3-867-100-11 CDMA PCS Telephone Operating Instructions ©1999 Sony Electronics Inc.
Before operating your portable dual band telephone, please read this manual thoroughly and retain it for future reference. If your usage includes in-vehicle operation, refer to the Installation/ Connections/Operation manual for the optional accessory kits. DISPOSAL OF LITHIUM ION BATTERY LITHIUM ION BATTERY. DISPOSE OF PROPERLY. You can return your unwanted lithium ion batteries to your nearest Sony Service Center or Factory Service Center.
Navigating .................................... 12 Jog Dial™ navigator ............... 12 Navigating keys ...................... 12 Menu map ................................ 13 List of menu items ....................... 14 Quick tips and features ............... 16 First things first ............................ 18 Selecting a language ............... 18 Getting your phone number .. 18 Alphanumeric table ................ 19 Making & Receiving Calls Calling fundamentals .................. 20 Basic calling .
Unpacking Your Phone Carefully unpack your phone and check the contents using this list. If something is missing, please contact your nearest Sony dealer.
Getting Started Looking at Your Phone For more information, refer to the page numbers in parentheses ( ). 1 Antenna (18) 1 2 Red/Green LED (XX) Alerts for incoming calls/messages and identifies charging status. 2 3 3 Earpiece 4 4 Jog Dial™ navigator (14) Turn (scroll) and press (select) to access menus and settings. 5 5 Display (14) 6 Ringer speaker 7 SEND 6 7 key (21 to 23) Press to make or receive calls. 8 key (78) SEND 8 9 Press to access messages.
Charging the Battery A new battery is not fully charged so it’s best to charge the battery before using the phone. The following instructions show you how to attach/detach the battery and connect the supplied travel adapter. To attach the battery 1 Hook the battery onto the bottom of the phone 1, then lower the top down 2. 2 1 2 Press down firmly on the thumb indent to secure the battery in place. To remove the battery 1 Place your thumb on the battery release tab and press upward.
Connect the travel adapter to the phone connector 1, then plug it into a standard 120V AC outlet 2. Charging time is about 5 hours. Charging will take longer if the phone is turned on.
Battery life Standard battery CDMA mode Standby mode Talk time Analog mode 72.0 hours 14.0 hours 3.0 hours 1.5 hours Extended battery CDMA mode Standby mode Talk time Analog mode 144.0 hours 28.0 hours 6.0 hours 3.0 hours Battery condition The battery icon indicates the approximate charge level remaining in the battery. Energy consumption varies depending on conditions of use (including ambient temperature, network coverage and usage patterns).
Getting Started Turning the Phone On Extending and retracting the antenna LED Extend the antenna to maximize signal strength and minimize interference. When you make or receive a call, hold the end of the antenna and pull up until fully extended. When you are not in a call, push the antenna down until fully retracted. Powering on To turn your phone on, hold down PWR for about two seconds. Powering On appears on the screen, the LED flashes green, the phone beeps and searches for a signal.
1 23456 7 888 8 1 Short character display 4 Identifies the display based on the current operation. • Features menus/submenus begin with “F”. • Calls List memory locations begin with “C”. • Phone Book memory locations are all digits. 2 (in-use) / (out-of-service) icon (18, 21, 23, 71) Indicates within or outside a service area. A phone icon ( ) appears during a call. A slash through it ( ) appears when no signal is received, which means you cannot make or receive calls.
Getting Started Activating Your Phone First time activation In order to make and receive calls, you need to establish telephone service from a service provider. Many companies provide service. Choose a service provider that will meet your calling needs. Self-activating your phone Some service providers have a service feature called OTASP (Over-TheAir Service Provisioning) which allows you to self-activate your phone with a new service. Your phone supports this service feature.
Navigating Jog Dial navigator: scroll and select Your Sony portable phone is easy to use thanks to the Jog Dial navigator. The instructions in this manual will tell you to “scroll and select”. To scroll, turn Jog Dial up or down. When the flashing arrow points to the item you want to select, push Jog Dial in toward the phone.
