42” Oscillating Tower Fan with Remote Control OWNER’S MANUAL Model # FC1-42R-03 3149097
PLEASE READ AND SAVE THESE INSTRUCTIONS 42 IN. OSCILLATING TOWER FAN W/ REMOTE CONTROL Thank you for choosing a Soleus Air fan. This owner’s manual will provide you with valuable information necessary for the proper care and maintenance of your new product. Please take a few moments to thoroughly read the instructions and familiarize yourself with all the operational aspects of your new fan. For your own records, please attach a copy of your sales receipt to this manual.
10) Do not operate this or any appliance with a damaged cord, if the unit malfunctions, or if it has been dropped or damaged in any manner. Connect to properly polarized outlets only. 11) Do not cover the cord or place near heat sources. Keep the cord away from high traffic areas, and do not submerge in water. 12) Unplug the fan before moving, cleaning or making repairs.
This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse blows, unplug the product from the outlet. Replace the fuse per the instructions below and check the product. If the replacement fuse blows, a short-circuit may be present and the product should be discarded or returned to an authorized service facility for examination and/or repair. HOW TO REPLACE THE FUSE 1. Unplug the fan from the outlet. Place the plug on a firm, flat surface.
ASSEMBLY 1. First, put the pillar together. The pillar is made of two separate halves. Make sure to pass the power cord through the middle of the pillar before snapping the pillar pieces together. 2. Now, attach the pillar to the fan body using the included pillar screws. 3. Next, put the fan base together. Like the pillar, the fan base is made up of two separate halves. Make sure to pass the power cord through the middle of the fan base prior to sliding the base pieces together.
OPERATING INSTRUCTIONS Set the fan on a stable, level surface. Plug the cord into a standard 120V A/C outlet. Please refer to Fig. 2 on the next page. 1. POWERING ON THE FAN The fan can be turned on by pressing the POWER button on the fan control panel or using the supplied remote control. The POWER button is also used to turn the fan off. 2. FAN SPEED Press the SPEED button to select Low (L), Medium (M), or High (H) fan speed. 3. OSCILLATION The fan can operate in oscillation or stationary mode.
Fig. 2 CLEANING/MAINTENANCE • Turn the fan off and unplug the unit. • Clean the tower fan and base using a dry cloth. • Never use abrasive cleaning agents or solvents. This may cause damage or deterioration to the surface of the unit. • Do not immerse the fan in any form of liquid. Do not allow water to drip on or into the fan motor housing. STORAGE When not in use, store the fan in a cool, dry location. To prevent dust and dirt build-up, use the original packaging to repack the unit.
WARRANTY One Year Limited Warranty Soleus International Inc. warrants the accompanying Soleus Air FC1-42R-03 to be free from defects in material and workmanship for the applications specified in its operation instruction for a period of ONE (1) year from the date of original retail purchase in the United States. If the unit exhibits a defect in normal use, Soleus International, Inc.
