Product Name: BLEUBOX UHF 1CH Mid Range Controller Model: R-IN-UHF-5239U
Initial Operation BlueBox Quick Start Guide iDTRONIC GmbH Donnersbergweg 1 67059 Ludwigshafen Germany/Deutschland Phone: Fax: E-Mail: Web: Page 2 of 12 +49 621 6690094-0 +49 621 6690094-9 info@idtronic.de idtronic.de Issue 0.1 – 16. November 2018 – Subject to alteration without prior notice.
BlueBox RFID Devices Initial Operation Contents 1 Initial Operation ....................................................................................................................................................... 4 1.1 1.2 1.3 1.4 2 Connecting the Cables ....................................................................................................................................... 4 USB Driver Installation ...................................................................................
Initial Operation BlueBox Quick Start Guide 1 Initial Operation 1.1 Connecting the Cables Antenna Connection USB Connection The BlueBox will accept all commands on all interfaces. So you can perfom all tests using the USB connection. Power Connection Figure 1.1 1.2 Connection Overview USB Driver Installation After Plug-In windows may request the USB driver. Please navigate the installation wizard to the file \04_USB_Driver\BB2VCP.inf Finally the device shall connect as VCom Port.
BlueBox RFID Devices 1.3 Initial Operation Installation of Test/Demo Software “BLUEBOX SHOW” Unzip the file package “BLEUBOX-SDK-x.yy.z.rar” and start setup. This will not only install the SDK, but also the test/demo software “BLUEBOX SHOW” to operate all features of the device. 1.4 Establish Connection to a BLUEBOX Figure 1-2 BLUEBOX Show screenshot. RS232 connection configuration. Click on the toolbar connect button (Figure 1-3) to connect with the reader.
Operating BLUEBOX Show for Testing 2 Operating BLUEBOX Show for Testing 2.1 Overview Figure 2-1 2.2 BlueBox Quick Start Guide Start screen that appears after connecting to a BLUEBOX first Automatic Mode, Continuous Mode, Auto-Read On factory default, the BlueBox automatically scans for RFID tags. That means it automatically emits UHF frequencies. Figure 2.
BlueBox RFID Devices 2.3 Operating BLUEBOX Show for Testing Adjusting the RF TX Power Navigate to this configuration page. Change the value of “RF output power” to the desired test value. Larger numbers will result in more RF TX Power. Figure 2-3 Parameters RF Configuration 2.4 Test If RFID Tags Are Detected Open the screen “Inventory”. Now press [ Request ] on the bottom of the screen. In every operation mode the device will scan for tags and show them.
Driver Installation on Windows 8 OS 3 BlueBox Quick Start Guide Driver Installation on Windows 8 OS Windows 8 does not allow installing drivers that are not signed by Microsoft. Below is described how to de-activate the driver signing check. First, select "Settings" on the right side of your screen: Select "Change PC Settings": Navigate to "General" settings and then scroll down to "Advanced Startup".
BlueBox RFID Devices Driver Installation on Windows 8 OS Then click on "Startup Settings": Then click on the "Restart" button: OEM RFID Modules Page 9 of 12
Driver Installation on Windows 8 OS BlueBox Quick Start Guide After your computer reboots, another screen will appear where you will be asked to press a number to choose an option. So press 7 or F7: When you install the driver, this prompt will appear on screen.
BlueBox RFID Devices OEM RFID Modules Driver Installation on Windows 8 OS Page 11 of 12
FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
4 Figure 1.1 Figure 1-2 Figure 1-3 Figure 2-1 Figure 2.2 Figure 2-3 Figure 2-4 Figure 2-5 Table of Figures Connection Overview ........................................................................................................................................ 4 BLUEBOX Show screenshot. RS232 connection configuration. ........................................................................ 5 BLUEBOX Show connect button in the toolbar. .....................................................................