List -1212 s te mber Tone There are three navigation routes from the standby display: 1 Turn Jog Dial in either direction to access numbers saved in memory. 2 Press Jog Dial to access the Features menu. 3 Enter a digits. To see the complete list of menus, submenus and corresponding settings, see the “Menu list” on pages 12 and 13.
List of Menu Items The Features menu allows you to personalize the way your phone functions. This menu list shows the entire Features menu (a.k.a. long menu). The Features menu includes seven categories of menus. Within each of these menus are submenus identified by a “menu item number” (they begin with the letter “F” (Features) followed by two digits). Menu item numbers allow you to quickly access any menu from the Features menu (for example, to access the earpiece volume menu press 1 4 ).
Settings Page F41 Keyguard — F42 Touch Dial F43 Auto-Retry on / off 57 off / on 10 sec / on 30 sec / on 60 sec 57 56 F44 Auto-Answer on / off 58 F45 AnyKey Answ on / off 58 F45 Recv.
Quick Tips and Features Here is a list of your phone’s features which simplify your calling experience. MAKING CALLS Calling displayed phone numbers • Push SEND to call a phone number anytime it’s displayed on the screen. Speed dialing • Your phone is able to speed dial phone numbers stored in your Phone Book: Enter the memory location number and press [send].
AnyKey Answer • You can set your phone to answer incoming calls with any key except PWR Setting your phone to answer calls automatically • A Hands-Free Car Kit ia a handy accessories that allows you to set your phone to answer calls automatically on the second ring. Muting the ringer • Quickly mute the ringer by turning Jog Dial down or pressing the [end] key. .
PHONE FEATURES and FUNCTIONS Navigating • Quick menu access Each menu item can be accessed quickly from the standby display by pushing Jog Dial, entering the menu item number, then pressing Jog Dial again. • Previous menu Press [clr] to quickly go back to the previous menu. • Return to standby Press [end] or hold down [clr] to quickly return to standby. The display automatically returns to standby after 30 seconds of inactivity.
• Turn Jog Dial up or down to quickly adjust the earpiece volume during a call. • Turn Jog Dial up or down to quickly adjust the ringer volume while the phone is ringing. • Turn Jog Dial down or press [end] when the phone is ringing to mute the ringer. • Press and hold Jog Dial to mute the microphone during a call. Locking the keypad • Push and hold Jog Dial to quickly lock the keypad. Keyguard vs lock phone vs limit calls • You can lock the keypad even when the phone itself is locked.
First Things First Selecting a language When you receive your phone, the menus are displayed in English, but you can change the menu language. To change the menu language, follow the instructions below. 1 From the Features menu, scroll and select Display. 2 Scroll and select Language. 3 Scroll and select English, French, Spanish or Portuguese. Getting your phone number Your phone number has its own submenu; just in case you forget it. 1 From the Directory menu, scroll and select My Number.
Key 1 2 ABC 3DEF 4GHI 5JKL 6MNO 7PQ RS 8TUV 9 WX YZ 0OPER English Sequence A D G J M P T W 0 “ B E H K N Q U X . C F I L O R V Y ‘ a d g j m S t Z , b e h k n p u w & c f i l o q v x ( 2 3 4 5 6 r 8 y ) : 1 s 7 z 9 Alphanumeric tables for other languages To view another language table, refer to the respective phone operating instructions. Not all areas distribute the phone operating instructions in all languages.
Calling Fundamentals You can call any number up to 32 digits when you are within a service area. If you are outside a service area, appears on the display. There are several ways to make calls, including dialing manually, speed dialing, touch dialing or recalling a stored number. Basic calling The most basic way to call any phone number is to dial it manually. 1 Enter a phone number on the standby display and press SEND . The phone dials the number and the icon appears.
Limit calls is a function that allows you to control calls that can be made from your phone. You can limit outgoing calls to specific segments of your Phone Book, while leaving incoming calls unaffected. Both limit calls and lock phone allow you to call 911 and your three stored emergency numbers. This function simply limits your outgoing calls whereas, locking your phone restricts your entire phone. Setting Limitation Off To incoming No limitation; calls can be made to any number.
