User s Manual for Cordless Telephone Fold open this manual for information about this telephone s installation. Please read the important Safety instructions included in your package.
IMPORTANT SAFETY INSTRUCTIONS BEFORE USING YOUR TELEPHONE EQUIPMENT, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND INJURY TO PERSONS, INCLUDING THE FOLLOWING: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall telephone jack and power outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use damp cloth for cleaning. 4.
©. If the product has been exposed to rain or water. d.1f the product does nut operate normally and proper operating instructions have been followed, adjust only those controls that are covered by the operating instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation. @. lf the product has been dropped or cabinet has be damaged. f.
SAFETY INSTRUCTIONS FOR BATTERIES CAUTION : To reduce the risk of fire or personal injury, read and follow these instructions 1. Use only a Southwestern Bell Freedom Phone :approved battery pack in the handset of your cordless 2. telephone. FOR HANDSET UNIT. 3N-BU0AAAL 3.8V 550mAh JAIL Co., Lid or GPEOAAASIBMX 3.6V 550mA CG PI INTERNATIONAL LIMITED. 2. Do not dispose of the battery in a fire, as it may explode. Check with local codes for possible special disposal instructions, 3.
FCC WANTS YOU TO KNOW This equipment complies with Part 68 of the FCC rules. On the bottom of the base of this equipment is a {able that contains, among other information, the FCC Registration Number, Ringer Equivalence number {REN} and the Universal Service Order Code (USO, which is RJ-11C, for this equipment. You must, upon request, provide this information to your telephone company.
more of the following measures: C Reorient or relocate the receiving antenna increase the separation between the equipment and receiver. [Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
LIMITED WARRANTY This Southwestern Bell Freedom Phone: Is warranted ta the original purchaser to be free from defects in materials and workmanship under normal installation, use and service for a period of one (1) year from the date of purchase as shown on the purchaser s receipt.
OF THISORANYOTHERWARRANTY.EXPRESSEDORIMP LIED WHATSOEVER.
OPERATION 50-Channel Operation The GH2400M cordless telephone automatically searches and selects the clearest of 50 channels when iris being used. Voice Scramble The GH2400M protects your privacy by encoding the voice signal between the handset and base unit when you make of receive calls.
b. Move closer fo base Noe: You must be in usable range to change channels. Base antenna should be in upright position Receiving a Call 1. IF THE HANDSET I$ OUT OF THE BASE UNIT, press TALK or any button on the keypad. 2. IF THE HANDSET IS IN THE BASE UNIT, lift the handset. Do not press TALK. You automatically be connected Ending a Call 1. Place the handset in the base or press TALK to be disconnected from the line. 3. TALK LED on handset will turn off.
INSTALLATION CAUTION 1. Never install a telephone during & lightning storm. 2. Never install a telephone in a wet location. 3. Ever touch insulated telephone wires or terminals . 4. Use caution when installing 2 telephone line, 120 Volt Outlet / Telephone Jack 1. This phone requires a modular phone jack (RJ11) and a standard 120 volt outlet 2. Lug phone directly into outlet. 3. Do not plug other appliances into outlet or have outlet controlled by a wall switch.
until it is securely in place. 2. Insert AC adapter into back of base unit 3. Insert one end of short line cord into back of base unit, passing line cord through the groove. 4. Plug other end of line cord into modular jack. 5. Mount base on wall plate studs and gently press until the unit locks in place. 8. Plug AC adapter directly into standard 120 volt outlet. Desk Top Installation 1.
Ringer On/ Off Set switch {left side of handset) to ON or OFF. Ringer switch must be ON for handset ta ring during incoming calls, GFF ON POWER iE OFF ON RING Receiver Volume Control Adjust the receiver volume form low to high Handset Battery Charging The battery pack in the handset must be fully charged 10-14 hours before using the telephone for the first time. 1. Place handset in base. The CHARGE LED on base will light 2. After batteries are fully charged, check for dial tone by pressing TALK on handset.
1. Charging contact 2. Page button 3. In-use lighting 4. Charging Lighting 5. Antenna 6. Tone/Pulse switch 7. Modular Jack 8. DC Jack Dual Charge (Desk installation Only) The GH2400M is specially designed with a dual charge feature. The battery pack will charge whether the handset is placed on the base facing up OR facing into the base. Replace battery every 2 years. Use only a Southwestern Bell Freedom Phone approved Ni-MG battery in your cordless phone.
Page / Handset Locator Send a signal from the base to handset dress PAGE button on base and a series of rings will sound from handset. To Inc ate the handset (it f is away from the base), press and hold PAGE button. press any key on keypad (including TALK) to cane! the page. Memory Feature Store up to 10 numbers in memory for quick dialing. Ta Program Frequently Called Numbers 1. Pick up handset, with TALK off. 2 Press MEMO {Memory} button. 3. Dial phone number {up to 18 digits). 4. Press MEMO button again.
. TALK BUTTON : Lights to indicated line is in use. . Receiving Volume Control : Adjust Listening level from Norm to High. 3. Temporary Tone(*) Button : Press to temporarily change the dialing mode from pulse to lone. 4. REDIAL Button : press to redial the last number you called or inset a 4 seconds pause into the speed dialing of telephone numbers. . Ringer On/Off: set the phone to RINGER ON or RINGER OFF. 8.
Headset Jack You can connect a handset(not included) for hands-free conversations. 1. Inset the headset's plug (must be 3/32 inchworm type) into the headset jack on the side of the handset. . Attach the belt clip to the back of the handset and the desired location on your clothing. . Adjust the microphone to a comfortable position, placing it near your mouth. . Use the TALK button to make or receive a call. a sown To remove the belt clip from the back of the handset, press and slide down the heft clip.
TROUBLESHOOTING if you experience difficulty operating your cordless phone, try the suggestions below. If the trouble persists, call the Southwestern Bell Freedom Phone Retail Sales Toll Free Hal Line at 1-800-366-0037, Monday Friday between the hours of 8:30 p.m. (EST), or visit our web site at pith //www swhfreedomphone com. The unit will not operate / no dial tone: 1 Make sure TALK LED is fit ~ Make sure AC adapter is plugged into base unit and wall outlet.
: Move closer to base and try again If moving closer doesn’t work, you may have lost security code. Reset code by placing handset back on base for 5-10 seconds. {See Security Code section} i. Make sure you have selected correct dialing mode, tone or pulse. Make sure AC adapter is not plugged into wall outlet with other appliances. Disconnect for 5-10 seconds then reconnect. Place handset back on base and then fireplug AC adapter. ) Make sure handset battery is fully charged.
STIR don't take unit back to the store.