User's Guide

ManualsBrandsSonim ManualsElectronicsDirect Mode

1825 S. Grant Street Suite 200, San Mateo, CA 94402- USA

Tel : +1.650.378.8100 Fax : +1.650.378.8109

XPand Direct Mode for XP8

1 – removable, external antenna with standard SMA connector

2 – LED for XPand Direct Mode status

3 – retaining screw, remains screwed into XPand Direct Mode housing

4 – XPand Direct Mode front

5 – XPand Direct Mode back

Installation Instructions for XPand Direct Mode

Step 1 – push the screws out from the inside of the XPand Direct Mode accessory. Do not unscrew the screws from

the XPand Direct Mode. The screws retain inside of the accessory to allow for easy insertion and removal.

Step 2 – Place the XPand Direct Mode accessory on the handset.

Step 3 – load Sonim XPand Direct Mode application from the Google Play Store for XP8. Please reach out to Sonim

Support for more information on Sonim SCOUT. Alternatively, consult your mobile operator or third-party

application partner for integration. Sonim Software Development Kit (SDK) for Direct Mode is available at

http://www.sonimtech.allbound.com.

Sonim 1-Year Limited Warranty

Sonim provides a limited 1-year warranty for this accessory (hereinafter referred to as “Product”). Subject to the

conditions of this limited 1-year Warranty Sonim warrants this product to be free from major defects in design,

material and workmanship at the time of its original purchase by a consumer, and for a subsequent period of one

(1) year.

Conditions

1) This warranty does not cover any failure of the Product due to normal wear and tear, or due to misuse or

abuse, including but not limited to use in other than the normal and customary manner, in accordance with

the Sonim Product specifications and instructions for use and maintenance of the Product. Nor does this

warranty cover any failure of the Product due to software or hardware modification or adjustment, acts of

God or damage resulting from liquid interacting with the Product beyond what is described as acceptable

in the user guide for the Product.

Summary of content (6 pages)

PAGE 1
XPand Direct Mode for XP8 1 2 3 4 5 1 – removable, external antenna with standard SMA connector 2 – LED for XPand Direct Mode status 3 – retaining screw, remains screwed into XPand Direct Mode housing 4 – XPand Direct Mode front 5 – XPand Direct Mode back Installation Instructions for XPand Direct Mode Step 1 – push the screws out from the inside of the XPand Direct Mode accessory. Do not unscrew the screws from the XPand Direct Mode.
PAGE 2
) This warranty does not cover Product failures caused by installations, modifications, or repair or opening of the Product performed by any person other than a Sonim-authorized person. Tampering with any of the seals on the Product will void the warranty. 3) The warranty does not cover Product failures, which have been caused by use of other peripheral devices, which are not Sonim certified and intended for use with the Product.
PAGE 3
What frequencies does Sonim DM use? Sonim DM operates in the ISM915 band (902-928 MHz). Does Sonim DM work with other walkie-talkies or two-way radios? No, Sonim DM only works with other Sonim DM enabled XP8 handsets. Can I use Sonim XPand Direct Mode accessory with non-Sonim mobile devices? No, the Sonim XPand Direct Mode accessory will not work with non-Sonim mobile devices. It will only work on Sonim XP8 handsets.
PAGE 4
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
PAGE 5
  This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, except tested built-in radios. Cet appareil et son antenne ne doivent pas être situés ou fonctionner en conjonction avec une autre antenne ou un autre émetteur, exception faites des radios intégrées qui ont été testées.
PAGE 6
Use only the antennas which have been approved by the applicant. The non-approved antenna(s) may produce unwanted spurious or excessive RF transmitting power which may lead to the violation of FCC Part15C Canada limit and is prohibited. 4. Installation procedure Please refer to manual for the detail. 5. Warning Please carefully select the installation position and make sure that the final output power does not exceed the limit set force in relevant rules.