User Guide

This is an alloy multi-function USB-C HUB adapter. It
mainly extends the USB-C interface of the source device
to HDMI x2, USB3.0X3, SD & Micro SD card reader and
USB-C charging port.
Note:
The USB-C source devices (mobile/notebook/tablet PC)
must support video output.
Product Introduction
Structure Diagram
Features
Note :
1. For Video output, USB-C source devices must support
video output.
2. Suggest charge for power supply to keep it work stable.
Connection
1. USB3.0: 5Gbps, 5V0.9A@4.5W
2. HDMI 1:
4Kx2K 60Hz / 3840x2160 max(work separately while source
is DP1.4)
4Kx2K 30Hz / 3840x2160 max(two HDMI work simultaneously)
3. HDMI 2: 4Kx2K 30Hz / 3840x2160 max（work separately or
simultaneously while source is DP1.2 or above）
4. SD / Micro SD
Read: 50-104MB/s, Write: 30-80MB/s,
Data transfer rates are subject to the speed of the memory
card i
tself and your computer's USB ports.
5. USB-C PD3.0: Upstream charging the source devices such as
Laptop/Notebook, Support 100W power in, charging limited to
87-96W for safety, affected by different firmware.
8 in 1 USB-C HUB to 2 x HDMI+
3 x USB3.0+SD+Micro SD +PD
ENGLISH
1. USB 3.0
2. 1
3. 2
4. SD & Micro SD
5. PD3.0
Storage Conditions
Ambient Operating Temperature: 0℃ to 70℃(32°F to 158°F)
Storage Temperature: -30℃ to 120℃(-22°F to 248°F)
Ambient Operating Humidity: 20%-80%RH
Storage Humidity: 20%-90%RH
FAQ
A. Why is there no video output?
1. Pls make sure your USB-C source devices support video output
2. Pls check the connection is good
3. Pls use standard HDMI cable
B. Why is there no audio output from HDMI port?
1. Pls make sure that there is audio output function on the monitor.
2. Pls set the external monitor as default audio output device.
C. Sometimes WiFi stopped working while hard disk connected to hub,
how to do?
R: 2.4G network is easily disturbed. You can switch to 5G network.
Or you can adjust the placement of the hard disk, move to suitable
place.
D. Win10 system, if one of display does not display, how to do
R: Right click desktop > Graphics Settings > Select One or More
Active Displays
E. If USB driver cannot be identified, how to do?
R: Restart the computer and reconnect the product
F. If speed is too slow when connect hard disk, how to do?
R1: Plug and pull out for more times
R2: Restart the computer and reconnect the hard disk
G. If display stopped after connect high current hard disk, how to
do?
R: Must be charged. Please supply power by power adapter.
Right click desktop >Graphics Settings >Display
General Settings
DisplayPort Topology
Single Display
Select One or More Active Displays
1
3
2
1.Clone mode
Color Settings
Multiple Settings
Custom Resolutions
Select Display Mode
Clone Display
Extended Desktop
Collage
Detect
Built-in Display
HDMI
Display
Source device
Right click desktop >Graphics Settings >Display
General Settings
DisplayPort Topology
Single Display
Select One or More Active Displays
2.Extended Desktop
Color Settings
Multiple Settings
Custom Resolutions
Select Display Mode
Clone Display
Extended Desktop
Collage
Detect
Built-in Display
1
3
2
1
1
1
Graphics Settings for win10
HDMI Display HDMI Display
HDMI Display
HDMI Display
HDMI Display
Right click desktop >Graphics Settings >Display
General Settings
DisplayPort Topology
Single Display
Select One or More Active Displays
3.Collage
Color Settings
Multiple Settings
Custom Resolutions
Select Display Mode
Clone Display
Extended Desktop
Collage
Detect
Built-in Display
Source device
1 2
Arrange Display
Horizontally
Vertically
Enable
Disable
HDMI Display HDMI Display
NOTE: For this mode, PC or Notebook's Video card MUST
support MST
HDMI Display
HDMI Display
1
2
2
Source device
HDMI Display HDMI Display
1
2
3
Source device
HDMI Display HDMI Display
Sound Effects
Name
Type
Internal Speaker
Digital Display
DisplayPort
Settings for the selected device:
The selected device has no output controls
Color
Gather Windows
Optimize for:
3840x2160
3360x1890
3200x1800
3008x1692
2560x1440
Show low resolution modes
Brightness
:
Apple logo>System Preferences
>Displays
Display
Digital Display
Best for Digital Display
Scaled
Automatically adjust brightness
Output
Input
Select a device for sound output:
Built
-
in
Mute
Output Volume
Apple logo>System Preferences
>Sound
Resolution Setting for Mac
Sound Setting for Mac
2.Extend Display
Apple logo>System Preferences
>Displays
Display
Night Shift
To rearrange the displays, drag them to the desired position.
To relocate the menu bar, drag it to a different display.
Mirror Di sp lays
Airplay Displays：
Off
Show mirroring options in the menu bar when available
Gather windows
Arrangement
Color
HDMI Display HDMI Display
2
Source device
2
1
1.Mirror Display
Apple logo>System Preferences
>Displays
Display
Night Shift
To rearrange the displays, drag them to the desired position.
To relocate the menu bar, drag it to a different display.
Mirror Di sp la ys
Airplay
Displays
：
Off
Show mirroring options in the menu bar when available
Gather windows
Arrangement
Color
1
1
1
Source device
HDMI Display HDMI Display
Graphics Settings for Mac
Select Playb ack device
Speaker/Headset
50
Digital Display Audio 1
Display Settings for win10
Display
Notifications&actions
Battery
Storage
Display
Power & Sleep
Tablet Mode
About
Resolution
1920x1080(推荐，3D)
1680x1050
(
3D
)
1600x900
(
3D
)
1440x900
(
3D
)
1400x1050
(
3D
)
1366x768
(
3D
)
1360x768
(
3D
)
1280x1024
(
3D
)
1280x960
(
3D
)
3D显示模式
开
Home
Find a Setting
System
1
3
2
Right click desktop >Display Settings
Select and rearrange dispalys
Select a display below to change its settings.
Some settings are applied to all displays.
Digital Display Audio 2
Sound Settings for win10
1
2
3
4
5
USB 3.0 x3
SD & Micro SD
U Flash Drive Keyboard Mouse
PD3.0