THIS DOCUMENT CONTAINS INFORMATION THAT IS SUBJECT TO CHANGE WITHOUT NOTICE. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including but not limited to photocopying, recording, information retrieval systems, or computer network without the written permission of Sonos, Inc. Sonos and all other Sonos product names and slogans are trademarks or registered trademarks of Sonos, Inc. Sonos Reg. U.S. Pat. & Tm. Off.
Sonos PLAYBASE The PLAYBASE adds full-theater sound to all your movies, TV shows, sports and games—and wirelessly streams your favorite music, too. • • • • • Slim tabletop design practically disappears under your TV. Simple two-cord setup—one for power, one for your TV. Connects wirelessly to Sonos speakers in your other rooms to create a whole home sound system. Syncs wirelessly with SUB and two Sonos speakers, such as two PLAY5s, for 5.1 surround sound. Securely supports TVs up to 75 lbs (34 kg).
2 Product Guide • If your modem isn’t a modem/router combination and you want to take advantage of Sonos’ automatic online updates or use a streaming music service, you’ll need to install a wireless router before setting up Sonos. Note: Sonos communicates over a 2.4GHz home network supporting 802.11 b/g/n wireless technology. 802.11n only network configurations are not supported—you can either change the router settings to 802.11 b/g/n or connect a Sonos product to your router.
3 Sonos PLAYBASE PLAYBASE front Volume Down Play/Pause Volume Up Swipe right for next track (when applicable) Swipe left for next track (when applicable) Touch Controls On/Off Your Sonos system is designed to stay on; when you’re not using it, Sonos uses minimal electricity. • To quickly stop the music everywhere, open the Sonos app, go to the Now Playing screen, and tap Pause. • To stop the audio in just one room, you can touch the Play/Pause button on the speaker.
4 Product Guide PLAYBASE back Join button Ethernet port AC power (mains) Digital Audio in (optical) Ethernet Port You can use an Ethernet cable to connect the PLAYBASE to your home network. You should only use this port to plug in either the PLAYBASE or a Sonos BRIDGE or BOOST. Digital Audio In (Optical) Use an audio optical cable (supplied) to connect the Sonos PLAYBASE’s digital audio input to the optical digital output on your television. • Take care not to bend or twist the cable.
5 Sonos PLAYBASE TV placement guidelines The PLAYBASE can be placed either under your TV or on a shelf. Under TV with single foot stand Under TV with split foot stand On a TV cabinet shelf •Lift the TV and put PLAYBASE under it with the Sonos logo facing front. •PLAYBASE accommodates most TVs with separate feet near the edges of the screen. It will fit securely between the feet, below the screen.
6 Product Guide Set it up PLAYBASE is compatible with Sonos software versions 7.2 and later. If you are adding the PLAYBASE to an existing Sonos system, be sure to check for software updates before adding the PLAYBASE. 1. Carefully unpack the box. 2. Choose a location for the PLAYBASE (refer to the TV placement guidelines for help). 3. Remove the protective cap from each end of the optical audio cable. 4.
7 Sonos PLAYBASE If you purchased a Sonos SUB, place the SUB wherever it best fits your room—standing up or lying flat. You can place it in a corner, against the wall, behind, under, or next to any piece of furniture on any kind of floor surface. If you purchased a pair of Sonos speakers, such ast wo PLAY:5s, to use as surrounds, place the speakers to the left and right of your main viewing position, level with or behind the main viewing position.
8 Product Guide If you’re adding to an existing Sonos system: a. Check to see if there’s a Sonos software update available. If you see one, please update your Sonos system before adding the PLAYBASE. (PLAYBASE is compatible with Sonos software versions 7.2 and later). b. Go to More -> Settings -> Add a Player or SUB. c. Add any other Sonos products you purchased. You may be prompted to update the new Sonos product(s) after you add them. Note: Thick walls, 2.
Sonos PLAYBASE 9 SUB settings Follow the steps below if you wish to make any changes to the SUB settings. If you’re using a mobile device 1. Go to More -> Settings -> Room Settings. 2. Select the room the PLAYBASE and SUB are located in. It appears as Room (+SUB) in Room Settings. 3. Tap Advanced Audio -> SUB Settings. 4. Choose one of the following: • SUB: Choose On or Off to turn the sound from the SUB on and off.
