OPERATI N G M AN UAL Bluet oot h Enabled Hands- Fr ee Kit / Headset Version 3.
OVERVI EW This unit uses Bluetooth technology that allows wireless communications on devices such as cellular phones. This is designed to be a totally wireless hands-free car kit or a stand-alone wireless headset. This provides the user to operate a cellular phone inside the car while driving and can also be used anywhere by detaching the earpiece and becomes a stand-alone Bluetooth headset. The unit will work on all Bluetooth cellular phones provided that they respect the Bluetooth protocol. A.
C. OPERATI ON S Before use, the headset must be paired with the phone. Pairing is done only once. After being paired, the phone and the headset will be automatically connected anytime when the phone is used. (Please see Headset Operations for Popular Cell Phones section on page 4 for instructions.) D . I N STALLI N G TH E M I CROPH ON E 1. 2. 3. Put two (2) "AAA" Alkaline batteries in the wireless microphone. The negative polarity of the batteries must be in the spring side.
The headset volume control is digital and is combined with the multi-function button (8). Pressing it clockwise increases the volume. Counter-clockwise decreases it. Continuous pressing of the digital volume control can also rapidly set the volume. (Please refer to the Headset Operations for Popular Cell Phones section on page 4 for additional information.) During a communication, pick-up the earphone and adjust it’s volume (8). Replace the earphone on the base and adjust the speaker volume (10).
HEADSET OPERATIONS FOR POPULAR CELL PHONES Note 1: If your phone is not included on the following list of this manual, kindly refer to the manual of your phone. Note 2: Softwares and menus could be modified by the cell phone’s manufacturers without prior notice. If the manual does not match with your cell phone operations, kindly refer to the manual of your cell phone. Sony Ericsson T68/T68i a. Activating the Bluetooth b. Pairing to the Cellular Phone c. Answering/Receiving a Call d.
f. g. h. Rejecting a Call Setting the Volume Recording for Voice Dialing ………………………………………… ………………………………………… ………………………………………… 14 14 15 Nokia 8910i a. Activating the Bluetooth b. Pairing to the Cellular Phone c. Auto Accept Mode d. Answering/Receiving a Call e. Making a Call with the headset on f. Rejecting a Call g. Setting the Volume h.
USING WITH SONY ERICSSON T68/T68i a. ACTIVATING THE BLUETOOTH You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone and other Bluetooth devices. 1. Go the Menu Key by pressing the joystick. Scroll to Connect, YES. Select Bluetooth, YES. Select Options, YES. Operation mode, YES. On, YES. 2. Continue pressing NO, to exit. QUICK ACCESS: Press Menu followed by the sequence of numbers below.
Redialing For T68i R6 and R7, press the multi-function button twice. Call is automatically transferred on the headset. e. REJECTING A CALL For T68i R6 and R7, press the multi-function button twice to reject the incoming call. f. SETTING THE VOLUME The headset has a digital volume control and is combined with the multi-function button. Setting the volume can be done during calls only. 1. Press it clockwise to increase the volume. 2. Decreases the volume by pressing it counter-clockwise.
USING WITH SONY ERICSSON T39m a. ACTIVATING THE BLUETOOTH You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone and other Bluetooth devices. 1. Press the Menu Key. Scroll to Extras and press YES. Select Operation mode, YES. On, YES. 2. Continue pressing NO, to exit. QUICK ACCESS: Press Menu followed by the sequence of numbers below. Extras Bluetooth Operation mode T39m 5 6 4 b. PAIRING TO THE CELLULAR PHONE 1.
Continuous pressing of the digital volume control can rapidly set the volume. If the volume is too high, it can cause feedback (whistling sound), echo or background noise during calls on some cell phones. f. ACTIVATING THE VOICE DIALING Use your phone when recording for the voice dialing. Before voice dialing, you must first turn on the name dialing function and record your voice. To turn voice dialing on and record number types: 1. Press the Menu Key. Scroll to Settings, YES. Voice control, YES. 2.
d. MAKING A CALL with the headset on Normal dialing 1. Enter the contact number and press OK. Sound is automatically transferred to the headset. 2. Press the multi-function button to hang-up and terminate the call. Voice dialing Refer to step f and g for the procedure when activating and recording for voice dialing. 1. Press the multi-function button once to activate the voice dialing. Sound is automatically transferred to the headset. 2.
