User Manual

Quick Start Guide
Check Package Contents
Verify that your package includes the following
contents:
SonicWALL NSA 220 or NSA 220W Series
Appliance
Ethernet Cable
Standard Power Adaptor and Cord
DB9 -> RJ45 (CLI) Cable
* Wireless Antennas (3) included with NSA 220W only
3
Connect the SonicWALL NSA 220 series
appliance to the network using standard
Ethernet cables as shown in the illustration.
4
In a Web browser, navigate to
http://www.mysonicwall.com/.
If you do not have a MySonicWALL account,
click the Not a Registered User? link to
create an account.
Under the Quick Register section of your
MySonicWALL account, enter the Activation
Key or Serial Number of the SonicWALL NSA
series appliance you are registering.
Conrm your serial number, enter a friendly
name for your appliance, and enter your
authentication code in the Quick Register >
Add New Product section.
Click Register.
2
Using the computer connected to the LAN
port of the SonicWALL NSA 220 series
appliance, navigate to http://192.168.168.168/
in a Web browser.
The Setup Wizard takes you through several
basic steps to get your SonicWALL NSA series
appliance congured for your network.
Power cords are included with units in North
America only.
1
Connect the SonicWALL NSA Appliance
Register
Configure the Management Host &
Setup Wizard
SonicWALL NSA Series Appliances
Registration MUST be completed prior to
connecting to the appliance.
http://www.mysonicwall.com
http://192.168.168.168/
After the Setup Wizard, the appliance may
reboot. Please wait a few minutes while the
appliance reboots to save the updated settings.
*
wan
X1
lan
X0
lan wan
Internet router
or modem
Internet
Service
Provider
Connect the included power cable and adaptor,
and plug into an appropriate outlet.
lan
120V AC
(U.S.)
The NSA 220 series appliance powers on and
the orange “test” LED blinks during the boot
sequence. Continue to Step 4 when the “test”
LED is no longer lit.
This process may take up to 2 minutes.
2 min
http://192.168.168.168/
http://192.168.168.168/
With your computer connected to the X0 port
on the SonicWALL appliance, congure your
IP with an address on the 192.168.168.0/24,
such as 192.168.168.20.
security
on/act
wlan
10/100/act
1000/act
lan wan
X3 X4 X5 X6
X2
X1
X0W0
U0/U1
Network Security Appliance
10/100/1000
NSA 220
wireless-N
security
on/act
wlan
10/100/act
1000/act
lan wan
X3 X4 X5 X6
X2
X1
X0W0
U0/U1
Network Security Appliance
10/100/1000
NSA 220
wireless-N
security
on/act
wlan
10/100/act
1000/act
lan wan
X3 X4 X5 X6
X2
X1
X0W0
U0/U1
Network Security Appliance
10/100/1000
NSA 220
wireless-N
C
M
Y
CM
MY
CY
CMY
K
232-002003-50_Rev_A_SonicWALL_NSA_220_Series_Quick_Start_Poster_Inside.pdf 1 9/20/2011 7:50:50 PM