm 010COV.book Page 13 Wednesday, November 25, 2020 3:33 PM REAR (rear speakers volume) +/– Adjusts the volume of the rear speakers. (volume) +*/– Adjusts the volume. BASS (bass sound volume) +/– Adjusts the volume of the bass sound or optional subwoofer when connecting it.
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\050PAC.fm 010COV.book Page 14 Wednesday, November 25, 2020 3:33 PM Using the Home Menu You can display the home menu on the TV screen by connecting the speaker system and TV with an HDMI cable. 3 masterpage: Left Press /// to select the item that you want, then press (enter). The selected input or setting display appears on the TV screen. To return to the previous screen, press BACK. ///, (enter) HOME BACK 1 Press HOME.
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\070CON.fm masterpage: Right 010COV.book Page 15 Wednesday, November 25, 2020 3:33 PM 1 Setting up Prepare screws (not supplied) that are suitable for the wall mounting hole on the rear of the speaker. Installing the Speaker System 4 mm (5/32 in) More than 30 mm (1 3/16 in) Installing the Control Box and Speakers 4.2 mm (11/64 in) For the installation, refer to Startup Guide (separate document). 9.
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\070CON.fm 010COV.book Page 16 Wednesday, November 25, 2020 3:33 PM 4 Hang the speakers by confirming the type of the speakers. Check the label on the bottom of the speaker. • “FL”: Front left • “FR”: Front right • “RL”: Rear left • “RR”: Rear right.
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\070CON.fm 010COV.book Page 17 Wednesday, November 25, 2020 3:33 PM When Your TV Has the SCENTER SPEAKER IN Jack You can output the center part of the speaker system sound from the TV by connecting the TV with the following method. 1 2 masterpage: Right Note Make sure that the connectors are firmly inserted. Tip If the length of the TV center speaker mode cable is not sufficient, use a commercially available stereo mini cable.
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\070CON.fm 010COV.book Page 18 Wednesday, November 25, 2020 3:33 PM masterpage: Left Tips Connecting an AV Device Connecting an AV Device Compatible with the 2K/4K Video Format You can output sound such as Dolby Atmos, Dolby TrueHD, and DTS:X in high quality by connecting an AV device to the speaker system. 1 Connect the HDMI OUT jack on the AV device and HDMI IN jack on the speaker system with an HDMI cable (not supplied).
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\070CON.fm 010COV.book Page 19 Wednesday, November 25, 2020 3:33 PM masterpage: Right When the eARC compatible HDMI IN jack on the TV supports the 8K video input: When the eARC compatible HDMI IN jack on the TV does not support the 8K video input: Connect the HDMI IN jack on the speaker system and HDMI OUT jack on an AV device with an HDMI cable (not supplied).
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\070CON.fm 010COV.book Page 20 Wednesday, November 25, 2020 3:33 PM Connecting to the AC Outlet (mains) 1 2 masterpage: Left Connect the AC power cords (mains leads) (supplied) to the AC inlets on four speakers, then connect to the AC outlets (mains). Connect the AC adaptor (supplied) and AC power cord (mains lead) (supplied)* to the DC IN terminal of the control box, then connect to the AC outlet (mains).
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\070CON.fm masterpage: Right 010COV.book Page 21 Wednesday, November 25, 2020 3:33 PM Performing Initial Settings 1 3 Press (power) on the remote control supplied with the speaker system to turn on the speaker system. Operate the remote control by pointing it toward the front of the control box. When the speaker system turns on, [SETUP] appears in the front panel display.
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\070CON.fm masterpage: Left 010COV.book Page 22 Wednesday, November 25, 2020 3:33 PM Notes • Depending on the order in which you turn on the TV and the speaker system, the speaker system may be muted and [MUTING] is displayed on the front panel display of the speaker system. If this happens, turn all devices off, then turn on the speaker system after turning on the TV.
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\070CON.fm 010COV.book Page 23 Wednesday, November 25, 2020 3:33 PM 4 5 6 7 masterpage: Right Press LINK on all the speakers. The power indicators of the speakers flash twice repeatedly in green. Select [Start]. The manual connection starts. The connecting process appears on the TV screen. To cancel the manual connection, select [Cancel]. When all the speakers display [Connected], select [Finish]. Press (enter).
