Quick Start Guide

1 TZ570 / TZ570W Front
The Service LED flashes yellow when any of the following events
occur: ActiveX Blocked, ActiveX or Java archive access denied,
Cookie Removed, Fragmented Packet Blocked, IP Spoof Detected,
Java Blocked, Land Attack Dropped, Newsgroup Accessed,
Press and hold until test LED starts blinking
to set the appliance into Safe Mode
For WAN access
Newsgroup Blocked, Ping of Death Blocked, Proxy Access Blocked,
Smurf Amplification Dropped, TCP SYN/FIN Packet Dropped, TCP
Xmas Tree Packet Dropped, Unauthorized TCP Packet Denied,
Unauthorized UDP Packet Denied, Unauthorized ICMP Packet
Denied, Website Accessed, Website Blocked.
2 Check Package Contents
Verify that your package has the following contents:
• SonicWall TZ570 or TZ570 Wireless appliance
• Antennas (2) (TZ570 Wireless appliance only)
• Ethernet cable
• Power adapter
• Power cord
• Quick Start Guide
• Safety Environmental Regulatory Information (SERI)
NOTE: The included power cord is approved for use only in specific
countries or regions. Before using a power cord, verify that it is
rated and approved for use in your location.
3 Deploy Using Zero-Touch
Your SonicWall appliance is Zero-Touch
enabled.
Zero-Touch makes it easy to register your
unit and add it to Capture Security Center
for management and reporting in 3 simple
steps.
For information about using Zero-Touch, see the Zero-Touch
Deployment Guide on the Support portal.
After completing the Zero-Touch deployment process, you can skip
to Mounting the TZ Appliance in this guide. For non Zero-Touch
deployments, continue with the next section.
4 Connect Interfaces and Power On
• Connect the WAN interface (X1) to your Internet connection using a
standard Ethernet cable.
• Connect the LAN interface (X0) to your computer using a standard
Ethernet cable.
Internet
X1 (wan)
X0 (lan)
• Connect the antennas to the appliance (TZ570 Wireless appliance
only).
• Connect the power adapter to the appliance and to the power
cable. Plug the power cable into an appropriate outlet (100-240
volts AC).
• The TZ appliance powers on, and the Test LED lights up during the
boot sequence and then turns off when boot sequence is complete.
120V AC
(U.S.)
CAUTION: Only use the included power adapter with this
appliance. Do not use a power adapter that is damaged or from
another appliance.
5 Run the Setup Wizard
• Navigate to https://192.168.168.168 in your Web
browser.
• Click on the link in “To launch the SonicWall Setup Guide, click
here.”
• The SonicOS Startup Guide opens.
• Click NEXT and follow the prompts in the Startup Guide.
TIP: Your computer should be using DHCP IP addressing.
• In the Credentials screen, enter a new administrator password. Click
NEXT.
• The automatically assigned DHCP IP settings are displayed in the IP
Configuration screen. Click NEXT.
• In the Setup Complete screen, review the settings and then click
DONE. The SonicOS login screen displays.
NOTE: The default administrator credentials are Username: admin
Password: password
NOTE: For manual configuration, refer to the latest SonicOS Quick
Configuration administration documentation.
SonicWall
®
TZ570 and
TZ570 Wireless
Quick Start Guide
Regulatory Model Number / Product:
APL262-0F7 / TZ570
APL62-0F8 / TZ570W