User's Manual

How to use
1 .IOS and ANDROID can search“”EndscopeTool“ in their app store accordingly。Or you can
scan QR code in user manual to select app fits your phone（if your ANDROID phone can not
reach googleplay,please click the last link to download app directly）。
2. Please give permission when you get prompt of requiring storge authority.
3.After installation, press power button for seconds to power on device, and the blue led
blinks to indicate hotspot is waitting for connection
4. Open app” EndscopeTool” and enable Wifi in your phone settings and connect to hotspot
“softish-xxx”.The first time you connect to hotspot “softish-xxxx” , please select ”keep using
current network” when you meet prompt like”current network can not reach internet,switch
to another?”,make sure your phone continues to use “softish-xxxx“ hotspot。
5. The blue led keeps solid on to indicate sucessful wifi connection，after connection you can
see battery level in app。
6.Click “Start” in app to enable video transmission. Press power button for 2 seconds to power
off device.
7.Press pump botton to start or stop spray water
8.When blue led blinks quickly ,please charge device for at least 1 hour
Indicator information
1.There’re two indicators inside, blue and red.
2.Red led indicates device is charging, it will power off afer fully charged
3.Blue led blinks slowly indictes no phone connectted
4. Blue led keeps solid on indictes phone connectted
5. Blue led blinks quickly indictes battery is running out.