Calling From the Phone Book Your phone has an internal Phone Book. Once you create entries in your Phone Book (see the Phone Book section), dial stored numbers quickly by selecting an entry, speed dialing, touch dialing or fast 4 dialing. Note If the Phone Book entry includes a pause or link, push Jog Dial to release the remaining numbers. Selecting a Phone Book entry manually 1 From standby, scroll and select Saved #s. 2 Scroll and select Phone Book.
Fast four-digit dialing (fast 4 dial) 1 From the Extras menu, scroll and select Fast 4 Dial. 2 Scroll and select on or off. Once you’ve turned fast 4 dial on, you can dial using this feature: 1 From standby, enter the last four digits of the phone number you want to call, then press SEND . The phone searches your entire Phone Book for those exact digits. Automatic dial If only one Phone Book entry matches, the phone automatically dials it for you.
Calling From the Calls List The Calls List is a chronological history the phone keeps of your ten most recent calls (outgoing, incoming, missed, fax calls or data calls) and scratch pad entries. If you call the same number twice in a row, only the most recent call is stored.
Incoming Calls You can receive calls as long as the icon is not displayed. When you receive a call, the ringer sounds and the LED flashes green with each ring. Incoming Call flashes on your phone’s display. 1 Press SEND to answer the call. When the call is connected, the call timer appears. 2 Press END to disconnect the call. The icon disappears and the final elapsed call time flashes for 10 seconds.
Setting the phone to answer automatically When the phone is used with a Sony Hands-Free Car Kit, it can automatically answer calls on the second ring. 1 2 From the Extras menu, scroll and select Auto-Answer. Scroll and select on or off. If you select on and the phone is in the hands-free car kit, the message –AutoAnswer– is displayed on the standby display.
Storing Information Your phone has an internal Phone Book for up to 199 entries (each with its own memory location number). Phone Book entries can be numbers up to 32 digits (phone, credit card, medical record, etc.) and corresponding names up to 12 characters. Things to keep in mind when creating your Phone Book: • It’s a good idea to use the first nine memory locations for numbers you call most often. • Consider whether you want to use last names first since it will affect searching your Phone Book.
Special storage functions Hyphens, pauses and links are special functions that can be stored in your Phone Book entries. Hyphens in Phone Book entries Your phone has a default setting of autohyphenation ON. When you enter digits, the phone assumes you are entering a standard U.S. phone number (such as 800-555-1234). Every fourth and eight character is a hyphen. To enter hyphens manually (to store a foreign phone number or other type of number), turn autohyphenation OFF (see page 68).
Linking Phone Book entries Use the link function if the combined phone number and corresponding DTMF signals exceed 32 digits. 555-1234L50 is an example of calling 555-1234, then linking the number in memory location 50 (i.e., your medical record number). 1 Enter all digits to be dialed prior to the hyphen, pause or link, then push Jog Dial. 2 Scroll and select enter hyphen, hard pause, time pause or enter link.
Searching the Phone Book Information stored in your Phone Book is sorted either alphabetically (the first character of the memory location) or numerically by memory location number. So, one way to search your Phone Book is to simply scroll using the Jog Dial. No matter how your Phone Book is sorted, you can find information quickly by searching alphabetically, by memory location or phone number. Once a Phone Book entry is displayed, you can call it by pressing SEND or Jog Dial twice.
Searching by memory location number You can search for a memory location number in your Phone Book from standby mode or the Directory menu. From standby mode 1 Enter a memory location, then push Jog Dial. From the Directory menu 1 Scroll and select Phone Book. A message prompts you for a memory location. Scroll and select Recall Loc#. 2 A message appears if the memory location is empty. Enter a memory location, then push Jog Dial. A message appears if the memory location is empty.
Editing Phone Book Entries You can edit the name, phone number and memory location of entries stored in your Phone Book. If the selected Phone Book entry is restricted, you must enter a four-digit lock code to edit it. You can edit Phone Book entries from standby mode or the Directory menu. From standby mode From the Directory menu 1 1 2 3 Scroll down twice to access your Phone Book. Scroll to the Phone Book entry you want to edit, then push Jog Dial. 2 Scroll and select Edit.
