SATELLITE SPEAKERS INSTRUCTION MANUAL LS4T SAT | LS6T SAT
Introduction NOTE: AS A GENERAL GUIDELINE, (1) SATELLITE WILL COVER ABOUT 250 SQUARE FEET OF LISTENING AREA Thank you for purchasing SLS Speakers. When properly installed, these speakers will provide you with years of outdoor entertainment pleasure. To get the most out of your new speakers, please read this manual thoroughly before you begin installation. Use care to select satellite locations that are equally distant from the main listening area.
Satellite Wiring and Installation 2. Once the accessories have been mounted at the desired locations, mount the satellites by threading the mounting shaft into the corresponding opening of the accessory. Sonance Landscape Series systems allow for speakers to be daisy chained together. In a typical system with one zone of audio, simply run a stereo or 4 conductor speaker wire from the amplifier to the closest speaker.
Specifications Model: LS4T SAT Model: LS6T SAT Tweeter: 1” (25mm) polyurethane dome Tweeter: 1” (25mm) polyurethane dome Woofer: 4 1/2” (114mm) injection molded polypropylene cone with a Santoprene rubber surround Woofer: 6 1/2” (165mm) injection molded polypropylene cone with a Santoprene rubber surround Frequency Response: 75Hz - 20KHz ±3dB Frequency Response: 55Hz - 20KHz ±3dB Transformer Taps: 40W, 20W, 10W, (5W 70V), 8 Ohms Transformer Taps: 60W, 30W, 15W, (7.
LIMITED FIVE (5) YEAR WARRANTY Sonance warrants to the first end-user purchaser that this Sonance-brand product (“Product”), when purchased from an authorized Sonance Dealer/Distributor, will be free from defective workmanship and materials for the period stated below. Sonance will at its option and expense during the warranty period, either repair the defect or replace the Product with a new or remanufactured Product or a reasonable equivalent.