Edge Lite User Manual Edge Lite User Manual v1.
Edge Lite User Manual by Softhard.io Limited Published Feb, 2018 Copyright 2018 Softhard.io Limited, All rights reserved. Softhard.io Limited makes no representations or warranties with respect to Edge Lite or to the contents or use of this manual, and specifically disclaims any express or implied warranties of merchantability of fitness for any particular purpose.
Edge Lite User Manual Edge Lite Manual v1.5 Copyright 2018 Softhard.IO Limited – All rights reserved Change Log Date Author Version Description 2018-11-27 Inky Lung v1.0 Initial draft 2019-3-15 Inky Lung v1.1 Add mounting instruction, battery replacement info. 2019-3-20 Inky Lung v1.2 Change battery pack description 2019-3-29 Inky Lung V1.3 Add installation location 2019-04-02 Inky Lung V1.4 Modified battery model name 2019-06-12 Kenny Lai V1.
Edge Lite User Manual 1. Introduction The Softhard.io Edge Series devices allow you to deploy Internet of Things networks in an easy and scalable way, ensuring minimum maintenance costs. The device consists of a robust waterproof enclosure with specific external sockets to connect different types of sensors. It has been specially designed to be scalable, easy to deploy and maintain. Besides, it equips with built in M2M modules such as LoRa, NB-IoT or Sigfox interfaces.
Edge Lite User Manual 2. General view Edge Lite is a NB-IoT device for measuring temperature, humidity, movement. With flexibility of adding external sensors like PIR, ultrasonic, IR, dry contact detection, it provides an easiest way for user to collect different types of data. Edge Lite has built in with 2 pieces 18650 size Lithium battery which the device can sustain to work for a year (depends on data transmission interval). 2.
Edge Lite User Manual 3. Installation Instructions To power on the Edge Lite, user is required to unscrew the 4 screws as indicated in the following photo. Open the cover, user can see the battery and the board. Connect the battery cable and power on the device.
Edge Lite User Manual Component Description
Edge Lite User Manual Mounting Instruction Edge Lite should be mounted on wall with 4 pieces M4 size screws with locations indicated in the following diagram. Mounting Location Edge Lite should be mounted on wall with suggested distance 1.5m from ground. Please notice user should not installed device near people with 30mm as of the RF transmittance effect.
Edge Lite User Manual Battery Replacement Pls use the battery pack provided by Softhard.IO Ltd when the battery pack is completely drained. The correct model is 18650 LG MH1. "Use only rechargeable batteries model 18650 LG MH1 supplied by Softhard.IO Ltd.", and statement“CAUTION: Risk of explosion if battery is replaced by incorrect type disposed of used batteries according to the instruction.
Edge Lite User Manual 4. Operations LED indications Here are indications of the LED with different scenarios. Description LED Status Green LED and Red LED Flashing Checking M2M RF module Blue LED Flashing Connecting or Sending Data to Network Blue LED Fast Flashing Successfully Joined Network Red LED Flashing Event Detected, eg. Dry Contact, G-Sensor System Default Setting Device is configured with the following default setup when it is shipped.
Edge Lite User Manual PART 15 INFORMATION TO THE USER FCC Class B Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