Erasing Phone Book Entries If the selected Phone Book entry is restricted, you must enter a four-digit lock code before you can erase it. You can erase Phone Book entries from the standby display or from the Directory menu. You can erase them one at a time, or erase your entire Phone Book. From standby mode 1 Scroll down twice to access your Phone Book. From the Directory menu 1 Scroll and select Erase. 2 Scroll to the Phone Book entry you want to erase, then push Jog Dial.
Restricting Phone Book Entries You can restrict access to individual Phone Book entries or your entire Phone Book. Restricted entries display the message Phone Book entry restricted in place of the phone number. A lock code is required to view restricted numbers. If a restricted Phone Book entry is added to your Calls List, it’s also restricted in your Calls List. To restrict Phone Book entries From the Phone Book 1 Scroll to the Phone Book entry you want to restrict, then push Jog Dial.
Sounds Menu Settings The Sounds menu allows you to adjust the volume of the ringer, keybeep and earpiece. You can also select the type of sounds heard when the phone rings and when you press keys. Accessing the Sounds menu F-1 F11 FEATURES Sounds Timers Directory SOUNDS Ringer Vol Mute/Unmute Keybeep Vol From Features, press Jog Dial to access the Sounds menu. Sounds menu My Phone 12:34P 12/25 :Saved #s :Features From standby, press Jog Dial to access the Features menu.
Ringer type 1 2 Scroll and select Ringer Type. Scroll and select the ringer type. You can select from ten different ringer settings. You can choose from five types of rings and five melodies. The ringer sounds every time you turn Jog Dial. Message ringer You can choose to be alerted when you receive new messages. See the section regarding carrier provided features. Earpiece and microphone speakers Earpiece volume This menu sets the earpiece volume.
Keybeeps Keybeeps are the sounds made by your phone’s keys. Keybeep type This menu sets the sound to a click or tone (similar to DTMF tones). This setting does not affect DTMF tones sent to the other party. 1 Scroll and select Key Sound. 2 Scroll and select tones or clicks. Keybeep volume 1 2 Scroll and select Keybeep Vol. Scroll and select off, low, med. or high. Keybeep length 1 Scroll and select Beep Length. 2 Scroll and select standard or long.
Display Menu Settings You can use the features on the Display menu to change the appearance of the on-screen display. See page 20 for information regarding the Language selection menu. Accessing the Display menu My Phone 12:34P 12/25 :Saved #s :Features F-6 F61 FEATURES Security Display Network DISPLAY Banner Backlight Auto-Hyphen From Features, scroll and select Display. From standby, press Jog Dial to access the Features menu.
Setting autohyphenation If autohyphenation is on, the phone assumes you’re entering a U.S. phone number and enters a hyphen in the fourth and eighth spaces (e.g., North American Numbering Plan: eleven digits including a long distance identifier, three-digit area code, three-digit community code and four-digit location code, e.g., 999-999-9999). 1 2 Scroll and select Auto-Hyphen. Scroll and select on or off.
Security Menu Settings You can restrict access to your phone, reset to the default menu settings and store emergency numbers. You must enter a four-digit lock code to access the Security menu. A typical default lock code is either the last four digits of your phone number or 0000. Access to the Security menu My Phone 12:34P 12/25 :Saved #s :Features F-5 F51 FEATURES Security Display Network SECURITY Lock Phone New Code Restrict # From Features, scroll and select Security, then enter the lock code.
Reverting to default settings Reverting to the default settings does not affect Phone Book or Calls List entries. 1 Scroll and select Master Reset. 2 to revert to the factory defaults or push Jog Dial Press 1 to keep the current settings. Storing emergency numbers You can store up to three emergency numbers other than 911 (which you cannot erase). 1 Scroll and select Emergency #. The first Emergency # display appears. 2 Scroll and select Emergency #1, Emergency #2 or Emergency #3.
