CUSTOMER APPROVAL SHEET Company Name MODEL CUSTOMER APPROVAL □ APPROVAL FOR SPECIFICATIONS ONLY (Spec. Ver. 1.1) □ CUSTOMER REMARK: Issued By Checked By Approved By SR. Jang TH Lee BY.SEO SOLUM CO., LTD. th A-6 floor, 357, Guseong-ro, Giheung-gu, Yongin-si, Gyeonggi-do 16674, Korea Tel: +82-31-8006-7691 REV 1.
NEWTON S-Label Datasheet REV 1.1 2021-05-24 Summary This datasheet presents the general performance and specifications of NEWTON S-Label for SOLUM Electronic Shelf Label (ESL) System. © SOLUM. All rights reserved The names of actual companies and products mentioned herein may be the trademarks of their respective owners.
Table of Contents 1 GENERAL DESCRIPTION ..................................................................................................... 5 1.1 FEATURES ..........................................................................................................................6 1.2 TYPICAL APPLICATIONS ......................................................................................................... 6 1.3 APPEARANCE.............................................................................
Document History Rev. Date 1.0 23,April, 2021 Initial release 1.1 24,May, 2021 Dimension, Label Weight, Shape REV 1.
1 General Description NEWTON S-Label product is a part of the SOLUM Electronic Shelf Label (ESL) System, which includes NEWTON S-Label, NEWTON Gateway, and Remote Controller. The ESL System electronically displays customer content (i.e. price, product, and promotion information) on the SLabels, which have traditionally been printed or written on paper in places such as retail markets and warehouses.
1.1 Features - Display: E-Paper Display (EPD) Active Type - Sizes: 2.6”, 5.85”, 9.7”,12.2” - Display Color: BW (Black, White) / BWR (Black, White, Red) - Wireless Frequency: 2.4 GHz Unlicensed ISM band - Communication Protocol: BLE physical layer with SOLUM proprietary protocol - Battery operated low power consumption - NFC (13.56MHz): Felica ® NFC Forum Type 3 - Up to 7 page display screens - RoHS compliant 1.
2 Specification 2.1 Product Specification Item Description Label Sizes 2.6”: 41.6 x 77.46 x 12.8 mm / 1.63 x 3.04 x 12.8 inch 5.85”: 65.8 x 166.27 x 14.1 mm / 2.59 x 6.54 x 0.55 inch 5.85” Freezer : 65.8 x 166.27 x 15.6 mm / 2.59 x 6.54 x 0.64 inch 9.7”: 167.65 x 220.0 x 14.2 mm / 6.60 x 8.66 x 0.55 inch 12.2”: 215.24 x 261.6 x 14.8 mm / 8.47 x 10.29 x 0.31 inch Display Sizes 2.6”: 30.7 x 60.0mm / 1.20 x 2.36 inch 5.85”: 47.7 x 139.0mm / 1.87 x 5.47 inch 5.85”Freezer : 47.8 x 139.1 mm / 1.88 x 5.
Radio (RF) Specification Specification Item Tx Parameter Unit Typ Max Tx Power -3 0 4 dBm [Carrier Frequency Offset and Drift] -75 0 75 kHz - 8 mA Total current at max Tx Power - - dBm PER < 5% Tx Current Rx Condition Min Receiver Sensitivity -85 2.2 NFC Specification Item NFC REV 1.1 Parameter Specification Unit Min Typ Max - 20 - mm - 0.
2.3 Mechanical Drawing 2.3.1 Case Dimension 2.6” Model (Unit: mm) Figure3. 2.6” Mechanical Dimension REV 1.
5.85” Model (Unit: mm) Figure 7. 5.83” Mechanical Dimension 9.7” Model (Unit: mm) Figure 4. 5.85” Mechanical Dimension REV 1.
5.85” Freezer Model (Unit: mm) Figure 5. 5.85”Freezer Mechanical Dimension REV 1.
9.7” Model (Unit: mm) Figure 6. 9.7” Mechanical Dimension REV 1.
12.2” Model (Unit: mm) Figure 7. 12.2” Mechanical Dimension REV 1.
2.4 Label Marking 2.4.1 Product Info and MAC Display in S-Label Figure 8. Product and MAC Labels Product information is indicated on the sticker label of the S-Labels. The information consists of MODEL (model name), MFD (manufacturing date), S/N (serial number), MAC (MAC address), CE certification mark, FCC ID and Manufacturer (SOLUM). 1) Model Name: EL-①②③H2④⑤⑥ (i.e. EL016H3WRA) - EL: Label - ① ② ③: Label Display size 016=1.6” 029=2.9” . - ④: Label Case Color W - WHITE B – BLACK .
