Warranty Service Thanks for purchasing from Somali. Having issues with your Somali cameras? Please contact us through either ways below. Somali care team staffs would offer you a best solution to solve any problems within 24 hours Register via below link to get 2 Years Extended Warranty .
Table of Contents Part 1: Before Installation... none 1.7 Part 2: In-App 8-14 Part 3: Physical Installation Part 4: Detailed App Instructions, Part 5: How to Save and Delete Videos Part © More Settings.
Very Important Tips 1. Somali camera can only be set up with 24g WI-Fi network. (IT's ok two use Cell phone 4G data to live viewing I after the camera was set up with 24g WI-Fi network firstly) 2. You may possibly need a WI-F extender if your WI-Fi signal is weak around the yard where you want to install it 3. At least 1-3 hours direct sunlight fo the camera every day is needed, the more sunshine the better to avoid manually charge it frequently.
Before Installation Charging Your Camera Please charge the camera about 10-13 hours by plugging i into a power source using the provided USB cable. After connecting the camera with App, the App will indicate the battery status. (There's no indicator to show charging status from the camera) Press tn power on She GE insert SD card Please format the 8D cans to FAT format (Application to Windows system ONLY), then install the micro-5 card when the camera is off.
ane DE Package Content Ix Camera 1x Usk Cable 1x Camera 5800 bracket User Manual 1x Quick Guide 1x Fittings Bag 1x Mounting Hole Template
i 314 Vivian sure the diviners between your shone router and the camera 8 no more Han 15 feet when your rem to pair the carvers Base that the WE seal denature on your shone is rood 1. Download the App: Please locate the your Google Play store or App store to download the solipsism App. 1.1 Allhallows" use mobile cellular data and wireless LAN, otherwise it may be failed to add S800 camera. 1.
2. Register an account Open the App and register your account with your email address. {1) Open the app and register your account with your Email address and i is recommended to verify your account from email so that you can retrieve password of your Somali account in case, {2) Set a password for your account and make note to remember it.
4. Connect your phone to 2.4Ghz wife first, Only work with 802.11 b/a/n frequency band 2.46 WI-Fi . Not work with 802.11 higher frequency band. {it's ok to use Cell phone 4G data to live viewing it after the camera was Paired up with 24g WI-Fi network firstly) 5. Point the antenna to the sky, antenna is not waterproof downward. 6. Turn on the camera Press the power button to turn on the camera. LED flash green once and then flashes blue.
sin » 7. Pairing the camera with the App Mote: Please ensure that your phone connect te the 2.4Ghz wife before you pair the camera, make sure your router password in mind before you start the pairing process. 13 Click "Add a device” and then choose “Setup device”, click "Yes", when you hear the following voice * The camera is now ready to begin pairing”.
3} Input the CORRECT WiFi password of your router, if you input a wrong password you will not be able to connect it successfully. Click the eye icon to double confirm the password you entered correct Your WI-Fi name will be shown hers automatically Click the icon to double confirm the password you entered compact Method 1: QR code configuration 1.
Method 2: Sound wave configuration 2.
a... 4) Congratulations! You have connected your camera to the App successfully, now you can live view the camera on your phone anytime and anywhere. if you're unable to pair the camera, Please check below suggestions: 1.Make sure your phone is connected with your 246 WI-Fi. When your 24g WI-Fi connected correctly to your phone your WI-Fi name will be recognized by the camera and pop-up on the WI-Fi input page automatically. 2.
8.How to Share Your Camera with More Users When you can use your camera prosperity can start to share your camera to your friends or family members, click” & "and choose "share permissions”. input the account that you want to share with.
9.How to unbind your camera Please do not forget to unbind your camera from your App when you plan to return the caners, to avoid any personal information disclosure risk. or And unbind your camera as following steps, click” 9: " and then choose “dieter” 10.Night Vision Mode The camera is defaulted as spotlight mode, you can tap on the spotlight bulb to change it to LED night vision mode, the spotlight will not be triggered to tum on when there's any motion.
sews s # Push Mode This icon indicate that the push mode is on, click it to tm off push mode and then you cannot receive any notifications. if you want to turn on or off the sound of notification, please refer to page 26. Note: When you turn off the notification here the motion triggered scents will keep recording to cloud or micro sd card as you set. 3 Cloud storage The motion detection video clips will be saved in the cloud. Cloud video length is 10 seconds defaulted and free for 30 days.