10 Product Guide 5. Choose one of the following settings: • If you want to associate the SUB with a different Sonos speaker, select Choose Room for SUB and then select another room. • If you are not going to use the SUB right now, select Don’t use SUB. It will appear in Rooms as SUB (unused) until you select it and associate it with another Sonos speaker.
Sonos PLAYBASE 11 2. Select Room Settings if it is not already highlighted on the left. 3. Choose the room the PLAYBASE is located in from the Room Settings for drop-down list. The room name appears as Room (+LS+RS). 4. From the Basic tab, click Remove Surrounds. If these were newly purchased speakers, they will appear as Unused in the Rooms pane. If these speakers existed in your household previously, they revert back to their previous state.
12 Product Guide Play music The PLAYBASE streams all your favorite music even when the TV is off. Just open the Sonos app on your mobile device or computer and choose the music you want to hear. Note: If TV Autoplay is set to On, the PLAYBASE automatically stops playing music and switches to TV audio whenever the TV is turned on. Go to TV autoplay for more information. Radio by TuneIn Sonos has over 100,000 free radio stations, shows, and podcasts from around the world.
Sonos PLAYBASE 13 Music on your mobile device You can play music and podcasts stored on any mobile device that’s on the same network as Sonos. Just choose Browse -> On this [mobile device]. Google Play Music (Android devices) You can play music to Sonos directly from the Google Play Music app on any Android device. This feature is available for both Standard and All Access Google Play Music customers.
14 Product Guide • Room Name • Add SUB / Remove SUB (if SUB is present) • Add / Remove Surround Speakers (if surround speakers are present) Set up a remote control If you didn’t set up a remote control during PLAYBASE setup, or you want to use a different remote, follow the steps below.
Sonos PLAYBASE 15 Tune Your Room with Trueplay™ Go ahead, put your Sonos speakers wherever you want. Trueplay listens to your room and tunes your speakers so you hear the sound you love, custom tuned to the room where you’re listening (works on mobile devices running iOS 8 or later). 1. Choose More -> Settings -> Room Settings. 2. Pick a room and tap Trueplay Tuning to get started. Note: Trueplay tuning is not available if VoiceOver is enabled on your iOS device.
16 Product Guide Recalibrate the audio If you have a SUB and/or Sonos surround speakers associated with your PLAYBASE, you may wish to make some adjustments after initial setup. You will likely wish to recalibrate the audio if you move any Sonos products in the room. If you made any manual adjustments to EQ settings, these will be reset during the recalibration process. Note: If you have an iOS device and want to custom tune your speaker, see Tune Your Room with Trueplay™.
Sonos PLAYBASE 17 4. Audio Delay (Lip Sync). Drag your finger across the slider to increase or decrease the sound delay if the image and the sound are not in sync. If you’re using a computer 1. Select Manage -> Settings (PC) or Sonos -> Preferences (Mac). 2. Select Room Settings if it is not already highlighted on the left. 3. Choose the room the PLAYBASE is located in from the Room Settings for drop-down. 4. Select the TV Dialog tab. 5.
18 Product Guide Ungroup on autoplay As with any Sonos speaker, you can group and ungroup the PLAYBASE with other rooms. If ungroup on autoplay is checked, any Sonos rooms that are grouped with the PLAYBASE when the TV is turned on will automatically drop from the group. This setting is Yes by default. If you’re using a mobile device 1. Go to More -> Settings -> Room Settings. 2. Select the room the PLAYBASE is located in. 3. Tap TV Setup and Control -> Ungroup on Autoplay. 4. Select Yes or No.
Sonos PLAYBASE 19 • If you’re using a PC, select Manage -> Settings. • If you’re using a Mac, select Sonos -> Preferences. 2. Choose a room (on a Mac or PC, select the room from the Room Settings for drop-down list). 3. Turn off Speaker Touch Controls. Change room names If you’re using a mobile device 1. Go to More -> Settings -> Room Settings. 2. Select a room. 3. Tap Room Name. 4. Select a name from the list, or enter a new name, and tap Done. If you’re using a computer 1.
