Operation Instructions

ES980S
Solar panel charging
Product introduction
Specifications
Functions display
Adapter charging
Power ON/OFF button operation instructions
1, Solar panel
2, Solar charging indicator
3, USB Output port 1
4, Micro input port
5, USB Output port 2
6, USB silica gel plug for protection
7, Power indicator
8, Power switch/shift
9, TYPE-C input port
10, Wireless Charger
11, Wireless Charger indicator
12, LED lighting
13, Lanyard
· This product is a portable solar charger power bank. It supports QC2.0/QC3.0 Output Fast Charging Protocol, FCP/AF-
C/SFCP Input and Output Fast Charging Protocol, MTK PE+1.1&2.0 Output Fast Charging Protocol, USB
C/PD2.0/PD3.0 Input and Output Protocol, USB C PD3.0 PPS Output Protocol, compatible with BC1.2/Apple/Samsung
Mobile Phone. The charging input terminal of the product is micro USB, TYPE-C interface and solar energy input, using
constant current and constant voltage charging mode to charge the built-in battery; Out1 is a normal output
5V/3A, Out2: supports QC2.0/QC3.0 DC5V/3.0A 9V/2A 12V/1.5A, TYPE-C input DC5V/3A 9V/2A, output
DC5V/3.0A 9V/2A 12V/1.5A, supports PD2.0/PD3.0 PPS FCP AFC SFCK MTK bidirectional fast charging protocol. Out1
is a 5V general output interface, Out2 and TYPE-C are fast charging interfaces, and only 5V output is supported
when two or more output interfaces are used at the same time. Solar charging input DC5V/300mA. It can supply
power and charge for various brands of mobile phones, IPAD, PSP, MP3/MP4, PDA and other digital products.
· Using the latest intelligent fast charge and discharge management chip, the efficiency is up to 90%, multiple
intelligent protection functions, safe/reliable use, ultra-low self-consumption.
· Built-in large capacity lithium-ion battery, ultra-long endurance.
When the external DC power supply is connected to the product through micro USB or TYPE-C, the product will
charge the built-in battery. Four blue LEDs will automatically light up the current power of the product, as follows:
When the power is off, Click to turn on the wireless charging function and wake up the output function of each port, and
display the battery power. At the same time, when the red light flashes three times, the long light indicates that the
wireless charging has started. At this time, it is detected that the correct wireless charging and receiving terminal or
load will turn on the green light and breathe; when the wireless charging and indicating lamp is full, it will turn off.
Double-click to turn on or off the LED lights. In the state of the LED lights on, click the button to switch to red and
blue flashing alternately. Click again to turn off the lights.
Micro Input:DC 5V/2A 9V/2A
TYPE-C Input: 5V/3A 9V/2A
Solar charging:5V/300mA
Output1: 5V/3A
Output2: 5V/3A 9V/2A 12V/1.5A
TYPE-C Output: 5V/3A 9V/2A 12V/1.5A
Wireless Output: DC 5V/1A 7.5V/1A 9V/1.1A
1
9
2
12
11
10
8
7
13
45 3
6
100%
75%~99%
50%~75%
flash
flash
25%~50%
0%~25%
Power LED1 LED2 LED3 LED4
on on on on
on on on
on on off
on off off
flash
flash
off off off
Solar Charger Power Bank Use Manual
WZ-RD-TZ-097
V1.0
2019-09-10
When the product solar panel receives sunlight, the best way to receive sunlight illumination is in 45 degrees. The
built-in charging circuit automatically charges the built-in battery. The solar indicator light is always green, which
indicates that the solar panel is charging the battery. To view the power consumption, press the power ON/OFF
Power volume review
Charging Digital Equipment
Normally, just short press the Power ON/OFF button at the side of the product, and the product starts to supply
power to the USB output. The LED power indicator shows the power volume as shown in below table. After 30
seconds of not connecting to the load, the product shuts down and enters standby state.
1. Short press the Power ON/OFF button to start the product to supply power to the USB output. At this time, the
product and the digital device can be charged by connecting the charging cable of the digital device to the product
and the digital device. (Product work instructions refer to Power volume review)
2. When the product is standby, connect the digital device with the charging cable of the digital device and then
connect the product. The product can automatically start charging the digital product without pressing the button.
3. When the output USB ports are not connected to the charged device for 30 seconds or when the charged device
is full, the product will turn off all output and power display and enter a low power standby state.
Wireless Charging
Press the button to enter the wireless charging state. When using the wireless charging function alone, the
maximum output can be 10W to charge your product. When USB1, USB2, TYPE-C are used at the same time or the
current is in the range of 2A, the wireless charging will automatically switch to 5W. If the wireless charge is more than
2.5A, it will automatically turn off.
LED Lights instruction
Double-click the Power ON/OFF button to turn on the LED lights when the illumination lamp is off. The white lamp
will be on for a long time. Click again, the blue and the red lights will flicker alternately. The white lamp will turn off
as well. Clicking/double-clicking again, the lights will turn off.
Protection function
Input undervoltage undercurrent protection
If the adapter with actual specifications less than 5V/2.1A is used to charge the product (such as 5V/1A adapter), the
product will automatically adapt to the output current of the adapter (automatically reduce the charging current of the
built-in battery) to prevent damage to the
adapter. The product does not support discharge output when charging, but
it can discharge when solar charging input.
Input Short Circuit Protection
If the product input short circuit is caused by improper use or other factors (such as product charging cable breakage
short circuit), the product will automatically shut off the charging circuit to prevent product damage and battery
power backfilling.
Output Overcurrent Protection
If the output current of any USB is more than 3.2A due to improper use or other factors, the product will automatically
turn off the output to protect the charged device and the product itself. When the short circuit is removed, if the
flashing of the button power display is extinguished after four times, it needs to be charged and activated again to
start the discharge.
Output Short Circuit Protection
If any USB output is short-circuited due to improper use or other factors, the product will automatically turn off the
output to protect the charged device and the product itself. When the short circuit is removed, if the flashing of the
button power display is extinguished after four times, it needs to be charged and activated again to start the
discharge.
Warnings:
DO NOT put this product under the over heating environment(such as inside the airtight car which is under great
sunlight heating, Radiators, Stoves and any other equipment or devices which produce high temperature). The over
heating would probably damage the product or even cause any potential threaten to the safety of human life.
The product is consisted of sophisticated electronic components, non-professionals can not disassemble the
product, to avoid accidentally hurting yourself or damaging the product.
There are lithium-ion batteries inside the product. Please pay attention to the use under the local laws and
regulations, can not be discarded, pay attention to recycling. DO NOT put the disposal battery under the
over heating environment like strong sunlight , fire ,or any other similar conditions.
Power
75%~100%
50%~75%
25%~50%
10%~25%
0%~10%
LED1 LED2 LED3 LED4
on on on on
on on on off
on on off off
on off off off
flash off off off
button (Note: Actual display power can refer to "Power View") to view the power consumption.