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\080WAT.fm 010COV.book Page 24 Wednesday, November 25, 2020 3:33 PM Watching Images Watching TV 1 2 3 4 Press HOME. The home menu appears on the TV screen. Playing the Connected AV Device 1 2 Select [Watch] - [TV] on the home menu. Select the program using the TV remote control. The selected TV program appears on the TV screen and the TV sound is output from the speaker system. Adjust the volume (page 34).
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\090LST.fm masterpage: Right 010COV.book Page 25 Wednesday, November 25, 2020 3:33 PM Listening to Music/Sound Listening to Sony TV Sound with the BLUETOOTH® Function What You Can Do by Connecting a TV with the BLUETOOTH Function Listening to TV Sound by Connecting the Speaker System and TV Wirelessly You need to perform pairing of the speaker system and TV by using the BLUETOOTH function.
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\090LST.fm 010COV.book Page 26 Wednesday, November 25, 2020 3:33 PM 5 6 7 8 9 On the TV, search the speaker system by performing the pairing operation. The list of the BLUETOOTH devices that are detected appears on the TV screen. For the operation method to pair the BLUETOOTH device to the TV, refer to the operating instructions of the TV.
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\090LST.fm 010COV.book Page 27 Wednesday, November 25, 2020 3:33 PM About operations with the remote control that is supplied with the speaker system You can use the following buttons.
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\090LST.fm 010COV.book Page 28 Wednesday, November 25, 2020 3:33 PM 2 Make sure that [PAIRING] appears in the front panel display. The speaker system enters the pairing mode. PAIRING 3 4 5 6 7 system goes into pairing mode simply by changing the input to the BLUETOOTH input. • Perform pairing for the second and subsequent mobile devices.
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\090LST.fm 010COV.book Page 29 Wednesday, November 25, 2020 3:33 PM 5 Adjust the volume (page 34). You can play or pause the content by using the playback operation buttons on the remote control. Note If sound delay occurs, it may be improved by setting [Setup] - [Advanced Settings] - [Bluetooth Settings] - [Bluetooth Connection Quality] to [Priority on Stable Connection].
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\090LST.fm 010COV.book Page 30 Wednesday, November 25, 2020 3:33 PM 7 Adjust the volume. Adjust the volume level of the headphones first. Then, adjust the volume level of the headphones with (volume) +/– on the remote control. To remove the paired headphones from the device list 1 Press HOME. The home menu appears on the TV screen. 2 Select [Setup] - [Advanced Settings] on the home menu. 3 Select [Bluetooth Settings] - [Device List].
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\090LST.fm 010COV.book Page 31 Wednesday, November 25, 2020 3:33 PM masterpage: Right To disconnect the paired headphones Perform any of the following items. – Disable the BLUETOOTH function on the headphones. – Set [Setup] - [Advanced Settings] [Bluetooth Settings] - [Bluetooth Mode] to [Receiver] or [Off]. – Turn off the speaker system or headphones.
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\100NET.fm 010COV.book Page 32 Wednesday, November 25, 2020 3:33 PM masterpage: Left Listening to Music by Connecting to a Network What You Can Do by Connecting the Speaker System to a Network You can perform streaming playback of music content via the speaker system by operating a smartphone, tablet, or iOS device, or play music stored on a computer via the speaker system by connecting to the network.
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\100NET.fm 010COV.book Page 33 Wednesday, November 25, 2020 3:33 PM masterpage: Right Sony | Music Center You can control the speaker system wirelessly by installing the “Sony | Music Center” app on your smartphone or tablet device. Home Network You can play music files stored on your computer on a network location via your home network.
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\110SOU.fm 010COV.book Page 34 Wednesday, November 25, 2020 3:33 PM Adjusting the Volume and Sound Quality masterpage: Left created from the 2-channel sound using virtual processing. When the input source does not contain much surround sound, the surround sound from the rear speakers may be difficult to hear.
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\110SOU.fm 010COV.book Page 35 Wednesday, November 25, 2020 3:33 PM Enjoying Immersive Surround Experience (IMMERSIVE AE) You can feel immersed by the sound from not only the horizontal direction, but also from the upward direction by working sound modes effectively (page 36). This function also works for the 2.0 channel signal such as TV programs.
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\110SOU.fm 010COV.book Page 36 Wednesday, November 25, 2020 3:33 PM Setting the Sound Effect That Is Tailored to Sound Sources (Sound Mode) You can easily enjoy pre-programmed sound effects that are tailored to different kinds of sound sources. This function works when [Setup] [Advanced Settings] - [Audio Settings] [Sound Effect] is set to [Sound Mode On].
