Specification Sheet

Dimensions in Inches
Note: Dimensions are approximate due to normal tolerances in the manufacturing process. Estimated Free Area calculation is based upon the following
formula: MD[A+B+ (N x C)]/144. Free Area x FPM = CFM; actual performance may vary.
P: 800.961.7370
www.solerpalau-usa.com
502_Submittal_09/12
Subject to change unless approved in submittal by S&P USA
Ratings
• Maximum recommended velocity is 2,000 FPM
• Temperature - -40 F to 180 F
FEATURES
Frame
• 20 gauge galvanized steel.
• Tog-L-Loc and tabbed corners provide rigidity and
durability.
• Integrated weather stripping incorporated into frame for
additional strength and weather protection.
• Prepunch oblong mounting holes.
Blades
• 26gauge3105millnishaluminum.
• Felt seal on leading edge of blade for tight closure and
quiet operation.
• Center-mounted galvanized steel tie-rod connects
blades for uniform opening and closing.
• 304 stainless steel pivot pins and rivets
• Nylon bushings.
AUTOMATIC WALL SHUTTER-SINGLE PANEL
MODEL 502
A
B
FRONT VIEW
9/32” X 1/2” SLOTTED MOUNTING HOLES
5/8”
2”
2”
6”
EXHAUST
(OPEN)
2 1/4”
1 1/2”
AIR
FLOW
SIDE VIEW
Note: Above dimensions + or - normal tolerance of .0625"
Part No.
Panel Size
(A x B)
Est. Shipping
Weight (lbs)
502010 10 x 10 3.5
502012 12 x 12 4
502016 16 x 16 5.5
502020 20 x 20 7
502024 24 x 24 9.5