Submittal

PC80X - Premium Choice Fan
(Ceiling Mounted Ventilation Fans)
Typical Specications:
Ventilating fan shall be S&P PC80X mounted in the ceiling. The fan shall have a 5-year limited warranty. The fan shall be
HVI Certied at 0.1 inch water gauge for CFM performance above. Fan shall be AMCA Air & Sound Certied. The motor
shall be ETL and cETL Listed with impedance protection plus additional thermal protection. The fan shall be ENERGY
STAR
®
Qualied.
Duct
Size for
Test
CFM
Static
Pressure
(in W.G.)
Energy
E󰀩ciency
(CFM/Watts)
Watts
Power
(V/Hz)
Sones* Amps
4” 80/61
0.1/0.25
3.5 24.3
120/60
1
.27
6” 90/64 3.7 24.4 0.5
Duct
Dia.
Grille Size
(Sq. in inches)
Cabinet Size
(in Inches)
Unit Wgt.
(lbs)
W D H
4” or 6” 13 x 14 11-3/8 10-1/2 7-5/8 11
PC80X HVI Certied Performance
PC80X Dimensions
11-3/8"
10-1/2"
7-5/8"
14"
13"
Options & Accessories
• Contractor Packs (4-packs)
• Humidity Sensor, Plug-&-Play module
• Speed Control, Plug-&-Play module
• VOC/Humidity, Plug-&-Play module
• Lighted Grilles (CFL or LED)
• Motion Sensing Grille
• Motion Sensing Lighted Grille (CFL)
• Metal Grille
• Radiation Dampers
Duct
Size
Static
Pressure
CFM Sones* RPM
4” 0 102 1.3 800
4” 0.1 86 1.6 800
4” 0.25 59 2.4 800
6” 0 119 1.0 800
6” 0.1 89 1.3 800
6” 0.25 66 2.4 800
R
®
AIR
MOVEMENT
AND CONTROL
ASSOCIATION
INTERNATIONAL, INC.
AIR
PERFORMANCE
SOUND
and
PC80X AMCA Certied Performance
*The di󰀨erence between sone values certied by HVI for residential use
and by AMCA for commercial/industrial use is mainly due to the ANSI S3.4
procedures used to convert measured sound to perceived sound, and
because HVI and AMCA have di󰀨erent rules for rounding sone values. ANSI
S3.4 species a procedure for calculating loudness as perceived by a typical
listener under specic conditions. HVI establishes values in a spherical
free eld at a distance of 5 feet from the fan. AMCA establishes values in a
hemispherical free eld at a distance of 5 feet from the fan. It is not possible
to achieve an exact comparison of HVI and AMCA sone values.
All specications are subject to change without notice unless approved in submittal by S&P.
PC80X-SUBMITTAL_v.2 / 09-2018