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\110SOU.fm 010COV.book Page 37 Wednesday, November 25, 2020 3:33 PM Making Dialogs Clearer (VOICE) masterpage: Right Enjoying Clear Sound with Low Volume at Midnight (NIGHT) VOICE NIGHT 1 Press VOICE to set the function on or off. The voice mode setting appears on the TV screen. Mode Explanation [Voice: On] Dialog is easily heard by enhancing dialog range. [Voice: Off] 1 Press NIGHT to set the function on or off.
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\110SOU.fm 010COV.book Page 38 Wednesday, November 25, 2020 3:33 PM Adjusting the Delay Between the Picture and Sound When the sound does not match the pictures on the TV screen, you can adjust the delay between the picture and sound. The setting method differs depending on the input. For details, refer to Help Guide.
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\110SOU.fm 010COV.book Page 39 Wednesday, November 25, 2020 3:33 PM Adjusting the Dialog Volume While the DTS:X Content is Played Back By adjusting the dialog volume, you can easily listen to dialog since it stands out from the ambient noise. This function works while playing content that is compatible with the DTS:X dialog control function. The setting method differs depending on the input.
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\120HDM.fm masterpage: Left 010COV.book Page 40 Wednesday, November 25, 2020 3:33 PM Using the Speaker System by Interlocking with a TV Operating the Speaker System by Interlocking with a TV (Control for HDMI function) Connecting a TV compatible with the Control for HDMI function using an HDMI cable enables you to interlock the speaker system operation such as power on/off or volume adjustment with a TV.
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\120HDM.fm 010COV.book Page 41 Wednesday, November 25, 2020 3:33 PM masterpage: Right Volume adjustment The sound of the TV you are watching is output from the speaker system automatically. You can adjust the speaker system volume by the TV remote control.
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\120HDM.fm 010COV.book Page 42 Wednesday, November 25, 2020 3:33 PM masterpage: Left Home Theatre Control Function Setting the speaker system, setting the sound mode settings, input switching, etc. can be done without switching the TV input.
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\130SET.fm 010COV.book Page 43 Wednesday, November 25, 2020 3:33 PM Changing the Settings Changing the Brightness of the Front Panel Display and Indicators (DIMMER) masterpage: Right about 10 seconds. However, in some cases, the front panel display and indicators may not turn off. In this case, the brightness of the front panel display and indicators are the same as [Dimmer: Dark].
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\130SET.fm 010COV.book Page 44 Wednesday, November 25, 2020 3:33 PM Saving Power in Standby Mode Check that you have made the following settings: – [Setup] - [Advanced Settings] [HDMI Settings] - [Standby Through] is set to [Off]. – [Setup] - [Advanced Settings] [System Settings] - [Network/ Bluetooth Standby] is set to [Off].
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\130SET.fm 010COV.book Page 45 Wednesday, November 25, 2020 3:33 PM masterpage: Right Performing Advanced Settings Using the [Advanced Settings] Menu You can make various adjustments to items such as picture and sound on the [Advanced Settings] menu. 1 2 3 Press HOME. The home menu appears on the TV screen. Select [Setup] - [Advanced Settings] on the home menu. The [Advanced Settings] screen appears on the TV screen.
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\130SET.fm 010COV.book Page 46 Wednesday, November 25, 2020 3:33 PM Updating the Software By updating your software to the latest version, you can take advantage of the newest functions. For information about update functions, visit the following website: • For customers in Americas https://www.sony.com/am/support • For customers in Europe https://www.sony.
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\140TBS.fm 010COV.book Page 47 Wednesday, November 25, 2020 3:33 PM 2 Troubleshooting Troubleshooting If the speaker system does not work properly, handle it in the following order. 1 masterpage: Right Search for the cause and solution of the issue on the Sony support site. Sony support site provides latest support information and Frequently Asked Questions. • For customers in Americas https://www.sony.
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\140TBS.fm 010COV.book Page 48 Wednesday, November 25, 2020 3:33 PM Power The speaker system does not power up. Check that the AC power cord (mains lead) is connected securely. Disconnect the AC power cord (mains lead) from the wall outlet (mains), and then reconnect after several minutes. The speaker system does not turn on even when the TV is turned on. Set [Setup] - [Advanced Settings] - [HDMI Settings] - [Control for HDMI] to [On].
