Instruction Manual
sonoro audio GmbH Unter Goldschmied 6 50667 Köln Germany info@sonoro-audio.com www.sonoro-audio.com 10/10 The manufacturer continuously works on the further development of all types and models. We ask for your understanding that changes of the scope of delivery in regard to form, components and technology are therefore possible at any time. The information, illustrations and descriptions in this manual therefore shall not constitute an entitlement to any claims.
1. Introduction English Congratulations on purchasing a sonoro cuboDock. This operating manual provides you with all information concerning the correct and safe operation of the device. • • • • • • Please read this operating manual in its entirety before using the device. Keep these instructions at a safe place. In case you pass this device on to a third party, please also include the operating manual. Non-compliance with this manual may lead to serious injuries and damage to the device.
• • • • • • Please ensure unobstructed access to the utilized power outlet at all times, so that the plug can be pulled immediately in case of an emergency. Please ensure that the electric cord is not bent, wedged or rolled over. Install the electric cord so that it cannot become a tripping hazard and so that it is out reach for children. Only use extension cords that are designed to handle the power input of the device.
• If the power plug, the adapter or the power cord of this device is damaged, they must be replaced by the manufacturer or the manufacturer‘s customer service to avoid the risk of electric shock. If liquid gets into the device or if the device was dropped or otherwise damaged, it must be checked by an authorized dealer. Separate the device from the power supply and contact an authorized dealer. English • 2.10 Cleaning • • Only use a dry, soft cloth to clean the exterior surfaces of the device.
4.2 Insert Batteries For installation please refer to Figure 10. RISK! Injury hazard due to incorrect handling of batteries! Battery must be treated with special care. - Remove battery from of the battery compartment as soon as it is empty or if the device will not be used for a longer period of time. - Do not throw battery into a fire and never make them subject to high temperatures. – Do not try to recharge standard batteries. This may present an explosion hazard.
English Declaration of Conformity Manufacturer: sonoro audio GmbH We herewith declares that the sonoro cuboDock is in conformity with the EMC directive 2004/108/EC, the LVD directive 2006/95/EC and R&TTE directive 1999/5/EC; with respect to its conception and style of construction as well as its performance as issued by us. In the case of a modification, unauthorized by sonoro audio GmbH being made to the device, the declaration looses its validity automatically.
Figure 1 Figure 2 8
English Figure 3 Figure 4 iPod Operation 9
Figure 5 Bluetooth 1 2 CODE: 0000 Figure 6 AUX 1 AUX 10 c a ble n o t i n cl u de d 2
Figure 7 English iPod Figure 8 When unit is switched ON press and hold the main unit standby key for about 1.5 seconds, then release it, and it will change the operating modes one by one. Unit is switched on: ….. iPod Bluetooth AUX iPod …..
1 Figure 9 A B C 2 iPod Model 12 Bumper iPod Model Bumper A C A C A C A C A — A B B B A B A C B A A A A A C B
English Figure 10 1 2 Figure 11 2 3 1 13
6. Technical Data Power Adapter: Ktec KSAS0451600250M2 Input: 100~240V ~ 50/60Hz 1.2A Output: 16V 2.5A Standby Power: < 1W AUX input: 3.5mm stereo jack Infra Red Remote control Battery: Lithium battery, type: CR 2025, 3V Bluetooth Bluetooth Specification: V2.1+EDR Operating Frequency Band: 2.4GHz ~ 2.4835GHz Output Power Class: Class 2 Support A2DP, AVRCP, HFP, HSP Support SBC, MP3, AAC decode Maximum communication range: approx.
7. Warranty • • • • English The following applies to the filing of warranty claims - without thereby limiting your legal rights: Warranty claims may only be asserted within a time period of no more than two years (one year for North America) starting with the date of purchase. Within the warranty period we will rectify all defects that are based on material or manufacturing defects at our discretion either through repair or a replacement of the device.
0929-610-10
