User Manual:ST-GM16XX2 Product Name ESL Graphic TAG Model Name ST-GM16XX2 Customer World wide SOLUM CO.
1. General Outline 1.1 Overview S-Label EPD-TAG is the product for RF transmission solution ideal for ZigBee and other low cost, low power IEEE 802.15.4 RF transmission applications. S-Label EPDTAG consists of RF Transceiver, RF circuitry and 8051-compatible MCU offering ZigBee network protocol and 802.15.4 MAC protocol and other peripheral devices. 1.2 Features · Display : EPD PANEL (Graphic type) · Communication : Wireless communication based on IEEE 802.15.4 · Operating on 2.
1.4 Physical Dimension (mm) 1.5 Appearance SOLUM CO.
2. Specifications 2.1 Product Item Description Size 4 3 x 3 6 x 1 2 mm CR2450 Lithium Battery (3V, 1ea) Battery 2.4 ~ 3.3Vdc(condtion : In active status) Display EPD PANEL display (Graphic type) Information display Price, Unit, Discount, etc. Communication IEEE802.15.4 2.4GHz ISM Band (Range “2405~2480MHz”) Distance Radius 20m (Indoor, Line of Sight) Operation Temp. -25 ~ 40 ℃ Etc. No additional anti-theft locking structure : Rail Mounted only 2.2 Radio (RF) 2.2.
3. Assembly Specifications 3.1 Outline Drawing of EPD TAG 3.2 Exploded view of EPD TAG SOLUM CO.
3.2 Sticker Label Specification 3.2.1 Serial Number information * Serial 1, 2 Code Value 13 3 G S A A 033 ① ②③④⑤⑥ ⑦ ① Year : Last two digits of manufacturing year.
3.2.2 MAC Label drawing & example (Front, Back) · Product information is indicated in a printed sticker label. The information consists of MODEL(model name), MFD(manufacturing date), S/N(serial number), MAC(MAC address), CE & KC certification mark, FCC ID and Manufacturer(SEMCO). 1) Model Name : ST-GM16XX2 2) MFD : (month).(date).(year) ex) SEP.25.
Cautions for Treatment Provisions should be made to protect against any damage to the product caused by improper handling. It is highly recommended that the product should be installed within 3 months from the date of arrival in the logistics hub. Recommended storage condition is in 0-40 Celsius degree, 20-60% RH environment. This RF device operates on the 2.4GHz frequency band and can produce radio interference.
This product uses 2.4GHz frequency band for wireless communication network. Radio communications can be limited or affected by other applications which share same frequency band, such as WiFi, Bluetooth, Zigbee, etc. Battery Replacement ■ Audience Authorized persons with the following knowledge are allowed to replace the battery. -. Battery / -. Electronic assemblies like circuit board/ -.
WARNING : This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. This device complies with part 15 of the FCC Rules.