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\140TBS.fm 010COV.book Page 49 Wednesday, November 25, 2020 3:33 PM box, or install the control box far away from the TV/other wireless devices. There is an interference of the frequency band between the wireless LAN and the wireless connection of the speakers. Switch the band of the wireless LAN connection of the TV or device that is playing an image to 2.4 GHz. 3D content from the HDMI IN jack does not appear on the TV screen.
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\140TBS.fm 010COV.book Page 50 Wednesday, November 25, 2020 3:33 PM indicator on the speaker lights in green. – Connect the speaker and control box manually (page 22). – Check the status of the wireless connection in [Setup] [Advanced Settings] - [Speaker Settings] - [Wireless Speaker Settings] - [Check wireless connection].
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\140TBS.fm 010COV.book Page 51 Wednesday, November 25, 2020 3:33 PM connection of the peripheral device to the wired LAN. The control box and speakers are installed too far away from each other. Bring them closer together. If there is any obstacle between the control box and speakers, remove it or move the control box and speakers away from the obstacle. Do not install the control box in the inner position of a shelf.
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\140TBS.fm 010COV.book Page 52 Wednesday, November 25, 2020 3:33 PM Press or (volume) + on the remote control to cancel the muting function (page 12). Make sure the input source is selected correctly. You should try other input sources by pressing the input select button on the remote control (TV/ HDMI/BLUETOOTH). Make sure that the connectors are firmly inserted.
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\140TBS.fm 010COV.book Page 53 Wednesday, November 25, 2020 3:33 PM BLUETOOTH connection cannot be completed. Make sure that [BT] appears in the front panel display (page 27). Make sure the BLUETOOTH device to be connected with is turned on and the BLUETOOTH function is enabled. Bring this speaker system and the BLUETOOTH device closer together. Pair this speaker system and the BLUETOOTH device again.
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\140TBS.fm 010COV.book Page 54 Wednesday, November 25, 2020 3:33 PM wireless LAN device, other BLUETOOTH devices, or a microwave oven is nearby, move the device away from this speaker system. Remove any obstacle between this speaker system and the BLUETOOTH headphones, or move this speaker system away from the obstacle. Reposition the connected BLUETOOTH headphones.
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\140TBS.fm 010COV.book Page 55 Wednesday, November 25, 2020 3:33 PM [HIGH], [TEMP], and [ERROR] appear alternately for 2 seconds each in the front panel display, [STANDBY] appears in the front panel display, then the speaker system is turned off. High-temperature is detected in the speaker system. Press (power) to restart the speaker system. [BT TX] appears in the front panel display.
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\140TBS.fm 010COV.book Page 56 Wednesday, November 25, 2020 3:33 PM masterpage: Left Resetting the Speakers 1 Press and hold (power) on the bottom of the speaker for more than 10 seconds. The power indicator of the speaker flashes slowly in red and resetting starts. The power indicator of the speaker flashes in green and orange alternately when resetting is completed.
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\150OTH.fm 010COV.book Page 57 Wednesday, November 25, 2020 3:33 PM masterpage: Right Tweeter: 42 W (at 6 ohms, 10 kHz) Woofer: 42 W (at 6 ohms, 100 Hz) Additional Information Specifications Speakers (SA-FLA9/SAFRA9/SA-RLA9/SA-RRA9) The following descriptions are the specifications per speaker. Amplifier section U.S.
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\150OTH.fm 010COV.book Page 58 Wednesday, November 25, 2020 3:33 PM USB section (For update use only) (USB) port: Type A (For connecting USB memory) LAN section LAN(100) terminal 100BASE-TX Terminal Wireless LAN section Communication system IEEE 802.11 a/b/g/n/ac Frequency band 2.4 GHz, 5 GHz BLUETOOTH section Communication system BLUETOOTH Specification version 5.
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\150OTH.fm 010COV.book Page 59 Wednesday, November 25, 2020 3:33 PM masterpage: Right Supplied Accessories • Remote control (1) • R03 (size AAA) battery (2) • HDMI cable (4K, 8K transmission supported) (1) • TV center speaker mode cable (1) • AC adaptor (1) • AC power cord (mains lead) for the speaker (4) • Startup Guide • Operating Instructions (this document) Design and specifications are subject to change without notice.