20 Product Guide Eliminate annoying messages on your TV when using a cable, satellite, or set top box remote After you disable your TV speakers, your television might display an annoying or confusing message when you adjust the volume on the PLAYBASE. This could be a message reminding you that your TV speakers are off, or a volume indicator unrelated to the sound from your PLAYBASE. If you have a programmable remote control, you can try the steps below.
Sonos PLAYBASE 21 Eliminate annoying messages on your TV when using a universal remote After you disable your TV speakers, your television might display an annoying or confusing message whenever you adjust the volume on the PLAYBASE. This could be a message reminding you that your TV speakers are off, or a volume indicator unrelated to the sound from your PLAYBASE. Try the steps below to configure your universal remote so this message no longer appears when you increase or decrease the PLAYBASE’s volume.
22 Product Guide 3. Select the appropriate setting to turn off your TV speakers. Depending on your TV make and model, choices may include: • Off / On • External Speaker / Television Speaker • Audio System / Television Speaker The choice in bold will turn the TV speakers off. • If none of these are applicable to your television, look for a setting that switches your TV output between variable and fixed and try switching the setting.
Sonos PLAYBASE 23 I want to change my wireless network password If your Sonos system is set up wirelessly and you change your wireless network password, you will also need to change it on your Sonos system. 1. Temporarily connect one of your Sonos speakers to your router with an Ethernet cable. 2. Choose one of the following options: • Using the Sonos app on a mobile device, select More -> Settings -> Advanced Settings -> Wireless Setup.
24 Product Guide Status indicators Indicator Lights Status Sonos Product Additional Information Flashing white Powering up BRIDGE, BOOST, CONNECT, SUB, CONNECT:AMP, DOCK, PLAY:1, PLAY:3, PLAY:5, PLAYBAR, PLAYBASE Solid white (dimly lit) Powered up and associated with a Sonos system (normal operation) BRIDGE, BOOST, CONNECT, SUB, CONNECT:AMP, DOCK, PLAY:1, PLAY:3, PLAY:5, PLAYBAR, PLAYBASE You can turn the white status indicator light on or off from More -> Settings -> Room Settings.
25 Sonos PLAYBASE Indicator Lights Status Sonos Product Additional Information Rapidly flashing orange Playback / Next Song failed CONNECT, CONNECT:AMP, PLAY:1, PLAY:3, PLAY:5, PLAYBAR, PLAYBASE Indicates either playback or next song was not possible. Solid orange During wireless setup, this occurs while the Sonos open access point is temporarily active. If you are not setting up Sonos, this may indicate warning mode.
26 Product Guide Important safety information Please read these instructions and heed all warnings. Keep them in a convenient location and make sure everyone in the household is aware of them. Location • Do not place the unit where it will be exposed to excessive heat (e.g., radiators, heat registers, stoves), direct sunlight, or a dusty environment (e.g., woodworking shop.) • Do not place the unit where it will be exposed to flammable liquids and/or fumes.
27 Sonos PLAYBASE PLAYBASE specs Feature Description Audio Amplifier Ten Class-D digital amplifiers. Speakers Ten amplified speaker drivers—six midrange and three tweeters and one woofer. System Requirements TV with optical audio output, broadband Internet, and the Sonos app. Music Music Services Supported Sonos works seamlessly with most music services, including Apple Music™, Google Play Music, Pandora, Spotify and Radio by TuneIn, as well as downloads from any service offering DRM-free tracks.
28 Product Guide Feature Description General Touch Controls Touch interface with Volume +/-, Play/Pause, Next Track, Previous Track; swipe horizontally across the touch controls to skip to the next track or previous track. Top Panel LEDs Indicates PLAYBASE status Power Supply 100 - 240 VAC, 50/60 Hz, auto-switchable Dimensions (H x W x D) 2.20 x 28.35 x 14.96 in. (56 x 720 x 380 mm) Weight 21.5 lbs. (9.