5. Go the Menu Key by pressing the joystick. Scroll to Connectivity, SELECT. Select Bluetooth, SELECT. 6. Scroll to My devices, SELECT. New device, ADD. The phone is now searching for pairable devices to be added. Select the device you want to pair with your cell phone. Press SELECT. 7. Enter “0000” as the passkey then press OK. If the pairing is successful, the alternating red/blue lights will stop. 8. Continue pressing to exit the menu key.
USING WITH NOKIA 6310/6310i a. ACTIVATING THE BLUETOOTH You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone and other Bluetooth devices. 1. Press the Menu button. Scroll to Bluetooth, SELECT. Press SELECT again. 2. Choose On, SELECT. An icon will appear on the upper left corner. 3. Press Back then Exit to exit the Menu. QUICK ACCESS: Press Menu followed by the sequence of numbers below. Bluetooth Select On Select 6310 10 1 1 1 6310i 11 1 1 1 b.
2. Press the multi-function button to hang-up and terminate the call. Note: If the call is terminated using the cellular phone, a tone will be heard on the headset indicating that the call has been terminated. Voice dialing Refer to step g for the procedure when recording for voice dialing. 1. Press the multi-function button once to activate the voice dialing. 2. A beep will then be heard on the headset prompting the user to say the name of the person to call. 3. Say the name.
5. Press Menu. Scroll to Bluetooth, SELECT and Search for audio accessories, SELECT. The phone is now scanning for Bluetooth devices. SELECT the headset. The phone will initiate connection with the headset. QUICK ACCESS (for step 5): Press Menu followed by the sequence of numbers below. Bluetooth Search for audio accessories 8910 10 2 6. Enter “0000” as the passcode then press OK. The volume level will be displayed. The phone is now connected with the headset. Press Back then Exit to exit the Menu. 7.
As you press the button, the volume level is simultaneously displayed on the cellular phone. Continuous pressing of the digital volume control can rapidly set the volume. If the volume is too high, it can cause feedback (whistling sound), echo or background noise during calls. Note: It is also possible to use the volume keys of the cellular phone to set the volume by pressing the multifunction button first. h. RECORDING FOR VOICE DIALING Use your phone when recording voice dialing. 1.
QUICK ACCESS: Press Menu followed by the sequence of numbers below. Connectivity Bluetooth View paired devices 8910i 10 1 4 d. Select Options ANSWERING/RECEIVING A CALL When the phone is receiving a call, a ring tone will be heard on the headset as well as on the phone. 1. Press the multi-function button down once to answer the call. 2. End the call by pressing the button again. Note: Cell phone buttons can also be used to answer a call but audio is still transferred to the headset. e.
1. 2. 3. b. Press the Menu button. Scroll to Connect., OPTIONS. A list of options will be displayed. Choose OPEN then press SELECT. Choose Bluetooth, OPTIONS. Choose OPEN, and press SELECT. Bluetooth OFF will be displayed. Press OPTIONS. Change, SELECT. Choose On, then press OK. Continue pressing Exit key to exit the Menu. PAIRING TO THE CELLULAR PHONE 1. Bring the cellular phone at about 20 cm from the headset. 2. Detach the headset from the holster/base. 3. Turn off the headset. 4.
4. Press the button again to terminate the call. Redialing Press quickly the multi-function button twice to redial the last number. f. REJECTING A CALL Press the multi-function button twice to reject the incoming call. g. SETTING THE VOLUME The headset has a digital volume control and is combined with the multi-function button. Setting the volume can be done during calls or every time a key is pressed on your cell phone. 1. Press it clockwise to increase the volume. 2.
c. ANSWERING/RECEIVING A CALL When the phone is receiving a call, a ring tone will be heard from the phone. 1. Press the multi-function button down once to answer the call. 2. End the call by pressing the button again. Note: Cell phone buttons can also be used to answer a call. To transfer the call to the headset, press the multi-function button once. d. MAKING A CALL with the headset on Normal dialing 1. Enter the contact number and send.
