Model WS2-06E-201 WS2-08E-201 WS2-10E-201 WS2-12E-201 6,200 BTU 8,000 BTU 10,200 BTU 12,000 BTU Electronic Window Air Conditioner Operating Instructions AIR CONDITIONER 2MF3 File No. SA 12793 Air conditioner must be upright for 24 hours prior to operating. This ensures that the compressor will function as intended.
PURCHASE INFORMATION Thank you for choosing a Soleus Air Window Air Conditioner. This Owner’s Manual will provide you with valuable information necessary for the proper care and maintenance of your new product. Please take a few moments to thoroughly read the instructions and familiarize yourself with all the operational aspects of your new Soleus Air Window Air Conditioner. For your own records, please attach a copy of your sales receipt to this manual.
POWER CORD AND PLUG This air conditioner is equipped with an LCDI (Leakage Current Detection and Interruption) power cord and plug as required by US National Electric Code 440.65. This cord consists of a length of shielded flexible cord with no termination on the load side and a LCDI attachment plug on the line side.
PACKAGE CONTENTS • • • • • • • • Window Air Conditioner (1) Remote Control (1) AAA Battery (2) Top Mounting Rail (1) Insert Strip (1) Short Screw (8) Side Curtain (2) Sash Lock (2) • • • • • Foam Seal (1) Long Screw for Window Locking Bracket & Curtains (12) Curtain Lock (2) Owner’s Manual (1) Weather Insulation Board (2) Top Mounting Rail Remote Control Air Conditioner Side Curtain 2 AAA Batteries Foam Seal Top Mounting Rail Insert Strip Short Screw Owner’s Manual Long Screw Sash Lock Weathe
SPECIFICATIONS • Noise level is measured at a distance of 3.28 ft away from the front of the unit in cooling mode. • Power consumption is measured when the fan runs at the highest speed setting. • These specifications are for reference only. For actual data, please refer to the rating label on the back of the unit. Model WS2-06E-201 WS2-08E-201 1/115/60 1/115/60 6,200 8,000 Cooling Power Input (Watts) 495 667 Rated Current Cooling (Amperage) 4.3 6.5 CEER 12.
ELECTRICAL SAFETY WARNING: grounding prong!! Power supply cord with 3-prong grounding plug and current detection device DISCLAIMER ALL INFORMATION AND THE TECHNICAL SPECIFICATIONS PRESENTED IN THIS USER’S MANUAL ARE THE PRESENATION OF THE MANUFACTURER. SOLEUS N.A. HAS NOT CONDUCTED AN INDEPENDENT TEST TO VERIFY THE INFORMATION AND SPECIFICATIONS PRESENTED HEREWITHIN.
INSTALLATION Window Preparation Please read all instructions prior to installing your air conditioner. Two people are recommended to install this product. If a new electrical outlet is required, have the outlet installed by a qualified electrician before installing the unit. Before installing the unit, check the dimensions of your window to make sure the air conditioner will fit. This unit is made to fit inside a standard double-hung window.
INSTALLATION Top Rail Installation NOTE: Top Rail and the Side Panels are offset to provide the proper pitch to the rear of (5/16”). This is necessary for proper condensation utilization and drainage. If you are not using the side panels, the rear pitch must still be maintained. 1. Attach the top rail onto the top of the outer case using four short screws. Top mounting rail Curtain Installation 1. Insert the side curtains into the upper and lower rails of the air conditioner.
INSTALLATION Placing the Unit Inside a Normal Window Weather Insulation Board Installation 1. Set the unit in the window so that is centered. Place the unit so that front edge of the bottom rail is against the back edge of the sill. NOTE: The Weather Insulation Board adds an extra layer of insulation to keep air from passing through the sides of the window air conditioner. 2. Bring the window down so that the front edge of the top rail is in front of the window.
CONTROL PANEL Electronic Control Panel & Remote Control Note: This control panel display always shows the room temperature in Fan Mode except when setting the temperature and timer. Normal Operating Sounds You may hear a pinging noise caused by water hitting the condenser on rainy days, or when the humidity is high. This design feature helps remove moisture and improve efficiency. You may hear the thermostat click when the compressor cycles on and off.
REMOTE CONTROL LCD Display MODE SLEEP FAN HIGH ENERGY SAVER FAN MED TIMER FAN LOW C/ F CHILD LOCK MYTEMP MODE Battery Size: AAA - NOTE: Do not mix old and new batteries or different types of AAA batteries. .
OPERATION INSTRUCTIONS 1. ON/OFF - Press the button to turn the A/C on or off. When the unit is turned off, the Timer function will be cancelled. The set temperature will be saved. 2. MODE SELECTION - Press the MODE button repeatedly to cycle between the different modes: Auto, Cool/Energy Saver, Dry (Dehumidifier), and Fan. 3. TEMPERATURE SETTING - Press the ▼ button to decrease the temperature when the unit is on. Stop pressing the button when the desired temperature is displayed.
USE THE AIR CONDITIONER Freezing Conditions: This is a cooling only air conditioner. It is not designed for freezing outdoor conditions. It must not be used in freezing outdoor conditions. Remote Control: To ensure proper operation when using the remote control, aim the remote directly at the signal receiver on the air conditioner. • The remote control has a signal range up to 20 feet. • Make sure nothing is blocking the remote control signal from being received by the air conditioner.
USE AND CARE CARE AND CLEANING Clean your air conditioner to keep it looking new and to minimize dust build up. Air Filter Cleaning The air filter should be checked at least once every month to see if it needs cleaning. Trapped particles and dust can build up in the filter and may decrease airflow as well as cause the cooling coils to accumulate frost. To clean the air filter: 1. Remove the filter by pulling down on the indents of the filter door on the front of the unit (See FIG. 5). 2.
TROUBLESHOOTING PROBLEM The Air Conditioner will not start The Air Conditioner does not cool as it should The Air Conditioner is freezing up POSSIBLE CAUSES SOLUTIONS The air conditioner is unplugged • Make sure the air conditioner plug is pushed completely into the outlet. The fuse is blown/circuit breaker is tripped • Check the main fuse/circuit breaker box and replace the fuse or reset the breaker. Power failure • The unit will automatically restart when power is restored.
TROUBLESHOOTING PROBLEM POSSIBLE CAUSES SOLUTIONS Water is dripping outside Hot and humid weather • This is normal Water is dripping inside the room The air conditioner is not correctly tilted towards the outside • For proper water drainage, make sure the air conditioner is slightly tilted downward from the front of the unit to the rear.
LIMITED WARRANTY Two Year Components Limited Warranty Five Year Compressor Limited Warranty Soleus N.A. warrants the accompanying Soleus Air Air Conditioner to be free of defects in material and workmanship for the applications specified in its operation instruction for a period of TWO (2) years for components and FIVE (5) years for the compressor from the date of original retail purchase in the United States. If the unit exhibits a defect in normal use, Soleus N.A.