Network Menu Settings You can set the phone to alert you when something happens to your network (roaming status change, call is dropped, enhanced voice privacy is lost). You can also activate/switch NAMs. Accessing the Network menu My Phone 12:34P 12/25 :Saved #s :Features From standby, press Jog Dial to access the Features menu. F-7 F71 FEATURES Security Display Network NETWORK Roam Alert Drop Alert Priv. Alert From Features, scroll and select Network.
Setting the roaming alert “Roaming” is when you use your phone outside of the home service area or other valid service areas. Roaming access to a different carrier and the types of calls you can make varies with the agreement between your “home” carrier and the current serving carrier. Check with your service provider for details. 1 Scroll and select Roam Alert. 2 Scroll and select on or off. Your phone alerts you when you enter or leave valid service areas.
NAMS NAMs are phone identifier numbers associated specifically with your phone. For example, your phone may have both a business phone number and also a personal phone number. You can store up to two NAM’s (Number Assignment Modules) on your phone. To add or remove NAMs, contact your service provider who will change the NAMs for you.
Extras Menu Settings On the Extras menu, you can set the phone to enable touch dialing, redial automatically and answer incoming calls automatically or at the press of any key. You can also use this menu to lock the keypad and to jot down phone numbers. Accessing the Extras menu F-4 F41 FEATURES Directory Extras Security EXTRAS Key Guard Touch Dial Auto-Retry From Features, scroll and select Extras.
Checking and Setting the Timers You can check call durations on the Timers menu. You can also set the phone to alert you every minute of a call and make the phone turn itself off automatically. Accessing the Timers menu My Phone 12:34P 12/25 :Saved #s :Features F-2 F21 FEATURES Sounds Timers Directory TIMERS All Calls RecentCalls MinuteAlert Timers menu From Features, scroll and select Timers. From standby, press Jog Dial to access the Features menu.
Setting the minute alert You can set the phone to sound an alert to help you monitor the length of your calls. 1 Scroll and select Minute Alert. 2 Scroll and select before min., each min., every 5 min. or off. Setting the phone to turn off automatically You can set the phone to automatically turn itself off. But, it will not turn itself off during a call. Once the phone turns off, the setting reverts to never. The countdown timer 1 Scroll and select Auto-Off.
Short Messaging Service Your phone is capable of many functions. However, some of these functions are dependent upon your service provider being able to support them. Check with your service provider to see which functions are supported in your area. One function, Short Messaging Service (SMS), allows you receive messages and store them in your phone’s memory. Receiving messages Your phone is able to receive three different types of messages text, voicemail and pages.
The LED The LED alerts you that new messages have been received: When the message is LED Non-urgent Urgent Unread Flashes green (quickly) Blinks red Remains lit (green or red) until the message is read or for 15 minutes. Clearing the message notification To clear the notification, press Jog Dial or any key (except PWR ). Message storage capacity Text messages and pages A text message can be between 1 and 200 characters long. You can store approximately 7 large messages or 22 small messages.
Message format Text messages received by your phone are just strings of characters. To make message reading easier, you can set your phone to format the text using one of the following settings: Setting How message is displayed How text is affected none Exactly as received partial Long lines of text are wrapped without improper word breaks Long lines of text are wrapped. Extra spaces and lines are removed.
Text messages A hollow box ( ) indicates the end of the message. If you do not scroll, the display automatically scrolls down for you. After reading your text messages, protect or erase them. To read new text messages 1 Scroll and select New Text. The first message is displayed. If there are no new messages, a display appears. Push Jog Dial to return to the Messages display. 2 Scroll through the message. To view the next message, push Jog Dial when you reach the end of the message.
To save the callback number 1 2 After reading a message, push Jog Dial. Scroll and select Save Number. The phone prompts you for a name to accompany the number. 3 Use the keypad to enter the name, then push Jog Dial to store the phone number and name. The phone prompts you to confirm the save. 4 Push Jog Dial to store the new number in the first available memory location. If you want to store it in another location, scroll to the desired location, then push Jog Dial.
