Safety Instructions

OFF
AC
OFF
ENET-HBNP-01
ENET-HBRP-01
ENET-HBCL-01
1 2 3 4
5
6
5MIN
1. Install the Antenna
Turn off inverter and DC
safety switch (if applicable).
SolarEdge Energy Net Plug-in Installation
1
2
1
1
2
2
2. Install and Connect the Plug-in
4
`
3
To avoid electric shock, refer to safety instructions in
inverter manual before removing inverter cover.
Turn off AC to inverter on
main service panel.
Wait five minutes.
Open inverter and Connection Unit (if
applicable) cover.
Clip antenna (supplied) to
heatsink fin.
Pass antenna cable through
communication gland.
1
Connect EnergyNet plug-in to socket
on communication board.
2
Connect antenna to EnergyNet plun-in.
Tie antenna cable to communication
board bracket with plastic tie
(supplied).
Mount inverter cover and Connection
Unit cover (if applicable). Tighten
screws to 8.4N⋅m/74lb⋅in.