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\150OTH.fm masterpage: Left 010COV.book Page 60 Wednesday, November 25, 2020 3:33 PM Supported Input Audio Formats Supported audio formats differ depending on the input setting of the speaker system. “” indicates the supported audio format and “–” indicates the unsupported audio format in the table below. Format HDMI input TV input (eARC) TV input (ARC) LPCM 2ch LPCM 5.1ch – LPCM 7.
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\150OTH.fm 010COV.book Page 61 Wednesday, November 25, 2020 3:33 PM On BLUETOOTH Communication • BLUETOOTH devices should be used within approximately 10 meters (33 feet) (unobstructed distance) of each other. The effective communication range may become shorter under the following conditions.
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\150OTH.fm 010COV.book Page 62 Wednesday, November 25, 2020 3:33 PM masterpage: Left COPYRIGHT END USER LICENSE AGREEMENT IMPORTANT: BEFORE USING THE SOFTWARE, PLEASE READ THIS END USER LICENSE AGREEMENT (“EULA”) CAREFULLY. BY USING THE SOFTWARE YOU ARE ACCEPTING THE TERMS OF THIS EULA. IF YOU DO NOT ACCEPT THE TERMS OF THIS EULA, YOU MAY NOT USE THE SOFTWARE. This EULA is a legal agreement between you and Sony Electronics Inc. (“SONY”).
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\150OTH.fm 010COV.book Page 63 Wednesday, November 25, 2020 3:33 PM The software, network services or other products other than SOFTWARE upon which the SOFTWARE’S performance depends might be interrupted or discontinued at the discretion of the suppliers (software suppliers, service suppliers, or SONY).
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\150OTH.fm 010COV.book Page 64 Wednesday, November 25, 2020 3:33 PM the SOFTWARE could lead to death, personal injury, or severe physical or environmental damage (“HIGH RISK ACTIVITIES”). SONY, each of the THIRDPARTY SUPPLIERS, and each of their respective affiliates specifically disclaim any express or implied warranty, duty or condition of fitness for HIGH RISK ACTIVITIES.
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\150OTH.fm 010COV.book Page 65 Wednesday, November 25, 2020 3:33 PM AUTOMATIC UPDATE FEATURE From time to time, SONY or the THIRDPARTY SUPPLIERS may automatically update or otherwise modify the SOFTWARE, including, but not limited to, for purposes of enhancement of security functions, error correction and improvement of functions, at such time as you interact with SONY’s or third parties’ servers, or otherwise.
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\150OTH.fm 010COV.book Page 66 Wednesday, November 25, 2020 3:33 PM UPGRADES/UPDATES OR BY ANY OTHER LEGALLY RECOGNIZABLE FORM OF NOTICE. If you do not agree to the amendment, you should promptly contact SONY for instructions. Your continued use of the SOFTWARE after the effective date of any such notice shall be deemed your agreement to be bound by such amendment.
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\150OTH.fm 010COV.book Page 67 Wednesday, November 25, 2020 3:33 PM • Do not place metal objects other than a TV around the speaker system. Wireless functions may be unstable. • If the speaker system is being used in combination with a TV, VCR, or tape deck, noise may result and picture quality may suffer. In such a case, place the speaker system away from the TV, VCR, or tape deck.
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\150OTH.fm 010COV.book Page 68 Wednesday, November 25, 2020 3:33 PM Copyrights and Trademarks This speaker system incorporates Dolby* Digital and the DTS** Digital Surround System. masterpage: Left certified by the developer to meet Apple performance. “BRAVIA” logo is a trademark of Sony Corporation. WALKMAN® and WALKMAN® logo are registered trademarks of Sony Corporation. * Manufactured under license from Dolby Laboratories.
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\150OTH.fm 010COV.book Page 69 Wednesday, November 25, 2020 3:33 PM **in comparison with SBC (Subband Coding) when the bitrate of 990 kbps (96/ 48 kHz) or 909 kbps (88.2/44.1 kHz) is selected masterpage: Right * Depending on the country and region, this function may not be available. All other trademarks are trademarks of their respective owners.
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\160COVIX.fm 010COV.
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\00COVHTA9UC2\170BCO_AC2_UC2.fm 170BCO_AC2_UC2.fm Page 98 Wednesday, November 25, 2020 2:50 PM masterpage: BCO The software of this system may be updated in the future. To find out details on any available updates, please visit the following URL. The software of this system may be updated in the future. To find out details on any available updates, please visit the following URL. The software of this system may be updated in the future.