Sending and Receiving Data You are able to use your phone to send and receive electronic data (such as e-mail, faxes and WWW). Your phone can be set to convert digital signals (which are used by computers) to analog signals (which are used in telephone communication). This function enables your phone to act as a modem allowing it to send and receive computer communications. However, this capability is dependent upon your service provider being able to support it.
Unwired planet As discussed on the previous page, your phone can be set to act as a modem for your computer allowing it to send and receive electronic data. However, with unwired planet, your phone can actually bypass the computer component as well! Just think, send and receive computer communications such as e-mail, fax and WWW using just your phone! Unwired planet relies on satellite signals to send and receive electronic data directly to your phone’s display.
Troubleshooting Problem Possible solutions Page • The phone is off. Turn the phone on. 18 • Battery is fully discharged. Recharge the battery. 16 • Battery may not be completely attached. 15 Securely attach the battery. Out-of Service • The phone is outside the service area or the 18 icon ( ) appears. signal is too weak. Extend the antenna fully. • Check NAM settings on the Network menu. 74 If you set “Auto-NAM” to “off” and you are using two NAM’s, the phone may be ignoring an available service.
Specifications Frequency range CDMA FM Transmit (MHz) 1851.25 to 1908.75 824.04 to 848.97 Receive (MHz) 1931.25 to 1988.75 869.04 to 893.97 Dimensions (h/w/d) 5.4 x 1.6 x 1.0 inches (146 x 50 x 37 mm) (not including antenna) Mass (weight) Approx. 5 oz (218 g) (including battery) RF power output CDMA FM Operational temperature –22°F to +140°F (–30°C to +60°C) (excluding battery) Supplied accessories QN-400BPL2 Extended Life Lithium-Ion Battery (1) QN-301TA Travel Adapter (1) 0.
Optional Accessories Call 1-800-447-8030 or visit our website to order additional accessories (USA only).
Rules and Regulations The U.S. Federal Communications Commission and the Industry Canada regulate cellular/PCS telephone service in their respective countries. It is important for you, the cellular/PCS telephone user, to observe the applicable regulations when operating your cellular/PCS telephone in either country. In addition to these U.S.
Safety Precautions For safe and efficient operation of your phone, observe these guidelines. Your dual band (analog/digital CDMA) hand-held portable cellular/ PCS telephone uses both analog frequency modulation (FM) technology and digital Code Division Multiple Access (CDMA) technology. CDMA is a newer radio frequency (RF) technology than the FM technology that has been used for radio communications for decades. Your dual band portable cellular/ PCS telephone is a radio transmitter and receiver.
Heat and sunlight exposure Avoid leaving your cellular/PCS phone exposed to direct sunlight or extreme heat. Extended exposure to heat and sunlight may damage the components of your cellular/ PCS phone. Antenna care and replacement Do not use the phone with a damaged antenna. If a damaged antenna comes into contact with the skin, a minor burn may result. Replace a damaged antenna immediately. Take your phone to an authorized service center for repair. Use only the supplied or approved antenna.
Children Do not allow children to play with your phone. It is not a toy. Children could hurt themselves or others (by poking themselves or others in the eye with the antenna, for example). Children also could damage the phone or make calls that increase your telephone bill. Blasting areas To avoid interfering with blasting operations, turn your unit OFF when in a “blasting area” or in areas posted: “Turn off two-way radio.” Construction crews often use remote control RF devices to set off explosives.
Glossary Alphanumeric table DTMF Allows you to enter characters on your phone’s display. Dual Tone Multiple Frequency, also known as “touch-tone”. Tone generated when you press a telephone key (number, or #). * Can be used to access answering machines, pagers, telephone banking services, data services and other electronic services. AnyKey Answer Allows you to answer your incoming calls with any key except power. Autohyphenation Automatically hyphens the phone number as you enter the digits.
NAM, automatic Roam Feature that automatically selects an available NAM that matches the current serving system (carrier). Your phone is roaming when you use it outside of the home area. Availability of roaming access to a different carrier and types of calls you can make varies with the agreement between your home carrier and serving carrier. Check with your carrier for details about roaming in a specific area. NAM, multiple registration Registering your phone in more than one carrier.