Physical Installation €B Check your camera signal strength Lino satisfied with video’ smoothness ‘Ariel signal strengthen in App 5 nat strong, we would Hippest adding wil extender stamen this Router and the camera, We suggest installing the camera shout Sit. Yous friary adjust the Tamera angle physically: according 10 the live view in your mobile.
Physical Installation Camera Hardware installation: woos 2.0nll holes using a crewel the bracket ticktock the template screw driver on the on the wall and onto the wall red dot of template screw on the camera using the screw nut if you bought a solar panel for this camera, there are two ways to install the solar panel. A.
Ae Te image Quality Resolution 1080P Specifications © Los Lens angle FOVI05 Video format H.264+ Video Frames per fps Specifications second SD card GB-Max 64GB support Output Built-in speaker Audio Input Built-in microphone Communications WiFi 2.46 Battery capacity | 14400maA Battery Standby time Max 6 months Power consumption _ Temperature -20°C + Applicable Environment di Humidity {Non-condensing} al i" Android 2.3 above/ [0S 7.
Detailed App Instructions Battery charging sign Ey we final comers Capo to sunlight, the battery will £773 During night ov fatty changed, the battery wil stay white. Tips : #f your battery sign will not Shaw comet WR signal strength status as aliove,piesse remove the solar panel Tips: Please make sure your caress and then insensible it ta the camera body.
Detailed App Instructions Eke to enter undo device settings. { Check page 20-24 for more dines} This icon the spot light during night. The spot light will tum on to recons a starlight collar video clip when there's mason detected byte camera. You can click it to switch to Infrared LESS “6 * night vision mode to disable spot light Carrier will record mason in black and whit video made. to manually be saved to BE Two-way Talk: Click | to speak ta visitors and hear what they say.
Detailed App Instructions SD Card Setting 1) Please turn on the cloud storage so that you can sync the camera time with your phone, Note: We suggest you to format the SD card to FAT in your app for the first use in i image flip You can choose Normal Rotate, Mirror or Mirror and rotate depends on your hardware installation way. The default is Normal.
BT LT Ta Scene mode You can choose to set it as Normal, back light compensation, night IR, High light compensation or Dynamic according to your actual light environment of installation place. Dermal: Natural! light at day time Back light compensation: Increase the level of exposure and brighten the whole scene. High light compensation: Reduce exposure and deal with overexposed images with lights. Dynamic: Brighten the light on dark areas and balance the over light areas in images.
Detailed App Instructions Active time 1) This is the time you could set for the motion detection video length recorded to micro sd card and cloud storage. 2) Always: If you choose this option you will not allow the camera enter into standby mode the camera will keep recording all the time until battery drains out.
Detailed App Instructions LED indicator When you choose Enable, the Blue LED will light up to indicate when you operate the camera as it should be. When you choose Disabled, the Blue LED will not light up to indicate the operations or trigger motions. It is recommended to set it as the default Power frequency Please choose 60 or SHIRAZ according to your local frequency. it's defaulted to BOHR for united states users.
How to save and delete videos 1. Videos can be saved in Cloud Storage: {1}. The videos of PIR activity You could save the videos of PIR activities in cloud storage, which can be used 30 days for free and then you have to pay for the services. and the videos in the Cloud can be playback in the app. 2. Videos can be saved in the SD card: {1}. The videos of PIR activity {2}. Tha videos of live viewing You could playback these videos in the app. switch between cloud and micro sd card 3.
More Settings 1. Cloud service: Click Cloud service and then choose the package to buy your cloud storage. Note: 1)Each camera will be bidden with one cloud storage not in account base) 2) you would ike to make a return for Somali cameras, please send email to: to refund your cloud fee. 2.My friends: Click it to Add a friend you want to share with your camera or check you shared account or shared with you camera list and make any permission modifications hers.
des se 3.Common settings: 1} Mute when viewing device: Switch to mute sound when live view camera as default 2) Mute when playback: Switch to mute sound when playback recorded videos as default 3) Default resolution: Click to change from SD to HD resolution as default 4) Alarm Vibrate: Switch to enable vibrate or not when notification comes in.