Freezer Label Red Color Label Yellow Color Label (BW) (BWR) (BWY) WHITE ELF58H2WMN WHITE BLACK EL058H2WRN 9.7" EL097H2WRN 12.2" EL122H2WRN 2) MFD: (Month).(Date).(Year) 3) S/N: Serial Number Information (See Section 2.5.1) REV 1.1 BLACK EL022H2WRN 2.6" 5.85" WHITE i.e. JAN.26.
3 NFC Antenna Location TBD REV 1.
4 Packaging TBD Figure 9. Package REV 1.
5 Product Handling Precautions Provisions should be made to protect against any damage to the product caused by improper handling. The purchaser assumes any responsibility for damage to the product caused by improper handling. It is highly recommended that the product should be installed within 3 months from the date of arrival into the logistics hub. The recommended storage environment is 0 ~40 / 32~104 , 45%-70% RH. 5.
If this product operates abnormally while removing battery or replacing battery, it needs to be discharged by contacting the battery terminals (+) and (-) in the product. This product uses the 2.4GHz frequency band for the wireless communication network. Radio communications can be limited or affected by other applications that share the same frequency band, such as WiFi, Bluetooth, Zigbee, etc.
Battery Directional Red Wire: (+) Positive Black Wire: (-) Negative Battery Pack Figure 10. Battery Directional REV 1.
6 Certifications 6.1 Overview Size Model FCC IC CE* 2.6" EL022H2WRN o 5.85" EL058H2WRN o 5.85”F ELF58H2WMN o 9.7" EL097H2WRN o 12.2" EL122H2WRN o TELEC KC IP67** - Food contact test passed - IEC 62471 standard (Photobiological Safety of Lamps and Lamp Systems) compliant *CE: RF/EMC/LVD/RoHS2 6.2 FCC WARNING: This equipment may generate or use radio frequency energy.
connected. - Consult the dealer or an experienced radio/TV technician for help. 6.3 CE We hereby declare under our sole responsibility that the electrical product above is in compliance with the essential requirements of the Radio Equipment Directive (2014/53/EU) by application of EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013 EN 62479:2010 EN 301 489-1 V2.2.0 EN 301 489-17 V3.2.0 EN 300 328 V2.2.
7 Reliability Test High Temperature Operation Low Temperature Operation High Temperature/Humidity Operation High Temperature Storage Temperature Shock (Storage) ESD Package Drop Test Package Random Vibration Test REV 1.
8 Cleaning For Spray Cleaning: Steps ① Lightly spray all surfaces and wait a few seconds. ② Gently wipe clean using a cloth or tissue. ③ Let the labels dry. Notes: Use mild, non-alcoholic detergents or glass cleaner. Recommend non-abrasive cloths: Microfiber, Cotton T-shirt, Cotton handkerchief, Cotton tea towel For Wet Tissue Cleaning: Steps ① Stand or lay down the labels. ② Wipe using wet tissues. ③ Let the labels dry. REV 1.
9 Battery Handling Guide 9.1 Avoiding hazards in lithium battery handling 1. Do not short circuit (Fig. 1) . Direct connection of plus (+) and minus (-) poles may result in leakage, heat generation, explosion and/or fire. . Do not store and/or carry batteries with metallic items, such as a necklace. 2. Do not stack and/or jumble batteries (Fig. 2) . Stacked and/or jumbled batteries may cause a short circuit and/or forced discharge from contact with other batteries. .
4. Do not dispose of batteries in fire . Disposal of batteries in fire is extremely dangerous with a risk of explosion and violent flaring. 5. Do not heat batteries . Heating batteries above 100 /212°F may damage the resin in crimping, separator and other parts, potentially causing an electrolyte leak, internal short circuit, fire and/or explosion. 6. Do not solder directly onto batteries .
9.2 Proper Storing and Disposing of Lithium Batteries ■ To minimize risk of fire and explosion of batteries, be sure to follow the instructions below. ■ Proper use of battery tray is outlined below. With batteries properly placed into each tray slot stack the trays in the same orientation use an empty tray on the top stack tape the stack together to avoid falling apart. ■ Follow local regulations for proper battery disposal guideline. REV 1.