Index A C AC adapter 10, 16 Accessories, optional 54 Adjusting volume Earpiece 18 Ringer 21 Alerts Analog roam 41 Drop 42 Minute 47 Privacy 42 Alphanumeric table 16 Antenna 7, 10 Any Key Answer.
D E Dialing.
I M Incoming call 23 Icon Battery 11 Digital 11 In-use 10, 11, 21, 23 Message 11 Roam 11 Out-of service 10, 11 Signal strength 10, 11 J Jog Dial 19 K Key, arrow/* 7 Key, arrow/# 7 Key, clear 7 Key, end 7 Key, message 7 Key, number 7 Key, power 7 Key, send 7 Keybeep Length 35 Type 35 Volume 22 Keyguard 56 Keypad lock icon 56 L Language selection 20 Laws Rules and regulations 3 Limit calls 20 Link 27 List of menu items 15 Lock code 39 Locking the keypad 44 Locking your phone 38 68 SB200 57-76 index 6
N R NAM (Number Assignment Module), switching Automatically 70, 74 Manually 42 Number keys 21, 25 O Out-of-service icon 18, 21, 23, 71 Over-the-Air Service Provisioning (OTASP) 7 Overflow digits 37 P Pause 27 Phone Book 25, 31, 33, 48 Calling 21 Deleting 29 Limiting calls 22 Restricting/unrestricting 32 Phone number, yours 17 Power Turning off 10, 18, 47 Turning on 10, 18 Prefixing 22 Privacy alert 42 Receiving Calls 23 text messages 77 Voice mail 83 Recent number memory Calling recent numbers 36 Clear
S Safety precautions 55 Saving Emergency numbers 39 To the Phone Book 25 Scratch pad 59 Scrolling Menus 19 Message 79, 80 Message list 80 Searching Alphabetically 28 By memory location 29 For a message 80 For a name 52 For a phone number 33-35 Security code. See Security functions Security functions Accessing 60 Clearing call memory 64 Emergency numbers 65 Lock phone 60 New lock code 61 Restriction 62, 63 Sending.
CELLULAR/PCS TELEPHONE CELLULAR/PCS TELEPHONE ACCESSORIES S LIMITED WARRANTY SONY ELECTRONICS INC. (“SONY”) warrants this Product and its accessories against defects in material or workmanship as follows: 1. PRODUCTS: For a period of one (1) year from the date of purchase, SONY will, at its option, either pay the parts and labor charges to any SONY authorized Cellular/PCS telephone service facility to repair or replace the defective Product (with new or rebuilt replacements).
For your convenience, SONY ELECTRONICS INC. has established telephone numbers for product information regarding CELLULAR/PCS telephones. Please call: SONY WIRELESS HOTLINE 1-800-578-SONY (7669) or write to: SONY Customer Information Center One Sony Drive Park Ridge, New Jersey 07656-8003 For an accessory or part not available from your authorized dealer, call: 1-800-488-SONY (7669) or 1-816-891-2553 72 SB200 57-76 index FOR WARRANTY INFORMATION ON YOUR PURCHASE, PLEASE SEE REVERSE SIDE.
3-xxx-xxx-xx 80-xxxxx-x Quick Reference Card CM-SB200 Sony Electronics Inc.
Memory Phone Book Storing 1 Enter a phone number, then push 2 Scroll & select Save 3 Enter a name, then push twice Calling Touch Dial Enter the memory location # and hold down the last digit Speed Dial Enter the memory location #, press SEND Fast 4 Dial Enter the last 4 digits of an entry, press Manually Scroll/select an entry, then push SEND twice Searching Quick Press the key that corresponds with the Alphabetic first letter of the name you want to find Find Name 1 Turn – 2 Push down to a
Additional Information 75 SB200 57-76 index 75 4/9/99, 2:22 PM
SONY Wireless Hotline Number (USA only) If you have any questions or comments, please call: SONY WIRELESS HOTLINE 1-800-578-SONY (7669) Visit our website at www.sony.