Instructions / Assembly

PLATE
PLATE
WIRE NUT
OUTLET BOX
OUTLET BOX
INSTALLATION INSTRUCTIONS
R E A D IMP O R TA N T SAFETY TIPS B EFORE PROCEED I NG WITH I NSTA LLA TIO N
1
TURN OFF
POWER SOURCE
Place wall switch in off position, if fixture
has built-in switch or chain pull, switch or
pull chain so fixture is off.
IFP161INC
SAFETY TIPS
3
4
5
2
Attach cross bar to outlet box with outlet box screws
(8-32 x 1/2”). Screws NOT provided.
OUTLET BOX
CROSS BAR
OUTLET BOX
SCREWS
GROUND WIRE
Remove cage and diffuser from plate by loosening
screw at bottom. If the photo eye is installed, unscrew
nylon ring from photo eye stem. Tilt cover out and lift to
release from back pan.
SCREW
DIFFUSER
CONNECT THE WIRES. NOTE: Attach black fixture wire
to black supply wire, white fixture wire to white supply
wire. Do not mix up. Attach fixture ground wire to
ground wire from outlet box. Use provided wire nuts.
OUTLET
BOX
NIPPLE
PLATE
THUMB NUT
Position the fixture over the nipple and secure in place
with thumb nut.
Screw light bulb into socket. Be sure to use bulb with
wattage no greater than specified for fixture.
6
BULB
PROVIDED MOUNTING HARDWARE
1, 1 3/8 NIPPLE
1 THUMB NUT
3, WIRE NUTS
1 CROSS BAR
WIRE NUT
PLATE
PHOTO EYE RING
(OPTIONAL)
CAGE
PLATE
PLATE
WIRE NUT
OUTLET BOX
OUTLET BOX
INSTALLATION INSTRUCTIONS
R E A D IMP O R T A N T SAFETY TIPS B EFORE PROCEED I NG WITH I NSTA LLA TIO N
1
TURN OFF
POWER SOURCE
Place wall switch in off position, if fixture
has built-in switch or chain pull, switch or
pull chain so fixture is off.
IFP161INC
SAFETY TIPS
3
4
5
2
Attach cross bar to outlet box with outlet box screws
(8-32 x 1/2”). Screws NOT provided.
OUTLET BOX
CROSS BAR
OUTLET BOX
SCREWS
GROUND WIRE
Remove cage and diffuser from plate by loosening
screw at bottom. If the photo eye is installed, unscrew
nylon ring from photo eye stem. Tilt cover out and lift to
release from back pan.
SCREW
DIFFUSER
CONNECT THE WIRES. NOTE: Attach black fixture wire
to black supply wire, white fixture wire to white supply
wire. Do not mix up. Attach fixture ground wire to
ground wire from outlet box. Use provided wire nuts.
OUTLET
BOX
NIPPLE
PLATE
THUMB NUT
Position the fixture over the nipple and secure in place
with thumb nut.
Screw light bulb into socket. Be sure to use bulb with
wattage no greater than specified for fixture.
6
BULB
PROVIDED MOUNTING HARDWARE
1, 1 3/8 NIPPLE
1 THUMB NUT
3, WIRE NUTS
1 CROSS BAR
WIRE NUT
PLATE
PHOTO EYE RING
(OPTIONAL)
CAGE